diff options
Diffstat (limited to 'drivers/staging/comedi/drivers/usbdux.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/usbdux.c | 26 |
1 files changed, 15 insertions, 11 deletions
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index cca4e869f0ec..06c020466298 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -1,4 +1,4 @@ -#define DRIVER_VERSION "v2.2" +#define DRIVER_VERSION "v2.3" #define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" #define DRIVER_DESC "Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com" /* @@ -80,6 +80,7 @@ sampling rate. If you sample two channels you get 4kHz and so on. * 2.0: PWM seems to be stable and is not interfering with the other functions * 2.1: changed PWM API * 2.2: added firmware kernel request to fix an udev problem + * 2.3: corrected a bug in bulk timeouts which were far too short * */ @@ -101,8 +102,8 @@ sampling rate. If you sample two channels you get 4kHz and so on. #define BOARDNAME "usbdux" -/* timeout for the USB-transfer */ -#define EZTIMEOUT 30 +/* timeout for the USB-transfer in ms*/ +#define BULK_TIMEOUT 1000 /* constants for "firmware" upload and download */ #define USBDUXSUB_FIRMWARE 0xA0 @@ -750,7 +751,7 @@ static int usbduxsub_start(struct usbduxsub *usbduxsub) /* Length */ 1, /* Timeout */ - EZTIMEOUT); + BULK_TIMEOUT); if (errcode < 0) { dev_err(&usbduxsub->interface->dev, "comedi_: control msg failed (start)\n"); @@ -780,7 +781,7 @@ static int usbduxsub_stop(struct usbduxsub *usbduxsub) /* Length */ 1, /* Timeout */ - EZTIMEOUT); + BULK_TIMEOUT); if (errcode < 0) { dev_err(&usbduxsub->interface->dev, "comedi_: control msg failed (stop)\n"); @@ -810,7 +811,7 @@ static int usbduxsub_upload(struct usbduxsub *usbduxsub, /* length */ len, /* timeout */ - EZTIMEOUT); + BULK_TIMEOUT); dev_dbg(&usbduxsub->interface->dev, "comedi_: result=%d\n", errcode); if (errcode < 0) { dev_err(&usbduxsub->interface->dev, "comedi_: upload failed\n"); @@ -979,7 +980,7 @@ static int usbdux_ai_cmdtest(struct comedi_device *dev, /* * step 2: make sure trigger sources are unique and mutually compatible - * note that mutual compatiblity is not an issue here + * note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->scan_begin_src != TRIG_EXT && @@ -1110,7 +1111,7 @@ static int send_dux_commands(struct usbduxsub *this_usbduxsub, int cmd_type) usb_sndbulkpipe(this_usbduxsub->usbdev, COMMAND_OUT_EP), this_usbduxsub->dux_commands, SIZEOFDUXBUFFER, - &nsent, 10); + &nsent, BULK_TIMEOUT); if (result < 0) dev_err(&this_usbduxsub->interface->dev, "comedi%d: " "could not transmit dux_command to the usb-device, " @@ -1130,7 +1131,7 @@ static int receive_dux_commands(struct usbduxsub *this_usbduxsub, int command) usb_rcvbulkpipe(this_usbduxsub->usbdev, COMMAND_IN_EP), this_usbduxsub->insnBuffer, SIZEINSNBUF, - &nrec, 1); + &nrec, BULK_TIMEOUT); if (result < 0) { dev_err(&this_usbduxsub->interface->dev, "comedi%d: " "insn: USB error %d while receiving DUX command" @@ -1557,7 +1558,7 @@ static int usbdux_ao_cmdtest(struct comedi_device *dev, /* * step 2: make sure trigger sources are unique and mutually compatible - * note that mutual compatiblity is not an issue here + * note that mutual compatibility is not an issue here */ if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->scan_begin_src != TRIG_EXT && @@ -2327,9 +2328,11 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw, if (ret) { dev_err(&usbdev->dev, "Could not upload firmware (err=%d)\n", ret); - return; + goto out; } comedi_usb_auto_config(usbdev, BOARDNAME); + out: + release_firmware(fw); } /* allocate memory for the urbs and initialise them */ @@ -2580,6 +2583,7 @@ static int usbduxsub_probe(struct usb_interface *uinterf, FW_ACTION_HOTPLUG, "usbdux_firmware.bin", &udev->dev, + GFP_KERNEL, usbduxsub + index, usbdux_firmware_request_complete_handler); |