1 files changed, 110 insertions, 0 deletions
diff --git a/drivers/staging/nokia_h4p/nokia_fw-ti1273.c b/drivers/staging/nokia_h4p/nokia_fw-ti1273.c
new file mode 100644
index 000000000000..f5500f71c839
--- /dev/null
+++ b/drivers/staging/nokia_h4p/nokia_fw-ti1273.c
@@ -0,0 +1,110 @@
+/*
+ * This file is part of Nokia H4P bluetooth driver
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/serial_reg.h>
+
+#include "hci_h4p.h"
+
+static struct sk_buff_head *fw_q;
+
+void hci_h4p_ti1273_parse_fw_event(struct hci_h4p_info *info,
+			struct sk_buff *skb)
+{
+	struct sk_buff *fw_skb;
+	unsigned long flags;
+
+	if (skb->data[5] != 0x00) {
+		dev_err(info->dev, "Firmware sending command failed 0x%.2x\n",
+			skb->data[5]);
+		info->fw_error = -EPROTO;
+	}
+
+	kfree_skb(skb);
+
+	fw_skb = skb_dequeue(fw_q);
+	if (fw_skb == NULL || info->fw_error) {
+		complete(&info->fw_completion);
+		return;
+	}
+
+	skb_queue_tail(&info->txq, fw_skb);
+	spin_lock_irqsave(&info->lock, flags);
+	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
+			UART_IER_THRI);
+	spin_unlock_irqrestore(&info->lock, flags);
+}
+
+
+int hci_h4p_ti1273_send_fw(struct hci_h4p_info *info,
+			struct sk_buff_head *fw_queue)
+{
+	struct sk_buff *skb;
+	unsigned long flags, time;
+
+	info->fw_error = 0;
+
+	BT_DBG("Sending firmware");
+
+	time = jiffies;
+
+	fw_q = fw_queue;
+	skb = skb_dequeue(fw_queue);
+	if (!skb)
+		return -ENODATA;
+
+	BT_DBG("Sending commands");
+	/* Check if this is bd_address packet */
+	init_completion(&info->fw_completion);
+	hci_h4p_smart_idle(info, 0);
+	skb_queue_tail(&info->txq, skb);
+	spin_lock_irqsave(&info->lock, flags);
+	hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) |
+			UART_IER_THRI);
+	spin_unlock_irqrestore(&info->lock, flags);
+
+	if (!wait_for_completion_timeout(&info->fw_completion,
+				msecs_to_jiffies(2000))) {
+		dev_err(info->dev, "No reply to fw command\n");
+		return -ETIMEDOUT;
+	}
+
+	if (info->fw_error) {
+		dev_err(info->dev, "FW error\n");
+		return -EPROTO;
+	}
+
+	BT_DBG("Firmware sent in %d msecs",
+		   jiffies_to_msecs(jiffies-time));
+
+	hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS);
+	hci_h4p_set_rts(info, 0);
+	hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE);
+	if (hci_h4p_wait_for_cts(info, 1, 100)) {
+		dev_err(info->dev,
+			"cts didn't go down after final speed change\n");
+		return -ETIMEDOUT;
+	}
+	hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS);
+
+	return 0;
+}