diff options
Diffstat (limited to 'drivers/staging/octeon/cvmx-config.h')
-rw-r--r-- | drivers/staging/octeon/cvmx-config.h | 169 |
1 files changed, 0 insertions, 169 deletions
diff --git a/drivers/staging/octeon/cvmx-config.h b/drivers/staging/octeon/cvmx-config.h deleted file mode 100644 index 078a520481cf..000000000000 --- a/drivers/staging/octeon/cvmx-config.h +++ /dev/null @@ -1,169 +0,0 @@ -#ifndef __CVMX_CONFIG_H__ -#define __CVMX_CONFIG_H__ - -/************************* Config Specific Defines ************************/ -#define CVMX_LLM_NUM_PORTS 1 -#define CVMX_NULL_POINTER_PROTECT 1 -#define CVMX_ENABLE_DEBUG_PRINTS 1 -/* PKO queues per port for interface 0 (ports 0-15) */ -#define CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 1 -/* PKO queues per port for interface 1 (ports 16-31) */ -#define CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 1 -/* Limit on the number of PKO ports enabled for interface 0 */ -#define CVMX_PKO_MAX_PORTS_INTERFACE0 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 -/* Limit on the number of PKO ports enabled for interface 1 */ -#define CVMX_PKO_MAX_PORTS_INTERFACE1 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 -/* PKO queues per port for PCI (ports 32-35) */ -#define CVMX_PKO_QUEUES_PER_PORT_PCI 1 -/* PKO queues per port for Loop devices (ports 36-39) */ -#define CVMX_PKO_QUEUES_PER_PORT_LOOP 1 - -/************************* FPA allocation *********************************/ -/* Pool sizes in bytes, must be multiple of a cache line */ -#define CVMX_FPA_POOL_0_SIZE (16 * CVMX_CACHE_LINE_SIZE) -#define CVMX_FPA_POOL_1_SIZE (1 * CVMX_CACHE_LINE_SIZE) -#define CVMX_FPA_POOL_2_SIZE (8 * CVMX_CACHE_LINE_SIZE) -#define CVMX_FPA_POOL_3_SIZE (0 * CVMX_CACHE_LINE_SIZE) -#define CVMX_FPA_POOL_4_SIZE (0 * CVMX_CACHE_LINE_SIZE) -#define CVMX_FPA_POOL_5_SIZE (0 * CVMX_CACHE_LINE_SIZE) -#define CVMX_FPA_POOL_6_SIZE (0 * CVMX_CACHE_LINE_SIZE) -#define CVMX_FPA_POOL_7_SIZE (0 * CVMX_CACHE_LINE_SIZE) - -/* Pools in use */ -/* Packet buffers */ -#define CVMX_FPA_PACKET_POOL (0) -#define CVMX_FPA_PACKET_POOL_SIZE CVMX_FPA_POOL_0_SIZE -/* Work queue entrys */ -#define CVMX_FPA_WQE_POOL (1) -#define CVMX_FPA_WQE_POOL_SIZE CVMX_FPA_POOL_1_SIZE -/* PKO queue command buffers */ -#define CVMX_FPA_OUTPUT_BUFFER_POOL (2) -#define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE CVMX_FPA_POOL_2_SIZE - -/************************* FAU allocation ********************************/ -/* The fetch and add registers are allocated here. They are arranged - * in order of descending size so that all alignment constraints are - * automatically met. The enums are linked so that the following enum - * continues allocating where the previous one left off, so the - * numbering within each enum always starts with zero. The macros - * take care of the address increment size, so the values entered - * always increase by 1. FAU registers are accessed with byte - * addresses. - */ - -#define CVMX_FAU_REG_64_ADDR(x) ((x << 3) + CVMX_FAU_REG_64_START) -typedef enum { - CVMX_FAU_REG_64_START = 0, - CVMX_FAU_REG_64_END = CVMX_FAU_REG_64_ADDR(0), -} cvmx_fau_reg_64_t; - -#define CVMX_FAU_REG_32_ADDR(x) ((x << 2) + CVMX_FAU_REG_32_START) -typedef enum { - CVMX_FAU_REG_32_START = CVMX_FAU_REG_64_END, - CVMX_FAU_REG_32_END = CVMX_FAU_REG_32_ADDR(0), -} cvmx_fau_reg_32_t; - -#define CVMX_FAU_REG_16_ADDR(x) ((x << 1) + CVMX_FAU_REG_16_START) -typedef enum { - CVMX_FAU_REG_16_START = CVMX_FAU_REG_32_END, - CVMX_FAU_REG_16_END = CVMX_FAU_REG_16_ADDR(0), -} cvmx_fau_reg_16_t; - -#define CVMX_FAU_REG_8_ADDR(x) ((x) + CVMX_FAU_REG_8_START) -typedef enum { - CVMX_FAU_REG_8_START = CVMX_FAU_REG_16_END, - CVMX_FAU_REG_8_END = CVMX_FAU_REG_8_ADDR(0), -} cvmx_fau_reg_8_t; - -/* - * The name CVMX_FAU_REG_AVAIL_BASE is provided to indicate the first - * available FAU address that is not allocated in cvmx-config.h. This - * is 64 bit aligned. - */ -#define CVMX_FAU_REG_AVAIL_BASE ((CVMX_FAU_REG_8_END + 0x7) & (~0x7ULL)) -#define CVMX_FAU_REG_END (2048) - -/********************** scratch memory allocation *************************/ -/* Scratchpad memory allocation. Note that these are byte memory - * addresses. Some uses of scratchpad (IOBDMA for example) require - * the use of 8-byte aligned addresses, so proper alignment needs to - * be taken into account. - */ -/* Generic scratch iobdma area */ -#define CVMX_SCR_SCRATCH (0) -/* First location available after cvmx-config.h allocated region. */ -#define CVMX_SCR_REG_AVAIL_BASE (8) - -/* - * CVMX_HELPER_FIRST_MBUFF_SKIP is the number of bytes to reserve - * before the beginning of the packet. If necessary, override the - * default here. See the IPD section of the hardware manual for MBUFF - * SKIP details. - */ -#define CVMX_HELPER_FIRST_MBUFF_SKIP 184 - -/* - * CVMX_HELPER_NOT_FIRST_MBUFF_SKIP is the number of bytes to reserve - * in each chained packet element. If necessary, override the default - * here. - */ -#define CVMX_HELPER_NOT_FIRST_MBUFF_SKIP 0 - -/* - * CVMX_HELPER_ENABLE_BACK_PRESSURE controls whether back pressure is - * enabled for all input ports. This controls if IPD sends - * backpressure to all ports if Octeon's FPA pools don't have enough - * packet or work queue entries. Even when this is off, it is still - * possible to get backpressure from individual hardware ports. When - * configuring backpressure, also check - * CVMX_HELPER_DISABLE_*_BACKPRESSURE below. If necessary, override - * the default here. - */ -#define CVMX_HELPER_ENABLE_BACK_PRESSURE 1 - -/* - * CVMX_HELPER_ENABLE_IPD controls if the IPD is enabled in the helper - * function. Once it is enabled the hardware starts accepting - * packets. You might want to skip the IPD enable if configuration - * changes are need from the default helper setup. If necessary, - * override the default here. - */ -#define CVMX_HELPER_ENABLE_IPD 0 - -/* - * CVMX_HELPER_INPUT_TAG_TYPE selects the type of tag that the IPD assigns - * to incoming packets. - */ -#define CVMX_HELPER_INPUT_TAG_TYPE CVMX_POW_TAG_TYPE_ORDERED - -#define CVMX_ENABLE_PARAMETER_CHECKING 0 - -/* - * The following select which fields are used by the PIP to generate - * the tag on INPUT - * 0: don't include - * 1: include - */ -#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP 0 -#define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP 0 -#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT 0 -#define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT 0 -#define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER 0 -#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP 0 -#define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP 0 -#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT 0 -#define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT 0 -#define CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL 0 -#define CVMX_HELPER_INPUT_TAG_INPUT_PORT 1 - -/* Select skip mode for input ports */ -#define CVMX_HELPER_INPUT_PORT_SKIP_MODE CVMX_PIP_PORT_CFG_MODE_SKIPL2 - -/* - * Force backpressure to be disabled. This overrides all other - * backpressure configuration. - */ -#define CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE 0 - -#endif /* __CVMX_CONFIG_H__ */ - |