diff options
Diffstat (limited to 'drivers/staging/rtl8192u/r819xU_HTType.h')
| -rw-r--r-- | drivers/staging/rtl8192u/r819xU_HTType.h | 379 |
1 files changed, 0 insertions, 379 deletions
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h deleted file mode 100644 index 2cbb8e6584f8..000000000000 --- a/drivers/staging/rtl8192u/r819xU_HTType.h +++ /dev/null @@ -1,379 +0,0 @@ -#ifndef _R819XU_HTTYPE_H_ -#define _R819XU_HTTYPE_H_ - - -/*---------------------------------------------------------------------- - * The HT Capability element is present in beacons, association request, - * reassociation request and probe response frames - *----------------------------------------------------------------------*/ - -/* Operation mode value */ -#define HT_OPMODE_NO_PROTECT 0 -#define HT_OPMODE_OPTIONAL 1 -#define HT_OPMODE_40MHZ_PROTECT 2 -#define HT_OPMODE_MIXED 3 - -/* MIMO Power Save Settings */ -#define MIMO_PS_STATIC 0 -#define MIMO_PS_DYNAMIC 1 -#define MIMO_PS_NOLIMIT 3 - - -/* There should be 128 bits to cover all of the MCS rates. However, since - * 8190 does not support too much rates, one integer is quite enough. */ - -#define sHTCLng 4 - - -#define HT_SUPPORTED_MCS_1SS_BITMAP 0x000000ff -#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00 -#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP \ - (HT_MCS_1SS_BITMAP | HT_MCS_1SS_2SS_BITMAP) - - -typedef enum _HT_MCS_RATE { - HT_MCS0 = 0x00000001, - HT_MCS1 = 0x00000002, - HT_MCS2 = 0x00000004, - HT_MCS3 = 0x00000008, - HT_MCS4 = 0x00000010, - HT_MCS5 = 0x00000020, - HT_MCS6 = 0x00000040, - HT_MCS7 = 0x00000080, - HT_MCS8 = 0x00000100, - HT_MCS9 = 0x00000200, - HT_MCS10 = 0x00000400, - HT_MCS11 = 0x00000800, - HT_MCS12 = 0x00001000, - HT_MCS13 = 0x00002000, - HT_MCS14 = 0x00004000, - HT_MCS15 = 0x00008000, - /* Do not define MCS32 here although 8190 support MCS32 */ -} HT_MCS_RATE, *PHT_MCS_RATE; - -/* Represent Channel Width in HT Capabilities */ -typedef enum _HT_CHANNEL_WIDTH { - HT_CHANNEL_WIDTH_20 = 0, - HT_CHANNEL_WIDTH_20_40 = 1, -} HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; - -/* Represent Extension Channel Offset in HT Capabilities - * This is available only in 40Mhz mode. */ -typedef enum _HT_EXTCHNL_OFFSET { - HT_EXTCHNL_OFFSET_NO_EXT = 0, - HT_EXTCHNL_OFFSET_UPPER = 1, - HT_EXTCHNL_OFFSET_NO_DEF = 2, - HT_EXTCHNL_OFFSET_LOWER = 3, -} HT_EXTCHNL_OFFSET, *PHT_EXTCHNL_OFFSET; - -typedef enum _CHNLOP { - CHNLOP_NONE = 0, /* No Action now */ - CHNLOP_SCAN = 1, /* Scan in progress */ - CHNLOP_SWBW = 2, /* Bandwidth switching in progress */ - CHNLOP_SWCHNL = 3, /* Software Channel switching in progress */ -} CHNLOP, *PCHNLOP; - -/* Determine if the Channel Operation is in progress */ -#define CHHLOP_IN_PROGRESS(_pHTInfo) \ - (((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE) - - -typedef enum _HT_ACTION { - ACT_RECOMMAND_WIDTH = 0, - ACT_MIMO_PWR_SAVE = 1, - ACT_PSMP = 2, - ACT_SET_PCO_PHASE = 3, - ACT_MIMO_CHL_MEASURE = 4, - ACT_RECIPROCITY_CORRECT = 5, - ACT_MIMO_CSI_MATRICS = 6, - ACT_MIMO_NOCOMPR_STEER = 7, - ACT_MIMO_COMPR_STEER = 8, - ACT_ANTENNA_SELECT = 9, -} HT_ACTION, *PHT_ACTION; - - -/* Define sub-carrier mode for 40MHZ. */ -typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier { - SC_MODE_DUPLICATE = 0, - SC_MODE_LOWER = 1, - SC_MODE_UPPER = 2, - SC_MODE_FULL40MHZ = 3, -} HT_BW40_SC_E; - -typedef struct _HT_CAPABILITY_ELE { - - /* HT capability info */ - u8 AdvCoding:1; - u8 ChlWidth:1; - u8 MimoPwrSave:2; - u8 GreenField:1; - u8 ShortGI20Mhz:1; - u8 ShortGI40Mhz:1; - u8 TxSTBC:1; - u8 RxSTBC:2; - u8 DelayBA:1; - u8 MaxAMSDUSize:1; - u8 DssCCk:1; - u8 PSMP:1; - u8 Rsvd1:1; - u8 LSigTxopProtect:1; - - /* MAC HT parameters info */ - u8 MaxRxAMPDUFactor:2; - u8 MPDUDensity:3; - u8 Rsvd2:3; - - /* Supported MCS set */ - u8 MCS[16]; - - - /* Extended HT Capability Info */ - u16 ExtHTCapInfo; - - /* TXBF Capabilities */ - u8 TxBFCap[4]; - - /* Antenna Selection Capabilities */ - u8 ASCap; - -} __packed HT_CAPABILITY_ELE, *PHT_CAPABILITY_ELE; - -/*------------------------------------------------------------ - * The HT Information element is present in beacons - * Only AP is required to include this element - *------------------------------------------------------------*/ - -typedef struct _HT_INFORMATION_ELE { - u8 ControlChl; - - u8 ExtChlOffset:2; - u8 RecommemdedTxWidth:1; - u8 RIFS:1; - u8 PSMPAccessOnly:1; - u8 SrvIntGranularity:3; - - u8 OptMode:2; - u8 NonGFDevPresent:1; - u8 Revd1:5; - u8 Revd2:8; - - u8 Rsvd3:6; - u8 DualBeacon:1; - u8 DualCTSProtect:1; - - u8 SecondaryBeacon:1; - u8 LSigTxopProtectFull:1; - u8 PcoActive:1; - u8 PcoPhase:1; - u8 Rsvd4:4; - - u8 BasicMSC[16]; -} __packed HT_INFORMATION_ELE, *PHT_INFORMATION_ELE; - -/* MIMO Power Save control field. - * This is appear in MIMO Power Save Action Frame */ -typedef struct _MIMOPS_CTRL { - u8 MimoPsEnable:1; - u8 MimoPsMode:1; - u8 Reserved:6; -} MIMOPS_CTRL, *PMIMOPS_CTRL; - -typedef enum _HT_SPEC_VER { - HT_SPEC_VER_IEEE = 0, - HT_SPEC_VER_EWC = 1, -} HT_SPEC_VER, *PHT_SPEC_VER; - -typedef enum _HT_AGGRE_MODE_E { - HT_AGG_AUTO = 0, - HT_AGG_FORCE_ENABLE = 1, - HT_AGG_FORCE_DISABLE = 2, -} HT_AGGRE_MODE_E, *PHT_AGGRE_MODE_E; - -/*---------------------------------------------------------------------------- - * The Data structure is used to keep HT related variables when card is - * configured as non-AP STA mode. - * **Note** Current_xxx should be set to default value in HTInitializeHTInfo() - *----------------------------------------------------------------------------*/ - -typedef struct _RT_HIGH_THROUGHPUT { - u8 bEnableHT; - u8 bCurrentHTSupport; - /* Tx 40MHz channel capability */ - u8 bRegBW40MHz; - u8 bCurBW40MHz; - /* Tx Short GI for 40Mhz */ - u8 bRegShortGI40MHz; - u8 bCurShortGI40MHz; - /* Tx Short GI for 20MHz */ - u8 bRegShortGI20MHz; - u8 bCurShortGI20MHz; - /* Tx CCK rate capability */ - u8 bRegSuppCCK; - u8 bCurSuppCCK; - - /* 802.11n spec version for "peer" */ - HT_SPEC_VER ePeerHTSpecVer; - - - /* HT related information for "Self" */ - /* This is HT cap element sent to peer STA, which also indicate - * HT Rx capabilities. */ - HT_CAPABILITY_ELE SelfHTCap; - HT_INFORMATION_ELE SelfHTInfo; - - /* HT related information for "Peer" */ - u8 PeerHTCapBuf[32]; - u8 PeerHTInfoBuf[32]; - - - /* A-MSDU related */ - /* This indicates Tx A-MSDU capability */ - u8 bAMSDU_Support; - u16 nAMSDU_MaxSize; - u8 bCurrent_AMSDU_Support; - u16 nCurrent_AMSDU_MaxSize; - - - /* A-MPDU related */ - /* This indicate Tx A-MPDU capability */ - u8 bAMPDUEnable; - u8 bCurrentAMPDUEnable; - u8 AMPDU_Factor; - u8 CurrentAMPDUFactor; - u8 MPDU_Density; - u8 CurrentMPDUDensity; - - /* Forced A-MPDU enable */ - HT_AGGRE_MODE_E ForcedAMPDUMode; - u8 ForcedAMPDUFactor; - u8 ForcedMPDUDensity; - - /* Forced A-MSDU enable */ - HT_AGGRE_MODE_E ForcedAMSDUMode; - u16 ForcedAMSDUMaxSize; - - u8 bForcedShortGI; - - u8 CurrentOpMode; - - /* MIMO PS related */ - u8 SelfMimoPs; - u8 PeerMimoPs; - - /* 40MHz Channel Offset settings. */ - HT_EXTCHNL_OFFSET CurSTAExtChnlOffset; - u8 bCurTxBW40MHz; /* If we use 40 MHz to Tx */ - u8 PeerBandwidth; - - /* For Bandwidth Switching */ - u8 bSwBwInProgress; - CHNLOP ChnlOp; /* sw switching channel in progress. */ - u8 SwBwStep; - struct timer_list SwBwTimer; - - /* For Realtek proprietary A-MPDU factor for aggregation */ - u8 bRegRT2RTAggregation; - u8 bCurrentRT2RTAggregation; - u8 bCurrentRT2RTLongSlotTime; - u8 szRT2RTAggBuffer[10]; - - /* Rx Reorder control */ - u8 bRegRxReorderEnable; - u8 bCurRxReorderEnable; - u8 RxReorderWinSize; - u8 RxReorderPendingTime; - u16 RxReorderDropCounter; - -#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE - u8 UsbTxAggrNum; -#endif -#ifdef USB_RX_AGGREGATION_SUPPORT - u8 UsbRxFwAggrEn; - u8 UsbRxFwAggrPageNum; - u8 UsbRxFwAggrPacketNum; - u8 UsbRxFwAggrTimeout; -#endif - - /* Add for Broadcom(Linksys) IOT. */ - u8 bIsPeerBcm; - - /* For IOT issue. */ - u32 IOTAction; -} RT_HIGH_THROUGHPUT, *PRT_HIGH_THROUGHPUT; - - -/*---------------------------------------------------------------------- - * The Data structure is used to keep HT related variable for "each Sta" - * when card is configured as "AP mode" - *----------------------------------------------------------------------*/ - -typedef struct _RT_HTINFO_STA_ENTRY { - u8 bEnableHT; - - u8 bSupportCck; - - u16 AMSDU_MaxSize; - - u8 AMPDU_Factor; - u8 MPDU_Density; - - u8 HTHighestOperaRate; - - u8 bBw40MHz; - - u8 MimoPs; - - u8 McsRateSet[16]; - - -} RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY; - - - - - -/*--------------------------------------------------------------------- - * The Data structure is used to keep HT related variable for "each AP" - * when card is configured as "STA mode" - *---------------------------------------------------------------------*/ - -typedef struct _BSS_HT { - - u8 bdSupportHT; - - /* HT related elements */ - u8 bdHTCapBuf[32]; - u16 bdHTCapLen; - u8 bdHTInfoBuf[32]; - u16 bdHTInfoLen; - - HT_SPEC_VER bdHTSpecVer; - - u8 bdRT2RTAggregation; - u8 bdRT2RTLongSlotTime; -} BSS_HT, *PBSS_HT; - -typedef struct _MIMO_RSSI { - u32 EnableAntenna; - u32 AntennaA; - u32 AntennaB; - u32 AntennaC; - u32 AntennaD; - u32 Average; -} MIMO_RSSI, *PMIMO_RSSI; - -typedef struct _MIMO_EVM { - u32 EVM1; - u32 EVM2; -} MIMO_EVM, *PMIMO_EVM; - -typedef struct _FALSE_ALARM_STATISTICS { - u32 Cnt_Parity_Fail; - u32 Cnt_Rate_Illegal; - u32 Cnt_Crc8_fail; - u32 Cnt_all; -} FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS; - - - -#endif |