diff options
Diffstat (limited to 'drivers/staging/rtl8712/rtl871x_cmd.h')
| -rw-r--r-- | drivers/staging/rtl8712/rtl871x_cmd.h | 277 |
1 files changed, 140 insertions, 137 deletions
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h index e4a2a50c85de..3284dcf2f1a9 100644 --- a/drivers/staging/rtl8712/rtl871x_cmd.h +++ b/drivers/staging/rtl8712/rtl871x_cmd.h @@ -50,8 +50,8 @@ struct cmd_obj { }; struct cmd_priv { - struct semaphore cmd_queue_sema; - struct semaphore terminate_cmdthread_sema; + struct completion cmd_queue_comp; + struct completion terminate_cmdthread_comp; struct __queue cmd_queue; u8 cmd_seq; u8 *cmd_buf; /*shall be non-paged, and 4 bytes aligned*/ @@ -185,10 +185,12 @@ struct setauth_parm { */ struct setkey_parm { u8 algorithm; /* encryption algorithm, could be none, wep40, - * TKIP, CCMP, wep104 */ + * TKIP, CCMP, wep104 + */ u8 keyid; u8 grpkey; /* 1: this is the grpkey for 802.1x. - * 0: this is the unicast key for 802.1x */ + * 0: this is the unicast key for 802.1x + */ u8 key[16]; /* this could be 40 or 104 */ }; @@ -215,15 +217,15 @@ struct SetMacAddr_param { }; /* -Caller Ad-Hoc/AP - -Command -Rsp(AID == CAMID) mode - -This is to force fw to add an sta_data entry per driver's request. - -FW will write an cam entry associated with it. - -*/ + * Caller Ad-Hoc/AP + * + * Command -Rsp(AID == CAMID) mode + * + * This is to force fw to add an sta_data entry per driver's request. + * + * FW will write an cam entry associated with it. + * + */ struct set_assocsta_parm { u8 addr[ETH_ALEN]; }; @@ -234,27 +236,27 @@ struct set_assocsta_rsp { }; /* - Caller Ad-Hoc/AP - - Command mode - - This is to force fw to del an sta_data entry per driver's request - - FW will invalidate the cam entry associated with it. - -*/ + * Caller Ad-Hoc/AP + * + * Command mode + * + * This is to force fw to del an sta_data entry per driver's request + * + * FW will invalidate the cam entry associated with it. + * + */ struct del_assocsta_parm { u8 addr[ETH_ALEN]; }; /* -Caller Mode: AP/Ad-HoC(M) - -Notes: To notify fw that given staid has changed its power state - -Command Mode - -*/ + * Caller Mode: AP/Ad-HoC(M) + * + * Notes: To notify fw that given staid has changed its power state + * + * Command Mode + * + */ struct setstapwrstate_parm { u8 staid; u8 status; @@ -262,25 +264,25 @@ struct setstapwrstate_parm { }; /* -Caller Mode: Any - -Notes: To setup the basic rate of RTL8711 - -Command Mode - -*/ + * Caller Mode: Any + * + * Notes: To setup the basic rate of RTL8711 + * + * Command Mode + * + */ struct setbasicrate_parm { u8 basicrates[NumRates]; }; /* -Caller Mode: Any - -Notes: To read the current basic rate - -Command-Rsp Mode - -*/ + * Caller Mode: Any + * + * Notes: To read the current basic rate + * + * Command-Rsp Mode + * + */ struct getbasicrate_parm { u32 rsvd; }; @@ -290,13 +292,13 @@ struct getbasicrate_rsp { }; /* -Caller Mode: Any - -Notes: To setup the data rate of RTL8711 - -Command Mode - -*/ + * Caller Mode: Any + * + * Notes: To setup the data rate of RTL8711 + * + * Command Mode + * + */ struct setdatarate_parm { u8 mac_id; u8 datarates[NumRates]; @@ -332,13 +334,13 @@ struct SetChannelPlan_param { }; /* -Caller Mode: Any - -Notes: To read the current data rate - -Command-Rsp Mode - -*/ + * Caller Mode: Any + * + * Notes: To read the current data rate + * + * Command-Rsp Mode + * + */ struct getdatarate_parm { u32 rsvd; @@ -349,36 +351,36 @@ struct getdatarate_rsp { /* -Caller Mode: Any -AP: AP can use the info for the contents of beacon frame -Infra: STA can use the info when sitesurveying -Ad-HoC(M): Like AP -Ad-HoC(C): Like STA - - -Notes: To set the phy capability of the NIC - -Command Mode - -*/ + * Caller Mode: Any + * AP: AP can use the info for the contents of beacon frame + * Infra: STA can use the info when sitesurveying + * Ad-HoC(M): Like AP + * Ad-HoC(C): Like STA + * + * + * Notes: To set the phy capability of the NIC + * + * Command Mode + * + */ /* -Caller Mode: Any - -Notes: To set the channel/modem/band -This command will be used when channel/modem/band is changed. - -Command Mode - -*/ + * Caller Mode: Any + * + * Notes: To set the channel/modem/band + * This command will be used when channel/modem/band is changed. + * + * Command Mode + * + */ /* -Caller Mode: Any - -Notes: To get the current setting of channel/modem/band - -Command-Rsp Mode - -*/ + * Caller Mode: Any + * + * Notes: To get the current setting of channel/modem/band + * + * Command-Rsp Mode + * + */ struct getphy_rsp { u8 rfchannel; u8 modem; @@ -428,58 +430,58 @@ struct getrfintfs_parm { }; /* - Notes: This command is used for H2C/C2H loopback testing - - mac[0] == 0 - ==> CMD mode, return H2C_SUCCESS. - The following condition must be ture under CMD mode - mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; - s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; - s2 == (b1 << 8 | b0); - - mac[0] == 1 - ==> CMD_RSP mode, return H2C_SUCCESS_RSP - - The rsp layout shall be: - rsp: parm: - mac[0] = mac[5]; - mac[1] = mac[4]; - mac[2] = mac[3]; - mac[3] = mac[2]; - mac[4] = mac[1]; - mac[5] = mac[0]; - s0 = s1; - s1 = swap16(s0); - w0 = swap32(w1); - b0 = b1 - s2 = s0 + s1 - b1 = b0 - w1 = w0 - - mac[0] == 2 - ==> CMD_EVENT mode, return H2C_SUCCESS - The event layout shall be: - event: parm: - mac[0] = mac[5]; - mac[1] = mac[4]; - mac[2] = event's sequence number, starting from 1 to parm's marc[3] - mac[3] = mac[2]; - mac[4] = mac[1]; - mac[5] = mac[0]; - s0 = swap16(s0) - event.mac[2]; - s1 = s1 + event.mac[2]; - w0 = swap32(w0); - b0 = b1 - s2 = s0 + event.mac[2] - b1 = b0 - w1 = swap32(w1) - event.mac[2]; - - parm->mac[3] is the total event counts that host requested. - - - event will be the same with the cmd's param. - -*/ + * Notes: This command is used for H2C/C2H loopback testing + * + * mac[0] == 0 + * ==> CMD mode, return H2C_SUCCESS. + * The following condition must be ture under CMD mode + * mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0; + * s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7; + * s2 == (b1 << 8 | b0); + * + * mac[0] == 1 + * ==> CMD_RSP mode, return H2C_SUCCESS_RSP + * + * The rsp layout shall be: + * rsp: parm: + * mac[0] = mac[5]; + * mac[1] = mac[4]; + * mac[2] = mac[3]; + * mac[3] = mac[2]; + * mac[4] = mac[1]; + * mac[5] = mac[0]; + * s0 = s1; + * s1 = swap16(s0); + * w0 = swap32(w1); + * b0 = b1 + * s2 = s0 + s1 + * b1 = b0 + * w1 = w0 + * + * mac[0] == 2 + * ==> CMD_EVENT mode, return H2C_SUCCESS + * The event layout shall be: + * event: parm: + * mac[0] = mac[5]; + * mac[1] = mac[4]; + * mac[2] = event's sequence number, starting from 1 to parm's marc[3] + * mac[3] = mac[2]; + * mac[4] = mac[1]; + * mac[5] = mac[0]; + * s0 = swap16(s0) - event.mac[2]; + * s1 = s1 + event.mac[2]; + * w0 = swap32(w0); + * b0 = b1 + * s2 = s0 + event.mac[2] + * b1 = b0 + * w1 = swap32(w1) - event.mac[2]; + * + * parm->mac[3] is the total event counts that host requested. + * + * + * event will be the same with the cmd's param. + * + */ /* CMD param Formart for DRV INTERNAL CMD HDL*/ struct drvint_cmd_parm { @@ -570,7 +572,8 @@ struct setpwrmode_parm { u8 bcn_rx_en; u8 bcn_pass_cnt; /* fw report one beacon information to * driver when it receives bcn_pass_cnt - * beacons. */ + * beacons. + */ u8 bcn_to; /* beacon TO (ms). ¡§=0¡¨ no limit.*/ u16 bcn_itv; u8 app_itv; /* only for VOIP mode. */ |