1 files changed, 226 insertions, 0 deletions
diff --git a/drivers/staging/tidspbridge/dynload/params.h b/drivers/staging/tidspbridge/dynload/params.h
new file mode 100644
index 000000000000..d797fcd3b662
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/params.h
@@ -0,0 +1,226 @@
+/*
+ * params.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This file defines host and target properties for all machines
+ * supported by the dynamic loader.  To be tedious...
+ *
+ * host: the machine on which the dynamic loader runs
+ * target: the machine that the dynamic loader is loading
+ *
+ * Host and target may or may not be the same, depending upon the particular
+ * use.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/******************************************************************************
+ *
+ *							Host Properties
+ *
+ **************************************************************************** */
+
+#define BITS_PER_BYTE 8		/* bits in the standard PC/SUN byte */
+#define LOG_BITS_PER_BYTE 3	/* log base 2 of same */
+#define BYTE_MASK ((1U<<BITS_PER_BYTE)-1)
+
+#if defined(__TMS320C55X__) || defined(_TMS320C5XX)
+#define BITS_PER_AU 16
+#define LOG_BITS_PER_AU 4
+ /* use this print string in error messages for uint32_t */
+#define FMT_UI32 "0x%lx"
+#define FMT8_UI32 "%08lx"	/* same but no 0x, fixed width field */
+#else
+/* bits in the smallest addressable data storage unit */
+#define BITS_PER_AU 8
+/* log base 2 of the same; useful for shift counts */
+#define LOG_BITS_PER_AU 3
+#define FMT_UI32 "0x%x"
+#define FMT8_UI32 "%08x"
+#endif
+
+/* generic fastest method for swapping bytes and shorts */
+#define SWAP32BY16(zz) (((zz) << 16) | ((zz) >> 16))
+#define SWAP16BY8(zz) (((zz) << 8) | ((zz) >> 8))
+
+/* !! don't be tempted to insert type definitions here; use <stdint.h> !! */
+
+/******************************************************************************
+ *
+ *							Target Properties
+ *
+ **************************************************************************** */
+
+/*-------------------------------------------------------------------------- */
+/* TMS320C6x Target Specific Parameters (byte-addressable) */
+/*-------------------------------------------------------------------------- */
+#if TMS32060
+#define MEMORG          0x0L	/* Size of configured memory */
+#define MEMSIZE         0x0L	/* (full address space) */
+
+#define CINIT_ALIGN     8	/* alignment of cinit record in TDATA AUs */
+#define CINIT_COUNT	4	/* width of count field in TDATA AUs */
+#define CINIT_ADDRESS	4	/* width of address field in TDATA AUs */
+#define CINIT_PAGE_BITS	0	/* Number of LSBs of address that
+				 * are page number */
+
+#define LENIENT_SIGNED_RELEXPS 0	/* DOES SIGNED ALLOW MAX UNSIGNED */
+
+#undef TARGET_ENDIANNESS	/* may be big or little endian */
+
+/* align a target address to a word boundary */
+#define TARGET_WORD_ALIGN(zz) (((zz) + 0x3) & -0x4)
+#endif
+
+/*--------------------------------------------------------------------------
+ *
+ *			DEFAULT SETTINGS and DERIVED PROPERTIES
+ *
+ * This section establishes defaults for values not specified above
+ *-------------------------------------------------------------------------- */
+#ifndef TARGET_AU_BITS
+#define TARGET_AU_BITS 8	/* width of the target addressable unit */
+#define LOG_TARGET_AU_BITS 3	/* log2 of same */
+#endif
+
+#ifndef CINIT_DEFAULT_PAGE
+#define CINIT_DEFAULT_PAGE 0	/* default .cinit page number */
+#endif
+
+#ifndef DATA_RUN2LOAD
+#define DATA_RUN2LOAD(zz) (zz)	/* translate data run address to load address */
+#endif
+
+#ifndef DBG_LIST_PAGE
+#define DBG_LIST_PAGE 0		/* page number for .dllview section */
+#endif
+
+#ifndef TARGET_WORD_ALIGN
+/* align a target address to a word boundary */
+#define TARGET_WORD_ALIGN(zz) (zz)
+#endif
+
+#ifndef TDATA_TO_TADDR
+#define TDATA_TO_TADDR(zz) (zz)	/* target data address to target AU address */
+#define TADDR_TO_TDATA(zz) (zz)	/* target AU address to target data address */
+#define TDATA_AU_BITS	TARGET_AU_BITS	/* bits per data AU */
+#define LOG_TDATA_AU_BITS	LOG_TARGET_AU_BITS
+#endif
+
+/*
+ *
+ * Useful properties and conversions derived from the above
+ *
+ */
+
+/*
+ * Conversions between host and target addresses
+ */
+#if LOG_BITS_PER_AU == LOG_TARGET_AU_BITS
+/* translate target addressable unit to host address */
+#define TADDR_TO_HOST(x) (x)
+/* translate host address to target addressable unit */
+#define HOST_TO_TADDR(x) (x)
+#elif LOG_BITS_PER_AU > LOG_TARGET_AU_BITS
+#define TADDR_TO_HOST(x) ((x) >> (LOG_BITS_PER_AU-LOG_TARGET_AU_BITS))
+#define HOST_TO_TADDR(x) ((x) << (LOG_BITS_PER_AU-LOG_TARGET_AU_BITS))
+#else
+#define TADDR_TO_HOST(x) ((x) << (LOG_TARGET_AU_BITS-LOG_BITS_PER_AU))
+#define HOST_TO_TADDR(x) ((x) >> (LOG_TARGET_AU_BITS-LOG_BITS_PER_AU))
+#endif
+
+#if LOG_BITS_PER_AU == LOG_TDATA_AU_BITS
+/* translate target addressable unit to host address */
+#define TDATA_TO_HOST(x) (x)
+/* translate host address to target addressable unit */
+#define HOST_TO_TDATA(x) (x)
+/* translate host address to target addressable unit, round up */
+#define HOST_TO_TDATA_ROUND(x) (x)
+/* byte offset to host offset, rounded up for TDATA size */
+#define BYTE_TO_HOST_TDATA_ROUND(x) BYTE_TO_HOST_ROUND(x)
+#elif LOG_BITS_PER_AU > LOG_TDATA_AU_BITS
+#define TDATA_TO_HOST(x) ((x) >> (LOG_BITS_PER_AU-LOG_TDATA_AU_BITS))
+#define HOST_TO_TDATA(x) ((x) << (LOG_BITS_PER_AU-LOG_TDATA_AU_BITS))
+#define HOST_TO_TDATA_ROUND(x) ((x) << (LOG_BITS_PER_AU-LOG_TDATA_AU_BITS))
+#define BYTE_TO_HOST_TDATA_ROUND(x) BYTE_TO_HOST_ROUND(x)
+#else
+#define TDATA_TO_HOST(x) ((x) << (LOG_TDATA_AU_BITS-LOG_BITS_PER_AU))
+#define HOST_TO_TDATA(x) ((x) >> (LOG_TDATA_AU_BITS-LOG_BITS_PER_AU))
+#define HOST_TO_TDATA_ROUND(x) (((x) +\
+				(1<<(LOG_TDATA_AU_BITS-LOG_BITS_PER_AU))-1) >>\
+				(LOG_TDATA_AU_BITS-LOG_BITS_PER_AU))
+#define BYTE_TO_HOST_TDATA_ROUND(x) (BYTE_TO_HOST((x) +\
+	(1<<(LOG_TDATA_AU_BITS-LOG_BITS_PER_BYTE))-1) &\
+	-(TDATA_AU_BITS/BITS_PER_AU))
+#endif
+
+/*
+ * Input in DOFF format is always expresed in bytes, regardless of loading host
+ * so we wind up converting from bytes to target and host units even when the
+ * host is not a byte machine.
+ */
+#if LOG_BITS_PER_AU == LOG_BITS_PER_BYTE
+#define BYTE_TO_HOST(x) (x)
+#define BYTE_TO_HOST_ROUND(x) (x)
+#define HOST_TO_BYTE(x) (x)
+#elif LOG_BITS_PER_AU >= LOG_BITS_PER_BYTE
+#define BYTE_TO_HOST(x) ((x) >> (LOG_BITS_PER_AU - LOG_BITS_PER_BYTE))
+#define BYTE_TO_HOST_ROUND(x) ((x + (BITS_PER_AU/BITS_PER_BYTE-1)) >>\
+			      (LOG_BITS_PER_AU - LOG_BITS_PER_BYTE))
+#define HOST_TO_BYTE(x) ((x) << (LOG_BITS_PER_AU - LOG_BITS_PER_BYTE))
+#else
+/* lets not try to deal with sub-8-bit byte machines */
+#endif
+
+#if LOG_TARGET_AU_BITS == LOG_BITS_PER_BYTE
+/* translate target addressable unit to byte address */
+#define TADDR_TO_BYTE(x) (x)
+/* translate byte address to target addressable unit */
+#define BYTE_TO_TADDR(x) (x)
+#elif LOG_TARGET_AU_BITS > LOG_BITS_PER_BYTE
+#define TADDR_TO_BYTE(x) ((x) << (LOG_TARGET_AU_BITS-LOG_BITS_PER_BYTE))
+#define BYTE_TO_TADDR(x) ((x) >> (LOG_TARGET_AU_BITS-LOG_BITS_PER_BYTE))
+#else
+/* lets not try to deal with sub-8-bit byte machines */
+#endif
+
+#ifdef _BIG_ENDIAN
+#define HOST_ENDIANNESS 1
+#else
+#define HOST_ENDIANNESS 0
+#endif
+
+#ifdef TARGET_ENDIANNESS
+#define TARGET_ENDIANNESS_DIFFERS(rtend) (HOST_ENDIANNESS^TARGET_ENDIANNESS)
+#elif HOST_ENDIANNESS
+#define TARGET_ENDIANNESS_DIFFERS(rtend) (!(rtend))
+#else
+#define TARGET_ENDIANNESS_DIFFERS(rtend) (rtend)
+#endif
+
+/* the unit in which we process target image data */
+#if TARGET_AU_BITS <= 8
+typedef u8 tgt_au_t;
+#elif TARGET_AU_BITS <= 16
+typedef u16 tgt_au_t;
+#else
+typedef u32 tgt_au_t;
+#endif
+
+/* size of that unit */
+#if TARGET_AU_BITS < BITS_PER_AU
+#define TGTAU_BITS BITS_PER_AU
+#define LOG_TGTAU_BITS LOG_BITS_PER_AU
+#else
+#define TGTAU_BITS TARGET_AU_BITS
+#define LOG_TGTAU_BITS LOG_TARGET_AU_BITS
+#endif