diff options
Diffstat (limited to 'drivers/tty/serial')
23 files changed, 223 insertions, 88 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index d29b512a7d9f..c698ebab6d3b 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -953,6 +953,21 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * return NULL; } +static void serial_8250_overrun_backoff_work(struct work_struct *work) +{ + struct uart_8250_port *up = + container_of(to_delayed_work(work), struct uart_8250_port, + overrun_backoff); + struct uart_port *port = &up->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + up->ier |= UART_IER_RLSI | UART_IER_RDI; + up->port.read_status_mask |= UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&port->lock, flags); +} + /** * serial8250_register_8250_port - register a serial port * @up: serial port template @@ -1062,7 +1077,18 @@ int serial8250_register_8250_port(struct uart_8250_port *up) ret = 0; } + + /* Initialise interrupt backoff work if required */ + if (up->overrun_backoff_time_ms > 0) { + uart->overrun_backoff_time_ms = + up->overrun_backoff_time_ms; + INIT_DELAYED_WORK(&uart->overrun_backoff, + serial_8250_overrun_backoff_work); + } else { + uart->overrun_backoff_time_ms = 0; + } } + mutex_unlock(&serial_mutex); return ret; diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index 910bfee5a88b..cc138c24ae88 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -48,8 +48,29 @@ int fsl8250_handle_irq(struct uart_port *port) lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR); - if (lsr & (UART_LSR_DR | UART_LSR_BI)) + /* Process incoming characters first */ + if ((lsr & (UART_LSR_DR | UART_LSR_BI)) && + (up->ier & (UART_IER_RLSI | UART_IER_RDI))) { lsr = serial8250_rx_chars(up, lsr); + } + + /* Stop processing interrupts on input overrun */ + if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) { + unsigned long delay; + + up->ier = port->serial_in(port, UART_IER); + if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) { + port->ops->stop_rx(port); + } else { + /* Keep restarting the timer until + * the input overrun subsides. + */ + cancel_delayed_work(&up->overrun_backoff); + } + + delay = msecs_to_jiffies(up->overrun_backoff_time_ms); + schedule_delayed_work(&up->overrun_backoff, delay); + } serial8250_modem_status(up); diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index ec510e342e06..c51044ba503c 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -232,6 +232,11 @@ static int of_platform_serial_probe(struct platform_device *ofdev) if (of_property_read_bool(ofdev->dev.of_node, "auto-flow-control")) port8250.capabilities |= UART_CAP_AFE; + if (of_property_read_u32(ofdev->dev.of_node, + "overrun-throttle-ms", + &port8250.overrun_backoff_time_ms) != 0) + port8250.overrun_backoff_time_ms = 0; + ret = serial8250_register_8250_port(&port8250); if (ret < 0) goto err_dispose; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index ecf3d631bc09..a73d2bc4b685 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1873,13 +1873,13 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial_port_in(port, UART_LSR); - if (status & (UART_LSR_DR | UART_LSR_BI) && - iir & UART_IIR_RDI) { + if (status & (UART_LSR_DR | UART_LSR_BI)) { if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); } serial8250_modem_status(up); - if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE)) + if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE) && + (up->ier & UART_IER_THRI)) serial8250_tx_chars(up); spin_unlock_irqrestore(&port->lock, flags); diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 4a4a9f33715c..637f72fb6427 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -829,10 +829,8 @@ __acquires(&uap->port.lock) if (!uap->using_tx_dma) return; - /* Avoid deadlock with the DMA engine callback */ - spin_unlock(&uap->port.lock); - dmaengine_terminate_all(uap->dmatx.chan); - spin_lock(&uap->port.lock); + dmaengine_terminate_async(uap->dmatx.chan); + if (uap->dmatx.queued) { dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, DMA_TO_DEVICE); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index f747f1a1780c..9ee41ba0e55b 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1276,7 +1276,6 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending) atmel_port->hd_start_rx = false; atmel_start_rx(port); - return; } atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 8b2b694334ec..8f5a5a16cb3b 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -421,7 +421,16 @@ static int cpm_uart_startup(struct uart_port *port) clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); } cpm_uart_initbd(pinfo); - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + if (IS_SMC(pinfo)) { + out_be32(&pinfo->smcup->smc_rstate, 0); + out_be32(&pinfo->smcup->smc_tstate, 0); + out_be16(&pinfo->smcup->smc_rbptr, + in_be16(&pinfo->smcup->smc_rbase)); + out_be16(&pinfo->smcup->smc_tbptr, + in_be16(&pinfo->smcup->smc_tbase)); + } else { + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + } } /* Install interrupt handler. */ retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); @@ -875,16 +884,14 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); /* - * In case SMC1 is being relocated... + * In case SMC is being relocated... */ -#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); out_be32(&up->smc_rstate, 0); out_be32(&up->smc_tstate, 0); out_be16(&up->smc_brkcr, 1); /* number of break chars */ out_be16(&up->smc_brkec, 0); -#endif /* Set up the uart parameters in the * parameter ram. @@ -898,8 +905,6 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) out_be16(&up->smc_brkec, 0); out_be16(&up->smc_brkcr, 1); - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - /* Set UART mode, 8 bit, no parity, one stop. * Enable receive and transmit. */ diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index 02ad6953b167..50ec5f1ac77f 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -545,7 +545,11 @@ static int __init digicolor_uart_init(void) if (ret) return ret; - return platform_driver_register(&digicolor_uart_platform); + ret = platform_driver_register(&digicolor_uart_platform); + if (ret) + uart_unregister_driver(&digicolor_uart); + + return ret; } module_init(digicolor_uart_init); diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index f190a84a0246..d54ebe6b1d50 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1245,6 +1245,9 @@ static int ifx_spi_spi_remove(struct spi_device *spi) struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); /* stop activity */ tasklet_kill(&ifx_dev->io_work_tasklet); + + pm_runtime_disable(&spi->dev); + /* free irq */ free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev); free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index a2aca5503315..d018968e3b2f 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2016,7 +2016,7 @@ imx_console_setup(struct console *co, char *options) retval = clk_prepare(sport->clk_per); if (retval) - clk_disable_unprepare(sport->clk_ipg); + clk_unprepare(sport->clk_ipg); error_console: return retval; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 1a98b6631e90..cec995ec11ea 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -494,37 +494,48 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg) static int max310x_set_baud(struct uart_port *port, int baud) { - unsigned int mode = 0, clk = port->uartclk, div = clk / baud; + unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0; - /* Check for minimal value for divider */ - if (div < 16) - div = 16; - - if (clk % baud && (div / 16) < 0x8000) { + /* + * Calculate the integer divisor first. Select a proper mode + * in case if the requested baud is too high for the pre-defined + * clocks frequency. + */ + div = port->uartclk / baud; + if (div < 8) { + /* Mode x4 */ + c = 4; + mode = MAX310X_BRGCFG_4XMODE_BIT; + } else if (div < 16) { /* Mode x2 */ + c = 8; mode = MAX310X_BRGCFG_2XMODE_BIT; - clk = port->uartclk * 2; - div = clk / baud; - - if (clk % baud && (div / 16) < 0x8000) { - /* Mode x4 */ - mode = MAX310X_BRGCFG_4XMODE_BIT; - clk = port->uartclk * 4; - div = clk / baud; - } + } else { + c = 16; } - max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8); - max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16); - max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode); + /* Calculate the divisor in accordance with the fraction coefficient */ + div /= c; + F = c*baud; - return DIV_ROUND_CLOSEST(clk, div); + /* Calculate the baud rate fraction */ + if (div > 0) + frac = (16*(port->uartclk % F)) / F; + else + div = 1; + + max310x_port_write(port, MAX310X_BRGDIVMSB_REG, div >> 8); + max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div); + max310x_port_write(port, MAX310X_BRGCFG_REG, frac | mode); + + /* Return the actual baud rate we just programmed */ + return (16*port->uartclk) / (c*(16*div + frac)); } static int max310x_update_best_err(unsigned long f, long *besterr) { /* Use baudrate 115200 for calculate error */ - long err = f % (115200 * 16); + long err = f % (460800 * 16); if ((*besterr < 0) || (*besterr > err)) { *besterr = err; @@ -758,12 +769,9 @@ static void max310x_start_tx(struct uart_port *port) static unsigned int max310x_tx_empty(struct uart_port *port) { - unsigned int lvl, sts; - - lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); - sts = max310x_port_read(port, MAX310X_IRQSTS_REG); + u8 lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); - return ((sts & MAX310X_IRQ_TXEMPTY_BIT) && !lvl) ? TIOCSER_TEMT : 0; + return lvl ? 0 : TIOCSER_TEMT; } static unsigned int max310x_get_mctrl(struct uart_port *port) diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 716aa76abdf9..e937fb189034 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -391,10 +391,14 @@ no_rx: static inline void msm_wait_for_xmitr(struct uart_port *port) { + unsigned int timeout = 500000; + while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) { if (msm_read(port, UART_ISR) & UART_ISR_TX_READY) break; udelay(1); + if (!timeout--) + break; } msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR); } @@ -984,6 +988,7 @@ static unsigned int msm_get_mctrl(struct uart_port *port) static void msm_reset(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int mr; /* reset everything */ msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); @@ -991,7 +996,10 @@ static void msm_reset(struct uart_port *port) msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); - msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + mr = msm_read(port, UART_MR1); + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); /* Disable DM modes */ if (msm_port->is_uartdm) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 673c8fd7e34f..e83750831f15 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1638,8 +1638,9 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s) /* * If something went wrong, rollback. + * Be careful: i may be unsigned. */ - while (err && (--i >= 0)) + while (err && (i-- > 0)) if (irq[i] >= 0) free_irq(irq[i], s); diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c index b9c859365334..d774f6013d7b 100644 --- a/drivers/tty/serial/owl-uart.c +++ b/drivers/tty/serial/owl-uart.c @@ -754,7 +754,7 @@ static int __init owl_uart_init(void) return ret; } -static void __init owl_uart_exit(void) +static void __exit owl_uart_exit(void) { platform_driver_unregister(&owl_uart_platform_driver); uart_unregister_driver(&owl_uart_driver); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index f4b8e4e17a86..808373d4e37a 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1922,7 +1922,11 @@ static int s3c24xx_serial_resume(struct device *dev) if (port) { clk_prepare_enable(ourport->clk); + if (!IS_ERR(ourport->baudclk)) + clk_prepare_enable(ourport->baudclk); s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); + if (!IS_ERR(ourport->baudclk)) + clk_disable_unprepare(ourport->baudclk); clk_disable_unprepare(ourport->clk); uart_resume_port(&s3c24xx_uart_drv, port); @@ -1945,7 +1949,11 @@ static int s3c24xx_serial_resume_noirq(struct device *dev) if (rx_enabled(port)) uintm &= ~S3C64XX_UINTM_RXD_MSK; clk_prepare_enable(ourport->clk); + if (!IS_ERR(ourport->baudclk)) + clk_prepare_enable(ourport->baudclk); wr_regl(port, S3C64XX_UINTM, uintm); + if (!IS_ERR(ourport->baudclk)) + clk_disable_unprepare(ourport->baudclk); clk_disable_unprepare(ourport->clk); } } diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index e48523da47ac..c1655aba131f 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -333,6 +333,7 @@ struct sc16is7xx_port { struct kthread_worker kworker; struct task_struct *kworker_task; struct kthread_work irq_work; + struct mutex efr_lock; struct sc16is7xx_one p[0]; }; @@ -504,6 +505,21 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) div /= 4; } + /* In an amazing feat of design, the Enhanced Features Register shares + * the address of the Interrupt Identification Register, and is + * switched in by writing a magic value (0xbf) to the Line Control + * Register. Any interrupt firing during this time will see the EFR + * where it expects the IIR to be, leading to "Unexpected interrupt" + * messages. + * + * Prevent this possibility by claiming a mutex while accessing the + * EFR, and claiming the same mutex from within the interrupt handler. + * This is similar to disabling the interrupt, but that doesn't work + * because the bulk of the interrupt processing is run as a workqueue + * job in thread context. + */ + mutex_lock(&s->efr_lock); + lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); /* Open the LCR divisors for configuration */ @@ -519,6 +535,8 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) /* Put LCR back to the normal mode */ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + mutex_unlock(&s->efr_lock); + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, SC16IS7XX_MCR_CLKSEL_BIT, prescaler); @@ -701,6 +719,8 @@ static void sc16is7xx_ist(struct kthread_work *ws) { struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work); + mutex_lock(&s->efr_lock); + while (1) { bool keep_polling = false; int i; @@ -710,6 +730,8 @@ static void sc16is7xx_ist(struct kthread_work *ws) if (!keep_polling) break; } + + mutex_unlock(&s->efr_lock); } static irqreturn_t sc16is7xx_irq(int irq, void *dev_id) @@ -904,6 +926,9 @@ static void sc16is7xx_set_termios(struct uart_port *port, if (!(termios->c_cflag & CREAD)) port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK; + /* As above, claim the mutex while accessing the EFR. */ + mutex_lock(&s->efr_lock); + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_CONF_MODE_B); @@ -925,6 +950,8 @@ static void sc16is7xx_set_termios(struct uart_port *port, /* Update LCR register */ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + mutex_unlock(&s->efr_lock); + /* Get baud rate generator configuration */ baud = uart_get_baud_rate(port, termios, old, port->uartclk / 16 / 4 / 0xffff, @@ -1187,6 +1214,7 @@ static int sc16is7xx_probe(struct device *dev, s->regmap = regmap; s->devtype = devtype; dev_set_drvdata(dev, s); + mutex_init(&s->efr_lock); kthread_init_worker(&s->kworker); kthread_init_work(&s->irq_work, sc16is7xx_ist); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index c39246b916af..38bb8f85e88d 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1125,7 +1125,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state) if (!uport) goto out; - if (uport->type != PORT_UNKNOWN) + if (uport->type != PORT_UNKNOWN && uport->ops->break_ctl) uport->ops->break_ctl(uport, break_state); ret = 0; out: @@ -1742,6 +1742,7 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty) { struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport; + int ret; uport = uart_port_check(state); if (!uport || uport->flags & UPF_DEAD) @@ -1752,7 +1753,11 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty) /* * Start up the serial port. */ - return uart_startup(tty, state, 0); + ret = uart_startup(tty, state, 0); + if (ret > 0) + tty_port_set_active(port, 1); + + return ret; } static const char *uart_type(struct uart_port *port) diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index d2da6aa7f27d..388f71046849 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -21,6 +21,7 @@ #include <linux/termios.h> #include <linux/serial_core.h> #include <linux/module.h> +#include <linux/property.h> #include "serial_mctrl_gpio.h" @@ -68,6 +69,9 @@ EXPORT_SYMBOL_GPL(mctrl_gpio_set); struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, enum mctrl_gpio_idx gidx) { + if (gpios == NULL) + return NULL; + return gpios->gpio[gidx]; } EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod); @@ -124,6 +128,19 @@ struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx) for (i = 0; i < UART_GPIO_MAX; i++) { enum gpiod_flags flags; + char *gpio_str; + bool present; + + /* Check if GPIO property exists and continue if not */ + gpio_str = kasprintf(GFP_KERNEL, "%s-gpios", + mctrl_gpios_desc[i].name); + if (!gpio_str) + continue; + + present = device_property_present(dev, gpio_str); + kfree(gpio_str); + if (!present) + continue; if (mctrl_gpios_desc[i].dir_out) flags = GPIOD_OUT_LOW; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 66c8bbea06c4..333de7d3fe86 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1319,6 +1319,7 @@ static void work_fn_tx(struct work_struct *work) struct uart_port *port = &s->port; struct circ_buf *xmit = &port->state->xmit; dma_addr_t buf; + int head, tail; /* * DMA is idle now. @@ -1328,16 +1329,23 @@ static void work_fn_tx(struct work_struct *work) * consistent xmit buffer state. */ spin_lock_irq(&port->lock); - buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1)); + head = xmit->head; + tail = xmit->tail; + buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1)); s->tx_dma_len = min_t(unsigned int, - CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), - CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); - spin_unlock_irq(&port->lock); + CIRC_CNT(head, tail, UART_XMIT_SIZE), + CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE)); + if (!s->tx_dma_len) { + /* Transmit buffer has been flushed */ + spin_unlock_irq(&port->lock); + return; + } desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { + spin_unlock_irq(&port->lock); dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n"); /* switch to PIO */ sci_tx_dma_release(s, true); @@ -1347,20 +1355,20 @@ static void work_fn_tx(struct work_struct *work) dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len, DMA_TO_DEVICE); - spin_lock_irq(&port->lock); desc->callback = sci_dma_tx_complete; desc->callback_param = s; - spin_unlock_irq(&port->lock); s->cookie_tx = dmaengine_submit(desc); if (dma_submit_error(s->cookie_tx)) { + spin_unlock_irq(&port->lock); dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); /* switch to PIO */ sci_tx_dma_release(s, true); return; } + spin_unlock_irq(&port->lock); dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", - __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx); + __func__, xmit->buf, tail, head, s->cookie_tx); dma_async_issue_pending(chan); } @@ -1571,11 +1579,18 @@ static void sci_free_dma(struct uart_port *port) static void sci_flush_buffer(struct uart_port *port) { + struct sci_port *s = to_sci_port(port); + /* * In uart_flush_buffer(), the xmit circular buffer has just been - * cleared, so we have to reset tx_dma_len accordingly. + * cleared, so we have to reset tx_dma_len accordingly, and stop any + * pending transfers */ - to_sci_port(port)->tx_dma_len = 0; + s->tx_dma_len = 0; + if (s->chan_tx) { + dmaengine_terminate_async(s->chan_tx); + s->cookie_tx = -EINVAL; + } } #else /* !CONFIG_SERIAL_SH_SCI_DMA */ static inline void sci_request_dma(struct uart_port *port) diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index e902494ebbd5..943619ebee38 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -240,7 +240,7 @@ static inline void sprd_rx(struct uart_port *port) if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE | SPRD_LSR_FE | SPRD_LSR_OE)) - if (handle_lsr_errors(port, &lsr, &flag)) + if (handle_lsr_errors(port, &flag, &lsr)) continue; if (uart_handle_sysrq_char(port, ch)) continue; diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index 46e46894e918..84c4d83fcfca 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -396,7 +396,7 @@ static const struct uart_ops sunhv_pops = { static struct uart_driver sunhv_reg = { .owner = THIS_MODULE, .driver_name = "sunhv", - .dev_name = "ttyS", + .dev_name = "ttyHV", .major = TTY_MAJOR, }; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index c9b8d702dadc..2e76eb4c604c 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -746,7 +746,8 @@ err_uart: static void __exit ulite_exit(void) { platform_driver_unregister(&ulite_platform_driver); - uart_unregister_driver(&ulite_uart_driver); + if (ulite_uart_driver.state) + uart_unregister_driver(&ulite_uart_driver); } module_init(ulite_init); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index b0da63737aa1..0dbfd02e3b19 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1342,24 +1342,11 @@ static struct uart_driver cdns_uart_uart_driver = { static int cdns_uart_suspend(struct device *device) { struct uart_port *port = dev_get_drvdata(device); - struct tty_struct *tty; - struct device *tty_dev; - int may_wake = 0; - - /* Get the tty which could be NULL so don't assume it's valid */ - tty = tty_port_tty_get(&port->state->port); - if (tty) { - tty_dev = tty->dev; - may_wake = device_may_wakeup(tty_dev); - tty_kref_put(tty); - } + int may_wake; - /* - * Call the API provided in serial_core.c file which handles - * the suspend. - */ - uart_suspend_port(&cdns_uart_uart_driver, port); - if (!(console_suspend_enabled && !may_wake)) { + may_wake = device_may_wakeup(device); + + if (console_suspend_enabled && may_wake) { unsigned long flags = 0; spin_lock_irqsave(&port->lock, flags); @@ -1374,7 +1361,11 @@ static int cdns_uart_suspend(struct device *device) spin_unlock_irqrestore(&port->lock, flags); } - return 0; + /* + * Call the API provided in serial_core.c file which handles + * the suspend. + */ + return uart_suspend_port(&cdns_uart_uart_driver, port); } /** @@ -1388,17 +1379,9 @@ static int cdns_uart_resume(struct device *device) struct uart_port *port = dev_get_drvdata(device); unsigned long flags = 0; u32 ctrl_reg; - struct tty_struct *tty; - struct device *tty_dev; - int may_wake = 0; - - /* Get the tty which could be NULL so don't assume it's valid */ - tty = tty_port_tty_get(&port->state->port); - if (tty) { - tty_dev = tty->dev; - may_wake = device_may_wakeup(tty_dev); - tty_kref_put(tty); - } + int may_wake; + + may_wake = device_may_wakeup(device); if (console_suspend_enabled && !may_wake) { struct cdns_uart *cdns_uart = port->private_data; |