diff options
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/8250/8250_mtk.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 5 | ||||
-rw-r--r-- | drivers/tty/serial/Kconfig | 1 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 20 | ||||
-rw-r--r-- | drivers/tty/serial/rp2.c | 52 | ||||
-rw-r--r-- | drivers/tty/serial/serial_txx9.c | 3 |
6 files changed, 25 insertions, 58 deletions
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 470ccf729d59..93334e07dd5f 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -58,7 +58,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, */ baud = tty_termios_baud_rate(termios); - serial8250_do_set_termios(port, termios, old); + serial8250_do_set_termios(port, termios, NULL); tty_termios_encode_baud_rate(termios, baud, baud); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 0377b35d62b8..4bcb8dfa4874 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -155,11 +155,6 @@ static void omap_8250_mdr1_errataset(struct uart_8250_port *up, struct omap8250_priv *priv) { u8 timeout = 255; - u8 old_mdr1; - - old_mdr1 = serial_in(up, UART_OMAP_MDR1); - if (old_mdr1 == priv->mdr1) - return; serial_out(up, UART_OMAP_MDR1, priv->mdr1); udelay(2); diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index f38beb28e7ae..5c3c86d4fe71 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -9,6 +9,7 @@ menu "Serial drivers" config SERIAL_EARLYCON bool + depends on SERIAL_CORE help Support for early consoles with the earlycon parameter. This enables the console before standard serial driver is probed. The console is diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index ca69e2ca6b56..6a9fa718bfd8 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1628,16 +1628,6 @@ imx_console_write(struct console *co, const char *s, unsigned int count) unsigned int ucr1; unsigned long flags = 0; int locked = 1; - int retval; - - retval = clk_enable(sport->clk_per); - if (retval) - return; - retval = clk_enable(sport->clk_ipg); - if (retval) { - clk_disable(sport->clk_per); - return; - } if (sport->port.sysrq) locked = 0; @@ -1673,9 +1663,6 @@ imx_console_write(struct console *co, const char *s, unsigned int count) if (locked) spin_unlock_irqrestore(&sport->port.lock, flags); - - clk_disable(sport->clk_ipg); - clk_disable(sport->clk_per); } /* @@ -1776,15 +1763,14 @@ imx_console_setup(struct console *co, char *options) retval = uart_set_options(&sport->port, co, baud, parity, bits, flow); - clk_disable(sport->clk_ipg); if (retval) { - clk_unprepare(sport->clk_ipg); + clk_disable_unprepare(sport->clk_ipg); goto error_console; } - retval = clk_prepare(sport->clk_per); + retval = clk_prepare_enable(sport->clk_per); if (retval) - clk_unprepare(sport->clk_ipg); + clk_disable_unprepare(sport->clk_ipg); error_console: return retval; diff --git a/drivers/tty/serial/rp2.c b/drivers/tty/serial/rp2.c index 056f91b3a4ca..b7d1b1645c84 100644 --- a/drivers/tty/serial/rp2.c +++ b/drivers/tty/serial/rp2.c @@ -198,7 +198,6 @@ struct rp2_card { void __iomem *bar0; void __iomem *bar1; spinlock_t card_lock; - struct completion fw_loaded; }; #define RP_ID(prod) PCI_VDEVICE(RP, (prod)) @@ -667,17 +666,10 @@ static void rp2_remove_ports(struct rp2_card *card) card->initialized_ports = 0; } -static void rp2_fw_cb(const struct firmware *fw, void *context) +static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw) { - struct rp2_card *card = context; resource_size_t phys_base; - int i, rc = -ENOENT; - - if (!fw) { - dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n", - RP2_FW_NAME); - goto no_fw; - } + int i, rc = 0; phys_base = pci_resource_start(card->pdev, 1); @@ -723,23 +715,13 @@ static void rp2_fw_cb(const struct firmware *fw, void *context) card->initialized_ports++; } - release_firmware(fw); -no_fw: - /* - * rp2_fw_cb() is called from a workqueue long after rp2_probe() - * has already returned success. So if something failed here, - * we'll just leave the now-dormant device in place until somebody - * unbinds it. - */ - if (rc) - dev_warn(&card->pdev->dev, "driver initialization failed\n"); - - complete(&card->fw_loaded); + return rc; } static int rp2_probe(struct pci_dev *pdev, const struct pci_device_id *id) { + const struct firmware *fw; struct rp2_card *card; struct rp2_uart_port *ports; void __iomem * const *bars; @@ -750,7 +732,6 @@ static int rp2_probe(struct pci_dev *pdev, return -ENOMEM; pci_set_drvdata(pdev, card); spin_lock_init(&card->card_lock); - init_completion(&card->fw_loaded); rc = pcim_enable_device(pdev); if (rc) @@ -783,21 +764,23 @@ static int rp2_probe(struct pci_dev *pdev, return -ENOMEM; card->ports = ports; - rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt, - IRQF_SHARED, DRV_NAME, card); - if (rc) + rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev); + if (rc < 0) { + dev_err(&pdev->dev, "cannot find '%s' firmware image\n", + RP2_FW_NAME); return rc; + } - /* - * Only catastrophic errors (e.g. ENOMEM) are reported here. - * If the FW image is missing, we'll find out in rp2_fw_cb() - * and print an error message. - */ - rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev, - GFP_KERNEL, card, rp2_fw_cb); + rc = rp2_load_firmware(card, fw); + + release_firmware(fw); + if (rc < 0) + return rc; + + rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt, + IRQF_SHARED, DRV_NAME, card); if (rc) return rc; - dev_dbg(&pdev->dev, "waiting for firmware blob...\n"); return 0; } @@ -806,7 +789,6 @@ static void rp2_remove(struct pci_dev *pdev) { struct rp2_card *card = pci_get_drvdata(pdev); - wait_for_completion(&card->fw_loaded); rp2_remove_ports(card); } diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index f80312eed4fd..ffb3fb1bda9e 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -1287,6 +1287,9 @@ static int __init serial_txx9_init(void) #ifdef ENABLE_SERIAL_TXX9_PCI ret = pci_register_driver(&serial_txx9_pci_driver); + if (ret) { + platform_driver_unregister(&serial_txx9_plat_driver); + } #endif if (ret == 0) goto out; |