diff options
Diffstat (limited to 'drivers/tty')
31 files changed, 1237 insertions, 325 deletions
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 37caba7c3aff..c8c5cdfc5e19 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -13,6 +13,7 @@ #include <linux/slab.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/mod_devicetable.h> #include <linux/goldfish.h> #include <linux/mm.h> #include <linux/dma-mapping.h> diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index b0e2c4847a5d..678406e0948b 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -625,7 +625,7 @@ int ptm_open_peer(struct file *master, struct tty_struct *tty, int flags) if (tty->driver != ptm_driver) return -EIO; - fd = get_unused_fd_flags(0); + fd = get_unused_fd_flags(flags); if (fd < 0) { retval = fd; goto err; diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index bdd17d2aaafd..b121d8f8f3d7 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -1881,7 +1881,7 @@ static __init int register_PCI(int i, struct pci_dev *dev) ByteIO_t UPCIRingInd = 0; if (!dev || !pci_match_id(rocket_pci_ids, dev) || - pci_enable_device(dev)) + pci_enable_device(dev) || i >= NUM_BOARDS) return 0; rcktpt_io_addr[i] = pci_resource_start(dev, 0); diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c index 9e59f4788589..9db93f500b4e 100644 --- a/drivers/tty/serdev/core.c +++ b/drivers/tty/serdev/core.c @@ -13,6 +13,8 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_runtime.h> #include <linux/serdev.h> #include <linux/slab.h> @@ -143,11 +145,28 @@ EXPORT_SYMBOL_GPL(serdev_device_remove); int serdev_device_open(struct serdev_device *serdev) { struct serdev_controller *ctrl = serdev->ctrl; + int ret; if (!ctrl || !ctrl->ops->open) return -EINVAL; - return ctrl->ops->open(ctrl); + ret = ctrl->ops->open(ctrl); + if (ret) + return ret; + + ret = pm_runtime_get_sync(&ctrl->dev); + if (ret < 0) { + pm_runtime_put_noidle(&ctrl->dev); + goto err_close; + } + + return 0; + +err_close: + if (ctrl->ops->close) + ctrl->ops->close(ctrl); + + return ret; } EXPORT_SYMBOL_GPL(serdev_device_open); @@ -158,6 +177,8 @@ void serdev_device_close(struct serdev_device *serdev) if (!ctrl || !ctrl->ops->close) return; + pm_runtime_put(&ctrl->dev); + ctrl->ops->close(ctrl); } EXPORT_SYMBOL_GPL(serdev_device_close); @@ -330,8 +351,17 @@ EXPORT_SYMBOL_GPL(serdev_device_set_tiocm); static int serdev_drv_probe(struct device *dev) { const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver); + int ret; + + ret = dev_pm_domain_attach(dev, true); + if (ret) + return ret; + + ret = sdrv->probe(to_serdev_device(dev)); + if (ret) + dev_pm_domain_detach(dev, true); - return sdrv->probe(to_serdev_device(dev)); + return ret; } static int serdev_drv_remove(struct device *dev) @@ -339,6 +369,9 @@ static int serdev_drv_remove(struct device *dev) const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver); if (sdrv->remove) sdrv->remove(to_serdev_device(dev)); + + dev_pm_domain_detach(dev, true); + return 0; } @@ -416,6 +449,9 @@ struct serdev_controller *serdev_controller_alloc(struct device *parent, dev_set_name(&ctrl->dev, "serial%d", id); + pm_runtime_no_callbacks(&ctrl->dev); + pm_suspend_ignore_children(&ctrl->dev, true); + dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id); return ctrl; @@ -547,20 +583,23 @@ int serdev_controller_add(struct serdev_controller *ctrl) if (ret) return ret; + pm_runtime_enable(&ctrl->dev); + ret_of = of_serdev_register_devices(ctrl); ret_acpi = acpi_serdev_register_devices(ctrl); if (ret_of && ret_acpi) { dev_dbg(&ctrl->dev, "no devices registered: of:%d acpi:%d\n", ret_of, ret_acpi); ret = -ENODEV; - goto out_dev_del; + goto err_rpm_disable; } dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n", ctrl->nr, &ctrl->dev); return 0; -out_dev_del: +err_rpm_disable: + pm_runtime_disable(&ctrl->dev); device_del(&ctrl->dev); return ret; }; @@ -591,6 +630,7 @@ void serdev_controller_remove(struct serdev_controller *ctrl) dummy = device_for_each_child(&ctrl->dev, NULL, serdev_remove_device); + pm_runtime_disable(&ctrl->dev); device_del(&ctrl->dev); } EXPORT_SYMBOL_GPL(serdev_controller_remove); diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 9342fc2ee7df..8fe3d0ed229e 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -323,7 +323,7 @@ static int univ8250_setup_irq(struct uart_8250_port *up) * the port is opened so this value needs to be preserved. */ if (up->bugs & UART_BUG_THRE) { - pr_debug("ttyS%d - using backup timer\n", serial_index(port)); + pr_debug("%s - using backup timer\n", port->name); up->timer.function = serial8250_backup_timeout; mod_timer(&up->timer, jiffies + @@ -1023,6 +1023,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->port.get_mctrl = up->port.get_mctrl; if (up->port.set_mctrl) uart->port.set_mctrl = up->port.set_mctrl; + if (up->port.get_divisor) + uart->port.get_divisor = up->port.get_divisor; + if (up->port.set_divisor) + uart->port.set_divisor = up->port.set_divisor; if (up->port.startup) uart->port.startup = up->port.startup; if (up->port.shutdown) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index aff04f1de3a5..fa8dcb470640 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -31,6 +31,7 @@ /* Offsets for the DesignWare specific registers */ #define DW_UART_USR 0x1f /* UART Status Register */ +#define DW_UART_DLF 0xc0 /* Divisor Latch Fraction Register */ #define DW_UART_CPR 0xf4 /* Component Parameter Register */ #define DW_UART_UCV 0xf8 /* UART Component Version */ @@ -55,6 +56,7 @@ struct dw8250_data { u8 usr_reg; + u8 dlf_size; int line; int msr_mask_on; int msr_mask_off; @@ -67,6 +69,21 @@ struct dw8250_data { unsigned int uart_16550_compatible:1; }; +static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) +{ + if (p->iotype == UPIO_MEM32BE) + return ioread32be(p->membase + offset); + return readl(p->membase + offset); +} + +static inline void dw8250_writel_ext(struct uart_port *p, int offset, u32 reg) +{ + if (p->iotype == UPIO_MEM32BE) + iowrite32be(reg, p->membase + offset); + else + writel(reg, p->membase + offset); +} + static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value) { struct dw8250_data *d = p->private_data; @@ -293,7 +310,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, long rate; int ret; - if (IS_ERR(d->clk) || !old) + if (IS_ERR(d->clk)) goto out; clk_disable_unprepare(d->clk); @@ -351,6 +368,37 @@ static bool dw8250_idma_filter(struct dma_chan *chan, void *param) return param == chan->device->dev->parent; } +/* + * divisor = div(I) + div(F) + * "I" means integer, "F" means fractional + * quot = div(I) = clk / (16 * baud) + * frac = div(F) * 2^dlf_size + * + * let rem = clk % (16 * baud) + * we have: div(F) * (16 * baud) = rem + * so frac = 2^dlf_size * rem / (16 * baud) = (rem << dlf_size) / (16 * baud) + */ +static unsigned int dw8250_get_divisor(struct uart_port *p, + unsigned int baud, + unsigned int *frac) +{ + unsigned int quot, rem, base_baud = baud * 16; + struct dw8250_data *d = p->private_data; + + quot = p->uartclk / base_baud; + rem = p->uartclk % base_baud; + *frac = DIV_ROUND_CLOSEST(rem << d->dlf_size, base_baud); + + return quot; +} + +static void dw8250_set_divisor(struct uart_port *p, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + dw8250_writel_ext(p, DW_UART_DLF, quot_frac); + serial8250_do_set_divisor(p, baud, quot, quot_frac); +} + static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { if (p->dev->of_node) { @@ -404,20 +452,26 @@ static void dw8250_setup_port(struct uart_port *p) * If the Component Version Register returns zero, we know that * ADDITIONAL_FEATURES are not enabled. No need to go any further. */ - if (p->iotype == UPIO_MEM32BE) - reg = ioread32be(p->membase + DW_UART_UCV); - else - reg = readl(p->membase + DW_UART_UCV); + reg = dw8250_readl_ext(p, DW_UART_UCV); if (!reg) return; dev_dbg(p->dev, "Designware UART version %c.%c%c\n", (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); - if (p->iotype == UPIO_MEM32BE) - reg = ioread32be(p->membase + DW_UART_CPR); - else - reg = readl(p->membase + DW_UART_CPR); + dw8250_writel_ext(p, DW_UART_DLF, ~0U); + reg = dw8250_readl_ext(p, DW_UART_DLF); + dw8250_writel_ext(p, DW_UART_DLF, 0); + + if (reg) { + struct dw8250_data *d = p->private_data; + + d->dlf_size = fls(reg); + p->get_divisor = dw8250_get_divisor; + p->set_divisor = dw8250_set_divisor; + } + + reg = dw8250_readl_ext(p, DW_UART_CPR); if (!reg) return; @@ -693,6 +747,7 @@ static const struct of_device_id dw8250_of_match[] = { { .compatible = "snps,dw-apb-uart" }, { .compatible = "cavium,octeon-3860-uart" }, { .compatible = "marvell,armada-38x-uart" }, + { .compatible = "renesas,rzn1-uart" }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, dw8250_of_match); @@ -707,6 +762,7 @@ static const struct acpi_device_id dw8250_acpi_match[] = { { "APMC0D08", 0}, { "AMD0020", 0 }, { "AMDI0020", 0 }, + { "BRCM2032", 0 }, { "HISI0031", 0 }, { }, }; diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c index f6a86f2bc4e5..2a76e22d2ec0 100644 --- a/drivers/tty/serial/8250/8250_em.c +++ b/drivers/tty/serial/8250/8250_em.c @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/mod_devicetable.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> #include <linux/platform_device.h> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 38af306ca0e8..0089aa305ef9 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -109,11 +109,12 @@ struct exar8250_platform { * struct exar8250_board - board information * @num_ports: number of serial ports * @reg_shift: describes UART register mapping in PCI memory + * @setup: quirk run at ->probe() stage + * @exit: quirk run at ->remove() stage */ struct exar8250_board { unsigned int num_ports; unsigned int reg_shift; - bool has_slave; int (*setup)(struct exar8250 *, struct pci_dev *, struct uart_8250_port *, int); void (*exit)(struct pci_dev *pcidev); @@ -272,8 +273,32 @@ static int xr17v35x_register_gpio(struct pci_dev *pcidev, return 0; } +static int generic_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); + u8 __iomem *p = port->membase; + u8 value; + + value = readb(p + UART_EXAR_FCTR); + if (is_rs485) + value |= UART_FCTR_EXAR_485; + else + value &= ~UART_FCTR_EXAR_485; + + writeb(value, p + UART_EXAR_FCTR); + + if (is_rs485) + writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR); + + port->rs485 = *rs485; + + return 0; +} + static const struct exar8250_platform exar8250_default_platform = { .register_gpio = xr17v35x_register_gpio, + .rs485_config = generic_rs485_config, }; static int iot2040_rs485_config(struct uart_port *port, @@ -306,19 +331,7 @@ static int iot2040_rs485_config(struct uart_port *port, value |= mode; writeb(value, p + UART_EXAR_MPIOLVL_7_0); - value = readb(p + UART_EXAR_FCTR); - if (is_rs485) - value |= UART_FCTR_EXAR_485; - else - value &= ~UART_FCTR_EXAR_485; - writeb(value, p + UART_EXAR_FCTR); - - if (is_rs485) - writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR); - - port->rs485 = *rs485; - - return 0; + return generic_rs485_config(port, rs485); } static const struct property_entry iot2040_gpio_properties[] = { @@ -364,7 +377,6 @@ static int pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, struct uart_8250_port *port, int idx) { - const struct exar8250_board *board = priv->board; const struct exar8250_platform *platform; const struct dmi_system_id *dmi_match; unsigned int offset = idx * 0x400; @@ -382,10 +394,10 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, port->port.rs485_config = platform->rs485_config; /* - * Setup the uart clock for the devices on expansion slot to + * Setup the UART clock for the devices on expansion slot to * half the clock speed of the main chip (which is 125MHz) */ - if (board->has_slave && idx >= 8) + if (idx >= 8) port->port.uartclk /= 2; ret = default_setup(priv, pcidev, idx, offset, port); @@ -433,7 +445,11 @@ static irqreturn_t exar_misc_handler(int irq, void *data) struct exar8250 *priv = data; /* Clear all PCI interrupts by reading INT0. No effect on IIR */ - ioread8(priv->virt + UART_EXAR_INT0); + readb(priv->virt + UART_EXAR_INT0); + + /* Clear INT0 for Expansion Interface slave ports, too */ + if (priv->board->num_ports > 8) + readb(priv->virt + 0x2000 + UART_EXAR_INT0); return IRQ_HANDLED; } @@ -590,14 +606,12 @@ static const struct exar8250_board pbn_exar_XR17V35x = { static const struct exar8250_board pbn_exar_XR17V4358 = { .num_ports = 12, - .has_slave = true, .setup = pci_xr17v35x_setup, .exit = pci_xr17v35x_exit, }; static const struct exar8250_board pbn_exar_XR17V8358 = { .num_ports = 16, - .has_slave = true, .setup = pci_xr17v35x_setup, .exit = pci_xr17v35x_exit, }; diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index bfb37f0be22f..af8beefe9b5c 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -124,7 +124,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev, dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n", prop); ret = -EINVAL; - goto err_dispose; + goto err_unprepare; } } port->flags |= UPF_IOREMAP; @@ -144,6 +144,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev, port->line = ret; port->irq = irq_of_parse_and_map(np, 0); + if (!port->irq) { + ret = -EPROBE_DEFER; + goto err_unprepare; + } info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL); if (IS_ERR(info->rst)) { diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 1b337fee07ed..a019286f8bb6 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1115,6 +1115,7 @@ static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE; static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE; static const struct of_device_id omap8250_dt_ids[] = { + { .compatible = "ti,am654-uart" }, { .compatible = "ti,omap2-uart" }, { .compatible = "ti,omap3-uart" }, { .compatible = "ti,omap4-uart", .data = &omap4_habit, }, diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index cf541aab2bd0..3f779d25ec0c 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -90,8 +90,7 @@ static const struct serial8250_config uart_config[] = { .name = "16550A", .fifo_size = 16, .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO, }, @@ -1211,8 +1210,8 @@ static void autoconfig(struct uart_8250_port *up) if (!port->iobase && !port->mapbase && !port->membase) return; - DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", - serial_index(port), port->iobase, port->membase); + DEBUG_AUTOCONF("%s: autoconf (0x%04lx, 0x%p): ", + port->name, port->iobase, port->membase); /* * We really do need global IRQs disabled here - we're going to @@ -1363,9 +1362,8 @@ out_lock: fintek_8250_probe(up); if (up->capabilities != old_capabilities) { - pr_warn("ttyS%d: detected caps %08x should be %08x\n", - serial_index(port), old_capabilities, - up->capabilities); + pr_warn("%s: detected caps %08x should be %08x\n", + port->name, old_capabilities, up->capabilities); } out: DEBUG_AUTOCONF("iir=%d ", scratch); @@ -2212,8 +2210,7 @@ int serial8250_do_startup(struct uart_port *port) */ if (!(port->flags & UPF_BUGGY_UART) && (serial_port_in(port, UART_LSR) == 0xff)) { - printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n", - serial_index(port)); + pr_info_ratelimited("%s: LSR safety check engaged!\n", port->name); retval = -ENODEV; goto out; } @@ -2245,8 +2242,8 @@ int serial8250_do_startup(struct uart_port *port) (port->type == PORT_ALTR_16550_F128)) && (port->fifosize > 1)) { /* Bounds checking of TX threshold (valid 0 to fifosize-2) */ if ((up->tx_loadsz < 2) || (up->tx_loadsz > port->fifosize)) { - pr_err("ttyS%d TX FIFO Threshold errors, skipping\n", - serial_index(port)); + pr_err("%s TX FIFO Threshold errors, skipping\n", + port->name); } else { serial_port_out(port, UART_ALTR_AFR, UART_ALTR_EN_TXFIFO_LW); @@ -2343,8 +2340,8 @@ int serial8250_do_startup(struct uart_port *port) if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { if (!(up->bugs & UART_BUG_TXEN)) { up->bugs |= UART_BUG_TXEN; - pr_debug("ttyS%d - enabling bad tx status workarounds\n", - serial_index(port)); + pr_debug("%s - enabling bad tx status workarounds\n", + port->name); } } else { up->bugs &= ~UART_BUG_TXEN; @@ -2373,8 +2370,8 @@ dont_test_tx_en: if (up->dma) { retval = serial8250_request_dma(up); if (retval) { - pr_warn_ratelimited("ttyS%d - failed to request DMA\n", - serial_index(port)); + pr_warn_ratelimited("%s - failed to request DMA\n", + port->name); up->dma = NULL; } } @@ -2498,11 +2495,11 @@ static unsigned int npcm_get_divisor(struct uart_8250_port *up, return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2; } -static unsigned int serial8250_get_divisor(struct uart_8250_port *up, - unsigned int baud, - unsigned int *frac) +static unsigned int serial8250_do_get_divisor(struct uart_port *port, + unsigned int baud, + unsigned int *frac) { - struct uart_port *port = &up->port; + struct uart_8250_port *up = up_to_u8250p(port); unsigned int quot; /* @@ -2532,6 +2529,16 @@ static unsigned int serial8250_get_divisor(struct uart_8250_port *up, return quot; } +static unsigned int serial8250_get_divisor(struct uart_port *port, + unsigned int baud, + unsigned int *frac) +{ + if (port->get_divisor) + return port->get_divisor(port, baud, frac); + + return serial8250_do_get_divisor(port, baud, frac); +} + static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, tcflag_t c_cflag) { @@ -2570,8 +2577,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up, return cval; } -static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, - unsigned int quot, unsigned int quot_frac) +void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac) { struct uart_8250_port *up = up_to_u8250p(port); @@ -2602,6 +2609,16 @@ static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, serial_port_out(port, 0x2, quot_frac); } } +EXPORT_SYMBOL_GPL(serial8250_do_set_divisor); + +static void serial8250_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int quot_frac) +{ + if (port->set_divisor) + port->set_divisor(port, baud, quot, quot_frac); + else + serial8250_do_set_divisor(port, baud, quot, quot_frac); +} static unsigned int serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios, @@ -2636,7 +2653,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, cval = serial8250_compute_lcr(up, termios->c_cflag); baud = serial8250_get_baud_rate(port, termios, old); - quot = serial8250_get_divisor(up, baud, &frac); + quot = serial8250_get_divisor(port, baud, &frac); /* * Ok, we're now changing the port state. Do it with @@ -3197,7 +3214,7 @@ static void serial8250_console_restore(struct uart_8250_port *up) termios.c_cflag = port->state->port.tty->termios.c_cflag; baud = serial8250_get_baud_rate(port, &termios, NULL); - quot = serial8250_get_divisor(up, baud, &frac); + quot = serial8250_get_divisor(port, baud, &frac); serial8250_set_divisor(port, baud, quot, frac); serial_port_out(port, UART_LCR, up->lcr); diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c index 9963a766dcfb..c8186a05a453 100644 --- a/drivers/tty/serial/8250/serial_cs.c +++ b/drivers/tty/serial/8250/serial_cs.c @@ -638,8 +638,10 @@ static int serial_config(struct pcmcia_device *link) (link->has_func_id) && (link->socket->pcmcia_pfc == 0) && ((link->func_id == CISTPL_FUNCID_MULTI) || - (link->func_id == CISTPL_FUNCID_SERIAL))) - pcmcia_loop_config(link, serial_check_for_multi, info); + (link->func_id == CISTPL_FUNCID_SERIAL))) { + if (pcmcia_loop_config(link, serial_check_for_multi, info)) + goto failed; + } /* * Apply any multi-port quirk. diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 4e853570ea80..239c0fa2e981 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -314,7 +314,8 @@ static u32 imx_uart_readl(struct imx_port *sport, u32 offset) /* * UCR2_SRST is the only bit in the cached registers that might * differ from the value that was last written. As it only - * clears after being set, reread conditionally. + * automatically becomes one after being cleared, reread + * conditionally. */ if (!(sport->ucr2 & UCR2_SRST)) sport->ucr2 = readl(sport->port.membase + offset); @@ -1051,7 +1052,7 @@ static void imx_uart_dma_rx_callback(void *data) unsigned int r_bytes; unsigned int bd_size; - status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state); + status = dmaengine_tx_status(chan, sport->rx_cookie, &state); if (status == DMA_ERROR) { imx_uart_clear_rx_errors(sport); diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index b6bd6e15e07b..689774c073ca 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -430,7 +430,6 @@ int jsm_uart_port_init(struct jsm_board *brd) { int i, rc; unsigned int line; - struct jsm_channel *ch; if (!brd) return -ENXIO; @@ -444,7 +443,7 @@ int jsm_uart_port_init(struct jsm_board *brd) brd->nasync = brd->maxports; /* Set up channel variables */ - for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { + for (i = 0; i < brd->nasync; i++) { if (!brd->channels[i]) continue; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index efe55a1a0615..3db48fcd6068 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -531,8 +531,8 @@ static int max310x_update_best_err(unsigned long f, long *besterr) return 1; } -static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq, - bool xtal) +static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s, + unsigned long freq, bool xtal) { unsigned int div, clksrc, pllcfg = 0; long besterr = -1; @@ -588,8 +588,14 @@ static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq, regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); /* Wait for crystal */ - if (pllcfg && xtal) + if (xtal) { + unsigned int val; msleep(10); + regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); + if (!(val & MAX310X_STS_CLKREADY_BIT)) { + dev_warn(dev, "clock is not stable yet\n"); + } + } return (int)bestfreq; } @@ -1260,7 +1266,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, MAX310X_MODE1_AUTOSLEEP_BIT); } - uartclk = max310x_set_ref_clk(s, freq, xtal); + uartclk = max310x_set_ref_clk(dev, s, freq, xtal); dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); mutex_init(&s->mutex); diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index eda3c7710d6a..4932b674f7ef 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -887,7 +887,8 @@ static int serial_pxa_probe(struct platform_device *dev) goto err_clk; if (sport->port.line >= ARRAY_SIZE(serial_pxa_ports)) { dev_err(&dev->dev, "serial%d out of range\n", sport->port.line); - return -EINVAL; + ret = -EINVAL; + goto err_clk; } snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1); diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index c62e17c85f57..29ec34387246 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -17,6 +17,7 @@ #include <linux/tty_flip.h> /* UART specific GENI registers */ +#define SE_UART_LOOPBACK_CFG 0x22c #define SE_UART_TX_TRANS_CFG 0x25c #define SE_UART_TX_WORD_LEN 0x268 #define SE_UART_TX_STOP_BIT_LEN 0x26c @@ -26,6 +27,7 @@ #define SE_UART_RX_STALE_CNT 0x294 #define SE_UART_TX_PARITY_CFG 0x2a4 #define SE_UART_RX_PARITY_CFG 0x2a8 +#define SE_UART_MANUAL_RFR 0x2ac /* SE_UART_TRANS_CFG */ #define UART_TX_PAR_EN BIT(0) @@ -62,6 +64,11 @@ #define PAR_SPACE 0x10 #define PAR_MARK 0x11 +/* SE_UART_MANUAL_RFR register fields */ +#define UART_MANUAL_RFR_EN BIT(31) +#define UART_RFR_NOT_READY BIT(1) +#define UART_RFR_READY BIT(0) + /* UART M_CMD OP codes */ #define UART_START_TX 0x1 #define UART_START_BREAK 0x4 @@ -74,10 +81,12 @@ #define STALE_TIMEOUT 16 #define DEFAULT_BITS_PER_CHAR 10 #define GENI_UART_CONS_PORTS 1 +#define GENI_UART_PORTS 3 #define DEF_FIFO_DEPTH_WORDS 16 #define DEF_TX_WM 2 #define DEF_FIFO_WIDTH_BITS 32 #define UART_CONSOLE_RX_WM 2 +#define MAX_LOOPBACK_CFG 3 #ifdef CONFIG_CONSOLE_POLL #define RX_BYTES_PW 1 @@ -101,22 +110,81 @@ struct qcom_geni_serial_port { unsigned int baud; unsigned int tx_bytes_pw; unsigned int rx_bytes_pw; + u32 *rx_fifo; + u32 loopback; bool brk; }; static const struct uart_ops qcom_geni_console_pops; +static const struct uart_ops qcom_geni_uart_pops; static struct uart_driver qcom_geni_console_driver; +static struct uart_driver qcom_geni_uart_driver; static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop); +static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop); static unsigned int qcom_geni_serial_tx_empty(struct uart_port *port); static void qcom_geni_serial_stop_rx(struct uart_port *uport); static const unsigned long root_freq[] = {7372800, 14745600, 19200000, 29491200, 32000000, 48000000, 64000000, 80000000, - 96000000, 100000000}; + 96000000, 100000000, 102400000, + 112000000, 120000000, 128000000}; #define to_dev_port(ptr, member) \ container_of(ptr, struct qcom_geni_serial_port, member) +static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = { + [0] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, + [2] = { + .uport = { + .iotype = UPIO_MEM, + .ops = &qcom_geni_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + }, + }, +}; + +static ssize_t loopback_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct platform_device *pdev = to_platform_device(dev); + struct qcom_geni_serial_port *port = platform_get_drvdata(pdev); + + return snprintf(buf, sizeof(u32), "%d\n", port->loopback); +} + +static ssize_t loopback_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t size) +{ + struct platform_device *pdev = to_platform_device(dev); + struct qcom_geni_serial_port *port = platform_get_drvdata(pdev); + u32 loopback; + + if (kstrtoint(buf, 0, &loopback) || loopback > MAX_LOOPBACK_CFG) { + dev_err(dev, "Invalid input\n"); + return -EINVAL; + } + port->loopback = loopback; + return size; +} +static DEVICE_ATTR_RW(loopback); + static struct qcom_geni_serial_port qcom_geni_console_port = { .uport = { .iotype = UPIO_MEM, @@ -148,14 +216,33 @@ static void qcom_geni_serial_config_port(struct uart_port *uport, int cfg_flags) } } -static unsigned int qcom_geni_cons_get_mctrl(struct uart_port *uport) +static unsigned int qcom_geni_serial_get_mctrl(struct uart_port *uport) { - return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; + unsigned int mctrl = TIOCM_DSR | TIOCM_CAR; + u32 geni_ios; + + if (uart_console(uport) || !uart_cts_enabled(uport)) { + mctrl |= TIOCM_CTS; + } else { + geni_ios = readl_relaxed(uport->membase + SE_GENI_IOS); + if (!(geni_ios & IO2_DATA_IN)) + mctrl |= TIOCM_CTS; + } + + return mctrl; } -static void qcom_geni_cons_set_mctrl(struct uart_port *uport, +static void qcom_geni_serial_set_mctrl(struct uart_port *uport, unsigned int mctrl) { + u32 uart_manual_rfr = 0; + + if (uart_console(uport) || !uart_cts_enabled(uport)) + return; + + if (!(mctrl & TIOCM_RTS)) + uart_manual_rfr = UART_MANUAL_RFR_EN | UART_RFR_NOT_READY; + writel_relaxed(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR); } static const char *qcom_geni_serial_get_type(struct uart_port *uport) @@ -163,11 +250,16 @@ static const char *qcom_geni_serial_get_type(struct uart_port *uport) return "MSM"; } -static struct qcom_geni_serial_port *get_port_from_line(int line) +static struct qcom_geni_serial_port *get_port_from_line(int line, bool console) { - if (line < 0 || line >= GENI_UART_CONS_PORTS) + struct qcom_geni_serial_port *port; + int nr_ports = console ? GENI_UART_CONS_PORTS : GENI_UART_PORTS; + + if (line < 0 || line >= nr_ports) return ERR_PTR(-ENXIO); - return &qcom_geni_console_port; + + port = console ? &qcom_geni_console_port : &qcom_geni_uart_ports[line]; + return port; } static bool qcom_geni_serial_poll_bit(struct uart_port *uport, @@ -346,7 +438,7 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS); - port = get_port_from_line(co->index); + port = get_port_from_line(co->index, true); if (IS_ERR(port)) return; @@ -420,6 +512,32 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) #endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ +static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) +{ + unsigned char *buf; + struct tty_port *tport; + struct qcom_geni_serial_port *port = to_dev_port(uport, uport); + u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE; + u32 words = ALIGN(bytes, num_bytes_pw) / num_bytes_pw; + int ret; + + tport = &uport->state->port; + ioread32_rep(uport->membase + SE_GENI_RX_FIFOn, port->rx_fifo, words); + if (drop) + return 0; + + buf = (unsigned char *)port->rx_fifo; + ret = tty_insert_flip_string(tport, buf, bytes); + if (ret != bytes) { + dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n", + __func__, ret, bytes); + WARN_ON_ONCE(1); + } + uport->icount.rx += ret; + tty_flip_buffer_push(tport); + return ret; +} + static void qcom_geni_serial_start_tx(struct uart_port *uport) { u32 irq_en; @@ -586,6 +704,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport) u32 status; unsigned int chunk; int tail; + u32 irq_en; chunk = uart_circ_chars_pending(xmit); status = readl_relaxed(uport->membase + SE_GENI_TX_FIFO_STATUS); @@ -595,6 +714,13 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport) goto out_write_wakeup; } + if (!uart_console(uport)) { + irq_en = readl_relaxed(uport->membase + SE_GENI_M_IRQ_EN); + irq_en &= ~(M_TX_FIFO_WATERMARK_EN); + writel_relaxed(0, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel_relaxed(irq_en, uport->membase + SE_GENI_M_IRQ_EN); + } + avail = (port->tx_fifo_depth - port->tx_wm) * port->tx_bytes_pw; tail = xmit->tail; chunk = min3((size_t)chunk, (size_t)(UART_XMIT_SIZE - tail), avail); @@ -623,7 +749,8 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport) } xmit->tail = tail & (UART_XMIT_SIZE - 1); - qcom_geni_serial_poll_tx_done(uport); + if (uart_console(uport)) + qcom_geni_serial_poll_tx_done(uport); out_write_wakeup: if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(uport); @@ -710,7 +837,8 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport) unsigned long flags; /* Stop the console before stopping the current tx */ - console_stop(uport->cons); + if (uart_console(uport)) + console_stop(uport->cons); free_irq(uport->irq, uport); spin_lock_irqsave(&uport->lock, flags); @@ -731,13 +859,20 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) * it else we could end up in data loss scenarios. */ port->xfer_mode = GENI_SE_FIFO; - qcom_geni_serial_poll_tx_done(uport); + if (uart_console(uport)) + qcom_geni_serial_poll_tx_done(uport); geni_se_config_packing(&port->se, BITS_PER_BYTE, port->tx_bytes_pw, false, true, false); geni_se_config_packing(&port->se, BITS_PER_BYTE, port->rx_bytes_pw, false, false, true); geni_se_init(&port->se, port->rx_wm, port->rx_rfr); geni_se_select_mode(&port->se, port->xfer_mode); + if (!uart_console(uport)) { + port->rx_fifo = devm_kzalloc(uport->dev, + port->rx_fifo_depth * sizeof(u32), GFP_KERNEL); + if (!port->rx_fifo) + return -ENOMEM; + } port->setup = true; return 0; } @@ -749,8 +884,13 @@ static int qcom_geni_serial_startup(struct uart_port *uport) struct qcom_geni_serial_port *port = to_dev_port(uport, uport); scnprintf(port->name, sizeof(port->name), - "qcom_serial_geni%d", uport->line); + "qcom_serial_%s%d", + (uart_console(uport) ? "console" : "uart"), uport->line); + if (!uart_console(uport)) { + port->tx_bytes_pw = 4; + port->rx_bytes_pw = RX_BYTES_PW; + } proto = geni_se_read_proto(&port->se); if (proto != GENI_SE_UART) { dev_err(uport->dev, "Invalid FW loaded, proto: %d\n", proto); @@ -886,6 +1026,9 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, if (baud) uart_update_timeout(uport, termios->c_cflag, baud); + if (!uart_console(uport)) + writel_relaxed(port->loopback, + uport->membase + SE_UART_LOOPBACK_CFG); writel_relaxed(tx_trans_cfg, uport->membase + SE_UART_TX_TRANS_CFG); writel_relaxed(tx_parity_cfg, uport->membase + SE_UART_TX_PARITY_CFG); writel_relaxed(rx_trans_cfg, uport->membase + SE_UART_RX_TRANS_CFG); @@ -917,7 +1060,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options) if (co->index >= GENI_UART_CONS_PORTS || co->index < 0) return -ENXIO; - port = get_port_from_line(co->index); + port = get_port_from_line(co->index, true); if (IS_ERR(port)) { pr_err("Invalid line %d\n", co->index); return PTR_ERR(port); @@ -1048,16 +1191,23 @@ static void console_unregister(struct uart_driver *drv) } #endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ -static void qcom_geni_serial_cons_pm(struct uart_port *uport, +static struct uart_driver qcom_geni_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "qcom_geni_uart", + .dev_name = "ttyHS", + .nr = GENI_UART_PORTS, +}; + +static void qcom_geni_serial_pm(struct uart_port *uport, unsigned int new_state, unsigned int old_state) { struct qcom_geni_serial_port *port = to_dev_port(uport, uport); - if (unlikely(!uart_console(uport))) - return; - if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) geni_se_resources_on(&port->se); + else if (!uart_console(uport) && (new_state == UART_PM_STATE_ON && + old_state == UART_PM_STATE_UNDEFINED)) + geni_se_resources_on(&port->se); else if (new_state == UART_PM_STATE_OFF && old_state == UART_PM_STATE_ON) geni_se_resources_off(&port->se); @@ -1074,13 +1224,29 @@ static const struct uart_ops qcom_geni_console_pops = { .config_port = qcom_geni_serial_config_port, .shutdown = qcom_geni_serial_shutdown, .type = qcom_geni_serial_get_type, - .set_mctrl = qcom_geni_cons_set_mctrl, - .get_mctrl = qcom_geni_cons_get_mctrl, + .set_mctrl = qcom_geni_serial_set_mctrl, + .get_mctrl = qcom_geni_serial_get_mctrl, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = qcom_geni_serial_get_char, .poll_put_char = qcom_geni_serial_poll_put_char, #endif - .pm = qcom_geni_serial_cons_pm, + .pm = qcom_geni_serial_pm, +}; + +static const struct uart_ops qcom_geni_uart_pops = { + .tx_empty = qcom_geni_serial_tx_empty, + .stop_tx = qcom_geni_serial_stop_tx, + .start_tx = qcom_geni_serial_start_tx, + .stop_rx = qcom_geni_serial_stop_rx, + .set_termios = qcom_geni_serial_set_termios, + .startup = qcom_geni_serial_startup, + .request_port = qcom_geni_serial_request_port, + .config_port = qcom_geni_serial_config_port, + .shutdown = qcom_geni_serial_shutdown, + .type = qcom_geni_serial_get_type, + .set_mctrl = qcom_geni_serial_set_mctrl, + .get_mctrl = qcom_geni_serial_get_mctrl, + .pm = qcom_geni_serial_pm, }; static int qcom_geni_serial_probe(struct platform_device *pdev) @@ -1091,13 +1257,23 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) struct uart_port *uport; struct resource *res; int irq; + bool console = false; + struct uart_driver *drv; - if (pdev->dev.of_node) - line = of_alias_get_id(pdev->dev.of_node, "serial"); + if (of_device_is_compatible(pdev->dev.of_node, "qcom,geni-debug-uart")) + console = true; - if (line < 0 || line >= GENI_UART_CONS_PORTS) - return -ENXIO; - port = get_port_from_line(line); + if (pdev->dev.of_node) { + if (console) { + drv = &qcom_geni_console_driver; + line = of_alias_get_id(pdev->dev.of_node, "serial"); + } else { + drv = &qcom_geni_uart_driver; + line = of_alias_get_id(pdev->dev.of_node, "hsuart"); + } + } + + port = get_port_from_line(line, console); if (IS_ERR(port)) { dev_err(&pdev->dev, "Invalid line %d\n", line); return PTR_ERR(port); @@ -1134,10 +1310,12 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) } uport->irq = irq; - uport->private_data = &qcom_geni_console_driver; + uport->private_data = drv; platform_set_drvdata(pdev, port); - port->handle_rx = handle_rx_console; - return uart_add_one_port(&qcom_geni_console_driver, uport); + port->handle_rx = console ? handle_rx_console : handle_rx_uart; + if (!console) + device_create_file(uport->dev, &dev_attr_loopback); + return uart_add_one_port(drv, uport); } static int qcom_geni_serial_remove(struct platform_device *pdev) @@ -1154,7 +1332,17 @@ static int __maybe_unused qcom_geni_serial_sys_suspend_noirq(struct device *dev) struct qcom_geni_serial_port *port = dev_get_drvdata(dev); struct uart_port *uport = &port->uport; - uart_suspend_port(uport->private_data, uport); + if (uart_console(uport)) { + uart_suspend_port(uport->private_data, uport); + } else { + struct uart_state *state = uport->state; + /* + * If the port is open, deny system suspend. + */ + if (state->pm_state == UART_PM_STATE_ON) + return -EBUSY; + } + return 0; } @@ -1163,7 +1351,8 @@ static int __maybe_unused qcom_geni_serial_sys_resume_noirq(struct device *dev) struct qcom_geni_serial_port *port = dev_get_drvdata(dev); struct uart_port *uport = &port->uport; - if (console_suspend_enabled && uport->suspended) { + if (uart_console(uport) && + console_suspend_enabled && uport->suspended) { uart_resume_port(uport->private_data, uport); /* * uart_suspend_port() invokes port shutdown which in turn @@ -1185,6 +1374,7 @@ static const struct dev_pm_ops qcom_geni_serial_pm_ops = { static const struct of_device_id qcom_geni_serial_match_table[] = { { .compatible = "qcom,geni-debug-uart", }, + { .compatible = "qcom,geni-uart", }, {} }; MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table); @@ -1207,9 +1397,17 @@ static int __init qcom_geni_serial_init(void) if (ret) return ret; + ret = uart_register_driver(&qcom_geni_uart_driver); + if (ret) { + console_unregister(&qcom_geni_console_driver); + return ret; + } + ret = platform_driver_register(&qcom_geni_serial_platform_driver); - if (ret) + if (ret) { console_unregister(&qcom_geni_console_driver); + uart_unregister_driver(&qcom_geni_uart_driver); + } return ret; } module_init(qcom_geni_serial_init); @@ -1218,6 +1416,7 @@ static void __exit qcom_geni_serial_exit(void) { platform_driver_unregister(&qcom_geni_serial_platform_driver); console_unregister(&qcom_geni_console_driver); + uart_unregister_driver(&qcom_geni_uart_driver); } module_exit(qcom_geni_serial_exit); diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index d6ae3086c2a2..339befdd2f4d 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -14,6 +14,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/module.h> +#include <linux/mod_devicetable.h> #include <linux/device.h> #include <linux/console.h> #include <linux/serial_core.h> diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 9c14a453f73c..80bb56facfb6 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -182,6 +182,7 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, { struct uart_port *uport = uart_port_check(state); unsigned long page; + unsigned long flags = 0; int retval = 0; if (uport->type == PORT_UNKNOWN) @@ -196,15 +197,18 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, * Initialise and allocate the transmit and temporary * buffer. */ - if (!state->xmit.buf) { - /* This is protected by the per port mutex */ - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + uart_port_lock(state, flags); + if (!state->xmit.buf) { state->xmit.buf = (unsigned char *) page; uart_circ_clear(&state->xmit); + } else { + free_page(page); } + uart_port_unlock(uport, flags); retval = uport->ops->startup(uport); if (retval == 0) { @@ -263,6 +267,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) { struct uart_port *uport = uart_port_check(state); struct tty_port *port = &state->port; + unsigned long flags = 0; /* * Set the TTY IO error marker @@ -295,10 +300,12 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) /* * Free the transmit buffer page. */ + uart_port_lock(state, flags); if (state->xmit.buf) { free_page((unsigned long)state->xmit.buf); state->xmit.buf = NULL; } + uart_port_unlock(uport, flags); } /** diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index c181eb37f985..ac4424bf6b13 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -65,6 +65,8 @@ enum { SCIx_RXI_IRQ, SCIx_TXI_IRQ, SCIx_BRI_IRQ, + SCIx_DRI_IRQ, + SCIx_TEI_IRQ, SCIx_NR_IRQS, SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ @@ -135,6 +137,8 @@ struct sci_port { struct dma_chan *chan_rx; #ifdef CONFIG_SERIAL_SH_SCI_DMA + struct dma_chan *chan_tx_saved; + struct dma_chan *chan_rx_saved; dma_cookie_t cookie_tx; dma_cookie_t cookie_rx[2]; dma_cookie_t active_rx; @@ -315,15 +319,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = { [SCIx_SH4_SCIF_REGTYPE] = { .regs = { [SCSMR] = { 0x00, 16 }, - [SCBRR] = { 0x04, 8 }, - [SCSCR] = { 0x08, 16 }, - [SCxTDR] = { 0x0c, 8 }, - [SCxSR] = { 0x10, 16 }, - [SCxRDR] = { 0x14, 8 }, - [SCFCR] = { 0x18, 16 }, - [SCFDR] = { 0x1c, 16 }, - [SCSPTR] = { 0x20, 16 }, - [SCLSR] = { 0x24, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 16 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 16 }, + [SCFDR] = { 0x0e, 16 }, + [SCSPTR] = { 0x10, 16 }, + [SCLSR] = { 0x12, 16 }, }, .fifosize = 16, .overrun_reg = SCLSR, @@ -1212,25 +1216,16 @@ static int sci_dma_rx_find_active(struct sci_port *s) return -1; } -static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) +static void sci_rx_dma_release(struct sci_port *s) { - struct dma_chan *chan = s->chan_rx; - struct uart_port *port = &s->port; - unsigned long flags; + struct dma_chan *chan = s->chan_rx_saved; - spin_lock_irqsave(&port->lock, flags); - s->chan_rx = NULL; + s->chan_rx_saved = s->chan_rx = NULL; s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; - spin_unlock_irqrestore(&port->lock, flags); - dmaengine_terminate_all(chan); + dmaengine_terminate_sync(chan); dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0], sg_dma_address(&s->sg_rx[0])); dma_release_channel(chan); - if (enable_pio) { - spin_lock_irqsave(&port->lock, flags); - sci_start_rx(port); - spin_unlock_irqrestore(&port->lock, flags); - } } static void start_hrtimer_us(struct hrtimer *hrt, unsigned long usec) @@ -1289,33 +1284,31 @@ static void sci_dma_rx_complete(void *arg) fail: spin_unlock_irqrestore(&port->lock, flags); dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); - sci_rx_dma_release(s, true); + /* Switch to PIO */ + spin_lock_irqsave(&port->lock, flags); + s->chan_rx = NULL; + sci_start_rx(port); + spin_unlock_irqrestore(&port->lock, flags); } -static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) +static void sci_tx_dma_release(struct sci_port *s) { - struct dma_chan *chan = s->chan_tx; - struct uart_port *port = &s->port; - unsigned long flags; + struct dma_chan *chan = s->chan_tx_saved; - spin_lock_irqsave(&port->lock, flags); - s->chan_tx = NULL; + cancel_work_sync(&s->work_tx); + s->chan_tx_saved = s->chan_tx = NULL; s->cookie_tx = -EINVAL; - spin_unlock_irqrestore(&port->lock, flags); - dmaengine_terminate_all(chan); + dmaengine_terminate_sync(chan); dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE, DMA_TO_DEVICE); dma_release_channel(chan); - if (enable_pio) { - spin_lock_irqsave(&port->lock, flags); - sci_start_tx(port); - spin_unlock_irqrestore(&port->lock, flags); - } } static void sci_submit_rx(struct sci_port *s) { struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + unsigned long flags; int i; for (i = 0; i < 2; i++) { @@ -1343,11 +1336,15 @@ static void sci_submit_rx(struct sci_port *s) fail: if (i) - dmaengine_terminate_all(chan); + dmaengine_terminate_async(chan); for (i = 0; i < 2; i++) s->cookie_rx[i] = -EINVAL; s->active_rx = -EINVAL; - sci_rx_dma_release(s, true); + /* Switch to PIO */ + spin_lock_irqsave(&port->lock, flags); + s->chan_rx = NULL; + sci_start_rx(port); + spin_unlock_irqrestore(&port->lock, flags); } static void work_fn_tx(struct work_struct *work) @@ -1357,6 +1354,7 @@ static void work_fn_tx(struct work_struct *work) struct dma_chan *chan = s->chan_tx; struct uart_port *port = &s->port; struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; dma_addr_t buf; /* @@ -1378,9 +1376,7 @@ static void work_fn_tx(struct work_struct *work) DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n"); - /* switch to PIO */ - sci_tx_dma_release(s, true); - return; + goto switch_to_pio; } dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len, @@ -1393,15 +1389,21 @@ static void work_fn_tx(struct work_struct *work) s->cookie_tx = dmaengine_submit(desc); if (dma_submit_error(s->cookie_tx)) { dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); - /* switch to PIO */ - sci_tx_dma_release(s, true); - return; + goto switch_to_pio; } dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx); dma_async_issue_pending(chan); + return; + +switch_to_pio: + spin_lock_irqsave(&port->lock, flags); + s->chan_tx = NULL; + sci_start_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + return; } static enum hrtimer_restart rx_timer_fn(struct hrtimer *t) @@ -1452,7 +1454,7 @@ static enum hrtimer_restart rx_timer_fn(struct hrtimer *t) } /* Handle incomplete DMA receive */ - dmaengine_terminate_all(s->chan_rx); + dmaengine_terminate_async(s->chan_rx); read = sg_dma_len(&s->sg_rx[active]) - state.residue; if (read) { @@ -1535,7 +1537,6 @@ static void sci_request_dma(struct uart_port *port) chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV); dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); if (chan) { - s->chan_tx = chan; /* UART circular tx buffer is an aligned page. */ s->tx_dma_addr = dma_map_single(chan->device->dev, port->state->xmit.buf, @@ -1544,14 +1545,14 @@ static void sci_request_dma(struct uart_port *port) if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) { dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n"); dma_release_channel(chan); - s->chan_tx = NULL; } else { dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n", __func__, UART_XMIT_SIZE, port->state->xmit.buf, &s->tx_dma_addr); - } - INIT_WORK(&s->work_tx, work_fn_tx); + INIT_WORK(&s->work_tx, work_fn_tx); + s->chan_tx_saved = s->chan_tx = chan; + } } chan = sci_request_dma_chan(port, DMA_DEV_TO_MEM); @@ -1561,8 +1562,6 @@ static void sci_request_dma(struct uart_port *port) dma_addr_t dma; void *buf; - s->chan_rx = chan; - s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize); buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2, &dma, GFP_KERNEL); @@ -1570,7 +1569,6 @@ static void sci_request_dma(struct uart_port *port) dev_warn(port->dev, "Failed to allocate Rx dma buffer, using PIO\n"); dma_release_channel(chan); - s->chan_rx = NULL; return; } @@ -1591,6 +1589,8 @@ static void sci_request_dma(struct uart_port *port) if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) sci_submit_rx(s); + + s->chan_rx_saved = s->chan_rx = chan; } } @@ -1598,10 +1598,10 @@ static void sci_free_dma(struct uart_port *port) { struct sci_port *s = to_sci_port(port); - if (s->chan_tx) - sci_tx_dma_release(s, false); - if (s->chan_rx) - sci_rx_dma_release(s, false); + if (s->chan_tx_saved) + sci_tx_dma_release(s); + if (s->chan_rx_saved) + sci_rx_dma_release(s); } static void sci_flush_buffer(struct uart_port *port) @@ -1683,11 +1683,35 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr) return IRQ_HANDLED; } +static irqreturn_t sci_br_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + + /* Handle BREAKs */ + sci_handle_breaks(port); + sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port)); + + return IRQ_HANDLED; +} + static irqreturn_t sci_er_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; struct sci_port *s = to_sci_port(port); + if (s->irqs[SCIx_ERI_IRQ] == s->irqs[SCIx_BRI_IRQ]) { + /* Break and Error interrupts are muxed */ + unsigned short ssr_status = serial_port_in(port, SCxSR); + + /* Break Interrupt */ + if (ssr_status & SCxSR_BRK(port)) + sci_br_interrupt(irq, ptr); + + /* Break only? */ + if (!(ssr_status & SCxSR_ERRORS(port))) + return IRQ_HANDLED; + } + /* Handle errors */ if (port->type == PORT_SCI) { if (sci_handle_errors(port)) { @@ -1710,17 +1734,6 @@ static irqreturn_t sci_er_interrupt(int irq, void *ptr) return IRQ_HANDLED; } -static irqreturn_t sci_br_interrupt(int irq, void *ptr) -{ - struct uart_port *port = ptr; - - /* Handle BREAKs */ - sci_handle_breaks(port); - sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port)); - - return IRQ_HANDLED; -} - static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { unsigned short ssr_status, scr_status, err_enabled, orer_status = 0; @@ -1794,6 +1807,16 @@ static const struct sci_irq_desc { .handler = sci_br_interrupt, }, + [SCIx_DRI_IRQ] = { + .desc = "rx ready", + .handler = sci_rx_interrupt, + }, + + [SCIx_TEI_IRQ] = { + .desc = "tx end", + .handler = sci_tx_interrupt, + }, + /* * Special muxed handler. */ @@ -1806,12 +1829,19 @@ static const struct sci_irq_desc { static int sci_request_irq(struct sci_port *port) { struct uart_port *up = &port->port; - int i, j, ret = 0; + int i, j, w, ret = 0; for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { const struct sci_irq_desc *desc; int irq; + /* Check if already registered (muxed) */ + for (w = 0; w < i; w++) + if (port->irqs[w] == port->irqs[i]) + w = i + 1; + if (w > i) + continue; + if (SCIx_IRQ_IS_MUXED(port)) { i = SCIx_MUX_IRQ; irq = up->irq; @@ -2092,13 +2122,15 @@ static void sci_shutdown(struct uart_port *port) spin_unlock_irqrestore(&port->lock, flags); #ifdef CONFIG_SERIAL_SH_SCI_DMA - if (s->chan_rx) { + if (s->chan_rx_saved) { dev_dbg(port->dev, "%s(%d) deleting rx_timer\n", __func__, port->line); hrtimer_cancel(&s->rx_timer); } #endif + if (s->rx_trigger > 1 && s->rx_fifo_timeout > 0) + del_timer_sync(&s->rx_fifo_timer); sci_free_irq(s); sci_free_dma(port); } @@ -2778,7 +2810,7 @@ static int sci_init_single(struct platform_device *dev, { struct uart_port *port = &sci_port->port; const struct resource *res; - unsigned int i; + unsigned int i, regtype; int ret; sci_port->cfg = p; @@ -2799,22 +2831,23 @@ static int sci_init_single(struct platform_device *dev, /* The SCI generates several interrupts. They can be muxed together or * connected to different interrupt lines. In the muxed case only one - * interrupt resource is specified. In the non-muxed case three or four - * interrupt resources are specified, as the BRI interrupt is optional. + * interrupt resource is specified as there is only one interrupt ID. + * In the non-muxed case, up to 6 interrupt signals might be generated + * from the SCI, however those signals might have their own individual + * interrupt ID numbers, or muxed together with another interrupt. */ if (sci_port->irqs[0] < 0) return -ENXIO; - if (sci_port->irqs[1] < 0) { - sci_port->irqs[1] = sci_port->irqs[0]; - sci_port->irqs[2] = sci_port->irqs[0]; - sci_port->irqs[3] = sci_port->irqs[0]; - } + if (sci_port->irqs[1] < 0) + for (i = 1; i < ARRAY_SIZE(sci_port->irqs); i++) + sci_port->irqs[i] = sci_port->irqs[0]; sci_port->params = sci_probe_regmap(p); if (unlikely(sci_port->params == NULL)) return -EINVAL; + regtype = sci_port->params - sci_port_params; switch (p->type) { case PORT_SCIFB: sci_port->rx_trigger = 48; @@ -2869,6 +2902,10 @@ static int sci_init_single(struct platform_device *dev, port->regshift = 1; } + if (regtype == SCIx_SH4_SCIF_REGTYPE) + if (sci_port->reg_size >= 0x20) + port->regshift = 1; + /* * The UART port needs an IRQ value, so we peg this to the RX IRQ * for the multi-IRQ ports, which is where we are primarily diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index c47db7826189..98d3eadd2fd0 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -21,6 +21,7 @@ #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_platform.h> +#include <linux/clk.h> #define ULITE_NAME "ttyUL" #define ULITE_MAJOR 204 @@ -54,6 +55,11 @@ #define ULITE_CONTROL_RST_RX 0x02 #define ULITE_CONTROL_IE 0x10 +struct uartlite_data { + const struct uartlite_reg_ops *reg_ops; + struct clk *clk; +}; + struct uartlite_reg_ops { u32 (*in)(void __iomem *addr); void (*out)(u32 val, void __iomem *addr); @@ -91,16 +97,16 @@ static const struct uartlite_reg_ops uartlite_le = { static inline u32 uart_in32(u32 offset, struct uart_port *port) { - const struct uartlite_reg_ops *reg_ops = port->private_data; + struct uartlite_data *pdata = port->private_data; - return reg_ops->in(port->membase + offset); + return pdata->reg_ops->in(port->membase + offset); } static inline void uart_out32(u32 val, u32 offset, struct uart_port *port) { - const struct uartlite_reg_ops *reg_ops = port->private_data; + struct uartlite_data *pdata = port->private_data; - reg_ops->out(val, port->membase + offset); + pdata->reg_ops->out(val, port->membase + offset); } static struct uart_port ulite_ports[ULITE_NR_UARTS]; @@ -257,8 +263,15 @@ static void ulite_break_ctl(struct uart_port *port, int ctl) static int ulite_startup(struct uart_port *port) { + struct uartlite_data *pdata = port->private_data; int ret; + ret = clk_enable(pdata->clk); + if (ret) { + dev_err(port->dev, "Failed to enable clock\n"); + return ret; + } + ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING, "uartlite", port); if (ret) @@ -273,9 +286,12 @@ static int ulite_startup(struct uart_port *port) static void ulite_shutdown(struct uart_port *port) { + struct uartlite_data *pdata = port->private_data; + uart_out32(0, ULITE_CONTROL, port); uart_in32(ULITE_CONTROL, port); /* dummy */ free_irq(port->irq, port); + clk_disable(pdata->clk); } static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, @@ -325,6 +341,7 @@ static void ulite_release_port(struct uart_port *port) static int ulite_request_port(struct uart_port *port) { + struct uartlite_data *pdata = port->private_data; int ret; pr_debug("ulite console: port=%p; port->mapbase=%llx\n", @@ -342,13 +359,13 @@ static int ulite_request_port(struct uart_port *port) return -EBUSY; } - port->private_data = (void *)&uartlite_be; + pdata->reg_ops = &uartlite_be; ret = uart_in32(ULITE_CONTROL, port); uart_out32(ULITE_CONTROL_RST_TX, ULITE_CONTROL, port); ret = uart_in32(ULITE_STATUS, port); /* Endianess detection */ if ((ret & ULITE_STATUS_TXEMPTY) != ULITE_STATUS_TXEMPTY) - port->private_data = (void *)&uartlite_le; + pdata->reg_ops = &uartlite_le; return 0; } @@ -365,6 +382,17 @@ static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser) return -EINVAL; } +static void ulite_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uartlite_data *pdata = port->private_data; + + if (!state) + clk_enable(pdata->clk); + else + clk_disable(pdata->clk); +} + #ifdef CONFIG_CONSOLE_POLL static int ulite_get_poll_char(struct uart_port *port) { @@ -400,6 +428,7 @@ static const struct uart_ops ulite_ops = { .request_port = ulite_request_port, .config_port = ulite_config_port, .verify_port = ulite_verify_port, + .pm = ulite_pm, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = ulite_get_poll_char, .poll_put_char = ulite_put_poll_char, @@ -585,10 +614,12 @@ static struct uart_driver ulite_uart_driver = { * @id: requested id number. Pass -1 for automatic port assignment * @base: base address of uartlite registers * @irq: irq number for uartlite + * @pdata: private data for uartlite * * Returns: 0 on success, <0 otherwise */ -static int ulite_assign(struct device *dev, int id, u32 base, int irq) +static int ulite_assign(struct device *dev, int id, u32 base, int irq, + struct uartlite_data *pdata) { struct uart_port *port; int rc; @@ -625,6 +656,7 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq) port->dev = dev; port->type = PORT_UNKNOWN; port->line = id; + port->private_data = pdata; dev_set_drvdata(dev, port); @@ -658,10 +690,44 @@ static int ulite_release(struct device *dev) return rc; } +/** + * ulite_suspend - Stop the device. + * + * @dev: handle to the device structure. + * Return: 0 always. + */ +static int __maybe_unused ulite_suspend(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + if (port) + uart_suspend_port(&ulite_uart_driver, port); + + return 0; +} + +/** + * ulite_resume - Resume the device. + * + * @dev: handle to the device structure. + * Return: 0 on success, errno otherwise. + */ +static int __maybe_unused ulite_resume(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + + if (port) + uart_resume_port(&ulite_uart_driver, port); + + return 0; +} + /* --------------------------------------------------------------------- * Platform bus binding */ +static SIMPLE_DEV_PM_OPS(ulite_pm_ops, ulite_suspend, ulite_resume); + #if defined(CONFIG_OF) /* Match table for of_platform binding */ static const struct of_device_id ulite_of_match[] = { @@ -675,7 +741,8 @@ MODULE_DEVICE_TABLE(of, ulite_of_match); static int ulite_probe(struct platform_device *pdev) { struct resource *res; - int irq; + struct uartlite_data *pdata; + int irq, ret; int id = pdev->id; #ifdef CONFIG_OF const __be32 *prop; @@ -684,6 +751,10 @@ static int ulite_probe(struct platform_device *pdev) if (prop) id = be32_to_cpup(prop); #endif + pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data), + GFP_KERNEL); + if (!pdata) + return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) @@ -693,11 +764,33 @@ static int ulite_probe(struct platform_device *pdev) if (irq <= 0) return -ENXIO; - return ulite_assign(&pdev->dev, id, res->start, irq); + pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); + if (IS_ERR(pdata->clk)) { + if (PTR_ERR(pdata->clk) != -ENOENT) + return PTR_ERR(pdata->clk); + + /* + * Clock framework support is optional, continue on + * anyways if we don't find a matching clock. + */ + pdata->clk = NULL; + } + + ret = clk_prepare(pdata->clk); + if (ret) { + dev_err(&pdev->dev, "Failed to prepare clock\n"); + return ret; + } + + return ulite_assign(&pdev->dev, id, res->start, irq, pdata); } static int ulite_remove(struct platform_device *pdev) { + struct uart_port *port = dev_get_drvdata(&pdev->dev); + struct uartlite_data *pdata = port->private_data; + + clk_disable_unprepare(pdata->clk); return ulite_release(&pdev->dev); } @@ -710,6 +803,7 @@ static struct platform_driver ulite_platform_driver = { .driver = { .name = "uartlite", .of_match_table = of_match_ptr(ulite_of_match), + .pm = &ulite_pm_ops, }, }; diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 8a3e34234e98..a48f19b1b88f 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -167,6 +167,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255"); #define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */ #define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */ +#define CDNS_UART_SR_TACTIVE 0x00000800 /* TX state machine active */ /* baud dividers min/max values */ #define CDNS_UART_BDIV_MIN 4 @@ -829,7 +830,7 @@ static int cdns_uart_startup(struct uart_port *port) * the receiver. */ status = readl(port->membase + CDNS_UART_CR); - status &= CDNS_UART_CR_RX_DIS; + status &= ~CDNS_UART_CR_RX_DIS; status |= CDNS_UART_CR_RX_EN; writel(status, port->membase + CDNS_UART_CR); @@ -1099,23 +1100,14 @@ static const struct uart_ops cdns_uart_ops = { #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE /** - * cdns_uart_console_wait_tx - Wait for the TX to be full - * @port: Handle to the uart port structure - */ -static void cdns_uart_console_wait_tx(struct uart_port *port) -{ - while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY)) - barrier(); -} - -/** * cdns_uart_console_putchar - write the character to the FIFO buffer * @port: Handle to the uart port structure * @ch: Character to be written */ static void cdns_uart_console_putchar(struct uart_port *port, int ch) { - cdns_uart_console_wait_tx(port); + while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL) + cpu_relax(); writel(ch, port->membase + CDNS_UART_FIFO); } @@ -1206,9 +1198,10 @@ static void cdns_uart_console_write(struct console *co, const char *s, writel(ctrl, port->membase + CDNS_UART_CR); uart_console_write(port, s, count, cdns_uart_console_putchar); - cdns_uart_console_wait_tx(port); - - writel(ctrl, port->membase + CDNS_UART_CR); + while ((readl(port->membase + CDNS_UART_SR) & + (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE)) != + CDNS_UART_SR_TXEMPTY) + cpu_relax(); /* restore interrupt state */ writel(imr, port->membase + CDNS_UART_IER); diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 6364890575ec..06ed20dd01ba 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -348,7 +348,7 @@ static void send_sig_all(int sig) if (is_global_init(p)) continue; - do_send_sig_info(sig, SEND_SIG_FORCED, p, true); + do_send_sig_info(sig, SEND_SIG_FORCED, p, PIDTYPE_MAX); } read_unlock(&tasklist_lock); } diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c index e30aa6bf9ff9..50f567b6a66e 100644 --- a/drivers/tty/tty_audit.c +++ b/drivers/tty/tty_audit.c @@ -92,7 +92,7 @@ static void tty_audit_buf_push(struct tty_audit_buf *buf) { if (buf->valid == 0) return; - if (audit_enabled == 0) { + if (audit_enabled == AUDIT_OFF) { buf->valid = 0; return; } diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c index 6ff8cdfc9d2a..7576ceace571 100644 --- a/drivers/tty/tty_baudrate.c +++ b/drivers/tty/tty_baudrate.c @@ -100,11 +100,11 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios) if (cbaud == B0) return tty_termios_baud_rate(termios); - +#ifdef BOTHER /* Magic token for arbitrary speed via c_ispeed*/ if (cbaud == BOTHER) return termios->c_ispeed; - +#endif if (cbaud & CBAUDEX) { cbaud &= ~CBAUDEX; @@ -114,9 +114,9 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios) cbaud += 15; } return baud_table[cbaud]; -#else +#else /* IBSHIFT */ return tty_termios_baud_rate(termios); -#endif +#endif /* IBSHIFT */ } EXPORT_SYMBOL(tty_termios_input_baud_rate); @@ -156,19 +156,27 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, termios->c_ispeed = ibaud; termios->c_ospeed = obaud; +#ifdef IBSHIFT + if ((termios->c_cflag >> IBSHIFT) & CBAUD) + ibinput = 1; /* An input speed was specified */ +#endif #ifdef BOTHER /* If the user asked for a precise weird speed give a precise weird answer. If they asked for a Bfoo speed they may have problems digesting non-exact replies so fuzz a bit */ - if ((termios->c_cflag & CBAUD) == BOTHER) + if ((termios->c_cflag & CBAUD) == BOTHER) { oclose = 0; + if (!ibinput) + iclose = 0; + } if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER) iclose = 0; - if ((termios->c_cflag >> IBSHIFT) & CBAUD) - ibinput = 1; /* An input speed was specified */ #endif termios->c_cflag &= ~CBAUD; +#ifdef IBSHIFT + termios->c_cflag &= ~(CBAUD << IBSHIFT); +#endif /* * Our goal is to find a close match to the standard baud rate diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index aba59521ad48..32bc3e3fe4d3 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -814,9 +814,9 @@ void start_tty(struct tty_struct *tty) } EXPORT_SYMBOL(start_tty); -static void tty_update_time(struct timespec *time) +static void tty_update_time(struct timespec64 *time) { - unsigned long sec = get_seconds(); + time64_t sec = ktime_get_real_seconds(); /* * We only care if the two values differ in anything other than the @@ -867,13 +867,8 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count, i = -EIO; tty_ldisc_deref(ld); - if (i > 0) { - struct timespec ts; - - ts = timespec64_to_timespec(inode->i_atime); - tty_update_time(&ts); - inode->i_atime = timespec_to_timespec64(ts); - } + if (i > 0) + tty_update_time(&inode->i_atime); return i; } @@ -974,11 +969,7 @@ static inline ssize_t do_tty_write( cond_resched(); } if (written) { - struct timespec ts; - - ts = timespec64_to_timespec(file_inode(file)->i_mtime); - tty_update_time(&ts); - file_inode(file)->i_mtime = timespec_to_timespec64(ts); + tty_update_time(&file_inode(file)->i_mtime); ret = written; } out: @@ -2122,7 +2113,7 @@ static int __tty_fasync(int fd, struct file *filp, int on) type = PIDTYPE_PGID; } else { pid = task_pid(current); - type = PIDTYPE_PID; + type = PIDTYPE_TGID; } get_pid(pid); spin_unlock_irqrestore(&tty->ctrl_lock, flags); diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c index 37a91b3df980..0c98d88f795a 100644 --- a/drivers/tty/tty_ldsem.c +++ b/drivers/tty/tty_ldsem.c @@ -74,28 +74,6 @@ struct ldsem_waiter { struct task_struct *task; }; -static inline long ldsem_atomic_update(long delta, struct ld_semaphore *sem) -{ - return atomic_long_add_return(delta, (atomic_long_t *)&sem->count); -} - -/* - * ldsem_cmpxchg() updates @*old with the last-known sem->count value. - * Returns 1 if count was successfully changed; @*old will have @new value. - * Returns 0 if count was not changed; @*old will have most recent sem->count - */ -static inline int ldsem_cmpxchg(long *old, long new, struct ld_semaphore *sem) -{ - long tmp = atomic_long_cmpxchg(&sem->count, *old, new); - if (tmp == *old) { - *old = new; - return 1; - } else { - *old = tmp; - return 0; - } -} - /* * Initialize an ldsem: */ @@ -109,7 +87,7 @@ void __init_ldsem(struct ld_semaphore *sem, const char *name, debug_check_no_locks_freed((void *)sem, sizeof(*sem)); lockdep_init_map(&sem->dep_map, name, key, 0); #endif - sem->count = LDSEM_UNLOCKED; + atomic_long_set(&sem->count, LDSEM_UNLOCKED); sem->wait_readers = 0; raw_spin_lock_init(&sem->wait_lock); INIT_LIST_HEAD(&sem->read_wait); @@ -122,16 +100,17 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem) struct task_struct *tsk; long adjust, count; - /* Try to grant read locks to all readers on the read wait list. + /* + * Try to grant read locks to all readers on the read wait list. * Note the 'active part' of the count is incremented by * the number of readers before waking any processes up. */ adjust = sem->wait_readers * (LDSEM_ACTIVE_BIAS - LDSEM_WAIT_BIAS); - count = ldsem_atomic_update(adjust, sem); + count = atomic_long_add_return(adjust, &sem->count); do { if (count > 0) break; - if (ldsem_cmpxchg(&count, count - adjust, sem)) + if (atomic_long_try_cmpxchg(&sem->count, &count, count - adjust)) return; } while (1); @@ -148,14 +127,15 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem) static inline int writer_trylock(struct ld_semaphore *sem) { - /* only wake this writer if the active part of the count can be + /* + * Only wake this writer if the active part of the count can be * transitioned from 0 -> 1 */ - long count = ldsem_atomic_update(LDSEM_ACTIVE_BIAS, sem); + long count = atomic_long_add_return(LDSEM_ACTIVE_BIAS, &sem->count); do { if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS) return 1; - if (ldsem_cmpxchg(&count, count - LDSEM_ACTIVE_BIAS, sem)) + if (atomic_long_try_cmpxchg(&sem->count, &count, count - LDSEM_ACTIVE_BIAS)) return 0; } while (1); } @@ -205,12 +185,16 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout) /* set up my own style of waitqueue */ raw_spin_lock_irq(&sem->wait_lock); - /* Try to reverse the lock attempt but if the count has changed + /* + * Try to reverse the lock attempt but if the count has changed * so that reversing fails, check if there are are no waiters, - * and early-out if not */ + * and early-out if not + */ do { - if (ldsem_cmpxchg(&count, count + adjust, sem)) + if (atomic_long_try_cmpxchg(&sem->count, &count, count + adjust)) { + count += adjust; break; + } if (count > 0) { raw_spin_unlock_irq(&sem->wait_lock); return sem; @@ -243,12 +227,14 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout) __set_current_state(TASK_RUNNING); if (!timeout) { - /* lock timed out but check if this task was just + /* + * Lock timed out but check if this task was just * granted lock ownership - if so, pretend there - * was no timeout; otherwise, cleanup lock wait */ + * was no timeout; otherwise, cleanup lock wait. + */ raw_spin_lock_irq(&sem->wait_lock); if (waiter.task) { - ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem); + atomic_long_add_return(-LDSEM_WAIT_BIAS, &sem->count); list_del(&waiter.list); raw_spin_unlock_irq(&sem->wait_lock); put_task_struct(waiter.task); @@ -273,11 +259,13 @@ down_write_failed(struct ld_semaphore *sem, long count, long timeout) /* set up my own style of waitqueue */ raw_spin_lock_irq(&sem->wait_lock); - /* Try to reverse the lock attempt but if the count has changed + /* + * Try to reverse the lock attempt but if the count has changed * so that reversing fails, check if the lock is now owned, - * and early-out if so */ + * and early-out if so. + */ do { - if (ldsem_cmpxchg(&count, count + adjust, sem)) + if (atomic_long_try_cmpxchg(&sem->count, &count, count + adjust)) break; if ((count & LDSEM_ACTIVE_MASK) == LDSEM_ACTIVE_BIAS) { raw_spin_unlock_irq(&sem->wait_lock); @@ -303,7 +291,7 @@ down_write_failed(struct ld_semaphore *sem, long count, long timeout) } if (!locked) - ldsem_atomic_update(-LDSEM_WAIT_BIAS, sem); + atomic_long_add_return(-LDSEM_WAIT_BIAS, &sem->count); list_del(&waiter.list); raw_spin_unlock_irq(&sem->wait_lock); @@ -324,7 +312,7 @@ static int __ldsem_down_read_nested(struct ld_semaphore *sem, lockdep_acquire_read(sem, subclass, 0, _RET_IP_); - count = ldsem_atomic_update(LDSEM_READ_BIAS, sem); + count = atomic_long_add_return(LDSEM_READ_BIAS, &sem->count); if (count <= 0) { lock_stat(sem, contended); if (!down_read_failed(sem, count, timeout)) { @@ -343,7 +331,7 @@ static int __ldsem_down_write_nested(struct ld_semaphore *sem, lockdep_acquire(sem, subclass, 0, _RET_IP_); - count = ldsem_atomic_update(LDSEM_WRITE_BIAS, sem); + count = atomic_long_add_return(LDSEM_WRITE_BIAS, &sem->count); if ((count & LDSEM_ACTIVE_MASK) != LDSEM_ACTIVE_BIAS) { lock_stat(sem, contended); if (!down_write_failed(sem, count, timeout)) { @@ -370,10 +358,10 @@ int __sched ldsem_down_read(struct ld_semaphore *sem, long timeout) */ int ldsem_down_read_trylock(struct ld_semaphore *sem) { - long count = sem->count; + long count = atomic_long_read(&sem->count); while (count >= 0) { - if (ldsem_cmpxchg(&count, count + LDSEM_READ_BIAS, sem)) { + if (atomic_long_try_cmpxchg(&sem->count, &count, count + LDSEM_READ_BIAS)) { lockdep_acquire_read(sem, 0, 1, _RET_IP_); lock_stat(sem, acquired); return 1; @@ -396,10 +384,10 @@ int __sched ldsem_down_write(struct ld_semaphore *sem, long timeout) */ int ldsem_down_write_trylock(struct ld_semaphore *sem) { - long count = sem->count; + long count = atomic_long_read(&sem->count); while ((count & LDSEM_ACTIVE_MASK) == 0) { - if (ldsem_cmpxchg(&count, count + LDSEM_WRITE_BIAS, sem)) { + if (atomic_long_try_cmpxchg(&sem->count, &count, count + LDSEM_WRITE_BIAS)) { lockdep_acquire(sem, 0, 1, _RET_IP_); lock_stat(sem, acquired); return 1; @@ -417,7 +405,7 @@ void ldsem_up_read(struct ld_semaphore *sem) lockdep_release(sem, 1, _RET_IP_); - count = ldsem_atomic_update(-LDSEM_READ_BIAS, sem); + count = atomic_long_add_return(-LDSEM_READ_BIAS, &sem->count); if (count < 0 && (count & LDSEM_ACTIVE_MASK) == 0) ldsem_wake(sem); } @@ -431,7 +419,7 @@ void ldsem_up_write(struct ld_semaphore *sem) lockdep_release(sem, 1, _RET_IP_); - count = ldsem_atomic_update(-LDSEM_WRITE_BIAS, sem); + count = atomic_long_add_return(-LDSEM_WRITE_BIAS, &sem->count); if (count < 0) ldsem_wake(sem); } diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index d5b4a2b44ab8..88312c6c92cc 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -690,7 +690,35 @@ static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag) */ static void k_dead(struct vc_data *vc, unsigned char value, char up_flag) { - static const unsigned char ret_diacr[NR_DEAD] = {'`', '\'', '^', '~', '"', ',' }; + static const unsigned char ret_diacr[NR_DEAD] = { + '`', /* dead_grave */ + '\'', /* dead_acute */ + '^', /* dead_circumflex */ + '~', /* dead_tilda */ + '"', /* dead_diaeresis */ + ',', /* dead_cedilla */ + '_', /* dead_macron */ + 'U', /* dead_breve */ + '.', /* dead_abovedot */ + '*', /* dead_abovering */ + '=', /* dead_doubleacute */ + 'c', /* dead_caron */ + 'k', /* dead_ogonek */ + 'i', /* dead_iota */ + '#', /* dead_voiced_sound */ + 'o', /* dead_semivoiced_sound */ + '!', /* dead_belowdot */ + '?', /* dead_hook */ + '+', /* dead_horn */ + '-', /* dead_stroke */ + ')', /* dead_abovecomma */ + '(', /* dead_abovereversedcomma */ + ':', /* dead_doublegrave */ + 'n', /* dead_invertedbreve */ + ';', /* dead_belowcomma */ + '$', /* dead_currency */ + '@', /* dead_greek */ + }; k_deadunicode(vc, ret_diacr[value], up_flag); } @@ -959,7 +987,7 @@ struct kbd_led_trigger { unsigned int mask; }; -static void kbd_led_trigger_activate(struct led_classdev *cdev) +static int kbd_led_trigger_activate(struct led_classdev *cdev) { struct kbd_led_trigger *trigger = container_of(cdev->trigger, struct kbd_led_trigger, trigger); @@ -970,6 +998,8 @@ static void kbd_led_trigger_activate(struct led_classdev *cdev) ledstate & trigger->mask ? LED_FULL : LED_OFF); tasklet_enable(&keyboard_tasklet); + + return 0; } #define KBD_LED_TRIGGER(_led_bit, _name) { \ diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 90ea1cc52b7a..07496c711d7d 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -57,11 +57,13 @@ static inline void highlight_pointer(const int where) complement_pos(sel_cons, where); } -static u16 +static u32 sel_pos(int n) { + if (use_unicode) + return screen_glyph_unicode(sel_cons, n / 2); return inverse_translate(sel_cons, screen_glyph(sel_cons, n), - use_unicode); + 0); } /** @@ -90,7 +92,8 @@ static u32 inwordLut[]={ 0x07FFFFFE, /* lowercase */ }; -static inline int inword(const u16 c) { +static inline int inword(const u32 c) +{ return c > 0x7f || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1); } @@ -116,14 +119,8 @@ static inline int atedge(const int p, int size_row) return (!(p % size_row) || !((p + 2) % size_row)); } -/* constrain v such that v <= u */ -static inline unsigned short limit(const unsigned short v, const unsigned short u) -{ - return (v > u) ? u : v; -} - -/* stores the char in UTF8 and returns the number of bytes used (1-3) */ -static int store_utf8(u16 c, char *p) +/* stores the char in UTF8 and returns the number of bytes used (1-4) */ +static int store_utf8(u32 c, char *p) { if (c < 0x80) { /* 0******* */ @@ -134,13 +131,26 @@ static int store_utf8(u16 c, char *p) p[0] = 0xc0 | (c >> 6); p[1] = 0x80 | (c & 0x3f); return 2; - } else { + } else if (c < 0x10000) { /* 1110**** 10****** 10****** */ p[0] = 0xe0 | (c >> 12); p[1] = 0x80 | ((c >> 6) & 0x3f); p[2] = 0x80 | (c & 0x3f); return 3; - } + } else if (c < 0x110000) { + /* 11110*** 10****** 10****** 10****** */ + p[0] = 0xf0 | (c >> 18); + p[1] = 0x80 | ((c >> 12) & 0x3f); + p[2] = 0x80 | ((c >> 6) & 0x3f); + p[3] = 0x80 | (c & 0x3f); + return 4; + } else { + /* outside Unicode, replace with U+FFFD */ + p[0] = 0xef; + p[1] = 0xbf; + p[2] = 0xbd; + return 3; + } } /** @@ -160,17 +170,17 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t struct tiocl_selection v; char *bp, *obp; int i, ps, pe, multiplier; - u16 c; + u32 c; int mode; poke_blanked_console(); if (copy_from_user(&v, sel, sizeof(*sel))) return -EFAULT; - v.xs = limit(v.xs - 1, vc->vc_cols - 1); - v.ys = limit(v.ys - 1, vc->vc_rows - 1); - v.xe = limit(v.xe - 1, vc->vc_cols - 1); - v.ye = limit(v.ye - 1, vc->vc_rows - 1); + v.xs = min_t(u16, v.xs - 1, vc->vc_cols - 1); + v.ys = min_t(u16, v.ys - 1, vc->vc_rows - 1); + v.xe = min_t(u16, v.xe - 1, vc->vc_cols - 1); + v.ye = min_t(u16, v.ye - 1, vc->vc_rows - 1); ps = v.ys * vc->vc_size_row + (v.xs << 1); pe = v.ye * vc->vc_size_row + (v.xe << 1); @@ -279,7 +289,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t sel_end = new_sel_end; /* Allocate a new buffer before freeing the old one ... */ - multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */ + multiplier = use_unicode ? 4 : 1; /* chars can take up to 4 bytes */ bp = kmalloc_array((sel_end - sel_start) / 2 + 1, multiplier, GFP_KERNEL); if (!bp) { diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index e4a66e1fd05f..2384ea85ffaf 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -10,6 +10,12 @@ * Attribute/character pair is in native endianity. * [minor: N+128] * + * /dev/vcsuN: similar to /dev/vcsaN but using 4-byte unicode values + * instead of 1-byte screen glyph values. + * [minor: N+64] + * + * /dev/vcsuaN: same idea as /dev/vcsaN for unicode (not yet implemented). + * * This replaces screendump and part of selection, so that the system * administrator can control access using file system permissions. * @@ -51,6 +57,26 @@ #define CON_BUF_SIZE (CONFIG_BASE_SMALL ? 256 : PAGE_SIZE) +/* + * Our minor space: + * + * 0 ... 63 glyph mode without attributes + * 64 ... 127 unicode mode without attributes + * 128 ... 191 glyph mode with attributes + * 192 ... 255 unused (reserved for unicode with attributes) + * + * This relies on MAX_NR_CONSOLES being <= 63, meaning 63 actual consoles + * with minors 0, 64, 128 and 192 being proxies for the foreground console. + */ +#if MAX_NR_CONSOLES > 63 +#warning "/dev/vcs* devices may not accommodate more than 63 consoles" +#endif + +#define console(inode) (iminor(inode) & 63) +#define use_unicode(inode) (iminor(inode) & 64) +#define use_attributes(inode) (iminor(inode) & 128) + + struct vcs_poll_data { struct notifier_block notifier; unsigned int cons_num; @@ -102,7 +128,7 @@ vcs_poll_data_get(struct file *file) poll = kzalloc(sizeof(*poll), GFP_KERNEL); if (!poll) return NULL; - poll->cons_num = iminor(file_inode(file)) & 127; + poll->cons_num = console(file_inode(file)); init_waitqueue_head(&poll->waitq); poll->notifier.notifier_call = vcs_notifier; if (register_vt_notifier(&poll->notifier) != 0) { @@ -140,7 +166,7 @@ vcs_poll_data_get(struct file *file) static struct vc_data* vcs_vc(struct inode *inode, int *viewed) { - unsigned int currcons = iminor(inode) & 127; + unsigned int currcons = console(inode); WARN_CONSOLE_UNLOCKED(); @@ -164,7 +190,6 @@ static int vcs_size(struct inode *inode) { int size; - int minor = iminor(inode); struct vc_data *vc; WARN_CONSOLE_UNLOCKED(); @@ -175,8 +200,12 @@ vcs_size(struct inode *inode) size = vc->vc_rows * vc->vc_cols; - if (minor & 128) + if (use_attributes(inode)) { + if (use_unicode(inode)) + return -EOPNOTSUPP; size = 2*size + HEADER_SIZE; + } else if (use_unicode(inode)) + size *= 4; return size; } @@ -197,12 +226,10 @@ static ssize_t vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct inode *inode = file_inode(file); - unsigned int currcons = iminor(inode); struct vc_data *vc; struct vcs_poll_data *poll; - long pos; - long attr, read; - int col, maxcol, viewed; + long pos, read; + int attr, uni_mode, row, col, maxcol, viewed; unsigned short *org = NULL; ssize_t ret; char *con_buf; @@ -218,7 +245,8 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) */ console_lock(); - attr = (currcons & 128); + uni_mode = use_unicode(inode); + attr = use_attributes(inode); ret = -ENXIO; vc = vcs_vc(inode, &viewed); if (!vc) @@ -227,6 +255,10 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) ret = -EINVAL; if (pos < 0) goto unlock_out; + /* we enforce 32-bit alignment for pos and count in unicode mode */ + if (uni_mode && (pos | count) & 3) + goto unlock_out; + poll = file->private_data; if (count && poll) poll->seen_last_update = true; @@ -266,7 +298,28 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) con_buf_start = con_buf0 = con_buf; orig_count = this_round; maxcol = vc->vc_cols; - if (!attr) { + if (uni_mode) { + unsigned int nr; + + ret = vc_uniscr_check(vc); + if (ret) + break; + p /= 4; + row = p / vc->vc_cols; + col = p % maxcol; + nr = maxcol - col; + do { + if (nr > this_round/4) + nr = this_round/4; + vc_uniscr_copy_line(vc, con_buf0, viewed, + row, col, nr); + con_buf0 += nr * 4; + this_round -= nr * 4; + row++; + col = 0; + nr = maxcol; + } while (this_round); + } else if (!attr) { org = screen_pos(vc, p, viewed); col = p % maxcol; p += maxcol - col; @@ -375,7 +428,6 @@ static ssize_t vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { struct inode *inode = file_inode(file); - unsigned int currcons = iminor(inode); struct vc_data *vc; long pos; long attr, size, written; @@ -396,7 +448,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) */ console_lock(); - attr = (currcons & 128); + attr = use_attributes(inode); ret = -ENXIO; vc = vcs_vc(inode, &viewed); if (!vc) @@ -593,9 +645,15 @@ vcs_fasync(int fd, struct file *file, int on) static int vcs_open(struct inode *inode, struct file *filp) { - unsigned int currcons = iminor(inode) & 127; + unsigned int currcons = console(inode); + bool attr = use_attributes(inode); + bool uni_mode = use_unicode(inode); int ret = 0; - + + /* we currently don't support attributes in unicode mode */ + if (attr && uni_mode) + return -EOPNOTSUPP; + console_lock(); if(currcons && !vc_cons_allocated(currcons-1)) ret = -ENXIO; @@ -628,6 +686,8 @@ void vcs_make_sysfs(int index) { device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 1), NULL, "vcs%u", index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 65), NULL, + "vcsu%u", index + 1); device_create(vc_class, NULL, MKDEV(VCS_MAJOR, index + 129), NULL, "vcsa%u", index + 1); } @@ -635,6 +695,7 @@ void vcs_make_sysfs(int index) void vcs_remove_sysfs(int index) { device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 1)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 65)); device_destroy(vc_class, MKDEV(VCS_MAJOR, index + 129)); } @@ -647,6 +708,7 @@ int __init vcs_init(void) vc_class = class_create(THIS_MODULE, "vc"); device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 64), NULL, "vcsu"); device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); for (i = 0; i < MIN_NR_CONSOLES; i++) vcs_make_sysfs(i); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 15eb6c829d39..5f1183b0b89d 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -104,6 +104,7 @@ #include <linux/kdb.h> #include <linux/ctype.h> #include <linux/bsearch.h> +#include <linux/gcd.h> #define MAX_NR_CON_DRIVER 16 @@ -317,6 +318,306 @@ void schedule_console_callback(void) schedule_work(&console_work); } +/* + * Code to manage unicode-based screen buffers + */ + +#ifdef NO_VC_UNI_SCREEN +/* this disables and optimizes related code away at compile time */ +#define get_vc_uniscr(vc) NULL +#else +#define get_vc_uniscr(vc) vc->vc_uni_screen +#endif + +#define VC_UNI_SCREEN_DEBUG 0 + +typedef uint32_t char32_t; + +/* + * Our screen buffer is preceded by an array of line pointers so that + * scrolling only implies some pointer shuffling. + */ +struct uni_screen { + char32_t *lines[0]; +}; + +static struct uni_screen *vc_uniscr_alloc(unsigned int cols, unsigned int rows) +{ + struct uni_screen *uniscr; + void *p; + unsigned int memsize, i; + + /* allocate everything in one go */ + memsize = cols * rows * sizeof(char32_t); + memsize += rows * sizeof(char32_t *); + p = kmalloc(memsize, GFP_KERNEL); + if (!p) + return NULL; + + /* initial line pointers */ + uniscr = p; + p = uniscr->lines + rows; + for (i = 0; i < rows; i++) { + uniscr->lines[i] = p; + p += cols * sizeof(char32_t); + } + return uniscr; +} + +static void vc_uniscr_set(struct vc_data *vc, struct uni_screen *new_uniscr) +{ + kfree(vc->vc_uni_screen); + vc->vc_uni_screen = new_uniscr; +} + +static void vc_uniscr_putc(struct vc_data *vc, char32_t uc) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) + uniscr->lines[vc->vc_y][vc->vc_x] = uc; +} + +static void vc_uniscr_insert(struct vc_data *vc, unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + char32_t *ln = uniscr->lines[vc->vc_y]; + unsigned int x = vc->vc_x, cols = vc->vc_cols; + + memmove(&ln[x + nr], &ln[x], (cols - x - nr) * sizeof(*ln)); + memset32(&ln[x], ' ', nr); + } +} + +static void vc_uniscr_delete(struct vc_data *vc, unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + char32_t *ln = uniscr->lines[vc->vc_y]; + unsigned int x = vc->vc_x, cols = vc->vc_cols; + + memcpy(&ln[x], &ln[x + nr], (cols - x - nr) * sizeof(*ln)); + memset32(&ln[cols - nr], ' ', nr); + } +} + +static void vc_uniscr_clear_line(struct vc_data *vc, unsigned int x, + unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + char32_t *ln = uniscr->lines[vc->vc_y]; + + memset32(&ln[x], ' ', nr); + } +} + +static void vc_uniscr_clear_lines(struct vc_data *vc, unsigned int y, + unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + unsigned int cols = vc->vc_cols; + + while (nr--) + memset32(uniscr->lines[y++], ' ', cols); + } +} + +static void vc_uniscr_scroll(struct vc_data *vc, unsigned int t, unsigned int b, + enum con_scroll dir, unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) { + unsigned int i, j, k, sz, d, clear; + + sz = b - t; + clear = b - nr; + d = nr; + if (dir == SM_DOWN) { + clear = t; + d = sz - nr; + } + for (i = 0; i < gcd(d, sz); i++) { + char32_t *tmp = uniscr->lines[t + i]; + j = i; + while (1) { + k = j + d; + if (k >= sz) + k -= sz; + if (k == i) + break; + uniscr->lines[t + j] = uniscr->lines[t + k]; + j = k; + } + uniscr->lines[t + j] = tmp; + } + vc_uniscr_clear_lines(vc, clear, nr); + } +} + +static void vc_uniscr_copy_area(struct uni_screen *dst, + unsigned int dst_cols, + unsigned int dst_rows, + struct uni_screen *src, + unsigned int src_cols, + unsigned int src_top_row, + unsigned int src_bot_row) +{ + unsigned int dst_row = 0; + + if (!dst) + return; + + while (src_top_row < src_bot_row) { + char32_t *src_line = src->lines[src_top_row]; + char32_t *dst_line = dst->lines[dst_row]; + + memcpy(dst_line, src_line, src_cols * sizeof(char32_t)); + if (dst_cols - src_cols) + memset32(dst_line + src_cols, ' ', dst_cols - src_cols); + src_top_row++; + dst_row++; + } + while (dst_row < dst_rows) { + char32_t *dst_line = dst->lines[dst_row]; + + memset32(dst_line, ' ', dst_cols); + dst_row++; + } +} + +/* + * Called from vcs_read() to make sure unicode screen retrieval is possible. + * This will initialize the unicode screen buffer if not already done. + * This returns 0 if OK, or a negative error code otherwise. + * In particular, -ENODATA is returned if the console is not in UTF-8 mode. + */ +int vc_uniscr_check(struct vc_data *vc) +{ + struct uni_screen *uniscr; + unsigned short *p; + int x, y, mask; + + if (__is_defined(NO_VC_UNI_SCREEN)) + return -EOPNOTSUPP; + + WARN_CONSOLE_UNLOCKED(); + + if (!vc->vc_utf) + return -ENODATA; + + if (vc->vc_uni_screen) + return 0; + + uniscr = vc_uniscr_alloc(vc->vc_cols, vc->vc_rows); + if (!uniscr) + return -ENOMEM; + + /* + * Let's populate it initially with (imperfect) reverse translation. + * This is the next best thing we can do short of having it enabled + * from the start even when no users rely on this functionality. True + * unicode content will be available after a complete screen refresh. + */ + p = (unsigned short *)vc->vc_origin; + mask = vc->vc_hi_font_mask | 0xff; + for (y = 0; y < vc->vc_rows; y++) { + char32_t *line = uniscr->lines[y]; + for (x = 0; x < vc->vc_cols; x++) { + u16 glyph = scr_readw(p++) & mask; + line[x] = inverse_translate(vc, glyph, true); + } + } + + vc->vc_uni_screen = uniscr; + return 0; +} + +/* + * Called from vcs_read() to get the unicode data from the screen. + * This must be preceded by a successful call to vc_uniscr_check() once + * the console lock has been taken. + */ +void vc_uniscr_copy_line(struct vc_data *vc, void *dest, int viewed, + unsigned int row, unsigned int col, unsigned int nr) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + int offset = row * vc->vc_size_row + col * 2; + unsigned long pos; + + BUG_ON(!uniscr); + + pos = (unsigned long)screenpos(vc, offset, viewed); + if (pos >= vc->vc_origin && pos < vc->vc_scr_end) { + /* + * Desired position falls in the main screen buffer. + * However the actual row/col might be different if + * scrollback is active. + */ + row = (pos - vc->vc_origin) / vc->vc_size_row; + col = ((pos - vc->vc_origin) % vc->vc_size_row) / 2; + memcpy(dest, &uniscr->lines[row][col], nr * sizeof(char32_t)); + } else { + /* + * Scrollback is active. For now let's simply backtranslate + * the screen glyphs until the unicode screen buffer does + * synchronize with console display drivers for a scrollback + * buffer of its own. + */ + u16 *p = (u16 *)pos; + int mask = vc->vc_hi_font_mask | 0xff; + char32_t *uni_buf = dest; + while (nr--) { + u16 glyph = scr_readw(p++) & mask; + *uni_buf++ = inverse_translate(vc, glyph, true); + } + } +} + +/* this is for validation and debugging only */ +static void vc_uniscr_debug_check(struct vc_data *vc) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + unsigned short *p; + int x, y, mask; + + if (!VC_UNI_SCREEN_DEBUG || !uniscr) + return; + + WARN_CONSOLE_UNLOCKED(); + + /* + * Make sure our unicode screen translates into the same glyphs + * as the actual screen. This is brutal indeed. + */ + p = (unsigned short *)vc->vc_origin; + mask = vc->vc_hi_font_mask | 0xff; + for (y = 0; y < vc->vc_rows; y++) { + char32_t *line = uniscr->lines[y]; + for (x = 0; x < vc->vc_cols; x++) { + u16 glyph = scr_readw(p++) & mask; + char32_t uc = line[x]; + int tc = conv_uni_to_pc(vc, uc); + if (tc == -4) + tc = conv_uni_to_pc(vc, 0xfffd); + if (tc == -4) + tc = conv_uni_to_pc(vc, '?'); + if (tc != glyph) + pr_err_ratelimited( + "%s: mismatch at %d,%d: glyph=%#x tc=%#x\n", + __func__, x, y, glyph, tc); + } + } +} + + static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b, enum con_scroll dir, unsigned int nr) { @@ -326,6 +627,7 @@ static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b, nr = b - t - 1; if (b > vc->vc_rows || t >= b || nr < 1) return; + vc_uniscr_scroll(vc, t, b, dir, nr); if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, dir, nr)) return; @@ -533,6 +835,7 @@ static void insert_char(struct vc_data *vc, unsigned int nr) { unsigned short *p = (unsigned short *) vc->vc_pos; + vc_uniscr_insert(vc, nr); scr_memmovew(p + nr, p, (vc->vc_cols - vc->vc_x - nr) * 2); scr_memsetw(p, vc->vc_video_erase_char, nr * 2); vc->vc_need_wrap = 0; @@ -545,6 +848,7 @@ static void delete_char(struct vc_data *vc, unsigned int nr) { unsigned short *p = (unsigned short *) vc->vc_pos; + vc_uniscr_delete(vc, nr); scr_memcpyw(p, p + nr, (vc->vc_cols - vc->vc_x - nr) * 2); scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char, nr * 2); @@ -845,10 +1149,11 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, { unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; unsigned long end; - unsigned int old_rows, old_row_size; + unsigned int old_rows, old_row_size, first_copied_row; unsigned int new_cols, new_rows, new_row_size, new_screen_size; unsigned int user; unsigned short *newscreen; + struct uni_screen *new_uniscr = NULL; WARN_CONSOLE_UNLOCKED(); @@ -875,6 +1180,14 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, if (!newscreen) return -ENOMEM; + if (get_vc_uniscr(vc)) { + new_uniscr = vc_uniscr_alloc(new_cols, new_rows); + if (!new_uniscr) { + kfree(newscreen); + return -ENOMEM; + } + } + if (vc == sel_cons) clear_selection(); @@ -884,6 +1197,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, err = resize_screen(vc, new_cols, new_rows, user); if (err) { kfree(newscreen); + kfree(new_uniscr); return err; } @@ -904,18 +1218,24 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, * Cursor near the bottom, copy contents from the * bottom of buffer */ - old_origin += (old_rows - new_rows) * old_row_size; + first_copied_row = (old_rows - new_rows); } else { /* * Cursor is in no man's land, copy 1/2 screenful * from the top and bottom of cursor position */ - old_origin += (vc->vc_y - new_rows/2) * old_row_size; + first_copied_row = (vc->vc_y - new_rows/2); } - } - + old_origin += first_copied_row * old_row_size; + } else + first_copied_row = 0; end = old_origin + old_row_size * min(old_rows, new_rows); + vc_uniscr_copy_area(new_uniscr, new_cols, new_rows, + get_vc_uniscr(vc), rlth/2, first_copied_row, + min(old_rows, new_rows)); + vc_uniscr_set(vc, new_uniscr); + update_attr(vc); while (old_origin < end) { @@ -1013,6 +1333,7 @@ struct vc_data *vc_deallocate(unsigned int currcons) vc->vc_sw->con_deinit(vc); put_pid(vc->vt_pid); module_put(vc->vc_sw->owner); + vc_uniscr_set(vc, NULL); kfree(vc->vc_screenbuf); vc_cons[currcons].d = NULL; } @@ -1171,15 +1492,22 @@ static void csi_J(struct vc_data *vc, int vpar) switch (vpar) { case 0: /* erase from cursor to end of display */ + vc_uniscr_clear_line(vc, vc->vc_x, + vc->vc_cols - vc->vc_x); + vc_uniscr_clear_lines(vc, vc->vc_y + 1, + vc->vc_rows - vc->vc_y - 1); count = (vc->vc_scr_end - vc->vc_pos) >> 1; start = (unsigned short *)vc->vc_pos; break; case 1: /* erase from start to cursor */ + vc_uniscr_clear_line(vc, 0, vc->vc_x + 1); + vc_uniscr_clear_lines(vc, 0, vc->vc_y); count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1; start = (unsigned short *)vc->vc_origin; break; case 2: /* erase whole display */ case 3: /* (and scrollback buffer later) */ + vc_uniscr_clear_lines(vc, 0, vc->vc_rows); count = vc->vc_cols * vc->vc_rows; start = (unsigned short *)vc->vc_origin; break; @@ -1200,25 +1528,27 @@ static void csi_J(struct vc_data *vc, int vpar) static void csi_K(struct vc_data *vc, int vpar) { unsigned int count; - unsigned short * start; + unsigned short *start = (unsigned short *)vc->vc_pos; + int offset; switch (vpar) { case 0: /* erase from cursor to end of line */ + offset = 0; count = vc->vc_cols - vc->vc_x; - start = (unsigned short *)vc->vc_pos; break; case 1: /* erase from start of line to cursor */ - start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1)); + offset = -vc->vc_x; count = vc->vc_x + 1; break; case 2: /* erase whole line */ - start = (unsigned short *)(vc->vc_pos - (vc->vc_x << 1)); + offset = -vc->vc_x; count = vc->vc_cols; break; default: return; } - scr_memsetw(start, vc->vc_video_erase_char, 2 * count); + vc_uniscr_clear_line(vc, vc->vc_x + offset, count); + scr_memsetw(start + offset, vc->vc_video_erase_char, 2 * count); vc->vc_need_wrap = 0; if (con_should_update(vc)) do_update_region(vc, (unsigned long) start, count); @@ -1232,6 +1562,7 @@ static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar posi vpar++; count = (vpar > vc->vc_cols - vc->vc_x) ? (vc->vc_cols - vc->vc_x) : vpar; + vc_uniscr_clear_line(vc, vc->vc_x, count); scr_memsetw((unsigned short *)vc->vc_pos, vc->vc_video_erase_char, 2 * count); if (con_should_update(vc)) vc->vc_sw->con_clear(vc, vc->vc_y, vc->vc_x, 1, count); @@ -2188,7 +2519,7 @@ static void con_flush(struct vc_data *vc, unsigned long draw_from, /* acquires console_lock */ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int count) { - int c, tc, ok, n = 0, draw_x = -1; + int c, next_c, tc, ok, n = 0, draw_x = -1; unsigned int currcons; unsigned long draw_from = 0, draw_to = 0; struct vc_data *vc; @@ -2382,6 +2713,7 @@ rescan_last_byte: con_flush(vc, draw_from, draw_to, &draw_x); } + next_c = c; while (1) { if (vc->vc_need_wrap || vc->vc_decim) con_flush(vc, draw_from, draw_to, @@ -2392,6 +2724,7 @@ rescan_last_byte: } if (vc->vc_decim) insert_char(vc, 1); + vc_uniscr_putc(vc, next_c); scr_writew(himask ? ((vc_attr << 8) & ~himask) + ((tc & 0x100) ? himask : 0) + (tc & 0xff) : (vc_attr << 8) + tc, @@ -2412,6 +2745,7 @@ rescan_last_byte: tc = conv_uni_to_pc(vc, ' '); /* A space is printed in the second column */ if (tc < 0) tc = ' '; + next_c = ' '; } notify_write(vc, c); @@ -2431,6 +2765,7 @@ rescan_last_byte: do_con_trol(tty, vc, orig); } con_flush(vc, draw_from, draw_to, &draw_x); + vc_uniscr_debug_check(vc); console_conditional_schedule(); console_unlock(); notify_update(vc); @@ -4257,6 +4592,16 @@ u16 screen_glyph(struct vc_data *vc, int offset) } EXPORT_SYMBOL_GPL(screen_glyph); +u32 screen_glyph_unicode(struct vc_data *vc, int n) +{ + struct uni_screen *uniscr = get_vc_uniscr(vc); + + if (uniscr) + return uniscr->lines[n / vc->vc_cols][n % vc->vc_cols]; + return inverse_translate(vc, screen_glyph(vc, n * 2), 1); +} +EXPORT_SYMBOL_GPL(screen_glyph_unicode); + /* used by vcs - note the word offset */ unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed) { |