diff options
Diffstat (limited to 'drivers/tty')
46 files changed, 600 insertions, 303 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 95103054c0e4..fdd2860cb9bd 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -455,4 +455,27 @@ config MIPS_EJTAG_FDC_KGDB_CHAN help FDC channel number to use for KGDB. +config LDISC_AUTOLOAD + bool "Automatically load TTY Line Disciplines" + default y + help + Historically the kernel has always automatically loaded any + line discipline that is in a kernel module when a user asks + for it to be loaded with the TIOCSETD ioctl, or through other + means. This is not always the best thing to do on systems + where you know you will not be using some of the more + "ancient" line disciplines, so prevent the kernel from doing + this unless the request is coming from a process with the + CAP_SYS_MODULE permissions. + + Say 'Y' here if you trust your userspace users to do the right + thing, or if you have only provided the line disciplines that + you know you will be using, or if you wish to continue to use + the traditional method of on-demand loading of these modules + by any user. + + This functionality can be changed at runtime with the + dev.tty.ldisc_autoload sysctl, this configuration option will + only set the default value of this functionality. + endif # TTY diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 7ac9bcdf1e61..1ba0dc11153d 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -139,6 +139,21 @@ static int find_console_handle(void) return 1; } +static unsigned int local_ev_byte_channel_send(unsigned int handle, + unsigned int *count, + const char *p) +{ + char buffer[EV_BYTE_CHANNEL_MAX_BYTES]; + unsigned int c = *count; + + if (c < sizeof(buffer)) { + memcpy(buffer, p, c); + memset(&buffer[c], 0, sizeof(buffer) - c); + p = buffer; + } + return ev_byte_channel_send(handle, count, p); +} + /*************************** EARLY CONSOLE DRIVER ***************************/ #ifdef CONFIG_PPC_EARLY_DEBUG_EHV_BC @@ -157,7 +172,7 @@ static void byte_channel_spin_send(const char data) do { count = 1; - ret = ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE, + ret = local_ev_byte_channel_send(CONFIG_PPC_EARLY_DEBUG_EHV_BC_HANDLE, &count, &data); } while (ret == EV_EAGAIN); } @@ -224,7 +239,7 @@ static int ehv_bc_console_byte_channel_send(unsigned int handle, const char *s, while (count) { len = min_t(unsigned int, count, EV_BYTE_CHANNEL_MAX_BYTES); do { - ret = ev_byte_channel_send(handle, &len, s); + ret = local_ev_byte_channel_send(handle, &len, s); } while (ret == EV_EAGAIN); count -= len; s += len; @@ -404,7 +419,7 @@ static void ehv_bc_tx_dequeue(struct ehv_bc_data *bc) CIRC_CNT_TO_END(bc->head, bc->tail, BUF_SIZE), EV_BYTE_CHANNEL_MAX_BYTES); - ret = ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail); + ret = local_ev_byte_channel_send(bc->handle, &len, bc->buf + bc->tail); /* 'len' is valid only if the return code is 0 or EV_EAGAIN */ if (!ret || (ret == EV_EAGAIN)) diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index b05dc5086627..8bab8b00d47d 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -120,6 +120,14 @@ static int hvterm_raw_get_chars(uint32_t vtermno, char *buf, int count) return got; } +/** + * hvterm_raw_put_chars: send characters to firmware for given vterm adapter + * @vtermno: The virtual terminal number. + * @buf: The characters to send. Because of the underlying hypercall in + * hvc_put_chars(), this buffer must be at least 16 bytes long, even if + * you are sending fewer chars. + * @count: number of chars to send. + */ static int hvterm_raw_put_chars(uint32_t vtermno, const char *buf, int count) { struct hvterm_priv *pv = hvterm_privs[vtermno]; @@ -232,6 +240,7 @@ static const struct hv_ops hvterm_hvsi_ops = { static void udbg_hvc_putc(char c) { int count = -1; + unsigned char bounce_buffer[16]; if (!hvterm_privs[0]) return; @@ -242,7 +251,12 @@ static void udbg_hvc_putc(char c) do { switch(hvterm_privs[0]->proto) { case HV_PROTOCOL_RAW: - count = hvterm_raw_put_chars(0, &c, 1); + /* + * hvterm_raw_put_chars requires at least a 16-byte + * buffer, so go via the bounce buffer + */ + bounce_buffer[0] = c; + count = hvterm_raw_put_chars(0, bounce_buffer, 1); break; case HV_PROTOCOL_HVSI: count = hvterm_hvsi_put_chars(0, &c, 1); diff --git a/drivers/tty/ipwireless/hardware.c b/drivers/tty/ipwireless/hardware.c index df0204b6148f..4417f7568422 100644 --- a/drivers/tty/ipwireless/hardware.c +++ b/drivers/tty/ipwireless/hardware.c @@ -1515,6 +1515,8 @@ static void ipw_send_setup_packet(struct ipw_hardware *hw) sizeof(struct ipw_setup_get_version_query_packet), ADDR_SETUP_PROT, TL_PROTOCOLID_SETUP, TL_SETUP_SIGNO_GET_VERSION_QRY); + if (!ver_packet) + return; ver_packet->header.length = sizeof(struct tl_setup_get_version_qry); /* diff --git a/drivers/tty/ipwireless/main.c b/drivers/tty/ipwireless/main.c index 655c7948261c..2fa4f9123469 100644 --- a/drivers/tty/ipwireless/main.c +++ b/drivers/tty/ipwireless/main.c @@ -113,6 +113,10 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) ipw->common_memory = ioremap(p_dev->resource[2]->start, resource_size(p_dev->resource[2])); + if (!ipw->common_memory) { + ret = -ENOMEM; + goto exit1; + } if (!request_mem_region(p_dev->resource[2]->start, resource_size(p_dev->resource[2]), IPWIRELESS_PCCARD_NAME)) { @@ -133,6 +137,10 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) ipw->attr_memory = ioremap(p_dev->resource[3]->start, resource_size(p_dev->resource[3])); + if (!ipw->attr_memory) { + ret = -ENOMEM; + goto exit3; + } if (!request_mem_region(p_dev->resource[3]->start, resource_size(p_dev->resource[3]), IPWIRELESS_PCCARD_NAME)) { diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 8d6253903f24..0c12dec110bc 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -614,7 +614,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, } /* no data */ - if (file->f_flags & O_NONBLOCK) { + if (tty_io_nonblock(tty, file)) { ret = -EAGAIN; break; } @@ -681,7 +681,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, if (tbuf) break; - if (file->f_flags & O_NONBLOCK) { + if (tty_io_nonblock(tty, file)) { error = -EAGAIN; break; } diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c index 345111467b85..ee0e07b4a13d 100644 --- a/drivers/tty/n_r3964.c +++ b/drivers/tty/n_r3964.c @@ -1080,7 +1080,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, pMsg = remove_msg(pInfo, pClient); if (pMsg == NULL) { /* no messages available. */ - if (file->f_flags & O_NONBLOCK) { + if (tty_io_nonblock(tty, file)) { ret = -EAGAIN; goto unlock; } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 904fc9c37fde..8214b0326b3a 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1704,7 +1704,7 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, down_read(&tty->termios_rwsem); - while (1) { + do { /* * When PARMRK is set, each input char may take up to 3 chars * in the read buf; reduce the buffer space avail by 3x @@ -1746,7 +1746,7 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, fp += n; count -= n; rcvd += n; - } + } while (!test_bit(TTY_LDISC_CHANGING, &tty->flags)); tty->receive_room = room; @@ -2213,7 +2213,7 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, break; if (!timeout) break; - if (file->f_flags & O_NONBLOCK) { + if (tty_io_nonblock(tty, file)) { retval = -EAGAIN; break; } @@ -2367,7 +2367,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, } if (!nr) break; - if (file->f_flags & O_NONBLOCK) { + if (tty_io_nonblock(tty, file)) { retval = -EAGAIN; break; } diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index e8e8973939d3..447d791bde22 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -279,7 +279,7 @@ MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc1 module_param_array(pc104_4, ulong, NULL, 0); MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,..."); -static int rp_init(void); +static int __init rp_init(void); static void rp_cleanup_module(void); module_init(rp_init); diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index e10f1244409b..2fa92ec1d1cc 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -119,7 +119,7 @@ static int bcm2835aux_serial_remove(struct platform_device *pdev) { struct bcm2835aux_data *data = platform_get_drvdata(pdev); - serial8250_unregister_port(data->uart.port.line); + serial8250_unregister_port(data->line); clk_disable_unprepare(data->clk); return 0; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index e8819aa20415..c4e9eba36023 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -181,7 +181,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up) struct hlist_head *h; struct hlist_node *n; struct irq_info *i; - int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; + int ret; mutex_lock(&hash_mutex); @@ -216,9 +216,8 @@ static int serial_link_irq_chain(struct uart_8250_port *up) INIT_LIST_HEAD(&up->list); i->head = &up->list; spin_unlock_irq(&i->lock); - irq_flags |= up->port.irqflags; ret = request_irq(up->port.irq, serial8250_interrupt, - irq_flags, "serial", i); + up->port.irqflags, "serial", i); if (ret < 0) serial_do_unlink(i, up); } diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 3177264a1166..22d65a33059e 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -269,7 +269,7 @@ static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param) static bool dw8250_idma_filter(struct dma_chan *chan, void *param) { - return param == chan->device->dev->parent; + return param == chan->device->dev; } static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) @@ -311,7 +311,7 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) p->set_termios = dw8250_set_termios; } - /* Platforms with iDMA */ + /* Platforms with iDMA 64-bit */ if (platform_get_resource_byname(to_platform_device(p->dev), IORESOURCE_MEM, "lpss_priv")) { p->set_termios = dw8250_set_termios; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 5b54439a8a9b..c7a7574172fa 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1814,13 +1814,13 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial_port_in(port, UART_LSR); - if (status & (UART_LSR_DR | UART_LSR_BI) && - iir & UART_IIR_RDI) { + if (status & (UART_LSR_DR | UART_LSR_BI)) { if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); } serial8250_modem_status(up); - if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE)) + if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE) && + (up->ier & UART_IER_THRI)) serial8250_tx_chars(up); spin_unlock_irqrestore(&port->lock, flags); @@ -2199,6 +2199,10 @@ int serial8250_do_startup(struct uart_port *port) } } + /* Check if we need to have shared IRQs */ + if (port->irq && (up->port.flags & UPF_SHARE_IRQ)) + up->port.irqflags |= IRQF_SHARED; + if (port->irq) { unsigned char iir1; /* diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 2d8089fc2139..f6586a8681b9 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -811,10 +811,8 @@ __acquires(&uap->port.lock) if (!uap->using_tx_dma) return; - /* Avoid deadlock with the DMA engine callback */ - spin_unlock(&uap->port.lock); - dmaengine_terminate_all(uap->dmatx.chan); - spin_lock(&uap->port.lock); + dmaengine_terminate_async(uap->dmatx.chan); + if (uap->dmatx.queued) { dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, DMA_TO_DEVICE); diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 73137f4aac20..246f4aab7407 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -52,11 +52,6 @@ struct ar933x_uart_port { struct clk *clk; }; -static inline bool ar933x_uart_console_enabled(void) -{ - return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE); -} - static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, int offset) { @@ -294,6 +289,10 @@ static void ar933x_uart_set_termios(struct uart_port *port, ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, AR933X_UART_CS_HOST_INT_EN); + /* enable RX and TX ready overide */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); + /* reenable the UART */ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S, @@ -426,6 +425,10 @@ static int ar933x_uart_startup(struct uart_port *port) ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, AR933X_UART_CS_HOST_INT_EN); + /* enable RX and TX ready overide */ + ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, + AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE); + /* Enable RX interrupts */ up->ier = AR933X_UART_INT_RX_VALID; ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); @@ -511,6 +514,7 @@ static struct uart_ops ar933x_uart_ops = { .verify_port = ar933x_uart_verify_port, }; +#ifdef CONFIG_SERIAL_AR933X_CONSOLE static struct ar933x_uart_port * ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; @@ -607,14 +611,7 @@ static struct console ar933x_uart_console = { .index = -1, .data = &ar933x_uart_driver, }; - -static void ar933x_uart_add_console_port(struct ar933x_uart_port *up) -{ - if (!ar933x_uart_console_enabled()) - return; - - ar933x_console_ports[up->port.line] = up; -} +#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ static struct uart_driver ar933x_uart_driver = { .owner = THIS_MODULE, @@ -703,7 +700,9 @@ static int ar933x_uart_probe(struct platform_device *pdev) baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP); up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD); - ar933x_uart_add_console_port(up); +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + ar933x_console_ports[up->port.line] = up; +#endif ret = uart_add_one_port(&ar933x_uart_driver, &up->port); if (ret) @@ -752,8 +751,9 @@ static int __init ar933x_uart_init(void) { int ret; - if (ar933x_uart_console_enabled()) - ar933x_uart_driver.cons = &ar933x_uart_console; +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + ar933x_uart_driver.cons = &ar933x_uart_console; +#endif ret = uart_register_driver(&ar933x_uart_driver); if (ret) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 5a341b1c65c3..4a7eb85f7c85 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -175,6 +175,8 @@ struct atmel_uart_port { unsigned int pending_status; spinlock_t lock_suspended; + bool hd_start_rx; /* can start RX during half-duplex operation */ + int (*prepare_rx)(struct uart_port *port); int (*prepare_tx)(struct uart_port *port); void (*schedule_rx)(struct uart_port *port); @@ -241,6 +243,12 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value) #endif +static inline int atmel_uart_is_half_duplex(struct uart_port *port) +{ + return (port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX); +} + #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { @@ -492,9 +500,10 @@ static void atmel_stop_tx(struct uart_port *port) /* Disable interrupts */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); - if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) - atmel_start_rx(port); + if (atmel_uart_is_half_duplex(port)) + if (!atomic_read(&atmel_port->tasklet_shutdown)) + atmel_start_rx(port); + } /* @@ -511,8 +520,7 @@ static void atmel_start_tx(struct uart_port *port) return; if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port)) - if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) + if (atmel_uart_is_half_duplex(port)) atmel_stop_rx(port); if (atmel_use_pdc_tx(port)) @@ -809,10 +817,14 @@ static void atmel_complete_tx_dma(void *arg) */ if (!uart_circ_empty(xmit)) atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); - else if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); + else if (atmel_uart_is_half_duplex(port)) { + /* + * DMA done, re-enable TXEMPTY and signal that we can stop + * TX and start RX for RS485 + */ + atmel_port->hd_start_rx = true; + atmel_uart_writel(port, ATMEL_US_IER, + atmel_port->tx_done_mask); } spin_unlock_irqrestore(&port->lock, flags); @@ -1166,6 +1178,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port) sg_dma_len(&atmel_port->sg_rx)/2, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(port->dev, "Preparing DMA cyclic failed\n"); + goto chan_err; + } desc->callback = atmel_complete_rx_dma; desc->callback_param = port; atmel_port->desc_rx = desc; @@ -1253,9 +1269,19 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending) struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); if (pending & atmel_port->tx_done_mask) { - /* Either PDC or interrupt transmission */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); + + /* Start RX if flag was set and FIFO is empty */ + if (atmel_port->hd_start_rx) { + if (!(atmel_uart_readl(port, ATMEL_US_CSR) + & ATMEL_US_TXEMPTY)) + dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n"); + + atmel_port->hd_start_rx = false; + atmel_start_rx(port); + } + atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); } } @@ -1382,8 +1408,7 @@ static void atmel_tx_pdc(struct uart_port *port) atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); } else { - if ((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) { + if (atmel_uart_is_half_duplex(port)) { /* DMA done, stop TX, start RX for RS485 */ atmel_start_rx(port); } @@ -2176,27 +2201,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, mode |= ATMEL_US_USMODE_NORMAL; } - /* set the mode, clock divisor, parity, stop bits and data size */ - atmel_uart_writel(port, ATMEL_US_MR, mode); - - /* - * when switching the mode, set the RTS line state according to the - * new mode, otherwise keep the former state - */ - if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) { - unsigned int rts_state; - - if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { - /* let the hardware control the RTS line */ - rts_state = ATMEL_US_RTSDIS; - } else { - /* force RTS line to low level */ - rts_state = ATMEL_US_RTSEN; - } - - atmel_uart_writel(port, ATMEL_US_CR, rts_state); - } - /* * Set the baud rate: * Fractional baudrate allows to setup output frequency more @@ -2223,6 +2227,28 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, quot = cd | fp << ATMEL_US_FP_OFFSET; atmel_uart_writel(port, ATMEL_US_BRGR, quot); + + /* set the mode, clock divisor, parity, stop bits and data size */ + atmel_uart_writel(port, ATMEL_US_MR, mode); + + /* + * when switching the mode, set the RTS line state according to the + * new mode, otherwise keep the former state + */ + if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) { + unsigned int rts_state; + + if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) { + /* let the hardware control the RTS line */ + rts_state = ATMEL_US_RTSDIS; + } else { + /* force RTS line to low level */ + rts_state = ATMEL_US_RTSEN; + } + + atmel_uart_writel(port, ATMEL_US_CR, rts_state); + } + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c index 0040c29f651a..b9e137c03fe3 100644 --- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -421,7 +421,16 @@ static int cpm_uart_startup(struct uart_port *port) clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); } cpm_uart_initbd(pinfo); - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + if (IS_SMC(pinfo)) { + out_be32(&pinfo->smcup->smc_rstate, 0); + out_be32(&pinfo->smcup->smc_tstate, 0); + out_be16(&pinfo->smcup->smc_rbptr, + in_be16(&pinfo->smcup->smc_rbase)); + out_be16(&pinfo->smcup->smc_tbptr, + in_be16(&pinfo->smcup->smc_tbase)); + } else { + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + } } /* Install interrupt handler. */ retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); @@ -875,16 +884,14 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); /* - * In case SMC1 is being relocated... + * In case SMC is being relocated... */ -#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); out_be32(&up->smc_rstate, 0); out_be32(&up->smc_tstate, 0); out_be16(&up->smc_brkcr, 1); /* number of break chars */ out_be16(&up->smc_brkec, 0); -#endif /* Set up the uart parameters in the * parameter ram. @@ -898,8 +905,6 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) out_be16(&up->smc_brkec, 0); out_be16(&up->smc_brkcr, 1); - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - /* Set UART mode, 8 bit, no parity, one stop. * Enable receive and transmit. */ diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index 02ad6953b167..50ec5f1ac77f 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -545,7 +545,11 @@ static int __init digicolor_uart_init(void) if (ret) return ret; - return platform_driver_register(&digicolor_uart_platform); + ret = platform_driver_register(&digicolor_uart_platform); + if (ret) + uart_unregister_driver(&digicolor_uart); + + return ret; } module_init(digicolor_uart_init); diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 91d2ddd6ef88..180b77334fdd 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1244,6 +1244,9 @@ static int ifx_spi_spi_remove(struct spi_device *spi) struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); /* stop activity */ tasklet_kill(&ifx_dev->io_work_tasklet); + + pm_runtime_disable(&spi->dev); + /* free irq */ free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev); free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 5f7452eaa728..8de9ad8d01ca 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -573,7 +573,7 @@ static void dma_tx_work(struct work_struct *w) dev_err(dev, "DMA mapping error for TX.\n"); goto err_out; } - desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents, + desc = dmaengine_prep_slave_sg(chan, sgl, ret, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!desc) { dev_err(dev, "We cannot prepare for the TX slave dma!\n"); @@ -1981,7 +1981,7 @@ imx_console_setup(struct console *co, char *options) retval = clk_prepare(sport->clk_per); if (retval) - clk_disable_unprepare(sport->clk_ipg); + clk_unprepare(sport->clk_ipg); error_console: return retval; diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index f2b0d8cee8ef..0314e78e31ff 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -148,8 +148,10 @@ static int configure_kgdboc(void) char *cptr = config; struct console *cons; - if (!strlen(config) || isspace(config[0])) + if (!strlen(config) || isspace(config[0])) { + err = 0; goto noconfig; + } kgdboc_io_ops.is_console = 0; kgdb_tty_driver = NULL; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 8a3e92638e10..80ab672d61cc 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -494,37 +494,48 @@ static bool max310x_reg_precious(struct device *dev, unsigned int reg) static int max310x_set_baud(struct uart_port *port, int baud) { - unsigned int mode = 0, clk = port->uartclk, div = clk / baud; + unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0; - /* Check for minimal value for divider */ - if (div < 16) - div = 16; - - if (clk % baud && (div / 16) < 0x8000) { + /* + * Calculate the integer divisor first. Select a proper mode + * in case if the requested baud is too high for the pre-defined + * clocks frequency. + */ + div = port->uartclk / baud; + if (div < 8) { + /* Mode x4 */ + c = 4; + mode = MAX310X_BRGCFG_4XMODE_BIT; + } else if (div < 16) { /* Mode x2 */ + c = 8; mode = MAX310X_BRGCFG_2XMODE_BIT; - clk = port->uartclk * 2; - div = clk / baud; - - if (clk % baud && (div / 16) < 0x8000) { - /* Mode x4 */ - mode = MAX310X_BRGCFG_4XMODE_BIT; - clk = port->uartclk * 4; - div = clk / baud; - } + } else { + c = 16; } - max310x_port_write(port, MAX310X_BRGDIVMSB_REG, (div / 16) >> 8); - max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div / 16); - max310x_port_write(port, MAX310X_BRGCFG_REG, (div % 16) | mode); + /* Calculate the divisor in accordance with the fraction coefficient */ + div /= c; + F = c*baud; - return DIV_ROUND_CLOSEST(clk, div); + /* Calculate the baud rate fraction */ + if (div > 0) + frac = (16*(port->uartclk % F)) / F; + else + div = 1; + + max310x_port_write(port, MAX310X_BRGDIVMSB_REG, div >> 8); + max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div); + max310x_port_write(port, MAX310X_BRGCFG_REG, frac | mode); + + /* Return the actual baud rate we just programmed */ + return (16*port->uartclk) / (c*(16*div + frac)); } static int max310x_update_best_err(unsigned long f, long *besterr) { /* Use baudrate 115200 for calculate error */ - long err = f % (115200 * 16); + long err = f % (460800 * 16); if ((*besterr < 0) || (*besterr > err)) { *besterr = err; @@ -579,7 +590,7 @@ static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq, } /* Configure clock source */ - clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT; + clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0); /* Configure PLL */ if (pllcfg) { @@ -758,12 +769,9 @@ static void max310x_start_tx(struct uart_port *port) static unsigned int max310x_tx_empty(struct uart_port *port) { - unsigned int lvl, sts; - - lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); - sts = max310x_port_read(port, MAX310X_IRQSTS_REG); + u8 lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); - return ((sts & MAX310X_IRQ_TXEMPTY_BIT) && !lvl) ? TIOCSER_TEMT : 0; + return lvl ? 0 : TIOCSER_TEMT; } static unsigned int max310x_get_mctrl(struct uart_port *port) @@ -1323,6 +1331,8 @@ static int max310x_spi_probe(struct spi_device *spi) if (spi->dev.of_node) { const struct of_device_id *of_id = of_match_device(max310x_dt_ids, &spi->dev); + if (!of_id) + return -ENODEV; devtype = (struct max310x_devtype *)of_id->data; } else { diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 6788e7532dff..9e6d44df3fab 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -391,10 +391,14 @@ no_rx: static inline void msm_wait_for_xmitr(struct uart_port *port) { + unsigned int timeout = 500000; + while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) { if (msm_read(port, UART_ISR) & UART_ISR_TX_READY) break; udelay(1); + if (!timeout--) + break; } msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR); } @@ -868,6 +872,7 @@ static void msm_handle_tx(struct uart_port *port) struct circ_buf *xmit = &msm_port->uart.state->xmit; struct msm_dma *dma = &msm_port->tx_dma; unsigned int pio_count, dma_count, dma_min; + char buf[4] = { 0 }; void __iomem *tf; int err = 0; @@ -877,10 +882,12 @@ static void msm_handle_tx(struct uart_port *port) else tf = port->membase + UART_TF; + buf[0] = port->x_char; + if (msm_port->is_uartdm) msm_reset_dm_count(port, 1); - iowrite8_rep(tf, &port->x_char, 1); + iowrite32_rep(tf, buf, 1); port->icount.tx++; port->x_char = 0; return; @@ -981,6 +988,7 @@ static unsigned int msm_get_mctrl(struct uart_port *port) static void msm_reset(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int mr; /* reset everything */ msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); @@ -988,7 +996,10 @@ static void msm_reset(struct uart_port *port) msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); - msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + mr = msm_read(port, UART_MR1); + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); /* Disable DM modes */ if (msm_port->is_uartdm) @@ -1568,6 +1579,7 @@ static void __msm_console_write(struct uart_port *port, const char *s, int num_newlines = 0; bool replaced = false; void __iomem *tf; + int locked = 1; if (is_uartdm) tf = port->membase + UARTDM_TF; @@ -1580,7 +1592,13 @@ static void __msm_console_write(struct uart_port *port, const char *s, num_newlines++; count += num_newlines; - spin_lock(&port->lock); + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else + spin_lock(&port->lock); + if (is_uartdm) msm_reset_dm_count(port, count); @@ -1616,7 +1634,9 @@ static void __msm_console_write(struct uart_port *port, const char *s, iowrite32_rep(tf, buf, 1); i += num_chars; } - spin_unlock(&port->lock); + + if (locked) + spin_unlock(&port->lock); } static void msm_console_write(struct console *co, const char *s, diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 401c983ec5f3..a10e4aa9e18e 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -581,7 +581,7 @@ static int mvebu_uart_probe(struct platform_device *pdev) port->membase = devm_ioremap_resource(&pdev->dev, reg); if (IS_ERR(port->membase)) - return -PTR_ERR(port->membase); + return PTR_ERR(port->membase); data = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart_data), GFP_KERNEL); diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 1d9d778828ba..515bf18c8294 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1635,8 +1635,9 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s) /* * If something went wrong, rollback. + * Be careful: i may be unsigned. */ - while (err && (--i >= 0)) + while (err && (i-- > 0)) if (irq[i] >= 0) free_irq(irq[i], s); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 42caccb5e87e..30b577384a1d 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -252,6 +252,7 @@ struct eg20t_port { struct dma_chan *chan_rx; struct scatterlist *sg_tx_p; int nent; + int orig_nent; struct scatterlist sg_rx; int tx_dma_use; void *rx_buf_virt; @@ -806,9 +807,10 @@ static void pch_dma_tx_complete(void *arg) } xmit->tail &= UART_XMIT_SIZE - 1; async_tx_ack(priv->desc_tx); - dma_unmap_sg(port->dev, sg, priv->nent, DMA_TO_DEVICE); + dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE); priv->tx_dma_use = 0; priv->nent = 0; + priv->orig_nent = 0; kfree(priv->sg_tx_p); pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); } @@ -1033,6 +1035,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__); return 0; } + priv->orig_nent = num; priv->nent = nent; for (i = 0; i < nent; i++, sg++) { diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ea6b62cece88..f80a88d107d7 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -332,6 +332,7 @@ struct sc16is7xx_port { struct kthread_worker kworker; struct task_struct *kworker_task; struct kthread_work irq_work; + struct mutex efr_lock; struct sc16is7xx_one p[0]; }; @@ -503,6 +504,21 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) div /= 4; } + /* In an amazing feat of design, the Enhanced Features Register shares + * the address of the Interrupt Identification Register, and is + * switched in by writing a magic value (0xbf) to the Line Control + * Register. Any interrupt firing during this time will see the EFR + * where it expects the IIR to be, leading to "Unexpected interrupt" + * messages. + * + * Prevent this possibility by claiming a mutex while accessing the + * EFR, and claiming the same mutex from within the interrupt handler. + * This is similar to disabling the interrupt, but that doesn't work + * because the bulk of the interrupt processing is run as a workqueue + * job in thread context. + */ + mutex_lock(&s->efr_lock); + lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG); /* Open the LCR divisors for configuration */ @@ -518,6 +534,8 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud) /* Put LCR back to the normal mode */ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + mutex_unlock(&s->efr_lock); + sc16is7xx_port_update(port, SC16IS7XX_MCR_REG, SC16IS7XX_MCR_CLKSEL_BIT, prescaler); @@ -700,6 +718,8 @@ static void sc16is7xx_ist(struct kthread_work *ws) { struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work); + mutex_lock(&s->efr_lock); + while (1) { bool keep_polling = false; int i; @@ -709,6 +729,8 @@ static void sc16is7xx_ist(struct kthread_work *ws) if (!keep_polling) break; } + + mutex_unlock(&s->efr_lock); } static irqreturn_t sc16is7xx_irq(int irq, void *dev_id) @@ -903,6 +925,9 @@ static void sc16is7xx_set_termios(struct uart_port *port, if (!(termios->c_cflag & CREAD)) port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK; + /* As above, claim the mutex while accessing the EFR. */ + mutex_lock(&s->efr_lock); + sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_CONF_MODE_B); @@ -924,6 +949,8 @@ static void sc16is7xx_set_termios(struct uart_port *port, /* Update LCR register */ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr); + mutex_unlock(&s->efr_lock); + /* Get baud rate generator configuration */ baud = uart_get_baud_rate(port, termios, old, port->uartclk / 16 / 4 / 0xffff, @@ -1186,6 +1213,7 @@ static int sc16is7xx_probe(struct device *dev, s->regmap = regmap; s->devtype = devtype; dev_set_drvdata(dev, s); + mutex_init(&s->efr_lock); kthread_init_worker(&s->kworker); kthread_init_work(&s->irq_work, sc16is7xx_ist); @@ -1482,7 +1510,7 @@ static int __init sc16is7xx_init(void) ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver); if (ret < 0) { pr_err("failed to init sc16is7xx i2c --> %d\n", ret); - return ret; + goto err_i2c; } #endif @@ -1490,10 +1518,18 @@ static int __init sc16is7xx_init(void) ret = spi_register_driver(&sc16is7xx_spi_uart_driver); if (ret < 0) { pr_err("failed to init sc16is7xx spi --> %d\n", ret); - return ret; + goto err_spi; } #endif return ret; + +err_spi: +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C + i2c_del_driver(&sc16is7xx_i2c_uart_driver); +#endif +err_i2c: + uart_unregister_driver(&sc16is7xx_uart); + return ret; } module_init(sc16is7xx_init); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 55ed4c66f77f..3701b240fcb3 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -141,9 +141,6 @@ static void uart_start(struct tty_struct *tty) struct uart_port *port; unsigned long flags; - if (!state) - return; - port = uart_port_lock(state, flags); __uart_start(tty); uart_port_unlock(port, flags); @@ -1109,7 +1106,7 @@ static int uart_break_ctl(struct tty_struct *tty, int break_state) if (!uport) goto out; - if (uport->type != PORT_UNKNOWN) + if (uport->type != PORT_UNKNOWN && uport->ops->break_ctl) uport->ops->break_ctl(uport, break_state); ret = 0; out: @@ -1714,11 +1711,8 @@ static void uart_dtr_rts(struct tty_port *port, int onoff) */ static int uart_open(struct tty_struct *tty, struct file *filp) { - struct uart_driver *drv = tty->driver->driver_state; - int retval, line = tty->index; - struct uart_state *state = drv->state + line; - - tty->driver_data = state; + struct uart_state *state = tty->driver_data; + int retval; retval = tty_port_open(&state->port, tty, filp); if (retval > 0) @@ -1731,6 +1725,7 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty) { struct uart_state *state = container_of(port, struct uart_state, port); struct uart_port *uport; + int ret; uport = uart_port_check(state); if (!uport || uport->flags & UPF_DEAD) @@ -1741,7 +1736,11 @@ static int uart_port_activate(struct tty_port *port, struct tty_struct *tty) /* * Start up the serial port. */ - return uart_startup(tty, state, 0); + ret = uart_startup(tty, state, 0); + if (ret > 0) + tty_port_set_active(port, 1); + + return ret; } static const char *uart_type(struct uart_port *port) @@ -2409,9 +2408,6 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) struct uart_state *state = drv->state + line; struct uart_port *port; - if (!state) - return; - port = uart_port_ref(state); if (!port) return; @@ -2423,7 +2419,18 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) } #endif +static int uart_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + tty->index; + + tty->driver_data = state; + + return tty_standard_install(driver, tty); +} + static const struct tty_operations uart_ops = { + .install = uart_install, .open = uart_open, .close = uart_close, .write = uart_write, @@ -2788,6 +2795,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) if (uport->cons && uport->dev) of_console_check(uport->dev->of_node, uport->cons->name, uport->line); + tty_port_link_device(port, drv->tty_driver, uport->line); uart_configure_port(drv, state, uport); port->console = uart_console(uport); diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index d2da6aa7f27d..1bb15edcf1e7 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -68,6 +68,9 @@ EXPORT_SYMBOL_GPL(mctrl_gpio_set); struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, enum mctrl_gpio_idx gidx) { + if (gpios == NULL) + return NULL; + return gpios->gpio[gidx]; } EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 6ff53b604ff6..ea35f5144237 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -834,19 +834,9 @@ static void sci_transmit_chars(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_empty(xmit)) { + if (uart_circ_empty(xmit)) sci_stop_tx(port); - } else { - ctrl = serial_port_in(port, SCSCR); - - if (port->type != PORT_SCI) { - serial_port_in(port, SCxSR); /* Dummy read */ - sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port)); - } - ctrl |= SCSCR_TIE; - serial_port_out(port, SCSCR, ctrl); - } } /* On SH3, SCIF may read end-of-break as a space->mark char */ @@ -1301,6 +1291,7 @@ static void work_fn_tx(struct work_struct *work) struct uart_port *port = &s->port; struct circ_buf *xmit = &port->state->xmit; dma_addr_t buf; + int head, tail; /* * DMA is idle now. @@ -1310,16 +1301,23 @@ static void work_fn_tx(struct work_struct *work) * consistent xmit buffer state. */ spin_lock_irq(&port->lock); - buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1)); + head = xmit->head; + tail = xmit->tail; + buf = s->tx_dma_addr + (tail & (UART_XMIT_SIZE - 1)); s->tx_dma_len = min_t(unsigned int, - CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), - CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); - spin_unlock_irq(&port->lock); + CIRC_CNT(head, tail, UART_XMIT_SIZE), + CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE)); + if (!s->tx_dma_len) { + /* Transmit buffer has been flushed */ + spin_unlock_irq(&port->lock); + return; + } desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { + spin_unlock_irq(&port->lock); dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n"); /* switch to PIO */ sci_tx_dma_release(s, true); @@ -1329,20 +1327,20 @@ static void work_fn_tx(struct work_struct *work) dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len, DMA_TO_DEVICE); - spin_lock_irq(&port->lock); desc->callback = sci_dma_tx_complete; desc->callback_param = s; - spin_unlock_irq(&port->lock); s->cookie_tx = dmaengine_submit(desc); if (dma_submit_error(s->cookie_tx)) { + spin_unlock_irq(&port->lock); dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); /* switch to PIO */ sci_tx_dma_release(s, true); return; } + spin_unlock_irq(&port->lock); dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", - __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx); + __func__, xmit->buf, tail, head, s->cookie_tx); dma_async_issue_pending(chan); } @@ -1548,11 +1546,18 @@ static void sci_free_dma(struct uart_port *port) static void sci_flush_buffer(struct uart_port *port) { + struct sci_port *s = to_sci_port(port); + /* * In uart_flush_buffer(), the xmit circular buffer has just been - * cleared, so we have to reset tx_dma_len accordingly. + * cleared, so we have to reset tx_dma_len accordingly, and stop any + * pending transfers */ - to_sci_port(port)->tx_dma_len = 0; + s->tx_dma_len = 0; + if (s->chan_tx) { + dmaengine_terminate_async(s->chan_tx); + s->cookie_tx = -EINVAL; + } } #else /* !CONFIG_SERIAL_SH_SCI_DMA */ static inline void sci_request_dma(struct uart_port *port) diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 747560feb63e..2e34239ac8a9 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -240,7 +240,7 @@ static inline void sprd_rx(struct uart_port *port) if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE | SPRD_LSR_FE | SPRD_LSR_OE)) - if (handle_lsr_errors(port, &lsr, &flag)) + if (handle_lsr_errors(port, &flag, &lsr)) continue; if (uart_handle_sysrq_char(port, ch)) continue; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 033856287ca2..ea8b591dd46f 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -293,13 +293,8 @@ static void stm32_transmit_chars(struct uart_port *port) return; } - if (uart_tx_stopped(port)) { - stm32_stop_tx(port); - return; - } - - if (uart_circ_empty(xmit)) { - stm32_stop_tx(port); + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE); return; } @@ -312,7 +307,7 @@ static void stm32_transmit_chars(struct uart_port *port) uart_write_wakeup(port); if (uart_circ_empty(xmit)) - stm32_stop_tx(port); + stm32_clr_bits(port, ofs->cr1, USART_CR1_TXEIE); } static irqreturn_t stm32_interrupt(int irq, void *ptr) diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index 59828d819145..5ad978acd90c 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -392,7 +392,7 @@ static struct uart_ops sunhv_pops = { static struct uart_driver sunhv_reg = { .owner = THIS_MODULE, .driver_name = "sunhv", - .dev_name = "ttyS", + .dev_name = "ttyHV", .major = TTY_MAJOR, }; diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 817bb0d3f326..9a54aafe8405 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -746,7 +746,8 @@ err_uart: static void __exit ulite_exit(void) { platform_driver_unregister(&ulite_platform_driver); - uart_unregister_driver(&ulite_uart_driver); + if (ulite_uart_driver.state) + uart_unregister_driver(&ulite_uart_driver); } module_init(ulite_init); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index ffb474c49f0f..eb61a07fcbbc 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1261,7 +1261,7 @@ static void cdns_uart_console_write(struct console *co, const char *s, * * Return: 0 on success, negative errno otherwise. */ -static int __init cdns_uart_console_setup(struct console *co, char *options) +static int cdns_uart_console_setup(struct console *co, char *options) { struct uart_port *port = &cdns_uart_port[co->index]; int baud = 9600; diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 7aca2d4670e4..7446ce29f677 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -1187,14 +1187,13 @@ static long slgt_compat_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct slgt_info *info = tty->driver_data; - int rc = -ENOIOCTLCMD; + int rc; if (sanity_check(info, tty->name, "compat_ioctl")) return -ENODEV; DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd)); switch (cmd) { - case MGSL_IOCSPARAMS32: rc = set_params32(info, compat_ptr(arg)); break; @@ -1214,18 +1213,11 @@ static long slgt_compat_ioctl(struct tty_struct *tty, case MGSL_IOCWAITGPIO: case MGSL_IOCGXSYNC: case MGSL_IOCGXCTRL: - case MGSL_IOCSTXIDLE: - case MGSL_IOCTXENABLE: - case MGSL_IOCRXENABLE: - case MGSL_IOCTXABORT: - case TIOCMIWAIT: - case MGSL_IOCSIF: - case MGSL_IOCSXSYNC: - case MGSL_IOCSXCTRL: - rc = ioctl(tty, cmd, arg); + rc = ioctl(tty, cmd, (unsigned long)compat_ptr(arg)); break; + default: + rc = ioctl(tty, cmd, arg); } - DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc)); return rc; } @@ -1357,10 +1349,10 @@ static void throttle(struct tty_struct * tty) DBGINFO(("%s throttle\n", info->device_name)); if (I_IXOFF(tty)) send_xchar(tty, STOP_CHAR(tty)); - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals &= ~SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1382,10 +1374,10 @@ static void unthrottle(struct tty_struct * tty) else send_xchar(tty, START_CHAR(tty)); } - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->signals |= SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -2584,8 +2576,8 @@ static void change_params(struct slgt_info *info) info->read_status_mask = IRQ_RXOVER; if (I_INPCK(info->port.tty)) info->read_status_mask |= MASK_PARITY | MASK_FRAMING; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= MASK_BREAK; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= MASK_BREAK; if (I_IGNPAR(info->port.tty)) info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; if (I_IGNBRK(info->port.tty)) { @@ -3216,7 +3208,7 @@ static int tiocmset(struct tty_struct *tty, info->signals &= ~SerialSignal_DTR; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); return 0; } @@ -3227,7 +3219,7 @@ static int carrier_raised(struct tty_port *port) struct slgt_info *info = container_of(port, struct slgt_info, port); spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags); return (info->signals & SerialSignal_DCD) ? 1 : 0; } @@ -3242,7 +3234,7 @@ static void dtr_rts(struct tty_port *port, int on) info->signals |= SerialSignal_RTS | SerialSignal_DTR; else info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index dec156586de1..2f6df8d74b4a 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -1467,10 +1467,10 @@ static void throttle(struct tty_struct * tty) if (I_IXOFF(tty)) send_xchar(tty, STOP_CHAR(tty)); - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -1496,10 +1496,10 @@ static void unthrottle(struct tty_struct * tty) send_xchar(tty, START_CHAR(tty)); } - if (C_CRTSCTS(tty)) { + if (C_CRTSCTS(tty)) { spin_lock_irqsave(&info->lock,flags); info->serial_signals |= SerialSignal_RTS; - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } } @@ -2485,7 +2485,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status ) if (status & SerialSignal_CTS) { if ( debug_level >= DEBUG_LEVEL_ISR ) printk("CTS tx start..."); - info->port.tty->hw_stopped = 0; + info->port.tty->hw_stopped = 0; tx_start(info); info->pending_bh |= BH_TRANSMIT; return; @@ -2494,7 +2494,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status ) if (!(status & SerialSignal_CTS)) { if ( debug_level >= DEBUG_LEVEL_ISR ) printk("CTS tx stop..."); - info->port.tty->hw_stopped = 1; + info->port.tty->hw_stopped = 1; tx_stop(info); } } @@ -2821,8 +2821,8 @@ static void change_params(SLMP_INFO *info) info->read_status_mask2 = OVRN; if (I_INPCK(info->port.tty)) info->read_status_mask2 |= PE | FRME; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask1 |= BRKD; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask1 |= BRKD; if (I_IGNPAR(info->port.tty)) info->ignore_status_mask2 |= PE | FRME; if (I_IGNBRK(info->port.tty)) { @@ -3192,7 +3192,7 @@ static int tiocmget(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags); result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) | @@ -3230,7 +3230,7 @@ static int tiocmset(struct tty_struct *tty, info->serial_signals &= ~SerialSignal_DTR; spin_lock_irqsave(&info->lock,flags); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); return 0; @@ -3242,7 +3242,7 @@ static int carrier_raised(struct tty_port *port) unsigned long flags; spin_lock_irqsave(&info->lock,flags); - get_signals(info); + get_signals(info); spin_unlock_irqrestore(&info->lock,flags); return (info->serial_signals & SerialSignal_DCD) ? 1 : 0; @@ -3258,7 +3258,7 @@ static void dtr_rts(struct tty_port *port, int on) info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; else info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - set_signals(info); + set_signals(info); spin_unlock_irqrestore(&info->lock,flags); } diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 53cbf4ebef10..b6ff01131eef 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -543,7 +543,6 @@ void __handle_sysrq(int key, bool check_mask) */ orig_log_level = console_loglevel; console_loglevel = CONSOLE_LOGLEVEL_DEFAULT; - pr_info("SysRq : "); op_p = __sysrq_get_key_op(key); if (op_p) { @@ -552,14 +551,15 @@ void __handle_sysrq(int key, bool check_mask) * should not) and is the invoked operation enabled? */ if (!check_mask || sysrq_on_mask(op_p->enable_mask)) { - pr_cont("%s\n", op_p->action_msg); + pr_info("%s\n", op_p->action_msg); console_loglevel = orig_log_level; op_p->handler(key); } else { - pr_cont("This sysrq operation is disabled.\n"); + pr_info("This sysrq operation is disabled.\n"); + console_loglevel = orig_log_level; } } else { - pr_cont("HELP : "); + pr_info("HELP : "); /* Only print the help msg once per handler */ for (i = 0; i < ARRAY_SIZE(sysrq_key_table); i++) { if (sysrq_key_table[i]) { diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 41b9a7ccce08..ca9c82ee6c35 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -25,7 +25,7 @@ * Byte threshold to limit memory consumption for flip buffers. * The actual memory limit is > 2x this amount. */ -#define TTYB_DEFAULT_MEM_LIMIT 65536 +#define TTYB_DEFAULT_MEM_LIMIT (640 * 1024UL) /* * We default to dicing tty buffer allocations to this many characters diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 19fe1e8fc124..15e0116e1232 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -520,6 +520,8 @@ void proc_clear_tty(struct task_struct *p) tty_kref_put(tty); } +extern void tty_sysctl_init(void); + /** * proc_set_tty - set the controlling terminal * @@ -3705,6 +3707,7 @@ void console_sysfs_notify(void) */ int __init tty_init(void) { + tty_sysctl_init(); cdev_init(&tty_cdev, &tty_fops); if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0) diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 4ab518d43758..706faca834f2 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -155,6 +155,13 @@ static void put_ldops(struct tty_ldisc_ops *ldops) * takes tty_ldiscs_lock to guard against ldisc races */ +#if defined(CONFIG_LDISC_AUTOLOAD) + #define INITIAL_AUTOLOAD_STATE 1 +#else + #define INITIAL_AUTOLOAD_STATE 0 +#endif +static int tty_ldisc_autoload = INITIAL_AUTOLOAD_STATE; + static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc) { struct tty_ldisc *ld; @@ -169,6 +176,8 @@ static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc) */ ldops = get_ldops(disc); if (IS_ERR(ldops)) { + if (!capable(CAP_SYS_MODULE) && !tty_ldisc_autoload) + return ERR_PTR(-EPERM); request_module("tty-ldisc-%d", disc); ldops = get_ldops(disc); if (IS_ERR(ldops)) @@ -339,6 +348,11 @@ int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout) { int ret; + /* Kindly asking blocked readers to release the read side */ + set_bit(TTY_LDISC_CHANGING, &tty->flags); + wake_up_interruptible_all(&tty->read_wait); + wake_up_interruptible_all(&tty->write_wait); + ret = __tty_ldisc_lock(tty, timeout); if (!ret) return -EBUSY; @@ -349,6 +363,8 @@ int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout) void tty_ldisc_unlock(struct tty_struct *tty) { clear_bit(TTY_LDISC_HALTED, &tty->flags); + /* Can be cleared here - ldisc_unlock will wake up writers firstly */ + clear_bit(TTY_LDISC_CHANGING, &tty->flags); __tty_ldisc_unlock(tty); } @@ -774,3 +790,41 @@ void tty_ldisc_deinit(struct tty_struct *tty) tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; } + +static int zero; +static int one = 1; +static struct ctl_table tty_table[] = { + { + .procname = "ldisc_autoload", + .data = &tty_ldisc_autoload, + .maxlen = sizeof(tty_ldisc_autoload), + .mode = 0644, + .proc_handler = proc_dointvec, + .extra1 = &zero, + .extra2 = &one, + }, + { } +}; + +static struct ctl_table tty_dir_table[] = { + { + .procname = "tty", + .mode = 0555, + .child = tty_table, + }, + { } +}; + +static struct ctl_table tty_root_table[] = { + { + .procname = "dev", + .mode = 0555, + .child = tty_dir_table, + }, + { } +}; + +void tty_sysctl_init(void) +{ + register_sysctl_table(tty_root_table); +} diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c index dbd7ba32caac..6c5eb99fcfce 100644 --- a/drivers/tty/tty_ldsem.c +++ b/drivers/tty/tty_ldsem.c @@ -137,8 +137,7 @@ static void __ldsem_wake_readers(struct ld_semaphore *sem) list_for_each_entry_safe(waiter, next, &sem->read_wait, list) { tsk = waiter->task; - smp_mb(); - waiter->task = NULL; + smp_store_release(&waiter->task, NULL); wake_up_process(tsk); put_task_struct(tsk); } @@ -234,7 +233,7 @@ down_read_failed(struct ld_semaphore *sem, long count, long timeout) for (;;) { set_task_state(tsk, TASK_UNINTERRUPTIBLE); - if (!waiter.task) + if (!smp_load_acquire(&waiter.task)) break; if (!timeout) break; diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index ece10e6b731b..b4e7a7317713 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -121,6 +121,7 @@ static const int NR_TYPES = ARRAY_SIZE(max_vals); static struct input_handler kbd_handler; static DEFINE_SPINLOCK(kbd_event_lock); static DEFINE_SPINLOCK(led_lock); +static DEFINE_SPINLOCK(func_buf_lock); /* guard 'func_buf' and friends */ static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */ static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */ static bool dead_key_next; @@ -1459,7 +1460,7 @@ static void kbd_event(struct input_handle *handle, unsigned int event_type, if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev)) kbd_rawcode(value); - if (event_type == EV_KEY) + if (event_type == EV_KEY && event_code <= KEY_MAX) kbd_keycode(event_code, value, HW_RAW(handle->dev)); spin_unlock(&kbd_event_lock); @@ -1959,11 +1960,12 @@ int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) char *p; u_char *q; u_char __user *up; - int sz; + int sz, fnw_sz; int delta; char *first_free, *fj, *fnw; int i, j, k; int ret; + unsigned long flags; if (!capable(CAP_SYS_TTY_CONFIG)) perm = 0; @@ -2006,7 +2008,14 @@ int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) goto reterr; } + fnw = NULL; + fnw_sz = 0; + /* race aginst other writers */ + again: + spin_lock_irqsave(&func_buf_lock, flags); q = func_table[i]; + + /* fj pointer to next entry after 'q' */ first_free = funcbufptr + (funcbufsize - funcbufleft); for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++) ; @@ -2014,10 +2023,12 @@ int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) fj = func_table[j]; else fj = first_free; - + /* buffer usage increase by new entry */ delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string); + if (delta <= funcbufleft) { /* it fits in current buf */ if (j < MAX_NR_FUNC) { + /* make enough space for new entry at 'fj' */ memmove(fj + delta, fj, first_free - fj); for (k = j; k < MAX_NR_FUNC; k++) if (func_table[k]) @@ -2030,20 +2041,28 @@ int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) sz = 256; while (sz < funcbufsize - funcbufleft + delta) sz <<= 1; - fnw = kmalloc(sz, GFP_KERNEL); - if(!fnw) { - ret = -ENOMEM; - goto reterr; + if (fnw_sz != sz) { + spin_unlock_irqrestore(&func_buf_lock, flags); + kfree(fnw); + fnw = kmalloc(sz, GFP_KERNEL); + fnw_sz = sz; + if (!fnw) { + ret = -ENOMEM; + goto reterr; + } + goto again; } if (!q) func_table[i] = fj; + /* copy data before insertion point to new location */ if (fj > funcbufptr) memmove(fnw, funcbufptr, fj - funcbufptr); for (k = 0; k < j; k++) if (func_table[k]) func_table[k] = fnw + (func_table[k] - funcbufptr); + /* copy data after insertion point to new location */ if (first_free > fj) { memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj); for (k = j; k < MAX_NR_FUNC; k++) @@ -2056,7 +2075,9 @@ int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm) funcbufleft = funcbufleft - delta + sz - funcbufsize; funcbufsize = sz; } + /* finally insert item itself */ strcpy(func_table[i], kbs->kb_string); + spin_unlock_irqrestore(&func_buf_lock, flags); break; } ret = 0; diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 368ce1803e8f..225689c76623 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -13,6 +13,7 @@ #include <linux/tty.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/mutex.h> #include <linux/slab.h> #include <linux/types.h> @@ -40,6 +41,7 @@ static volatile int sel_start = -1; /* cleared by clear_selection */ static int sel_end; static int sel_buffer_lth; static char *sel_buffer; +static DEFINE_MUTEX(sel_lock); /* clear_selection, highlight and highlight_pointer can be called from interrupt (via scrollback/front) */ @@ -78,6 +80,11 @@ void clear_selection(void) } } +bool vc_is_sel(struct vc_data *vc) +{ + return vc == sel_cons; +} + /* * User settable table: what characters are to be considered alphabetic? * 256 bits. Locked by the console lock. @@ -156,14 +163,14 @@ static int store_utf8(u16 c, char *p) * The entire selection process is managed under the console_lock. It's * a lot under the lock but its hardly a performance path */ -int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty) +static int __set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty) { struct vc_data *vc = vc_cons[fg_console].d; int sel_mode, new_sel_start, new_sel_end, spc; char *bp, *obp; int i, ps, pe, multiplier; u16 c; - int mode; + int mode, ret = 0; poke_blanked_console(); @@ -324,7 +331,21 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t } } sel_buffer_lth = bp - sel_buffer; - return 0; + + return ret; +} + +int set_selection(const struct tiocl_selection __user *v, struct tty_struct *tty) +{ + int ret; + + mutex_lock(&sel_lock); + console_lock(); + ret = __set_selection(v, tty); + console_unlock(); + mutex_unlock(&sel_lock); + + return ret; } /* Insert the contents of the selection buffer into the @@ -341,6 +362,7 @@ int paste_selection(struct tty_struct *tty) unsigned int count; struct tty_ldisc *ld; DECLARE_WAITQUEUE(wait, current); + int ret = 0; console_lock(); poke_blanked_console(); @@ -352,10 +374,17 @@ int paste_selection(struct tty_struct *tty) tty_buffer_lock_exclusive(&vc->port); add_wait_queue(&vc->paste_wait, &wait); + mutex_lock(&sel_lock); while (sel_buffer && sel_buffer_lth > pasted) { set_current_state(TASK_INTERRUPTIBLE); + if (signal_pending(current)) { + ret = -EINTR; + break; + } if (tty_throttled(tty)) { + mutex_unlock(&sel_lock); schedule(); + mutex_lock(&sel_lock); continue; } __set_current_state(TASK_RUNNING); @@ -364,10 +393,11 @@ int paste_selection(struct tty_struct *tty) count); pasted += count; } + mutex_unlock(&sel_lock); remove_wait_queue(&vc->paste_wait, &wait); __set_current_state(TASK_RUNNING); tty_buffer_unlock_exclusive(&vc->port); tty_ldisc_deref(ld); - return 0; + return ret; } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 232cb0a760b9..29fb08c8a2fd 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -595,8 +595,9 @@ static void hide_softcursor(struct vc_data *vc) static void hide_cursor(struct vc_data *vc) { - if (vc == sel_cons) + if (vc_is_sel(vc)) clear_selection(); + vc->vc_sw->con_cursor(vc, CM_ERASE); hide_softcursor(vc); } @@ -606,7 +607,7 @@ static void set_cursor(struct vc_data *vc) if (!con_is_fg(vc) || console_blanked || vc->vc_mode == KD_GRAPHICS) return; if (vc->vc_deccm) { - if (vc == sel_cons) + if (vc_is_sel(vc)) clear_selection(); add_softcursor(vc); if ((vc->vc_cursor_type & 0x0f) != 1) @@ -753,6 +754,17 @@ static void visual_init(struct vc_data *vc, int num, int init) vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row; } +static void vc_port_destruct(struct tty_port *port) +{ + struct vc_data *vc = container_of(port, struct vc_data, port); + + kfree(vc); +} + +static const struct tty_port_operations vc_port_ops = { + .destruct = vc_port_destruct, +}; + int vc_allocate(unsigned int currcons) /* return 0 on success */ { struct vt_notifier_param param; @@ -778,6 +790,7 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ vc_cons[currcons].d = vc; tty_port_init(&vc->port); + vc->port.ops = &vc_port_ops; INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK); visual_init(vc, currcons, 1); @@ -876,7 +889,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc, if (!newscreen) return -ENOMEM; - if (vc == sel_cons) + if (vc_is_sel(vc)) clear_selection(); old_rows = vc->vc_rows; @@ -2690,9 +2703,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) switch (type) { case TIOCL_SETSEL: - console_lock(); ret = set_selection((struct tiocl_selection __user *)(p+1), tty); - console_unlock(); break; case TIOCL_PASTESEL: ret = paste_selection(tty); @@ -2898,6 +2909,7 @@ static int con_install(struct tty_driver *driver, struct tty_struct *tty) tty->driver_data = vc; vc->port.tty = tty; + tty_port_get(&vc->port); if (!tty->winsize.ws_row && !tty->winsize.ws_col) { tty->winsize.ws_row = vc_cons[currcons].d->vc_rows; @@ -2933,6 +2945,13 @@ static void con_shutdown(struct tty_struct *tty) console_unlock(); } +static void con_cleanup(struct tty_struct *tty) +{ + struct vc_data *vc = tty->driver_data; + + tty_port_put(&vc->port); +} + static int default_color = 7; /* white */ static int default_italic_color = 2; // green (ASCII) static int default_underline_color = 3; // cyan (ASCII) @@ -3057,7 +3076,8 @@ static const struct tty_operations con_ops = { .throttle = con_throttle, .unthrottle = con_unthrottle, .resize = vt_resize, - .shutdown = con_shutdown + .shutdown = con_shutdown, + .cleanup = con_cleanup, }; static struct cdev vc0_cdev; diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 638eb9bbd59f..4ed0d77e5918 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -38,11 +38,32 @@ #include <linux/kbd_diacr.h> #include <linux/selection.h> -char vt_dont_switch; -extern struct tty_driver *console_driver; +bool vt_dont_switch; -#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count) -#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons) +static inline bool vt_in_use(unsigned int i) +{ + const struct vc_data *vc = vc_cons[i].d; + + /* + * console_lock must be held to prevent the vc from being deallocated + * while we're checking whether it's in-use. + */ + WARN_CONSOLE_UNLOCKED(); + + return vc && kref_read(&vc->port.kref) > 1; +} + +static inline bool vt_busy(int i) +{ + if (vt_in_use(i)) + return true; + if (i == fg_console) + return true; + if (vc_is_sel(vc_cons[i].d)) + return true; + + return false; +} /* * Console (vt and kd) routines, as defined by USL SVR4 manual, and by @@ -292,16 +313,14 @@ static int vt_disallocate(unsigned int vc_num) int ret = 0; console_lock(); - if (VT_BUSY(vc_num)) + if (vt_busy(vc_num)) ret = -EBUSY; else if (vc_num) vc = vc_deallocate(vc_num); console_unlock(); - if (vc && vc_num >= MIN_NR_CONSOLES) { - tty_port_destroy(&vc->port); - kfree(vc); - } + if (vc && vc_num >= MIN_NR_CONSOLES) + tty_port_put(&vc->port); return ret; } @@ -314,17 +333,15 @@ static void vt_disallocate_all(void) console_lock(); for (i = 1; i < MAX_NR_CONSOLES; i++) - if (!VT_BUSY(i)) + if (!vt_busy(i)) vc[i] = vc_deallocate(i); else vc[i] = NULL; console_unlock(); for (i = 1; i < MAX_NR_CONSOLES; i++) { - if (vc[i] && i >= MIN_NR_CONSOLES) { - tty_port_destroy(&vc[i]->port); - kfree(vc[i]); - } + if (vc[i] && i >= MIN_NR_CONSOLES) + tty_port_put(&vc[i]->port); } } @@ -338,22 +355,13 @@ int vt_ioctl(struct tty_struct *tty, { struct vc_data *vc = tty->driver_data; struct console_font_op op; /* used in multiple places here */ - unsigned int console; + unsigned int console = vc->vc_num; unsigned char ucval; unsigned int uival; void __user *up = (void __user *)arg; int i, perm; int ret = 0; - console = vc->vc_num; - - - if (!vc_cons_allocated(console)) { /* impossible? */ - ret = -ENOIOCTLCMD; - goto out; - } - - /* * To have permissions to do most of the vt ioctls, we either have * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG. @@ -644,15 +652,16 @@ int vt_ioctl(struct tty_struct *tty, struct vt_stat __user *vtstat = up; unsigned short state, mask; - /* Review: FIXME: Console lock ? */ if (put_user(fg_console + 1, &vtstat->v_active)) ret = -EFAULT; else { state = 1; /* /dev/tty0 is always open */ + console_lock(); /* required by vt_in_use() */ for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask; ++i, mask <<= 1) - if (VT_IS_IN_USE(i)) + if (vt_in_use(i)) state |= mask; + console_unlock(); ret = put_user(state, &vtstat->v_state); } break; @@ -662,10 +671,11 @@ int vt_ioctl(struct tty_struct *tty, * Returns the first available (non-opened) console. */ case VT_OPENQRY: - /* FIXME: locking ? - but then this is a stupid API */ + console_lock(); /* required by vt_in_use() */ for (i = 0; i < MAX_NR_CONSOLES; ++i) - if (! VT_IS_IN_USE(i)) + if (!vt_in_use(i)) break; + console_unlock(); uival = i < MAX_NR_CONSOLES ? (i+1) : -1; goto setint; @@ -850,58 +860,49 @@ int vt_ioctl(struct tty_struct *tty, case VT_RESIZEX: { - struct vt_consize __user *vtconsize = up; - ushort ll,cc,vlin,clin,vcol,ccol; + struct vt_consize v; if (!perm) return -EPERM; - if (!access_ok(VERIFY_READ, vtconsize, - sizeof(struct vt_consize))) { - ret = -EFAULT; - break; - } + if (copy_from_user(&v, up, sizeof(struct vt_consize))) + return -EFAULT; /* FIXME: Should check the copies properly */ - __get_user(ll, &vtconsize->v_rows); - __get_user(cc, &vtconsize->v_cols); - __get_user(vlin, &vtconsize->v_vlin); - __get_user(clin, &vtconsize->v_clin); - __get_user(vcol, &vtconsize->v_vcol); - __get_user(ccol, &vtconsize->v_ccol); - vlin = vlin ? vlin : vc->vc_scan_lines; - if (clin) { - if (ll) { - if (ll != vlin/clin) { - /* Parameters don't add up */ - ret = -EINVAL; - break; - } - } else - ll = vlin/clin; + if (!v.v_vlin) + v.v_vlin = vc->vc_scan_lines; + if (v.v_clin) { + int rows = v.v_vlin/v.v_clin; + if (v.v_rows != rows) { + if (v.v_rows) /* Parameters don't add up */ + return -EINVAL; + v.v_rows = rows; + } } - if (vcol && ccol) { - if (cc) { - if (cc != vcol/ccol) { - ret = -EINVAL; - break; - } - } else - cc = vcol/ccol; + if (v.v_vcol && v.v_ccol) { + int cols = v.v_vcol/v.v_ccol; + if (v.v_cols != cols) { + if (v.v_cols) + return -EINVAL; + v.v_cols = cols; + } } - if (clin > 32) { - ret = -EINVAL; - break; - } - + if (v.v_clin > 32) + return -EINVAL; + for (i = 0; i < MAX_NR_CONSOLES; i++) { + struct vc_data *vcp; + if (!vc_cons[i].d) continue; console_lock(); - if (vlin) - vc_cons[i].d->vc_scan_lines = vlin; - if (clin) - vc_cons[i].d->vc_font.height = clin; - vc_cons[i].d->vc_resize_user = 1; - vc_resize(vc_cons[i].d, cc, ll); + vcp = vc_cons[i].d; + if (vcp) { + if (v.v_vlin) + vcp->vc_scan_lines = v.v_vlin; + if (v.v_clin) + vcp->vc_font.height = v.v_clin; + vcp->vc_resize_user = 1; + vc_resize(vcp, v.v_cols, v.v_rows); + } console_unlock(); } break; @@ -1023,12 +1024,12 @@ int vt_ioctl(struct tty_struct *tty, case VT_LOCKSWITCH: if (!capable(CAP_SYS_TTY_CONFIG)) return -EPERM; - vt_dont_switch = 1; + vt_dont_switch = true; break; case VT_UNLOCKSWITCH: if (!capable(CAP_SYS_TTY_CONFIG)) return -EPERM; - vt_dont_switch = 0; + vt_dont_switch = false; break; case VT_GETHIFONTMASK: ret = put_user(vc->vc_hi_font_mask, @@ -1196,18 +1197,10 @@ long vt_compat_ioctl(struct tty_struct *tty, { struct vc_data *vc = tty->driver_data; struct console_font_op op; /* used in multiple places here */ - unsigned int console; void __user *up = (void __user *)arg; int perm; int ret = 0; - console = vc->vc_num; - - if (!vc_cons_allocated(console)) { /* impossible? */ - ret = -ENOIOCTLCMD; - goto out; - } - /* * To have permissions to do most of the vt ioctls, we either have * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG. @@ -1267,7 +1260,7 @@ long vt_compat_ioctl(struct tty_struct *tty, arg = (unsigned long)compat_ptr(arg); goto fallback; } -out: + return ret; fallback: |