diff options
Diffstat (limited to 'drivers/usb/core/hub.c')
| -rw-r--r-- | drivers/usb/core/hub.c | 144 |
1 files changed, 117 insertions, 27 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5ce839137ad6..06af970e1064 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -45,7 +45,6 @@ struct usb_hub { /* buffer for urb ... with extra space in case of babble */ char (*buffer)[8]; - dma_addr_t buffer_dma; /* DMA address for buffer */ union { struct usb_hub_status hub; struct usb_port_status port; @@ -61,6 +60,8 @@ struct usb_hub { status change */ unsigned long busy_bits[1]; /* ports being reset or resumed */ + unsigned long removed_bits[1]; /* ports with a "removed" + device present */ #if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */ #error event_bits[] is too short! #endif @@ -70,6 +71,7 @@ struct usb_hub { unsigned mA_per_port; /* current for each child */ + unsigned init_done:1; unsigned limited_power:1; unsigned quiescing:1; unsigned disconnected:1; @@ -374,12 +376,13 @@ static void kick_khubd(struct usb_hub *hub) { unsigned long flags; - /* Suppress autosuspend until khubd runs */ - atomic_set(&to_usb_interface(hub->intfdev)->pm_usage_cnt, 1); - spin_lock_irqsave(&hub_event_lock, flags); if (!hub->disconnected && list_empty(&hub->event_list)) { list_add_tail(&hub->event_list, &hub_event_list); + + /* Suppress autosuspend until khubd runs */ + usb_autopm_get_interface_no_resume( + to_usb_interface(hub->intfdev)); wake_up(&khubd_wait); } spin_unlock_irqrestore(&hub_event_lock, flags); @@ -444,7 +447,7 @@ resubmit: static inline int hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt) { - return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), + return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo, tt, NULL, 0, 1000); } @@ -636,8 +639,35 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) kick_khubd(hub); } +/** + * usb_remove_device - disable a device's port on its parent hub + * @udev: device to be disabled and removed + * Context: @udev locked, must be able to sleep. + * + * After @udev's port has been disabled, khubd is notified and it will + * see that the device has been disconnected. When the device is + * physically unplugged and something is plugged in, the events will + * be received and processed normally. + */ +int usb_remove_device(struct usb_device *udev) +{ + struct usb_hub *hub; + struct usb_interface *intf; + + if (!udev->parent) /* Can't remove a root hub */ + return -EINVAL; + hub = hdev_to_hub(udev->parent); + intf = to_usb_interface(hub->intfdev); + + usb_autopm_get_interface(intf); + set_bit(udev->portnum, hub->removed_bits); + hub_port_logical_disconnect(hub, udev->portnum); + usb_autopm_put_interface(intf); + return 0; +} + enum hub_activation_type { - HUB_INIT, HUB_INIT2, HUB_INIT3, + HUB_INIT, HUB_INIT2, HUB_INIT3, /* INITs must come first */ HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, }; @@ -682,8 +712,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) msecs_to_jiffies(delay)); /* Suppress autosuspend until init is done */ - atomic_set(&to_usb_interface(hub->intfdev)-> - pm_usage_cnt, 1); + usb_autopm_get_interface_no_resume( + to_usb_interface(hub->intfdev)); return; /* Continues at init2: below */ } else { hub_power_on(hub, true); @@ -731,6 +761,13 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_PORT_FEAT_C_ENABLE); } + /* We can forget about a "removed" device when there's a + * physical disconnect or the connect status changes. + */ + if (!(portstatus & USB_PORT_STAT_CONNECTION) || + (portchange & USB_PORT_STAT_C_CONNECTION)) + clear_bit(port1, hub->removed_bits); + if (!udev || udev->state == USB_STATE_NOTATTACHED) { /* Tell khubd to disconnect the device or * check for a new connection @@ -783,6 +820,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) } init3: hub->quiescing = 0; + hub->init_done = 1; status = usb_submit_urb(hub->urb, GFP_NOIO); if (status < 0) @@ -792,6 +830,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Scan all ports that need attention */ kick_khubd(hub); + + /* Allow autosuspend if it was suppressed */ + if (type <= HUB_INIT3) + usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); } /* Implement the continuations for the delays above */ @@ -819,6 +861,11 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) int i; cancel_delayed_work_sync(&hub->init_work); + if (!hub->init_done) { + hub->init_done = 1; + usb_autopm_put_interface_no_suspend( + to_usb_interface(hub->intfdev)); + } /* khubd and related activity won't re-trigger */ hub->quiescing = 1; @@ -869,8 +916,7 @@ static int hub_configure(struct usb_hub *hub, int maxp, ret; char *message = "out of memory"; - hub->buffer = usb_buffer_alloc(hdev, sizeof(*hub->buffer), GFP_KERNEL, - &hub->buffer_dma); + hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL); if (!hub->buffer) { ret = -ENOMEM; goto fail; @@ -1111,8 +1157,6 @@ static int hub_configure(struct usb_hub *hub, usb_fill_int_urb(hub->urb, hdev, pipe, *hub->buffer, maxp, hub_irq, hub, endpoint->bInterval); - hub->urb->transfer_dma = hub->buffer_dma; - hub->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; /* maybe cycle the hub leds */ if (hub->has_indicators && blinkenlights) @@ -1144,7 +1188,10 @@ static void hub_disconnect(struct usb_interface *intf) /* Take the hub off the event list and don't let it be added again */ spin_lock_irq(&hub_event_lock); - list_del_init(&hub->event_list); + if (!list_empty(&hub->event_list)) { + list_del_init(&hub->event_list); + usb_autopm_put_interface_no_suspend(intf); + } hub->disconnected = 1; spin_unlock_irq(&hub_event_lock); @@ -1162,8 +1209,7 @@ static void hub_disconnect(struct usb_interface *intf) kfree(hub->port_owners); kfree(hub->descriptor); kfree(hub->status); - usb_buffer_free(hub->hdev, sizeof(*hub->buffer), hub->buffer, - hub->buffer_dma); + kfree(hub->buffer); kref_put(&hub->kref, hub_release); } @@ -1630,7 +1676,7 @@ static int usb_configure_device_otg(struct usb_device *udev) if (!udev->bus->is_b_host && udev->config && udev->parent == udev->bus->root_hub) { - struct usb_otg_descriptor *desc = 0; + struct usb_otg_descriptor *desc = NULL; struct usb_bus *bus = udev->bus; /* descriptor may appear anywhere in config */ @@ -2123,9 +2169,13 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - if (status) + if (status) { dev_dbg(&udev->dev, "won't remote wakeup, status %d\n", status); + /* bail if autosuspend is requested */ + if (msg.event & PM_EVENT_AUTO) + return status; + } } /* see 7.1.7.6 */ @@ -2134,7 +2184,8 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n", port1, status); /* paranoia: "should not happen" */ - (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + if (udev->do_remote_wakeup) + (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE, USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, @@ -2965,6 +3016,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_disconnect(&hdev->children[port1-1]); clear_bit(port1, hub->change_bits); + /* We can forget about a "removed" device when there's a physical + * disconnect or the connect status changes. + */ + if (!(portstatus & USB_PORT_STAT_CONNECTION) || + (portchange & USB_PORT_STAT_C_CONNECTION)) + clear_bit(port1, hub->removed_bits); + if (portchange & (USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE)) { status = hub_port_debounce(hub, port1); @@ -2978,8 +3036,11 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } - /* Return now if debouncing failed or nothing is connected */ - if (!(portstatus & USB_PORT_STAT_CONNECTION)) { + /* Return now if debouncing failed or nothing is connected or + * the device was "removed". + */ + if (!(portstatus & USB_PORT_STAT_CONNECTION) || + test_bit(port1, hub->removed_bits)) { /* maybe switch power back on (e.g. root hub was reset) */ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 @@ -3189,7 +3250,7 @@ static void hub_events(void) * disconnected while waiting for the lock to succeed. */ usb_lock_device(hdev); if (unlikely(hub->disconnected)) - goto loop; + goto loop2; /* If the hub has died, clean up after it */ if (hdev->state == USB_STATE_NOTATTACHED) { @@ -3338,11 +3399,15 @@ static void hub_events(void) } } -loop_autopm: - /* Allow autosuspend if we're not going to run again */ - if (list_empty(&hub->event_list)) - usb_autopm_enable(intf); -loop: + loop_autopm: + /* Balance the usb_autopm_get_interface() above */ + usb_autopm_put_interface_no_suspend(intf); + loop: + /* Balance the usb_autopm_get_interface_no_resume() in + * kick_khubd() and allow autosuspend. + */ + usb_autopm_put_interface(intf); + loop2: usb_unlock_device(hdev); kref_put(&hub->kref, hub_release); @@ -3534,6 +3599,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) { struct usb_device *parent_hdev = udev->parent; struct usb_hub *parent_hub; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); struct usb_device_descriptor descriptor = udev->descriptor; int i, ret = 0; int port1 = udev->portnum; @@ -3577,6 +3643,16 @@ static int usb_reset_and_verify_device(struct usb_device *udev) /* Restore the device's previous configuration */ if (!udev->actconfig) goto done; + + mutex_lock(&hcd->bandwidth_mutex); + ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL); + if (ret < 0) { + dev_warn(&udev->dev, + "Busted HC? Not enough HCD resources for " + "old configuration.\n"); + mutex_unlock(&hcd->bandwidth_mutex); + goto re_enumerate; + } ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_SET_CONFIGURATION, 0, udev->actconfig->desc.bConfigurationValue, 0, @@ -3585,8 +3661,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev) dev_err(&udev->dev, "can't restore configuration #%d (error=%d)\n", udev->actconfig->desc.bConfigurationValue, ret); + mutex_unlock(&hcd->bandwidth_mutex); goto re_enumerate; } + mutex_unlock(&hcd->bandwidth_mutex); usb_set_device_state(udev, USB_STATE_CONFIGURED); /* Put interfaces back into the same altsettings as before. @@ -3596,7 +3674,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev) * endpoint state. */ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { - struct usb_interface *intf = udev->actconfig->interface[i]; + struct usb_host_config *config = udev->actconfig; + struct usb_interface *intf = config->interface[i]; struct usb_interface_descriptor *desc; desc = &intf->cur_altsetting->desc; @@ -3605,6 +3684,17 @@ static int usb_reset_and_verify_device(struct usb_device *udev) usb_enable_interface(udev, intf, true); ret = 0; } else { + /* We've just reset the device, so it will think alt + * setting 0 is installed. For usb_set_interface() to + * work properly, we need to set the current alternate + * interface setting to 0 (or the first alt setting, if + * the device doesn't have alt setting 0). + */ + intf->cur_altsetting = + usb_find_alt_setting(config, i, 0); + if (!intf->cur_altsetting) + intf->cur_altsetting = + &config->intf_cache[i]->altsetting[0]; ret = usb_set_interface(udev, desc->bInterfaceNumber, desc->bAlternateSetting); } |