summaryrefslogtreecommitdiff
path: root/drivers/usb/core/hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r--drivers/usb/core/hub.c199
1 files changed, 130 insertions, 69 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 19d3435e6140..564eaa5525d7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -82,6 +82,10 @@ struct usb_hub {
void **port_owners;
};
+static inline int hub_is_superspeed(struct usb_device *hdev)
+{
+ return (hdev->descriptor.bDeviceProtocol == 3);
+}
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
@@ -151,14 +155,14 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
static int usb_reset_and_verify_device(struct usb_device *udev);
-static inline char *portspeed(int portstatus)
+static inline char *portspeed(struct usb_hub *hub, int portstatus)
{
+ if (hub_is_superspeed(hub->hdev))
+ return "5.0 Gb/s";
if (portstatus & USB_PORT_STAT_HIGH_SPEED)
return "480 Mb/s";
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
return "1.5 Mb/s";
- else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
- return "5.0 Gb/s";
else
return "12 Mb/s";
}
@@ -172,14 +176,23 @@ static struct usb_hub *hdev_to_hub(struct usb_device *hdev)
}
/* USB 2.0 spec Section 11.24.4.5 */
-static int get_hub_descriptor(struct usb_device *hdev, void *data, int size)
+static int get_hub_descriptor(struct usb_device *hdev, void *data)
{
- int i, ret;
+ int i, ret, size;
+ unsigned dtype;
+
+ if (hub_is_superspeed(hdev)) {
+ dtype = USB_DT_SS_HUB;
+ size = USB_DT_SS_HUB_SIZE;
+ } else {
+ dtype = USB_DT_HUB;
+ size = sizeof(struct usb_hub_descriptor);
+ }
for (i = 0; i < 3; i++) {
ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
- USB_DT_HUB << 8, 0, data, size,
+ dtype << 8, 0, data, size,
USB_CTRL_GET_TIMEOUT);
if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
return ret;
@@ -365,6 +378,16 @@ static int hub_port_status(struct usb_hub *hub, int port1,
} else {
*status = le16_to_cpu(hub->status->port.wPortStatus);
*change = le16_to_cpu(hub->status->port.wPortChange);
+
+ if ((hub->hdev->parent != NULL) &&
+ hub_is_superspeed(hub->hdev)) {
+ /* Translate the USB 3 port status */
+ u16 tmp = *status & USB_SS_PORT_STAT_MASK;
+ if (*status & USB_SS_PORT_STAT_POWER)
+ tmp |= USB_PORT_STAT_POWER;
+ *status = tmp;
+ }
+
ret = 0;
}
mutex_unlock(&hub->status_mutex);
@@ -607,7 +630,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
if (hdev->children[port1-1] && set_state)
usb_set_device_state(hdev->children[port1-1],
USB_STATE_NOTATTACHED);
- if (!hub->error)
+ if (!hub->error && !hub_is_superspeed(hub->hdev))
ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
if (ret)
dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
@@ -616,7 +639,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
}
/*
- * Disable a port and mark a logical connnect-change event, so that some
+ * Disable a port and mark a logical connect-change event, so that some
* time later khubd will disconnect() any existing usb_device on the port
* and will re-enumerate if there actually is a device attached.
*/
@@ -769,12 +792,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
* USB3 protocol ports will automatically transition
* to Enabled state when detect an USB3.0 device attach.
* Do not disable USB3 protocol ports.
- * FIXME: USB3 root hub and external hubs are treated
- * differently here.
*/
- if (hdev->descriptor.bDeviceProtocol != 3 ||
- (!hdev->parent &&
- !(portstatus & USB_PORT_STAT_SUPER_SPEED))) {
+ if (!hub_is_superspeed(hdev)) {
clear_port_feature(hdev, port1,
USB_PORT_FEAT_ENABLE);
portstatus &= ~USB_PORT_STAT_ENABLE;
@@ -795,6 +814,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
}
+ if (portchange & USB_PORT_STAT_C_LINK_STATE) {
+ need_debounce_delay = true;
+ clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_PORT_LINK_STATE);
+ }
/* We can forget about a "removed" device when there's a
* physical disconnect or the connect status changes.
@@ -964,12 +988,23 @@ static int hub_configure(struct usb_hub *hub,
goto fail;
}
+ if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
+ ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+ HUB_SET_DEPTH, USB_RT_HUB,
+ hdev->level - 1, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+
+ if (ret < 0) {
+ message = "can't set hub depth";
+ goto fail;
+ }
+ }
+
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.
*/
- ret = get_hub_descriptor(hdev, hub->descriptor,
- sizeof(*hub->descriptor));
+ ret = get_hub_descriptor(hdev, hub->descriptor);
if (ret < 0) {
message = "can't read hub descriptor";
goto fail;
@@ -991,12 +1026,14 @@ static int hub_configure(struct usb_hub *hub,
wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
- if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
+ /* FIXME for USB 3.0, skip for now */
+ if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
+ !(hub_is_superspeed(hdev))) {
int i;
char portstr [USB_MAXCHILDREN + 1];
for (i = 0; i < hdev->maxchild; i++)
- portstr[i] = hub->descriptor->DeviceRemovable
+ portstr[i] = hub->descriptor->u.hs.DeviceRemovable
[((i + 1) / 8)] & (1 << ((i + 1) % 8))
? 'F' : 'R';
portstr[hdev->maxchild] = 0;
@@ -1253,8 +1290,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
- /* Hubs have proper suspend/resume support */
- usb_enable_autosuspend(hdev);
+ /* Hubs have proper suspend/resume support. USB 3.0 device suspend is
+ * different from USB 2.0/1.1 device suspend, and unfortunately we
+ * don't support it yet. So leave autosuspend disabled for USB 3.0
+ * external hubs for now. Enable autosuspend for USB 3.0 roothubs,
+ * since that isn't a "real" hub.
+ */
+ if (!hub_is_superspeed(hdev) || !hdev->parent)
+ usb_enable_autosuspend(hdev);
if (hdev->level == MAX_TOPO_LEVEL) {
dev_err(&intf->dev,
@@ -1501,6 +1544,13 @@ void usb_set_device_state(struct usb_device *udev,
EXPORT_SYMBOL_GPL(usb_set_device_state);
/*
+ * Choose a device number.
+ *
+ * Device numbers are used as filenames in usbfs. On USB-1.1 and
+ * USB-2.0 buses they are also used as device addresses, however on
+ * USB-3.0 buses the address is assigned by the controller hardware
+ * and it usually is not the same as the device number.
+ *
* WUSB devices are simple: they have no hubs behind, so the mapping
* device <-> virtual port number becomes 1:1. Why? to simplify the
* life of the device connection logic in
@@ -1522,7 +1572,7 @@ EXPORT_SYMBOL_GPL(usb_set_device_state);
* the HCD must setup data structures before issuing a set address
* command to the hardware.
*/
-static void choose_address(struct usb_device *udev)
+static void choose_devnum(struct usb_device *udev)
{
int devnum;
struct usb_bus *bus = udev->bus;
@@ -1547,7 +1597,7 @@ static void choose_address(struct usb_device *udev)
}
}
-static void release_address(struct usb_device *udev)
+static void release_devnum(struct usb_device *udev)
{
if (udev->devnum > 0) {
clear_bit(udev->devnum, udev->bus->devmap.devicemap);
@@ -1555,7 +1605,7 @@ static void release_address(struct usb_device *udev)
}
}
-static void update_address(struct usb_device *udev, int devnum)
+static void update_devnum(struct usb_device *udev, int devnum)
{
/* The address for a WUSB device is managed by wusbcore. */
if (!udev->wusb)
@@ -1602,7 +1652,8 @@ void usb_disconnect(struct usb_device **pdev)
* this quiesces everyting except pending urbs.
*/
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
- dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum);
+ dev_info(&udev->dev, "USB disconnect, device number %d\n",
+ udev->devnum);
usb_lock_device(udev);
@@ -1632,7 +1683,7 @@ void usb_disconnect(struct usb_device **pdev)
/* Free the device number and delete the parent's children[]
* (or root_hub) pointer.
*/
- release_address(udev);
+ release_devnum(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
spin_lock_irq(&device_state_lock);
@@ -2017,7 +2068,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
(portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
udev->speed = USB_SPEED_WIRELESS;
- else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+ else if (hub_is_superspeed(hub->hdev))
udev->speed = USB_SPEED_SUPER;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
@@ -2073,7 +2124,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
case 0:
/* TRSTRCY = 10 ms; plus some extra */
msleep(10 + 40);
- update_address(udev, 0);
+ update_devnum(udev, 0);
if (hcd->driver->reset_device) {
status = hcd->driver->reset_device(hcd, udev);
if (status < 0) {
@@ -2636,7 +2687,7 @@ static int hub_set_address(struct usb_device *udev, int devnum)
USB_REQ_SET_ADDRESS, 0, devnum, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
if (retval == 0) {
- update_address(udev, devnum);
+ update_devnum(udev, devnum);
/* Device now using proper address. */
usb_set_device_state(udev, USB_STATE_ADDRESS);
usb_ep0_reinit(udev);
@@ -2741,9 +2792,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
}
if (udev->speed != USB_SPEED_SUPER)
dev_info(&udev->dev,
- "%s %s speed %sUSB device using %s and address %d\n",
+ "%s %s speed %sUSB device number %d using %s\n",
(udev->config) ? "reset" : "new", speed, type,
- udev->bus->controller->driver->name, devnum);
+ devnum, udev->bus->controller->driver->name);
/* Set up TT records, if needed */
if (hdev->tt) {
@@ -2773,10 +2824,6 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
* value.
*/
for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
- /*
- * An xHCI controller cannot send any packets to a device until
- * a set address command successfully completes.
- */
if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
struct usb_device_descriptor *buf;
int r = 0;
@@ -2859,9 +2906,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (udev->speed == USB_SPEED_SUPER) {
devnum = udev->devnum;
dev_info(&udev->dev,
- "%s SuperSpeed USB device using %s and address %d\n",
+ "%s SuperSpeed USB device number %d using %s\n",
(udev->config) ? "reset" : "new",
- udev->bus->controller->driver->name, devnum);
+ devnum, udev->bus->controller->driver->name);
}
/* cope with hardware quirkiness:
@@ -2924,7 +2971,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
fail:
if (retval) {
hub_port_disable(hub, port1, 0);
- update_address(udev, devnum); /* for disconnect processing */
+ update_devnum(udev, devnum); /* for disconnect processing */
}
mutex_unlock(&usb_address0_mutex);
return retval;
@@ -3015,7 +3062,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
dev_dbg (hub_dev,
"port %d, status %04x, change %04x, %s\n",
- port1, portstatus, portchange, portspeed (portstatus));
+ port1, portstatus, portchange, portspeed(hub, portstatus));
if (hub->has_indicators) {
set_port_led(hub, port1, HUB_LED_AUTO);
@@ -3116,32 +3163,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
udev->level = hdev->level + 1;
udev->wusb = hub_is_wusb(hub);
- /*
- * USB 3.0 devices are reset automatically before the connect
- * port status change appears, and the root hub port status
- * shows the correct speed. We also get port change
- * notifications for USB 3.0 devices from the USB 3.0 portion of
- * an external USB 3.0 hub, but this isn't handled correctly yet
- * FIXME.
- */
-
- if (!(hcd->driver->flags & HCD_USB3))
- udev->speed = USB_SPEED_UNKNOWN;
- else if ((hdev->parent == NULL) &&
- (portstatus & USB_PORT_STAT_SUPER_SPEED))
+ /* Only USB 3.0 devices are connected to SuperSpeed hubs. */
+ if (hub_is_superspeed(hub->hdev))
udev->speed = USB_SPEED_SUPER;
else
udev->speed = USB_SPEED_UNKNOWN;
- /*
- * Set the address.
- * Note xHCI needs to issue an address device command later
- * in the hub_port_init sequence for SS/HS/FS/LS devices,
- * and xHC will assign an address to the device. But use
- * kernel assigned address here, to avoid any address conflict
- * issue.
- */
- choose_address(udev);
+ choose_devnum(udev);
if (udev->devnum <= 0) {
status = -ENOTCONN; /* Don't retry */
goto loop;
@@ -3233,7 +3261,7 @@ loop_disable:
hub_port_disable(hub, port1, 1);
loop:
usb_ep0_reinit(udev);
- release_address(udev);
+ release_devnum(udev);
hub_free_dev(udev);
usb_put_dev(udev);
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
@@ -3410,12 +3438,19 @@ static void hub_events(void)
}
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
- dev_err (hub_dev,
- "over-current change on port %d\n",
- i);
+ u16 status = 0;
+ u16 unused;
+
+ dev_dbg(hub_dev, "over-current change on port "
+ "%d\n", i);
clear_port_feature(hdev, i,
USB_PORT_FEAT_C_OVER_CURRENT);
+ msleep(100); /* Cool down */
hub_power_on(hub, true);
+ hub_port_status(hub, i, &status, &unused);
+ if (status & USB_PORT_STAT_OVERCURRENT)
+ dev_err(hub_dev, "over-current "
+ "condition on port %d\n", i);
}
if (portchange & USB_PORT_STAT_C_RESET) {
@@ -3425,6 +3460,25 @@ static void hub_events(void)
clear_port_feature(hdev, i,
USB_PORT_FEAT_C_RESET);
}
+ if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+ hub_is_superspeed(hub->hdev)) {
+ dev_dbg(hub_dev,
+ "warm reset change on port %d\n",
+ i);
+ clear_port_feature(hdev, i,
+ USB_PORT_FEAT_C_BH_PORT_RESET);
+ }
+ if (portchange & USB_PORT_STAT_C_LINK_STATE) {
+ clear_port_feature(hub->hdev, i,
+ USB_PORT_FEAT_C_PORT_LINK_STATE);
+ }
+ if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
+ dev_warn(hub_dev,
+ "config error on port %d\n",
+ i);
+ clear_port_feature(hub->hdev, i,
+ USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
+ }
if (connect_change)
hub_port_connect_change(hub, i,
@@ -3447,10 +3501,17 @@ static void hub_events(void)
hub->limited_power = 0;
}
if (hubchange & HUB_CHANGE_OVERCURRENT) {
- dev_dbg (hub_dev, "overcurrent change\n");
- msleep(500); /* Cool down */
+ u16 status = 0;
+ u16 unused;
+
+ dev_dbg(hub_dev, "over-current change\n");
clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
+ msleep(500); /* Cool down */
hub_power_on(hub, true);
+ hub_hub_status(hub, &status, &unused);
+ if (status & HUB_STATUS_OVERCURRENT)
+ dev_err(hub_dev, "over-current "
+ "condition\n");
}
}
@@ -3699,13 +3760,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
if (!udev->actconfig)
goto done;
- mutex_lock(&hcd->bandwidth_mutex);
+ mutex_lock(hcd->bandwidth_mutex);
ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
if (ret < 0) {
dev_warn(&udev->dev,
"Busted HC? Not enough HCD resources for "
"old configuration.\n");
- mutex_unlock(&hcd->bandwidth_mutex);
+ mutex_unlock(hcd->bandwidth_mutex);
goto re_enumerate;
}
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
@@ -3716,10 +3777,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
dev_err(&udev->dev,
"can't restore configuration #%d (error=%d)\n",
udev->actconfig->desc.bConfigurationValue, ret);
- mutex_unlock(&hcd->bandwidth_mutex);
+ mutex_unlock(hcd->bandwidth_mutex);
goto re_enumerate;
}
- mutex_unlock(&hcd->bandwidth_mutex);
+ mutex_unlock(hcd->bandwidth_mutex);
usb_set_device_state(udev, USB_STATE_CONFIGURED);
/* Put interfaces back into the same altsettings as before.