summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/udc/bdc/bdc.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/udc/bdc/bdc.h')
-rw-r--r--drivers/usb/gadget/udc/bdc/bdc.h490
1 files changed, 490 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
new file mode 100644
index 000000000000..dc18a20bf040
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -0,0 +1,490 @@
+/*
+ * bdc.h - header for the BRCM BDC USB3.0 device controller
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_BDC_H__
+#define __LINUX_BDC_H__
+
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/debugfs.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <asm/unaligned.h>
+
+#define BRCM_BDC_NAME "bdc_usb3"
+#define BRCM_BDC_DESC "BDC device controller driver"
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+/* BDC command operation timeout in usec*/
+#define BDC_CMD_TIMEOUT 1000
+/* BDC controller operation timeout in usec*/
+#define BDC_COP_TIMEOUT 500
+
+/*
+ * Maximum size of ep0 response buffer for ch9 requests,
+ * the set_sel request uses 6 so far, the max.
+*/
+#define EP0_RESPONSE_BUFF 6
+/* Start with SS as default */
+#define EP0_MAX_PKT_SIZE 512
+
+/* 64 entries in a SRR */
+#define NUM_SR_ENTRIES 64
+
+/* Num of bds per table */
+#define NUM_BDS_PER_TABLE 32
+
+/* Num of tables in bd list for control,bulk and Int ep */
+#define NUM_TABLES 2
+
+/* Num of tables in bd list for Isoch ep */
+#define NUM_TABLES_ISOCH 6
+
+/* U1 Timeout default: 248usec */
+#define U1_TIMEOUT 0xf8
+
+/* Interrupt coalescence in usec */
+#define INT_CLS 500
+
+/* Register offsets */
+/* Configuration and Capability registers */
+#define BDC_BDCCFG0 0x00
+#define BDC_BDCCFG1 0x04
+#define BDC_BDCCAP0 0x08
+#define BDC_BDCCAP1 0x0c
+#define BDC_CMDPAR0 0x10
+#define BDC_CMDPAR1 0x14
+#define BDC_CMDPAR2 0x18
+#define BDC_CMDSC 0x1c
+#define BDC_USPC 0x20
+#define BDC_USPPMS 0x28
+#define BDC_USPPM2 0x2c
+#define BDC_SPBBAL 0x38
+#define BDC_SPBBAH 0x3c
+#define BDC_BDCSC 0x40
+#define BDC_XSFNTF 0x4c
+
+#define BDC_DVCSA 0x50
+#define BDC_DVCSB 0x54
+#define BDC_EPSTS0(n) (0x60 + (n * 0x10))
+#define BDC_EPSTS1(n) (0x64 + (n * 0x10))
+#define BDC_EPSTS2(n) (0x68 + (n * 0x10))
+#define BDC_EPSTS3(n) (0x6c + (n * 0x10))
+#define BDC_EPSTS4(n) (0x70 + (n * 0x10))
+#define BDC_EPSTS5(n) (0x74 + (n * 0x10))
+#define BDC_EPSTS6(n) (0x78 + (n * 0x10))
+#define BDC_EPSTS7(n) (0x7c + (n * 0x10))
+#define BDC_SRRBAL(n) (0x200 + (n * 0x10))
+#define BDC_SRRBAH(n) (0x204 + (n * 0x10))
+#define BDC_SRRINT(n) (0x208 + (n * 0x10))
+#define BDC_INTCTLS(n) (0x20c + (n * 0x10))
+
+/* Extended capability regs */
+#define BDC_FSCNOC 0xcd4
+#define BDC_FSCNIC 0xce4
+#define NUM_NCS(p) (p >> 28)
+
+/* Register bit fields and Masks */
+/* BDC Configuration 0 */
+#define BDC_PGS(p) (((p) & (0x7 << 8)) >> 8)
+#define BDC_SPB(p) (p & 0x7)
+
+/* BDC Capability1 */
+#define BDC_P64 (1 << 0)
+
+/* BDC Command register */
+#define BDC_CMD_FH 0xe
+#define BDC_CMD_DNC 0x6
+#define BDC_CMD_EPO 0x4
+#define BDC_CMD_BLA 0x3
+#define BDC_CMD_EPC 0x2
+#define BDC_CMD_DVC 0x1
+#define BDC_CMD_CWS (0x1 << 5)
+#define BDC_CMD_CST(p) (((p) & (0xf << 6))>>6)
+#define BDC_CMD_EPN(p) ((p & 0x1f) << 10)
+#define BDC_SUB_CMD_ADD (0x1 << 17)
+#define BDC_SUB_CMD_FWK (0x4 << 17)
+/* Reset sequence number */
+#define BDC_CMD_EPO_RST_SN (0x1 << 16)
+#define BDC_CMD_EP0_XSD (0x1 << 16)
+#define BDC_SUB_CMD_ADD_EP (0x1 << 17)
+#define BDC_SUB_CMD_DRP_EP (0x2 << 17)
+#define BDC_SUB_CMD_EP_STP (0x2 << 17)
+#define BDC_SUB_CMD_EP_STL (0x4 << 17)
+#define BDC_SUB_CMD_EP_RST (0x1 << 17)
+#define BDC_CMD_SRD (1 << 27)
+
+/* CMD completion status */
+#define BDC_CMDS_SUCC 0x1
+#define BDC_CMDS_PARA 0x3
+#define BDC_CMDS_STAT 0x4
+#define BDC_CMDS_FAIL 0x5
+#define BDC_CMDS_INTL 0x6
+#define BDC_CMDS_BUSY 0xf
+
+/* CMDSC Param 2 shifts */
+#define EPT_SHIFT 22
+#define MP_SHIFT 10
+#define MB_SHIFT 6
+#define EPM_SHIFT 4
+
+/* BDC USPSC */
+#define BDC_VBC (1 << 31)
+#define BDC_PRC (1 << 30)
+#define BDC_PCE (1 << 29)
+#define BDC_CFC (1 << 28)
+#define BDC_PCC (1 << 27)
+#define BDC_PSC (1 << 26)
+#define BDC_VBS (1 << 25)
+#define BDC_PRS (1 << 24)
+#define BDC_PCS (1 << 23)
+#define BDC_PSP(p) (((p) & (0x7 << 20))>>20)
+#define BDC_SCN (1 << 8)
+#define BDC_SDC (1 << 7)
+#define BDC_SWS (1 << 4)
+
+#define BDC_USPSC_RW (BDC_SCN|BDC_SDC|BDC_SWS|0xf)
+#define BDC_PSP(p) (((p) & (0x7 << 20))>>20)
+
+#define BDC_SPEED_FS 0x1
+#define BDC_SPEED_LS 0x2
+#define BDC_SPEED_HS 0x3
+#define BDC_SPEED_SS 0x4
+
+#define BDC_PST(p) (p & 0xf)
+#define BDC_PST_MASK 0xf
+
+/* USPPMS */
+#define BDC_U2E (0x1 << 31)
+#define BDC_U1E (0x1 << 30)
+#define BDC_U2A (0x1 << 29)
+#define BDC_PORT_W1S (0x1 << 17)
+#define BDC_U1T(p) ((p) & 0xff)
+#define BDC_U2T(p) (((p) & 0xff) << 8)
+#define BDC_U1T_MASK 0xff
+
+/* USBPM2 */
+/* Hardware LPM Enable */
+#define BDC_HLE (1 << 16)
+
+/* BDC Status and Control */
+#define BDC_COP_RST (1 << 29)
+#define BDC_COP_RUN (2 << 29)
+#define BDC_COP_STP (4 << 29)
+
+#define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP)
+
+#define BDC_COS (1 << 28)
+#define BDC_CSTS(p) (((p) & (0x7 << 20)) >> 20)
+#define BDC_MASK_MCW (1 << 7)
+#define BDC_GIE (1 << 1)
+#define BDC_GIP (1 << 0)
+
+#define BDC_HLT 1
+#define BDC_NOR 2
+#define BDC_OIP 7
+
+/* Buffer descriptor and Status report bit fields and masks */
+#define BD_TYPE_BITMASK (0xf)
+#define BD_CHAIN 0xf
+
+#define BD_TFS_SHIFT 4
+#define BD_SOT (1 << 26)
+#define BD_EOT (1 << 27)
+#define BD_ISP (1 << 29)
+#define BD_IOC (1 << 30)
+#define BD_SBF (1 << 31)
+
+#define BD_INTR_TARGET(p) (((p) & 0x1f) << 27)
+
+#define BDC_SRR_RWS (1 << 4)
+#define BDC_SRR_RST (1 << 3)
+#define BDC_SRR_ISR (1 << 2)
+#define BDC_SRR_IE (1 << 1)
+#define BDC_SRR_IP (1 << 0)
+#define BDC_SRR_EPI(p) (((p) & (0xff << 24)) >> 24)
+#define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16)
+#define BDC_SRR_DPI_MASK 0x00ff0000
+
+#define MARK_CHAIN_BD (BD_CHAIN|BD_EOT|BD_SOT)
+
+/* Control transfer BD specific fields */
+#define BD_DIR_IN (1 << 25)
+
+#define BDC_PTC_MASK 0xf0000000
+
+/* status report defines */
+#define SR_XSF 0
+#define SR_USPC 4
+#define SR_BD_LEN(p) (p & 0xffffff)
+
+#define XSF_SUCC 0x1
+#define XSF_SHORT 0x3
+#define XSF_BABB 0x4
+#define XSF_SETUP_RECV 0x6
+#define XSF_DATA_START 0x7
+#define XSF_STATUS_START 0x8
+
+#define XSF_STS(p) (((p) >> 28) & 0xf)
+
+/* Transfer BD fields */
+#define BD_LEN(p) ((p) & 0x1ffff)
+#define BD_LTF (1 << 25)
+#define BD_TYPE_DS 0x1
+#define BD_TYPE_SS 0x2
+
+#define BDC_EP_ENABLED (1 << 0)
+#define BDC_EP_STALL (1 << 1)
+#define BDC_EP_STOP (1 << 2)
+
+/* One BD can transfer max 65536 bytes */
+#define BD_MAX_BUFF_SIZE (1 << 16)
+/* Maximum bytes in one XFR, Refer to BDC spec */
+#define MAX_XFR_LEN 16777215
+
+/* defines for Force Header command */
+#define DEV_NOTF_TYPE 6
+#define FWK_SUBTYPE 1
+#define TRA_PACKET 4
+
+#define to_bdc_ep(e) container_of(e, struct bdc_ep, usb_ep)
+#define to_bdc_req(r) container_of(r, struct bdc_req, usb_req)
+#define gadget_to_bdc(g) container_of(g, struct bdc, gadget)
+
+/* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */
+#define BDC_TNOTIFY 2500 /*in ms*/
+/* Devstatus bitfields */
+#define REMOTE_WAKEUP_ISSUED (1 << 16)
+#define DEVICE_SUSPENDED (1 << 17)
+#define FUNC_WAKE_ISSUED (1 << 18)
+#define REMOTE_WAKE_ENABLE (1 << USB_DEVICE_REMOTE_WAKEUP)
+
+/* On disconnect, preserve these bits and clear rest */
+#define DEVSTATUS_CLEAR (1 << USB_DEVICE_SELF_POWERED)
+/* Hardware and software Data structures */
+
+/* Endpoint bd: buffer descriptor */
+struct bdc_bd {
+ __le32 offset[4];
+};
+
+/* Status report in Status report ring(srr) */
+struct bdc_sr {
+ __le32 offset[4];
+};
+
+/* bd_table: contigous bd's in a table */
+struct bd_table {
+ struct bdc_bd *start_bd;
+ /* dma address of start bd of table*/
+ dma_addr_t dma;
+};
+
+/*
+ * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd
+ * table's chained to each other through a chain bd, every table has equal
+ * number of bds. the software uses bdi(bd index) to refer to particular bd in
+ * the list.
+ */
+struct bd_list {
+ /* Array of bd table pointers*/
+ struct bd_table **bd_table_array;
+ /* How many tables chained to each other */
+ int num_tabs;
+ /* Max_bdi = num_tabs * num_bds_table - 1 */
+ int max_bdi;
+ /* current enq bdi from sw point of view */
+ int eqp_bdi;
+ /* current deq bdi from sw point of view */
+ int hwd_bdi;
+ /* numbers of bds per table */
+ int num_bds_table;
+};
+
+struct bdc_req;
+
+/* Representation of a transfer, one transfer can have multiple bd's */
+struct bd_transfer {
+ struct bdc_req *req;
+ /* start bd index */
+ int start_bdi;
+ /* this will be the next hw dqp when this transfer completes */
+ int next_hwd_bdi;
+ /* number of bds in this transfer */
+ int num_bds;
+};
+
+/*
+ * Representation of a gadget request, every gadget request is contained
+ * by 1 bd_transfer.
+ */
+struct bdc_req {
+ struct usb_request usb_req;
+ struct list_head queue;
+ struct bdc_ep *ep;
+ /* only one Transfer per request */
+ struct bd_transfer bd_xfr;
+ int epnum;
+};
+
+/* scratchpad buffer needed by bdc hardware */
+struct bdc_scratchpad {
+ dma_addr_t sp_dma;
+ void *buff;
+ u32 size;
+};
+
+/* endpoint representation */
+struct bdc_ep {
+ struct usb_ep usb_ep;
+ struct list_head queue;
+ struct bdc *bdc;
+ u8 ep_type;
+ u8 dir;
+ u8 ep_num;
+ const struct usb_ss_ep_comp_descriptor *comp_desc;
+ const struct usb_endpoint_descriptor *desc;
+ unsigned int flags;
+ char name[20];
+ /* endpoint bd list*/
+ struct bd_list bd_list;
+ /*
+ * HW generates extra event for multi bd tranfers, this flag helps in
+ * ignoring the extra event
+ */
+ bool ignore_next_sr;
+};
+
+/* bdc cmmand parameter structure */
+struct bdc_cmd_params {
+ u32 param2;
+ u32 param1;
+ u32 param0;
+};
+
+/* status report ring(srr), currently one srr is supported for entire system */
+struct srr {
+ struct bdc_sr *sr_bds;
+ u16 eqp_index;
+ u16 dqp_index;
+ dma_addr_t dma_addr;
+};
+
+/* EP0 states */
+enum bdc_ep0_state {
+ WAIT_FOR_SETUP = 0,
+ WAIT_FOR_DATA_START,
+ WAIT_FOR_DATA_XMIT,
+ WAIT_FOR_STATUS_START,
+ WAIT_FOR_STATUS_XMIT,
+ STATUS_PENDING
+};
+
+/* Link states */
+enum bdc_link_state {
+ BDC_LINK_STATE_U0 = 0x00,
+ BDC_LINK_STATE_U3 = 0x03,
+ BDC_LINK_STATE_RX_DET = 0x05,
+ BDC_LINK_STATE_RESUME = 0x0f
+};
+
+/* representation of bdc */
+struct bdc {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *gadget_driver;
+ struct device *dev;
+ /* device lock */
+ spinlock_t lock;
+
+ /* num of endpoints for a particular instantiation of IP */
+ unsigned int num_eps;
+ /*
+ * Array of ep's, it uses the same index covention as bdc hw i.e.
+ * 1 for ep0, 2 for 1out,3 for 1in ....
+ */
+ struct bdc_ep **bdc_ep_array;
+ void __iomem *regs;
+ struct bdc_scratchpad scratchpad;
+ u32 sp_buff_size;
+ /* current driver supports 1 status ring */
+ struct srr srr;
+ /* Last received setup packet */
+ struct usb_ctrlrequest setup_pkt;
+ struct bdc_req ep0_req;
+ struct bdc_req status_req;
+ enum bdc_ep0_state ep0_state;
+ bool delayed_status;
+ bool zlp_needed;
+ bool reinit;
+ bool pullup;
+ /* Bits 0-15 are standard and 16-31 for proprietary information */
+ u32 devstatus;
+ int irq;
+ void *mem;
+ u32 dev_addr;
+ /* DMA pools */
+ struct dma_pool *bd_table_pool;
+ u8 test_mode;
+ /* array of callbacks for various status report handlers */
+ void (*sr_handler[2])(struct bdc *, struct bdc_sr *);
+ /* ep0 callback handlers */
+ void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *);
+ /* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */
+ unsigned char ep0_response_buff[EP0_RESPONSE_BUFF];
+ /*
+ * Timer to check if host resumed transfer after bdc sent Func wake
+ * notification packet after a remote wakeup. if not, then resend the
+ * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4
+ */
+ struct delayed_work func_wake_notify;
+};
+
+static inline u32 bdc_readl(void __iomem *base, u32 offset)
+{
+ return readl(base + offset);
+}
+
+static inline void bdc_writel(void __iomem *base, u32 offset, u32 value)
+{
+ writel(value, base + offset);
+}
+
+/* Buffer descriptor list operations */
+void bdc_notify_xfr(struct bdc *, u32);
+void bdc_softconn(struct bdc *);
+void bdc_softdisconn(struct bdc *);
+int bdc_run(struct bdc *);
+int bdc_stop(struct bdc *);
+int bdc_reset(struct bdc *);
+int bdc_udc_init(struct bdc *);
+void bdc_udc_exit(struct bdc *);
+int bdc_reinit(struct bdc *);
+
+/* Status report handlers */
+/* Upstream port status change sr */
+void bdc_sr_uspc(struct bdc *, struct bdc_sr *);
+/* transfer sr */
+void bdc_sr_xsf(struct bdc *, struct bdc_sr *);
+/* EP0 XSF handlers */
+void bdc_xsf_ep0_setup_recv(struct bdc *, struct bdc_sr *);
+void bdc_xsf_ep0_data_start(struct bdc *, struct bdc_sr *);
+void bdc_xsf_ep0_status_start(struct bdc *, struct bdc_sr *);
+
+#endif /* __LINUX_BDC_H__ */