summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/udc/bdc/bdc_udc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/udc/bdc/bdc_udc.c')
-rw-r--r--drivers/usb/gadget/udc/bdc/bdc_udc.c587
1 files changed, 587 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c
new file mode 100644
index 000000000000..3700ce70b0be
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c
@@ -0,0 +1,587 @@
+/*
+ * bdc_udc.c - BRCM BDC USB3.0 device controller gagdet ops
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ *
+ * Based on drivers under drivers/usb/gadget/udc/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/unaligned.h>
+#include <linux/platform_device.h>
+
+#include "bdc.h"
+#include "bdc_ep.h"
+#include "bdc_cmd.h"
+#include "bdc_dbg.h"
+
+static const struct usb_gadget_ops bdc_gadget_ops;
+
+static const char * const conn_speed_str[] = {
+ "Not connected",
+ "Full Speed",
+ "Low Speed",
+ "High Speed",
+ "Super Speed",
+};
+
+/* EP0 initial descripror */
+static struct usb_endpoint_descriptor bdc_gadget_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .bEndpointAddress = 0,
+ .wMaxPacketSize = cpu_to_le16(EP0_MAX_PKT_SIZE),
+};
+
+/* Advance the srr dqp maintained by SW */
+static void srr_dqp_index_advc(struct bdc *bdc, u32 srr_num)
+{
+ struct srr *srr;
+
+ srr = &bdc->srr;
+ dev_dbg_ratelimited(bdc->dev, "srr->dqp_index:%d\n", srr->dqp_index);
+ srr->dqp_index++;
+ /* rollback to 0 if we are past the last */
+ if (srr->dqp_index == NUM_SR_ENTRIES)
+ srr->dqp_index = 0;
+}
+
+/* connect sr */
+static void bdc_uspc_connected(struct bdc *bdc)
+{
+ u32 speed, temp;
+ u32 usppms;
+ int ret;
+
+ temp = bdc_readl(bdc->regs, BDC_USPC);
+ speed = BDC_PSP(temp);
+ dev_dbg(bdc->dev, "%s speed=%x\n", __func__, speed);
+ switch (speed) {
+ case BDC_SPEED_SS:
+ bdc_gadget_ep0_desc.wMaxPacketSize =
+ cpu_to_le16(EP0_MAX_PKT_SIZE);
+ bdc->gadget.ep0->maxpacket = EP0_MAX_PKT_SIZE;
+ bdc->gadget.speed = USB_SPEED_SUPER;
+ /* Enable U1T in SS mode */
+ usppms = bdc_readl(bdc->regs, BDC_USPPMS);
+ usppms &= ~BDC_U1T(0xff);
+ usppms |= BDC_U1T(U1_TIMEOUT);
+ usppms |= BDC_PORT_W1S;
+ bdc_writel(bdc->regs, BDC_USPPMS, usppms);
+ break;
+
+ case BDC_SPEED_HS:
+ bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+ bdc->gadget.ep0->maxpacket = 64;
+ bdc->gadget.speed = USB_SPEED_HIGH;
+ break;
+
+ case BDC_SPEED_FS:
+ bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
+ bdc->gadget.ep0->maxpacket = 64;
+ bdc->gadget.speed = USB_SPEED_FULL;
+ break;
+
+ case BDC_SPEED_LS:
+ bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
+ bdc->gadget.ep0->maxpacket = 8;
+ bdc->gadget.speed = USB_SPEED_LOW;
+ break;
+ default:
+ dev_err(bdc->dev, "UNDEFINED SPEED\n");
+ return;
+ }
+ dev_dbg(bdc->dev, "connected at %s\n", conn_speed_str[speed]);
+ /* Now we know the speed, configure ep0 */
+ bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc;
+ ret = bdc_config_ep(bdc, bdc->bdc_ep_array[1]);
+ if (ret)
+ dev_err(bdc->dev, "EP0 config failed\n");
+ bdc->bdc_ep_array[1]->usb_ep.desc = &bdc_gadget_ep0_desc;
+ bdc->bdc_ep_array[1]->flags |= BDC_EP_ENABLED;
+ usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT);
+}
+
+/* device got disconnected */
+static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit)
+{
+ struct bdc_ep *ep;
+
+ dev_dbg(bdc->dev, "%s\n", __func__);
+ /*
+ * Only stop ep0 from here, rest of the endpoints will be disabled
+ * from gadget_disconnect
+ */
+ ep = bdc->bdc_ep_array[1];
+ if (ep && (ep->flags & BDC_EP_ENABLED))
+ /* if enabled then stop and remove requests */
+ bdc_ep_disable(ep);
+
+ if (bdc->gadget_driver && bdc->gadget_driver->disconnect) {
+ spin_unlock(&bdc->lock);
+ bdc->gadget_driver->disconnect(&bdc->gadget);
+ spin_lock(&bdc->lock);
+ }
+ /* Set Unknown speed */
+ bdc->gadget.speed = USB_SPEED_UNKNOWN;
+ bdc->devstatus &= DEVSTATUS_CLEAR;
+ bdc->delayed_status = false;
+ bdc->reinit = reinit;
+ bdc->test_mode = false;
+}
+
+/* TNotify wkaeup timer */
+static void bdc_func_wake_timer(struct work_struct *work)
+{
+ struct bdc *bdc = container_of(work, struct bdc, func_wake_notify.work);
+ unsigned long flags;
+
+ dev_dbg(bdc->dev, "%s\n", __func__);
+ spin_lock_irqsave(&bdc->lock, flags);
+ /*
+ * Check if host has started transferring on endpoints
+ * FUNC_WAKE_ISSUED is cleared when transfer has started after resume
+ */
+ if (bdc->devstatus & FUNC_WAKE_ISSUED) {
+ dev_dbg(bdc->dev, "FUNC_WAKE_ISSUED FLAG IS STILL SET\n");
+ /* flag is still set, so again send func wake */
+ bdc_function_wake_fh(bdc, 0);
+ schedule_delayed_work(&bdc->func_wake_notify,
+ msecs_to_jiffies(BDC_TNOTIFY));
+ }
+ spin_unlock_irqrestore(&bdc->lock, flags);
+}
+
+/* handler for Link state change condition */
+static void handle_link_state_change(struct bdc *bdc, u32 uspc)
+{
+ u32 link_state;
+
+ dev_dbg(bdc->dev, "Link state change");
+ link_state = BDC_PST(uspc);
+ switch (link_state) {
+ case BDC_LINK_STATE_U3:
+ if ((bdc->gadget.speed != USB_SPEED_UNKNOWN) &&
+ bdc->gadget_driver->suspend) {
+ dev_dbg(bdc->dev, "Entered Suspend mode\n");
+ spin_unlock(&bdc->lock);
+ bdc->devstatus |= DEVICE_SUSPENDED;
+ bdc->gadget_driver->suspend(&bdc->gadget);
+ spin_lock(&bdc->lock);
+ }
+ break;
+ case BDC_LINK_STATE_U0:
+ if (bdc->devstatus & REMOTE_WAKEUP_ISSUED) {
+ bdc->devstatus &= ~REMOTE_WAKEUP_ISSUED;
+ if (bdc->gadget.speed == USB_SPEED_SUPER) {
+ bdc_function_wake_fh(bdc, 0);
+ bdc->devstatus |= FUNC_WAKE_ISSUED;
+ /*
+ * Start a Notification timer and check if the
+ * Host transferred anything on any of the EPs,
+ * if not then send function wake again every
+ * TNotification secs until host initiates
+ * transfer to BDC, USB3 spec Table 8.13
+ */
+ schedule_delayed_work(
+ &bdc->func_wake_notify,
+ msecs_to_jiffies(BDC_TNOTIFY));
+ dev_dbg(bdc->dev, "sched func_wake_notify\n");
+ }
+ }
+ break;
+
+ case BDC_LINK_STATE_RESUME:
+ dev_dbg(bdc->dev, "Resumed from Suspend\n");
+ if (bdc->devstatus & DEVICE_SUSPENDED) {
+ bdc->gadget_driver->resume(&bdc->gadget);
+ bdc->devstatus &= ~DEVICE_SUSPENDED;
+ }
+ break;
+ default:
+ dev_dbg(bdc->dev, "link state:%d\n", link_state);
+ }
+}
+
+/* something changes on upstream port, handle it here */
+void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport)
+{
+ u32 clear_flags = 0;
+ u32 uspc;
+ bool connected = false;
+ bool disconn = false;
+
+ uspc = bdc_readl(bdc->regs, BDC_USPC);
+ dev_dbg(bdc->dev, "%s uspc=0x%08x\n", __func__, uspc);
+
+ /* Port connect changed */
+ if (uspc & BDC_PCC) {
+ /* Vbus not present, and not connected to Downstream port */
+ if ((uspc & BDC_VBC) && !(uspc & BDC_VBS) && !(uspc & BDC_PCS))
+ disconn = true;
+ else if ((uspc & BDC_PCS) && !BDC_PST(uspc))
+ connected = true;
+ }
+
+ /* Change in VBus and VBus is present */
+ if ((uspc & BDC_VBC) && (uspc & BDC_VBS)) {
+ if (bdc->pullup) {
+ dev_dbg(bdc->dev, "Do a softconnect\n");
+ /* Attached state, do a softconnect */
+ bdc_softconn(bdc);
+ usb_gadget_set_state(&bdc->gadget, USB_STATE_POWERED);
+ }
+ clear_flags = BDC_VBC;
+ } else if ((uspc & BDC_PRS) || (uspc & BDC_PRC) || disconn) {
+ /* Hot reset, warm reset, 2.0 bus reset or disconn */
+ dev_dbg(bdc->dev, "Port reset or disconn\n");
+ bdc_uspc_disconnected(bdc, disconn);
+ clear_flags = BDC_PCC|BDC_PCS|BDC_PRS|BDC_PRC;
+ } else if ((uspc & BDC_PSC) && (uspc & BDC_PCS)) {
+ /* Change in Link state */
+ handle_link_state_change(bdc, uspc);
+ clear_flags = BDC_PSC|BDC_PCS;
+ }
+
+ /*
+ * In SS we might not have PRC bit set before connection, but in 2.0
+ * the PRC bit is set before connection, so moving this condition out
+ * of bus reset to handle both SS/2.0 speeds.
+ */
+ if (connected) {
+ /* This is the connect event for U0/L0 */
+ dev_dbg(bdc->dev, "Connected\n");
+ bdc_uspc_connected(bdc);
+ bdc->devstatus &= ~(DEVICE_SUSPENDED);
+ }
+ uspc = bdc_readl(bdc->regs, BDC_USPC);
+ uspc &= (~BDC_USPSC_RW);
+ dev_dbg(bdc->dev, "uspc=%x\n", uspc);
+ bdc_writel(bdc->regs, BDC_USPC, clear_flags);
+}
+
+/* Main interrupt handler for bdc */
+static irqreturn_t bdc_udc_interrupt(int irq, void *_bdc)
+{
+ u32 eqp_index, dqp_index, sr_type, srr_int;
+ struct bdc_sr *sreport;
+ struct bdc *bdc = _bdc;
+ u32 status;
+ int ret;
+
+ spin_lock(&bdc->lock);
+ status = bdc_readl(bdc->regs, BDC_BDCSC);
+ if (!(status & BDC_GIP)) {
+ spin_unlock(&bdc->lock);
+ return IRQ_NONE;
+ }
+ srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+ /* Check if the SRR IP bit it set? */
+ if (!(srr_int & BDC_SRR_IP)) {
+ dev_warn(bdc->dev, "Global irq pending but SRR IP is 0\n");
+ spin_unlock(&bdc->lock);
+ return IRQ_NONE;
+ }
+ eqp_index = BDC_SRR_EPI(srr_int);
+ dqp_index = BDC_SRR_DPI(srr_int);
+ dev_dbg(bdc->dev,
+ "%s eqp_index=%d dqp_index=%d srr.dqp_index=%d\n\n",
+ __func__, eqp_index, dqp_index, bdc->srr.dqp_index);
+
+ /* check for ring empty condition */
+ if (eqp_index == dqp_index) {
+ dev_dbg(bdc->dev, "SRR empty?\n");
+ spin_unlock(&bdc->lock);
+ return IRQ_HANDLED;
+ }
+
+ while (bdc->srr.dqp_index != eqp_index) {
+ sreport = &bdc->srr.sr_bds[bdc->srr.dqp_index];
+ /* sreport is read before using it */
+ rmb();
+ sr_type = le32_to_cpu(sreport->offset[3]) & BD_TYPE_BITMASK;
+ dev_dbg_ratelimited(bdc->dev, "sr_type=%d\n", sr_type);
+ switch (sr_type) {
+ case SR_XSF:
+ bdc->sr_handler[0](bdc, sreport);
+ break;
+
+ case SR_USPC:
+ bdc->sr_handler[1](bdc, sreport);
+ break;
+ default:
+ dev_warn(bdc->dev, "SR:%d not handled\n", sr_type);
+ }
+ /* Advance the srr dqp index */
+ srr_dqp_index_advc(bdc, 0);
+ }
+ /* update the hw dequeue pointer */
+ srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+ srr_int &= ~BDC_SRR_DPI_MASK;
+ srr_int &= ~(BDC_SRR_RWS|BDC_SRR_RST|BDC_SRR_ISR);
+ srr_int |= ((bdc->srr.dqp_index) << 16);
+ srr_int |= BDC_SRR_IP;
+ bdc_writel(bdc->regs, BDC_SRRINT(0), srr_int);
+ srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0));
+ if (bdc->reinit) {
+ ret = bdc_reinit(bdc);
+ if (ret)
+ dev_err(bdc->dev, "err in bdc reinit\n");
+ }
+
+ spin_unlock(&bdc->lock);
+
+ return IRQ_HANDLED;
+}
+
+/* Gadget ops */
+static int bdc_udc_start(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
+{
+ struct bdc *bdc = gadget_to_bdc(gadget);
+ unsigned long flags;
+ int ret = 0;
+
+ dev_dbg(bdc->dev, "%s()\n", __func__);
+ spin_lock_irqsave(&bdc->lock, flags);
+ if (bdc->gadget_driver) {
+ dev_err(bdc->dev, "%s is already bound to %s\n",
+ bdc->gadget.name,
+ bdc->gadget_driver->driver.name);
+ ret = -EBUSY;
+ goto err;
+ }
+ /*
+ * Run the controller from here and when BDC is connected to
+ * Host then driver will receive a USPC SR with VBUS present
+ * and then driver will do a softconnect.
+ */
+ ret = bdc_run(bdc);
+ if (ret) {
+ dev_err(bdc->dev, "%s bdc run fail\n", __func__);
+ goto err;
+ }
+ bdc->gadget_driver = driver;
+ bdc->gadget.dev.driver = &driver->driver;
+err:
+ spin_unlock_irqrestore(&bdc->lock, flags);
+
+ return ret;
+}
+
+static int bdc_udc_stop(struct usb_gadget *gadget)
+{
+ struct bdc *bdc = gadget_to_bdc(gadget);
+ unsigned long flags;
+
+ dev_dbg(bdc->dev, "%s()\n", __func__);
+ spin_lock_irqsave(&bdc->lock, flags);
+ bdc_stop(bdc);
+ bdc->gadget_driver = NULL;
+ bdc->gadget.dev.driver = NULL;
+ spin_unlock_irqrestore(&bdc->lock, flags);
+
+ return 0;
+}
+
+static int bdc_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct bdc *bdc = gadget_to_bdc(gadget);
+ unsigned long flags;
+ u32 uspc;
+
+ dev_dbg(bdc->dev, "%s() is_on:%d\n", __func__, is_on);
+ if (!gadget)
+ return -EINVAL;
+
+ spin_lock_irqsave(&bdc->lock, flags);
+ if (!is_on) {
+ bdc_softdisconn(bdc);
+ bdc->pullup = false;
+ } else {
+ /*
+ * For a self powered device, we need to wait till we receive
+ * a VBUS change and Vbus present event, then if pullup flag
+ * is set, then only we present the Termintation.
+ */
+ bdc->pullup = true;
+ /*
+ * Check if BDC is already connected to Host i.e Vbus=1,
+ * if yes, then present TERM now, this is typical for bus
+ * powered devices.
+ */
+ uspc = bdc_readl(bdc->regs, BDC_USPC);
+ if (uspc & BDC_VBS)
+ bdc_softconn(bdc);
+ }
+ spin_unlock_irqrestore(&bdc->lock, flags);
+
+ return 0;
+}
+
+static int bdc_udc_set_selfpowered(struct usb_gadget *gadget,
+ int is_self)
+{
+ struct bdc *bdc = gadget_to_bdc(gadget);
+ unsigned long flags;
+
+ dev_dbg(bdc->dev, "%s()\n", __func__);
+ spin_lock_irqsave(&bdc->lock, flags);
+ if (!is_self)
+ bdc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
+ else
+ bdc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+
+ spin_unlock_irqrestore(&bdc->lock, flags);
+
+ return 0;
+}
+
+static int bdc_udc_wakeup(struct usb_gadget *gadget)
+{
+ struct bdc *bdc = gadget_to_bdc(gadget);
+ unsigned long flags;
+ u8 link_state;
+ u32 uspc;
+ int ret = 0;
+
+ dev_dbg(bdc->dev,
+ "%s() bdc->devstatus=%08x\n",
+ __func__, bdc->devstatus);
+
+ if (!(bdc->devstatus & REMOTE_WAKE_ENABLE))
+ return -EOPNOTSUPP;
+
+ spin_lock_irqsave(&bdc->lock, flags);
+ uspc = bdc_readl(bdc->regs, BDC_USPC);
+ link_state = BDC_PST(uspc);
+ dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc);
+ if (link_state != BDC_LINK_STATE_U3) {
+ dev_warn(bdc->dev,
+ "can't wakeup from link state %d\n",
+ link_state);
+ ret = -EINVAL;
+ goto out;
+ }
+ if (bdc->gadget.speed == USB_SPEED_SUPER)
+ bdc->devstatus |= REMOTE_WAKEUP_ISSUED;
+
+ uspc &= ~BDC_PST_MASK;
+ uspc &= (~BDC_USPSC_RW);
+ uspc |= BDC_PST(BDC_LINK_STATE_U0);
+ uspc |= BDC_SWS;
+ bdc_writel(bdc->regs, BDC_USPC, uspc);
+ uspc = bdc_readl(bdc->regs, BDC_USPC);
+ link_state = BDC_PST(uspc);
+ dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc);
+out:
+ spin_unlock_irqrestore(&bdc->lock, flags);
+
+ return ret;
+}
+
+static const struct usb_gadget_ops bdc_gadget_ops = {
+ .wakeup = bdc_udc_wakeup,
+ .set_selfpowered = bdc_udc_set_selfpowered,
+ .pullup = bdc_udc_pullup,
+ .udc_start = bdc_udc_start,
+ .udc_stop = bdc_udc_stop,
+};
+
+/* Init the gadget interface and register the udc */
+int bdc_udc_init(struct bdc *bdc)
+{
+ u32 temp;
+ int ret;
+
+ dev_dbg(bdc->dev, "%s()\n", __func__);
+ bdc->gadget.ops = &bdc_gadget_ops;
+ bdc->gadget.max_speed = USB_SPEED_SUPER;
+ bdc->gadget.speed = USB_SPEED_UNKNOWN;
+ bdc->gadget.dev.parent = bdc->dev;
+
+ bdc->gadget.sg_supported = false;
+
+
+ bdc->gadget.name = BRCM_BDC_NAME;
+ ret = devm_request_irq(bdc->dev, bdc->irq, bdc_udc_interrupt,
+ IRQF_SHARED , BRCM_BDC_NAME, bdc);
+ if (ret) {
+ dev_err(bdc->dev,
+ "failed to request irq #%d %d\n",
+ bdc->irq, ret);
+ return ret;
+ }
+
+ ret = bdc_init_ep(bdc);
+ if (ret) {
+ dev_err(bdc->dev, "bdc init ep fail: %d\n", ret);
+ return ret;
+ }
+
+ ret = usb_add_gadget_udc(bdc->dev, &bdc->gadget);
+ if (ret) {
+ dev_err(bdc->dev, "failed to register udc\n");
+ goto err0;
+ }
+ usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED);
+ bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc;
+ /*
+ * Allocate bd list for ep0 only, ep0 will be enabled on connect
+ * status report when the speed is known
+ */
+ ret = bdc_ep_enable(bdc->bdc_ep_array[1]);
+ if (ret) {
+ dev_err(bdc->dev, "fail to enable %s\n",
+ bdc->bdc_ep_array[1]->name);
+ goto err1;
+ }
+ INIT_DELAYED_WORK(&bdc->func_wake_notify, bdc_func_wake_timer);
+ /* Enable Interrupts */
+ temp = bdc_readl(bdc->regs, BDC_BDCSC);
+ temp |= BDC_GIE;
+ bdc_writel(bdc->regs, BDC_BDCSC, temp);
+ return 0;
+err1:
+ usb_del_gadget_udc(&bdc->gadget);
+err0:
+ bdc_free_ep(bdc);
+
+ return ret;
+}
+
+void bdc_udc_exit(struct bdc *bdc)
+{
+ dev_dbg(bdc->dev, "%s()\n", __func__);
+ bdc_ep_disable(bdc->bdc_ep_array[1]);
+ usb_del_gadget_udc(&bdc->gadget);
+ bdc_free_ep(bdc);
+}