diff options
Diffstat (limited to 'drivers/usb/net/pegasus.h')
| -rw-r--r-- | drivers/usb/net/pegasus.h | 308 |
1 files changed, 0 insertions, 308 deletions
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h deleted file mode 100644 index c7aadb413e8c..000000000000 --- a/drivers/usb/net/pegasus.h +++ /dev/null @@ -1,308 +0,0 @@ -/* - * Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - - -#ifndef PEGASUS_DEV - -#define PEGASUS_II 0x80000000 -#define HAS_HOME_PNA 0x40000000 -#define TRUST_LINK_STATUS 0x20000000 - -#define PEGASUS_MTU 1536 -#define RX_SKBS 4 - -#define EPROM_WRITE 0x01 -#define EPROM_READ 0x02 -#define EPROM_DONE 0x04 -#define EPROM_WR_ENABLE 0x10 -#define EPROM_LOAD 0x20 - -#define PHY_DONE 0x80 -#define PHY_READ 0x40 -#define PHY_WRITE 0x20 -#define DEFAULT_GPIO_RESET 0x24 -#define DEFAULT_GPIO_SET 0x26 - -#define PEGASUS_PRESENT 0x00000001 -#define PEGASUS_TX_BUSY 0x00000004 -#define PEGASUS_RX_BUSY 0x00000008 -#define CTRL_URB_RUNNING 0x00000010 -#define CTRL_URB_SLEEP 0x00000020 -#define PEGASUS_UNPLUG 0x00000040 -#define PEGASUS_RX_URB_FAIL 0x00000080 -#define ETH_REGS_CHANGE 0x40000000 -#define ETH_REGS_CHANGED 0x80000000 - -#define RX_MULTICAST 2 -#define RX_PROMISCUOUS 4 - -#define REG_TIMEOUT (HZ) -#define PEGASUS_TX_TIMEOUT (HZ*10) - -#define TX_UNDERRUN 0x80 -#define EXCESSIVE_COL 0x40 -#define LATE_COL 0x20 -#define NO_CARRIER 0x10 -#define LOSS_CARRIER 0x08 -#define JABBER_TIMEOUT 0x04 - -#define LINK_STATUS 0x01 - -#define PEGASUS_REQT_READ 0xc0 -#define PEGASUS_REQT_WRITE 0x40 -#define PEGASUS_REQ_GET_REGS 0xf0 -#define PEGASUS_REQ_SET_REGS 0xf1 -#define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS - -enum pegasus_registers { - EthCtrl0 = 0, - EthCtrl1 = 1, - EthCtrl2 = 2, - EthID = 0x10, - Reg1d = 0x1d, - EpromOffset = 0x20, - EpromData = 0x21, /* 0x21 low, 0x22 high byte */ - EpromCtrl = 0x23, - PhyAddr = 0x25, - PhyData = 0x26, /* 0x26 low, 0x27 high byte */ - PhyCtrl = 0x28, - UsbStst = 0x2a, - EthTxStat0 = 0x2b, - EthTxStat1 = 0x2c, - EthRxStat = 0x2d, - WakeupControl = 0x78, - Reg7b = 0x7b, - Gpio0 = 0x7e, - Gpio1 = 0x7f, - Reg81 = 0x81, -}; - - -typedef struct pegasus { - struct usb_device *usb; - struct usb_interface *intf; - struct net_device *net; - struct net_device_stats stats; - struct mii_if_info mii; - unsigned flags; - unsigned features; - u32 msg_enable; - u32 wolopts; - int dev_index; - int intr_interval; - struct tasklet_struct rx_tl; - struct delayed_work carrier_check; - struct urb *ctrl_urb, *rx_urb, *tx_urb, *intr_urb; - struct sk_buff *rx_pool[RX_SKBS]; - struct sk_buff *rx_skb; - struct usb_ctrlrequest dr; - wait_queue_head_t ctrl_wait; - spinlock_t rx_pool_lock; - int chip; - unsigned char intr_buff[8]; - __u8 tx_buff[PEGASUS_MTU]; - __u8 eth_regs[4]; - __u8 phy; - __u8 gpio_res; -} pegasus_t; - - -struct usb_eth_dev { - char *name; - __u16 vendor; - __u16 device; - __u32 private; /* LSB is gpio reset value */ -}; - -#define VENDOR_3COM 0x0506 -#define VENDOR_ABOCOM 0x07b8 -#define VENDOR_ACCTON 0x083a -#define VENDOR_ADMTEK 0x07a6 -#define VENDOR_AEILAB 0x3334 -#define VENDOR_ALLIEDTEL 0x07c9 -#define VENDOR_ATEN 0x0557 -#define VENDOR_BELKIN 0x050d -#define VENDOR_BILLIONTON 0x08dd -#define VENDOR_COMPAQ 0x049f -#define VENDOR_COREGA 0x07aa -#define VENDOR_DLINK 0x2001 -#define VENDOR_ELCON 0x0db7 -#define VENDOR_ELECOM 0x056e -#define VENDOR_ELSA 0x05cc -#define VENDOR_GIGABYTE 0x1044 -#define VENDOR_HAWKING 0x0e66 -#define VENDOR_HP 0x03f0 -#define VENDOR_IODATA 0x04bb -#define VENDOR_KINGSTON 0x0951 -#define VENDOR_LANEED 0x056e -#define VENDOR_LINKSYS 0x066b -#define VENDOR_LINKSYS2 0x077b -#define VENDOR_MELCO 0x0411 -#define VENDOR_MICROSOFT 0x045e -#define VENDOR_MOBILITY 0x1342 -#define VENDOR_NETGEAR 0x0846 -#define VENDOR_OCT 0x0b39 -#define VENDOR_SMARTBRIDGES 0x08d1 -#define VENDOR_SMC 0x0707 -#define VENDOR_SOHOWARE 0x15e8 -#define VENDOR_SIEMENS 0x067c - - -#else /* PEGASUS_DEV */ - -PEGASUS_DEV( "3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c, - DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) -PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104, - DEFAULT_GPIO_RESET | HAS_HOME_PNA ) -PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004, - DEFAULT_GPIO_RESET | HAS_HOME_PNA ) -PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007, - DEFAULT_GPIO_RESET | HAS_HOME_PNA ) -PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet", - VENDOR_ADMTEK, 0x8511, - DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) -PEGASUS_DEV( "ADMtek ADM8513 \"Pegasus II\" USB Ethernet", - VENDOR_ADMTEK, 0x8513, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet", - VENDOR_ADMTEK, 0x8515, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)", - VENDOR_ADMTEK, 0x0986, - DEFAULT_GPIO_RESET | HAS_HOME_PNA ) -PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, - DEFAULT_GPIO_RESET | PEGASUS_II | TRUST_LINK_STATUS ) -PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987, - DEFAULT_GPIO_RESET | HAS_HOME_PNA ) -PEGASUS_DEV( "iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Corega FEther USB-TX", VENDOR_COREGA, 0x0004, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "Corega FEther USB-TXS", VENDOR_COREGA, 0x000d, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003, - DEFAULT_GPIO_RESET | HAS_HOME_PNA ) -PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002, - DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA ) -PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM, 0x4010, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a, - DEFAULT_GPIO_RESET) -PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005, - DEFAULT_GPIO_RESET | PEGASUS_II) -PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204, - DEFAULT_GPIO_RESET | HAS_HOME_PNA ) -PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206, - DEFAULT_GPIO_RESET | PEGASUS_II) -PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "OCT USB TO Ethernet", VENDOR_OCT, 0x0901, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "SMC 202 USB Ethernet", VENDOR_SMC, 0x0200, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201, - DEFAULT_GPIO_RESET | PEGASUS_II) -PEGASUS_DEV( "SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100, - DEFAULT_GPIO_RESET ) -PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110, - DEFAULT_GPIO_RESET | PEGASUS_II ) -PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001, - DEFAULT_GPIO_RESET | PEGASUS_II ) - - -#endif /* PEGASUS_DEV */ |