summaryrefslogtreecommitdiff
path: root/drivers/usb/storage
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/unusual_devs.h79
1 files changed, 50 insertions, 29 deletions
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a0ed889230aa..45fe3663fa7f 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -401,6 +401,14 @@ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
+UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
+ "Cypress",
+ "Cypress AT2LP",
+ US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
+ 0),
+#endif
+
/* Reported by Simon Levitt <simon@whattf.com>
* This entry needs Sub and Proto fields */
UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
@@ -539,17 +547,6 @@ UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200,
"CD-RW Device",
US_SC_8020, US_PR_CB, NULL, 0),
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
- * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
- * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
- */
-
-UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
- "Kobian Mercury",
- "Binocam DCB-132",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_BULK32),
-
#ifdef CONFIG_USB_STORAGE_USBAT
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
"Shuttle/SCM",
@@ -565,6 +562,16 @@ UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
+ * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
+ */
+UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
+ "Kobian Mercury",
+ "Binocam DCB-132",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_BULK32),
+
/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
"Belkin",
@@ -1304,6 +1311,16 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
+/* Reported by F. Aben <f.aben@option.com>
+ * This device (wrongly) has a vendor-specific device descriptor.
+ * The entry is needed so usb-storage can bind to it's mass-storage
+ * interface as an interface driver */
+UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
+ "Option",
+ "GI 0401 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
@@ -1361,13 +1378,6 @@ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
- "INTOVA",
- "Pixtreme",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/*
* Entry for Jenoptik JD 5200z3
*
@@ -1512,7 +1522,7 @@ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
"Sony Ericsson",
"M600i",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
@@ -1684,6 +1694,16 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
+ * This entry is needed to bypass the ZeroCD mechanism
+ * and to properly load as a modem device.
+ */
+UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000,
+ "Onda ET502HS",
+ "USB MMC Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/
@@ -1696,10 +1716,12 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001,
/*
* Patch by Pete Zaitcev <zaitcev@redhat.com>
* Report by Mark Patton. Red Hat bz#208928.
+ * Added support for rev 0x0002 (Motorola ROKR W5)
+ * by Javier Smaldone <javier@smaldone.com.ar>
*/
-UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0001,
+UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002,
"Motorola",
- "RAZR V3i",
+ "RAZR V3i/ROKR W5",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
@@ -1721,6 +1743,13 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
+/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
+UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
+ "INTOVA",
+ "Pixtreme",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/*
* David Härdeman <david@2gen.com>
* The key makes the SCSI stack print confusing (but harmless) messages
@@ -1745,14 +1774,6 @@ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_CAPACITY_HEURISTICS),
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
- "Cypress",
- "Cypress AT2LP",
- US_SC_CYP_ATACB, US_PR_BULK, NULL,
- 0),
-#endif
-
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),