summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/core/Kconfig6
-rw-r--r--drivers/usb/core/file.c35
-rw-r--r--drivers/usb/core/message.c1
-rw-r--r--drivers/usb/host/ehci-pci.c5
-rw-r--r--drivers/usb/musb/cppi_dma.c1
-rw-r--r--drivers/usb/musb/musb_debugfs.c5
-rw-r--r--drivers/usb/musb/musb_gadget.c75
-rw-r--r--drivers/usb/musb/musb_gadget.h2
-rw-r--r--drivers/usb/musb/musb_gadget_ep0.c9
-rw-r--r--drivers/usb/musb/musb_host.c6
-rw-r--r--drivers/usb/otg/twl4030-usb.c78
-rw-r--r--drivers/usb/serial/mos7720.c3
-rw-r--r--drivers/usb/serial/mos7840.c3
13 files changed, 141 insertions, 88 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 7e594449600e..9eed5b52d9de 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -91,12 +91,12 @@ config USB_DYNAMIC_MINORS
If you are unsure about this, say N here.
config USB_SUSPEND
- bool "USB runtime power management (suspend/resume and wakeup)"
+ bool "USB runtime power management (autosuspend) and wakeup"
depends on USB && PM_RUNTIME
help
If you say Y here, you can use driver calls or the sysfs
- "power/level" file to suspend or resume individual USB
- peripherals and to enable or disable autosuspend (see
+ "power/control" file to enable or disable autosuspend for
+ individual USB peripherals (see
Documentation/usb/power-management.txt for more details).
Also, USB "remote wakeup" signaling is supported, whereby some
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index f06f5dbc8cdc..1e6ccef2cf0c 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -159,9 +159,9 @@ void usb_major_cleanup(void)
int usb_register_dev(struct usb_interface *intf,
struct usb_class_driver *class_driver)
{
- int retval = -EINVAL;
+ int retval;
int minor_base = class_driver->minor_base;
- int minor = 0;
+ int minor;
char name[20];
char *temp;
@@ -173,12 +173,17 @@ int usb_register_dev(struct usb_interface *intf,
*/
minor_base = 0;
#endif
- intf->minor = -1;
-
- dbg ("looking for a minor, starting at %d", minor_base);
if (class_driver->fops == NULL)
- goto exit;
+ return -EINVAL;
+ if (intf->minor >= 0)
+ return -EADDRINUSE;
+
+ retval = init_usb_class();
+ if (retval)
+ return retval;
+
+ dev_dbg(&intf->dev, "looking for a minor, starting at %d", minor_base);
down_write(&minor_rwsem);
for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) {
@@ -186,20 +191,12 @@ int usb_register_dev(struct usb_interface *intf,
continue;
usb_minors[minor] = class_driver->fops;
-
- retval = 0;
+ intf->minor = minor;
break;
}
up_write(&minor_rwsem);
-
- if (retval)
- goto exit;
-
- retval = init_usb_class();
- if (retval)
- goto exit;
-
- intf->minor = minor;
+ if (intf->minor < 0)
+ return -EXFULL;
/* create a usb class device for this usb interface */
snprintf(name, sizeof(name), class_driver->name, minor - minor_base);
@@ -213,11 +210,11 @@ int usb_register_dev(struct usb_interface *intf,
"%s", temp);
if (IS_ERR(intf->usb_dev)) {
down_write(&minor_rwsem);
- usb_minors[intf->minor] = NULL;
+ usb_minors[minor] = NULL;
+ intf->minor = -1;
up_write(&minor_rwsem);
retval = PTR_ERR(intf->usb_dev);
}
-exit:
return retval;
}
EXPORT_SYMBOL_GPL(usb_register_dev);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 844683e50383..9f0ce7de0e36 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1802,6 +1802,7 @@ free_interfaces:
intf->dev.groups = usb_interface_groups;
intf->dev.dma_mask = dev->dev.dma_mask;
INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
+ intf->minor = -1;
device_initialize(&intf->dev);
dev_set_name(&intf->dev, "%d-%s:%d.%d",
dev->bus->busnum, dev->devpath,
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 58b72d741d93..a1e8d273103f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -119,6 +119,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
ehci->broken_periodic = 1;
ehci_info(ehci, "using broken periodic workaround\n");
}
+ if (pdev->device == 0x0806 || pdev->device == 0x0811
+ || pdev->device == 0x0829) {
+ ehci_info(ehci, "disable lpm for langwell/penwell\n");
+ ehci->has_lpm = 0;
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 59dc3d351b60..5ab5bb89bae3 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -322,6 +322,7 @@ cppi_channel_allocate(struct dma_controller *c,
index, transmit ? 'T' : 'R', cppi_ch);
cppi_ch->hw_ep = ep;
cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+ cppi_ch->channel.max_len = 0x7fffffff;
DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
return &cppi_ch->channel;
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index c79a5e30d437..9e8639d4e862 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -195,15 +195,14 @@ static const struct file_operations musb_regdump_fops = {
static int musb_test_mode_open(struct inode *inode, struct file *file)
{
- file->private_data = inode->i_private;
-
return single_open(file, musb_test_mode_show, inode->i_private);
}
static ssize_t musb_test_mode_write(struct file *file,
const char __user *ubuf, size_t count, loff_t *ppos)
{
- struct musb *musb = file->private_data;
+ struct seq_file *s = file->private_data;
+ struct musb *musb = s->private;
u8 test = 0;
char buf[18];
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6fca870e957e..d065e23f123e 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -300,6 +300,11 @@ static void txstate(struct musb *musb, struct musb_request *req)
#ifndef CONFIG_MUSB_PIO_ONLY
if (is_dma_capable() && musb_ep->dma) {
struct dma_controller *c = musb->dma_controller;
+ size_t request_size;
+
+ /* setup DMA, then program endpoint CSR */
+ request_size = min_t(size_t, request->length - request->actual,
+ musb_ep->dma->max_len);
use_dma = (request->dma != DMA_ADDR_INVALID);
@@ -307,11 +312,6 @@ static void txstate(struct musb *musb, struct musb_request *req)
#ifdef CONFIG_USB_INVENTRA_DMA
{
- size_t request_size;
-
- /* setup DMA, then program endpoint CSR */
- request_size = min_t(size_t, request->length,
- musb_ep->dma->max_len);
if (request_size < musb_ep->packet_sz)
musb_ep->dma->desired_mode = 0;
else
@@ -373,8 +373,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
use_dma = use_dma && c->channel_program(
musb_ep->dma, musb_ep->packet_sz,
0,
- request->dma,
- request->length);
+ request->dma + request->actual,
+ request_size);
if (!use_dma) {
c->channel_release(musb_ep->dma);
musb_ep->dma = NULL;
@@ -386,8 +386,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
use_dma = use_dma && c->channel_program(
musb_ep->dma, musb_ep->packet_sz,
request->zero,
- request->dma,
- request->length);
+ request->dma + request->actual,
+ request_size);
#endif
}
#endif
@@ -501,26 +501,14 @@ void musb_g_tx(struct musb *musb, u8 epnum)
request->zero = 0;
}
- /* ... or if not, then complete it. */
- musb_g_giveback(musb_ep, request, 0);
-
- /*
- * Kickstart next transfer if appropriate;
- * the packet that just completed might not
- * be transmitted for hours or days.
- * REVISIT for double buffering...
- * FIXME revisit for stalls too...
- */
- musb_ep_select(mbase, epnum);
- csr = musb_readw(epio, MUSB_TXCSR);
- if (csr & MUSB_TXCSR_FIFONOTEMPTY)
- return;
-
- request = musb_ep->desc ? next_request(musb_ep) : NULL;
- if (!request) {
- DBG(4, "%s idle now\n",
- musb_ep->end_point.name);
- return;
+ if (request->actual == request->length) {
+ musb_g_giveback(musb_ep, request, 0);
+ request = musb_ep->desc ? next_request(musb_ep) : NULL;
+ if (!request) {
+ DBG(4, "%s idle now\n",
+ musb_ep->end_point.name);
+ return;
+ }
}
}
@@ -568,11 +556,19 @@ static void rxstate(struct musb *musb, struct musb_request *req)
{
const u8 epnum = req->epnum;
struct usb_request *request = &req->request;
- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
+ struct musb_ep *musb_ep;
void __iomem *epio = musb->endpoints[epnum].regs;
unsigned fifo_count = 0;
- u16 len = musb_ep->packet_sz;
+ u16 len;
u16 csr = musb_readw(epio, MUSB_RXCSR);
+ struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
+
+ if (hw_ep->is_shared_fifo)
+ musb_ep = &hw_ep->ep_in;
+ else
+ musb_ep = &hw_ep->ep_out;
+
+ len = musb_ep->packet_sz;
/* We shouldn't get here while DMA is active, but we do... */
if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
@@ -647,8 +643,8 @@ static void rxstate(struct musb *musb, struct musb_request *req)
*/
csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
csr |= MUSB_RXCSR_AUTOCLEAR;
+#ifdef USE_MODE1
/* csr |= MUSB_RXCSR_DMAMODE; */
/* this special sequence (enabling and then
@@ -663,10 +659,11 @@ static void rxstate(struct musb *musb, struct musb_request *req)
if (request->actual < request->length) {
int transfer_size = 0;
#ifdef USE_MODE1
- transfer_size = min(request->length,
+ transfer_size = min(request->length - request->actual,
channel->max_len);
#else
- transfer_size = len;
+ transfer_size = min(request->length - request->actual,
+ (unsigned)len);
#endif
if (transfer_size <= musb_ep->packet_sz)
musb_ep->dma->desired_mode = 0;
@@ -740,9 +737,15 @@ void musb_g_rx(struct musb *musb, u8 epnum)
u16 csr;
struct usb_request *request;
void __iomem *mbase = musb->mregs;
- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
+ struct musb_ep *musb_ep;
void __iomem *epio = musb->endpoints[epnum].regs;
struct dma_channel *dma;
+ struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
+
+ if (hw_ep->is_shared_fifo)
+ musb_ep = &hw_ep->ep_in;
+ else
+ musb_ep = &hw_ep->ep_out;
musb_ep_select(mbase, epnum);
@@ -1081,7 +1084,7 @@ struct free_record {
/*
* Context: controller locked, IRQs blocked.
*/
-static void musb_ep_restart(struct musb *musb, struct musb_request *req)
+void musb_ep_restart(struct musb *musb, struct musb_request *req)
{
DBG(3, "<== %s request %p len %u on hw_ep%d\n",
req->tx ? "TX/IN" : "RX/OUT",
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index c8b140325d82..572b1da7f2dc 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -105,4 +105,6 @@ extern void musb_gadget_cleanup(struct musb *);
extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
+extern void musb_ep_restart(struct musb *, struct musb_request *);
+
#endif /* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 59bef8f3a358..6dd03f4c5f49 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -261,6 +261,7 @@ __acquires(musb->lock)
ctrlrequest->wIndex & 0x0f;
struct musb_ep *musb_ep;
struct musb_hw_ep *ep;
+ struct musb_request *request;
void __iomem *regs;
int is_in;
u16 csr;
@@ -302,6 +303,14 @@ __acquires(musb->lock)
musb_writew(regs, MUSB_RXCSR, csr);
}
+ /* Maybe start the first request in the queue */
+ request = to_musb_request(
+ next_request(musb_ep));
+ if (!musb_ep->busy && request) {
+ DBG(3, "restarting the request\n");
+ musb_ep_restart(musb, request);
+ }
+
/* select ep0 again */
musb_ep_select(mbase, 0);
} break;
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 877d20b1dff9..9e65c47cc98b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -660,6 +660,12 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
qh->segsize = length;
+ /*
+ * Ensure the data reaches to main memory before starting
+ * DMA transfer
+ */
+ wmb();
+
if (!dma->channel_program(channel, pkt_size, mode,
urb->transfer_dma + offset, length)) {
dma->channel_release(channel);
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 05aaac1c3861..0bc97698af15 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -347,11 +347,20 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
}
}
-static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
{
- u8 pwr;
+ u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+
+ if (on)
+ pwr &= ~PHY_PWR_PHYPWD;
+ else
+ pwr |= PHY_PWR_PHYPWD;
- pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+}
+
+static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+{
if (on) {
regulator_enable(twl->usb3v1);
regulator_enable(twl->usb1v8);
@@ -365,15 +374,13 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
VUSB_DEDICATED2);
regulator_enable(twl->usb1v5);
- pwr &= ~PHY_PWR_PHYPWD;
- WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ __twl4030_phy_power(twl, 1);
twl4030_usb_write(twl, PHY_CLK_CTRL,
twl4030_usb_read(twl, PHY_CLK_CTRL) |
(PHY_CLK_CTRL_CLOCKGATING_EN |
PHY_CLK_CTRL_CLK32K_EN));
- } else {
- pwr |= PHY_PWR_PHYPWD;
- WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ } else {
+ __twl4030_phy_power(twl, 0);
regulator_disable(twl->usb1v5);
regulator_disable(twl->usb1v8);
regulator_disable(twl->usb3v1);
@@ -387,19 +394,25 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
twl4030_phy_power(twl, 0);
twl->asleep = 1;
+ dev_dbg(twl->dev, "%s\n", __func__);
}
-static void twl4030_phy_resume(struct twl4030_usb *twl)
+static void __twl4030_phy_resume(struct twl4030_usb *twl)
{
- if (!twl->asleep)
- return;
-
twl4030_phy_power(twl, 1);
twl4030_i2c_access(twl, 1);
twl4030_usb_set_mode(twl, twl->usb_mode);
if (twl->usb_mode == T2_USB_MODE_ULPI)
twl4030_i2c_access(twl, 0);
+}
+
+static void twl4030_phy_resume(struct twl4030_usb *twl)
+{
+ if (!twl->asleep)
+ return;
+ __twl4030_phy_resume(twl);
twl->asleep = 0;
+ dev_dbg(twl->dev, "%s\n", __func__);
}
static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
@@ -408,8 +421,8 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
- /* put VUSB3V1 LDO in active state */
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+ /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
+ /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
/* input to VUSB3V1 LDO is from VBAT, not VBUS */
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
@@ -502,6 +515,26 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
return IRQ_HANDLED;
}
+static void twl4030_usb_phy_init(struct twl4030_usb *twl)
+{
+ int status;
+
+ status = twl4030_usb_linkstat(twl);
+ if (status >= 0) {
+ if (status == USB_EVENT_NONE) {
+ __twl4030_phy_power(twl, 0);
+ twl->asleep = 1;
+ } else {
+ __twl4030_phy_resume(twl);
+ twl->asleep = 0;
+ }
+
+ blocking_notifier_call_chain(&twl->otg.notifier, status,
+ twl->otg.gadget);
+ }
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+}
+
static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
{
struct twl4030_usb *twl = xceiv_to_twl(x);
@@ -550,7 +583,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
int status, err;
- u8 pwr;
if (!pdata) {
dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -569,10 +601,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
twl->otg.set_peripheral = twl4030_set_peripheral;
twl->otg.set_suspend = twl4030_set_suspend;
twl->usb_mode = pdata->usb_mode;
-
- pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
-
- twl->asleep = (pwr & PHY_PWR_PHYPWD);
+ twl->asleep = 1;
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
@@ -610,15 +639,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
return status;
}
- /* The IRQ handler just handles changes from the previous states
- * of the ID and VBUS pins ... in probe() we must initialize that
- * previous state. The easy way: fake an IRQ.
- *
- * REVISIT: a real IRQ might have happened already, if PREEMPT is
- * enabled. Else the IRQ may not yet be configured or enabled,
- * because of scheduling delays.
+ /* Power down phy or make it work according to
+ * current link state.
*/
- twl4030_usb_irq(twl->irq, twl);
+ twl4030_usb_phy_init(twl);
dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
return 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 30922a7e3347..aa665817a272 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -2024,6 +2024,9 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
case TIOCGICOUNT:
cnow = mos7720_port->icount;
+
+ memset(&icount, 0, sizeof(struct serial_icounter_struct));
+
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 1c9b6e9b2386..1a42bc213799 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2285,6 +2285,9 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
case TIOCGICOUNT:
cnow = mos7840_port->icount;
smp_rmb();
+
+ memset(&icount, 0, sizeof(struct serial_icounter_struct));
+
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;