summaryrefslogtreecommitdiff
path: root/drivers/video/i810/i810_main.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/i810/i810_main.h')
-rw-r--r--drivers/video/i810/i810_main.h56
1 files changed, 4 insertions, 52 deletions
diff --git a/drivers/video/i810/i810_main.h b/drivers/video/i810/i810_main.h
index 06072a6466f2..51d4f3d4116d 100644
--- a/drivers/video/i810/i810_main.h
+++ b/drivers/video/i810/i810_main.h
@@ -14,55 +14,6 @@
#ifndef __I810_MAIN_H__
#define __I810_MAIN_H__
-static int __devinit i810fb_init_pci (struct pci_dev *dev,
- const struct pci_device_id *entry);
-static void __exit i810fb_remove_pci(struct pci_dev *dev);
-static int i810fb_resume(struct pci_dev *dev);
-static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
-
-/*
- * voffset - framebuffer offset in MiB from aperture start address. In order for
- * the driver to work with X, we must try to use memory holes left untouched by X. The
- * following table lists where X's different surfaces start at.
- *
- * ---------------------------------------------
- * : : 64 MiB : 32 MiB :
- * ----------------------------------------------
- * : FrontBuffer : 0 : 0 :
- * : DepthBuffer : 48 : 16 :
- * : BackBuffer : 56 : 24 :
- * ----------------------------------------------
- *
- * So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
- * 15 + 1 MiB of Framebuffer memory. For 32 MiB Aperture sizes, a v_offset of 8 MiB should
- * work, allowing 7 + 1 MiB of Framebuffer memory.
- * Note, the size of the hole may change depending on how much memory you allocate to X,
- * and how the memory is split up between these surfaces.
- *
- * Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
- * DRI disabled. But if the Frontbuffer is overlapped, X will fail to load.
- *
- * Experiment with v_offset to find out which works best for you.
- */
-static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
-static u32 voffset __initdata = 0;
-
-static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
-
-/* Chipset Specific Functions */
-static int i810fb_set_par (struct fb_info *info);
-static int i810fb_getcolreg (u8 regno, u8 *red, u8 *green, u8 *blue,
- u8 *transp, struct fb_info *info);
-static int i810fb_setcolreg (unsigned regno, unsigned red, unsigned green, unsigned blue,
- unsigned transp, struct fb_info *info);
-static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
-static int i810fb_blank (int blank_mode, struct fb_info *info);
-
-/* Initialization */
-static void i810fb_release_resource (struct fb_info *info, struct i810fb_par *par);
-extern int __init agp_intel_init(void);
-
-
/* Video Timings */
extern void round_off_xres (u32 *xres);
extern void round_off_yres (u32 *xres, u32 *yres);
@@ -101,7 +52,7 @@ static inline void i810_delete_i2c_busses(struct i810fb_par *par) { }
/* Conditionals */
#ifdef CONFIG_X86
-inline void flush_cache(void)
+static inline void flush_cache(void)
{
asm volatile ("wbinvd":::"memory");
}
@@ -110,7 +61,9 @@ inline void flush_cache(void)
#endif
#ifdef CONFIG_MTRR
-#define KERNEL_HAS_MTRR 1
+
+#include <asm/mtrr.h>
+
static inline void __devinit set_mtrr(struct i810fb_par *par)
{
par->mtrr_reg = mtrr_add((u32) par->aperture.physical,
@@ -128,7 +81,6 @@ static inline void unset_mtrr(struct i810fb_par *par)
par->aperture.size);
}
#else
-#define KERNEL_HAS_MTRR 0
#define set_mtrr(x) printk("set_mtrr: MTRR is disabled in the kernel\n")
#define unset_mtrr(x) do { } while (0)