summaryrefslogtreecommitdiff
path: root/fs/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'fs/Kconfig')
-rw-r--r--fs/Kconfig122
1 files changed, 111 insertions, 11 deletions
diff --git a/fs/Kconfig b/fs/Kconfig
index 599de54451af..7b1511d50b05 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -140,6 +140,73 @@ config EXT3_FS_SECURITY
If you are not using a security module that requires using
extended attributes for file security labels, say N.
+config EXT4DEV_FS
+ tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select JBD2
+ help
+ Ext4dev is a predecessor filesystem of the next generation
+ extended fs ext4, based on ext3 filesystem code. It will be
+ renamed ext4 fs later, once ext4dev is mature and stabilized.
+
+ Unlike the change from ext2 filesystem to ext3 filesystem,
+ the on-disk format of ext4dev is not the same as ext3 any more:
+ it is based on extent maps and it supports 48-bit physical block
+ numbers. These combined on-disk format changes will allow
+ ext4dev/ext4 to handle more than 16 TB filesystem volumes --
+ a hard limit that ext3 cannot overcome without changing the
+ on-disk format.
+
+ Other than extent maps and 48-bit block numbers, ext4dev also is
+ likely to have other new features such as persistent preallocation,
+ high resolution time stamps, and larger file support etc. These
+ features will be added to ext4dev gradually.
+
+ To compile this file system support as a module, choose M here. The
+ module will be called ext4dev. Be aware, however, that the filesystem
+ of your root partition (the one containing the directory /) cannot
+ be compiled as a module, and so this could be dangerous.
+
+ If unsure, say N.
+
+config EXT4DEV_FS_XATTR
+ bool "Ext4dev extended attributes"
+ depends on EXT4DEV_FS
+ default y
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+ You need this for POSIX ACL support on ext4dev/ext4.
+
+config EXT4DEV_FS_POSIX_ACL
+ bool "Ext4dev POSIX Access Control Lists"
+ depends on EXT4DEV_FS_XATTR
+ select FS_POSIX_ACL
+ help
+ POSIX Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the POSIX ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config EXT4DEV_FS_SECURITY
+ bool "Ext4dev Security Labels"
+ depends on EXT4DEV_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ext4dev/ext4 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
+
config JBD
tristate
help
@@ -172,12 +239,44 @@ config JBD_DEBUG
generated. To turn debugging off again, do
"echo 0 > /proc/sys/fs/jbd-debug".
+config JBD2
+ tristate
+ help
+ This is a generic journaling layer for block devices that support
+ both 32-bit and 64-bit block numbers. It is currently used by
+ the ext4dev/ext4 filesystem, but it could also be used to add
+ journal support to other file systems or block devices such
+ as RAID or LVM.
+
+ If you are using ext4dev/ext4, you need to say Y here. If you are not
+ using ext4dev/ext4 then you will probably want to say N.
+
+ To compile this device as a module, choose M here. The module will be
+ called jbd2. If you are compiling ext4dev/ext4 into the kernel,
+ you cannot compile this code as a module.
+
+config JBD2_DEBUG
+ bool "JBD2 (ext4dev/ext4) debugging support"
+ depends on JBD2
+ help
+ If you are using the ext4dev/ext4 journaled file system (or
+ potentially any other filesystem/device using JBD2), this option
+ allows you to enable debugging output while the system is running,
+ in order to help track down any problems you are having.
+ By default, the debugging output will be turned off.
+
+ If you select Y here, then you will be able to turn on debugging
+ with "echo N > /proc/sys/fs/jbd2-debug", where N is a number between
+ 1 and 5. The higher the number, the more debugging output is
+ generated. To turn debugging off again, do
+ "echo 0 > /proc/sys/fs/jbd2-debug".
+
config FS_MBCACHE
-# Meta block cache for Extended Attributes (ext2/ext3)
+# Meta block cache for Extended Attributes (ext2/ext3/ext4)
tristate
- depends on EXT2_FS_XATTR || EXT3_FS_XATTR
- default y if EXT2_FS=y || EXT3_FS=y
- default m if EXT2_FS=m || EXT3_FS=m
+ depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR
+ default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y
+ default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m
config REISERFS_FS
tristate "Reiserfs support"
@@ -535,6 +634,10 @@ config FUSE_FS
If you want to develop a userspace FS, or if you want to use
a filesystem based on FUSE, answer Y or M.
+config GENERIC_ACL
+ bool
+ select FS_POSIX_ACL
+
if BLOCK
menu "CD-ROM/DVD Filesystems"
@@ -1674,6 +1777,7 @@ config RPCSEC_GSS_KRB5
select CRYPTO
select CRYPTO_MD5
select CRYPTO_DES
+ select CRYPTO_CBC
help
Provides for secure RPC calls by means of a gss-api
mechanism based on Kerberos V5. This is required for
@@ -1692,6 +1796,7 @@ config RPCSEC_GSS_SPKM3
select CRYPTO_MD5
select CRYPTO_DES
select CRYPTO_CAST5
+ select CRYPTO_CBC
help
Provides for secure RPC calls by means of a gss-api
mechanism based on the SPKM3 public-key mechanism.
@@ -1887,7 +1992,7 @@ config CIFS_EXPERIMENTAL
config CIFS_UPCALL
bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
depends on CIFS_EXPERIMENTAL
- select CONNECTOR
+ depends on CONNECTOR
help
Enables an upcall mechanism for CIFS which will be used to contact
userspace helper utilities to provide SPNEGO packaged Kerberos
@@ -1955,8 +2060,7 @@ config CODA_FS_OLD_API
For most cases you probably want to say N.
config AFS_FS
-# for fs/nls/Config.in
- tristate "Andrew File System support (AFS) (Experimental)"
+ tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
depends on INET && EXPERIMENTAL
select RXRPC
help
@@ -1981,10 +2085,6 @@ config 9P_FS
If unsure, say N.
-config GENERIC_ACL
- bool
- select FS_POSIX_ACL
-
endmenu
if BLOCK