summaryrefslogtreecommitdiff
path: root/include/linux/atmdev.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/atmdev.h')
-rw-r--r--include/linux/atmdev.h489
1 files changed, 489 insertions, 0 deletions
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
new file mode 100644
index 000000000000..9f374cfa1b05
--- /dev/null
+++ b/include/linux/atmdev.h
@@ -0,0 +1,489 @@
+/* atmdev.h - ATM device driver declarations and various related items */
+
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef LINUX_ATMDEV_H
+#define LINUX_ATMDEV_H
+
+
+#include <linux/config.h>
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ESI_LEN 6
+
+#define ATM_OC3_PCR (155520000/270*260/8/53)
+ /* OC3 link rate: 155520000 bps
+ SONET overhead: /270*260 (9 section, 1 path)
+ bits per cell: /8/53
+ max cell rate: 353207.547 cells/sec */
+#define ATM_25_PCR ((25600000/8-8000)/54)
+ /* 25 Mbps ATM cell rate (59111) */
+#define ATM_OC12_PCR (622080000/1080*1040/8/53)
+ /* OC12 link rate: 622080000 bps
+ SONET overhead: /1080*1040
+ bits per cell: /8/53
+ max cell rate: 1412830.188 cells/sec */
+#define ATM_DS3_PCR (8000*12)
+ /* DS3: 12 cells in a 125 usec time slot */
+
+
+#define __AAL_STAT_ITEMS \
+ __HANDLE_ITEM(tx); /* TX okay */ \
+ __HANDLE_ITEM(tx_err); /* TX errors */ \
+ __HANDLE_ITEM(rx); /* RX okay */ \
+ __HANDLE_ITEM(rx_err); /* RX errors */ \
+ __HANDLE_ITEM(rx_drop); /* RX out of memory */
+
+struct atm_aal_stats {
+#define __HANDLE_ITEM(i) int i
+ __AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct atm_dev_stats {
+ struct atm_aal_stats aal0;
+ struct atm_aal_stats aal34;
+ struct atm_aal_stats aal5;
+} __ATM_API_ALIGN;
+
+
+#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
+ /* get link rate */
+#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
+ /* get interface names (numbers) */
+#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
+ /* get interface type name */
+#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
+ /* get interface ESI */
+#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
+ /* get itf's local ATM addr. list */
+#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
+ /* reset itf's ATM address list */
+#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
+ /* add a local ATM address */
+#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
+ /* remove a local ATM address */
+#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
+ /* get connection identifier range */
+#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
+ /* set connection identifier range */
+#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
+ /* set interface ESI */
+#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
+ /* force interface ESI */
+#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
+ /* get AAL layer statistics */
+#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
+ /* get AAL layer statistics and zero */
+#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
+ /* get loopback mode */
+#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
+ /* set loopback mode */
+#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
+ /* query supported loopback modes */
+#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
+ /* enable or disable single-copy */
+#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
+ /* set backend handler */
+#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+ /* use backend to make new if */
+#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
+ /* add party to p2mp call */
+#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int)
+ /* drop party from p2mp call */
+
+/*
+ * These are backend handkers that can be set via the ATM_SETBACKEND call
+ * above. In the future we may support dynamic loading of these - for now,
+ * they're just being used to share the ATMIOC_BACKEND ioctls
+ */
+#define ATM_BACKEND_RAW 0
+#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
+#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
+
+/* for ATM_GETTYPE */
+#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
+
+/*
+ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
+ */
+
+/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
+#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
+#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
+#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
+/* RESERVED 4 loop back on PHY side ---' */
+#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
+#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
+
+/* Direction of loopback */
+#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
+#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
+
+#define __ATM_LM_XTLOC(n) ((n) & 0xff)
+#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
+
+#define ATM_LM_NONE 0 /* no loopback */
+
+#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
+#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
+#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
+#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
+
+#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
+#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
+#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
+#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
+
+/*
+ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
+ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
+ */
+
+
+struct atm_iobuf {
+ int length;
+ void __user *buffer;
+};
+
+/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
+
+#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
+
+struct atm_cirange {
+ signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
+ signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
+};
+
+/* for ATM_SETSC; actually taken from the ATM_VF number space */
+
+#define ATM_SC_RX 1024 /* enable RX single-copy */
+#define ATM_SC_TX 2048 /* enable TX single-copy */
+
+#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
+ anyway */
+
+/* MF: change_qos (Modify) flags */
+
+#define ATM_MF_IMMED 1 /* Block until change is effective */
+#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
+#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
+#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
+#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
+#define ATM_MF_BWD 32 /* Set the backward direction parameters */
+
+#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
+ ATM_MF_DEC_SHP | ATM_MF_BWD)
+
+/*
+ * ATM_VS_* are used to express VC state in a human-friendly way.
+ */
+
+#define ATM_VS_IDLE 0 /* VC is not used */
+#define ATM_VS_CONNECTED 1 /* VC is connected */
+#define ATM_VS_CLOSING 2 /* VC is closing */
+#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
+#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
+#define ATM_VS_BOUND 5 /* VC is bound */
+
+#define ATM_VS2TXT_MAP \
+ "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
+
+#define ATM_VF2TXT_MAP \
+ "ADDR", "READY", "PARTIAL", "REGIS", \
+ "RELEASED", "HASQOS", "LISTEN", "META", \
+ "256", "512", "1024", "2048", \
+ "SESSION", "HASSAP", "BOUND", "CLOSE"
+
+
+#ifdef __KERNEL__
+
+#include <linux/wait.h> /* wait_queue_head_t */
+#include <linux/time.h> /* struct timeval */
+#include <linux/net.h>
+#include <linux/skbuff.h> /* struct sk_buff */
+#include <linux/uio.h>
+#include <net/sock.h>
+#include <asm/atomic.h>
+
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+
+extern struct proc_dir_entry *atm_proc_root;
+#endif
+
+
+struct k_atm_aal_stats {
+#define __HANDLE_ITEM(i) atomic_t i
+ __AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct k_atm_dev_stats {
+ struct k_atm_aal_stats aal0;
+ struct k_atm_aal_stats aal34;
+ struct k_atm_aal_stats aal5;
+};
+
+
+enum {
+ ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared
+ by device driver. */
+ ATM_VF_READY, /* VC is ready to transfer data. Set by device
+ driver, cleared by anybody. */
+ ATM_VF_PARTIAL, /* resources are bound to PVC (partial PVC
+ setup), controlled by socket layer */
+ ATM_VF_REGIS, /* registered with demon, controlled by SVC
+ socket layer */
+ ATM_VF_BOUND, /* local SAP is set, controlled by SVC socket
+ layer */
+ ATM_VF_RELEASED, /* demon has indicated/requested release,
+ controlled by SVC socket layer */
+ ATM_VF_HASQOS, /* QOS parameters have been set */
+ ATM_VF_LISTEN, /* socket is used for listening */
+ ATM_VF_META, /* SVC socket isn't used for normal data
+ traffic and doesn't depend on signaling
+ to be available */
+ ATM_VF_SESSION, /* VCC is p2mp session control descriptor */
+ ATM_VF_HASSAP, /* SAP has been set */
+ ATM_VF_CLOSE, /* asynchronous close - treat like VF_RELEASED*/
+ ATM_VF_WAITING, /* waiting for reply from sigd */
+ ATM_VF_IS_CLIP, /* in use by CLIP protocol */
+};
+
+
+#define ATM_VF2VS(flags) \
+ (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
+ test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
+ test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
+ test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
+ test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
+
+
+enum {
+ ATM_DF_CLOSE, /* close device when last VCC is closed */
+};
+
+
+#define ATM_PHY_SIG_LOST 0 /* no carrier/light */
+#define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */
+#define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */
+
+#define ATM_ATMOPT_CLP 1 /* set CLP bit */
+
+struct atm_vcc {
+ /* struct sock has to be the first member of atm_vcc */
+ struct sock sk;
+ unsigned long flags; /* VCC flags (ATM_VF_*) */
+ short vpi; /* VPI and VCI (types must be equal */
+ /* with sockaddr) */
+ int vci;
+ unsigned long aal_options; /* AAL layer options */
+ unsigned long atm_options; /* ATM layer options */
+ struct atm_dev *dev; /* device back pointer */
+ struct atm_qos qos; /* QOS */
+ struct atm_sap sap; /* SAP */
+ void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
+ void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
+ int (*push_oam)(struct atm_vcc *vcc,void *cell);
+ int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+ void *dev_data; /* per-device data */
+ void *proto_data; /* per-protocol data */
+ struct k_atm_aal_stats *stats; /* pointer to AAL stats group */
+ /* SVC part --- may move later ------------------------------------- */
+ short itf; /* interface number */
+ struct sockaddr_atmsvc local;
+ struct sockaddr_atmsvc remote;
+ /* Multipoint part ------------------------------------------------- */
+ struct atm_vcc *session; /* session VCC descriptor */
+ /* Other stuff ----------------------------------------------------- */
+ void *user_back; /* user backlink - not touched by */
+ /* native ATM stack. Currently used */
+ /* by CLIP and sch_atm. */
+};
+
+static inline struct atm_vcc *atm_sk(struct sock *sk)
+{
+ return (struct atm_vcc *)sk;
+}
+
+static inline struct atm_vcc *ATM_SD(struct socket *sock)
+{
+ return atm_sk(sock->sk);
+}
+
+static inline struct sock *sk_atm(struct atm_vcc *vcc)
+{
+ return (struct sock *)vcc;
+}
+
+struct atm_dev_addr {
+ struct sockaddr_atmsvc addr; /* ATM address */
+ struct list_head entry; /* next address */
+};
+
+struct atm_dev {
+ const struct atmdev_ops *ops; /* device operations; NULL if unused */
+ const struct atmphy_ops *phy; /* PHY operations, may be undefined */
+ /* (NULL) */
+ const char *type; /* device type name */
+ int number; /* device index */
+ void *dev_data; /* per-device data */
+ void *phy_data; /* private PHY date */
+ unsigned long flags; /* device flags (ATM_DF_*) */
+ struct list_head local; /* local ATM addresses */
+ unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */
+ struct atm_cirange ci_range; /* VPI/VCI range */
+ struct k_atm_dev_stats stats; /* statistics */
+ char signal; /* signal status (ATM_PHY_SIG_*) */
+ int link_rate; /* link rate (default: OC3) */
+ atomic_t refcnt; /* reference count */
+ spinlock_t lock; /* protect internal members */
+#ifdef CONFIG_PROC_FS
+ struct proc_dir_entry *proc_entry; /* proc entry */
+ char *proc_name; /* proc entry name */
+#endif
+ struct list_head dev_list; /* linkage */
+};
+
+
+/* OF: send_Oam Flags */
+
+#define ATM_OF_IMMED 1 /* Attempt immediate delivery */
+#define ATM_OF_INRATE 2 /* Attempt in-rate delivery */
+
+
+/*
+ * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
+ */
+
+struct atmdev_ops { /* only send is required */
+ void (*dev_close)(struct atm_dev *dev);
+ int (*open)(struct atm_vcc *vcc);
+ void (*close)(struct atm_vcc *vcc);
+ int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
+ int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
+ void __user *optval,int optlen);
+ int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
+ void __user *optval,int optlen);
+ int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+ int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
+ void (*phy_put)(struct atm_dev *dev,unsigned char value,
+ unsigned long addr);
+ unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
+ int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
+ int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
+ struct module *owner;
+};
+
+struct atmphy_ops {
+ int (*start)(struct atm_dev *dev);
+ int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
+ void (*interrupt)(struct atm_dev *dev);
+ int (*stop)(struct atm_dev *dev);
+};
+
+struct atm_skb_data {
+ struct atm_vcc *vcc; /* ATM VCC */
+ unsigned long atm_options; /* ATM layer options */
+};
+
+#define VCC_HTABLE_SIZE 32
+
+extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
+extern rwlock_t vcc_sklist_lock;
+
+#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
+
+struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
+ int number,unsigned long *flags); /* number == -1: pick first available */
+struct atm_dev *atm_dev_lookup(int number);
+void atm_dev_deregister(struct atm_dev *dev);
+void shutdown_atm_dev(struct atm_dev *dev);
+void vcc_insert_socket(struct sock *sk);
+
+
+/*
+ * This is approximately the algorithm used by alloc_skb.
+ *
+ */
+
+static inline int atm_guess_pdu2truesize(int size)
+{
+ return (SKB_DATA_ALIGN(size) + sizeof(struct skb_shared_info));
+}
+
+
+static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
+{
+ atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
+}
+
+
+static inline void atm_return(struct atm_vcc *vcc,int truesize)
+{
+ atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
+}
+
+
+static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
+{
+ return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
+ sk_atm(vcc)->sk_sndbuf;
+}
+
+
+static inline void atm_dev_hold(struct atm_dev *dev)
+{
+ atomic_inc(&dev->refcnt);
+}
+
+
+static inline void atm_dev_put(struct atm_dev *dev)
+{
+ atomic_dec(&dev->refcnt);
+
+ if ((atomic_read(&dev->refcnt) == 1) &&
+ test_bit(ATM_DF_CLOSE,&dev->flags))
+ shutdown_atm_dev(dev);
+}
+
+
+int atm_charge(struct atm_vcc *vcc,int truesize);
+struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
+ int gfp_flags);
+int atm_pcr_goal(struct atm_trafprm *tp);
+
+void vcc_release_async(struct atm_vcc *vcc, int reply);
+
+struct atm_ioctl {
+ struct module *owner;
+ /* A module reference is kept if appropriate over this call.
+ * Return -ENOIOCTLCMD if you don't handle it. */
+ int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
+ struct list_head list;
+};
+
+/**
+ * register_atm_ioctl - register handler for ioctl operations
+ *
+ * Special (non-device) handlers of ioctl's should
+ * register here. If you're a normal device, you should
+ * set .ioctl in your atmdev_ops instead.
+ */
+void register_atm_ioctl(struct atm_ioctl *);
+
+/**
+ * deregister_atm_ioctl - remove the ioctl handler
+ */
+void deregister_atm_ioctl(struct atm_ioctl *);
+
+#endif /* __KERNEL__ */
+
+#endif