summaryrefslogtreecommitdiff
path: root/include/linux/platform_data/hsmmc-omap.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/platform_data/hsmmc-omap.h')
-rw-r--r--include/linux/platform_data/hsmmc-omap.h90
1 files changed, 90 insertions, 0 deletions
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
new file mode 100644
index 000000000000..67bbcf0785f6
--- /dev/null
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -0,0 +1,90 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * struct omap_hsmmc_dev_attr.flags possibilities
+ *
+ * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
+ * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
+ * should be set if this is the case. See for example Section 22.5.3
+ * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
+ * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
+ *
+ * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
+ * don't work correctly on some MMC controller instances on some
+ * OMAP3 SoCs; this flag should be set if this is the case. See
+ * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
+ * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
+ * Revision F (October 2010) (SPRZ278F).
+ */
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
+#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
+#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2)
+
+struct omap_hsmmc_dev_attr {
+ u8 flags;
+};
+
+struct mmc_card;
+
+struct omap_hsmmc_platform_data {
+ /* back-link to device */
+ struct device *dev;
+
+ /* set if your board has components or wiring that limits the
+ * maximum frequency on the MMC bus */
+ unsigned int max_freq;
+
+ /* Integrating attributes from the omap_hwmod layer */
+ u8 controller_flags;
+
+ /* Register offset deviation */
+ u16 reg_offset;
+
+ /*
+ * 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h)
+ */
+ u32 caps; /* Used for the MMC driver on 2430 and later */
+ u32 pm_caps; /* PM capabilities of the mmc */
+
+ /* switch pin can be for card detect (default) or card cover */
+ unsigned cover:1;
+
+ /* use the internal clock */
+ unsigned internal_clock:1;
+
+ /* nonremovable e.g. eMMC */
+ unsigned nonremovable:1;
+
+ /* eMMC does not handle power off when not in sleep state */
+ unsigned no_regulator_off_init:1;
+
+ /* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS (1 << 0)
+#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
+ unsigned features;
+
+ int switch_pin; /* gpio (card detect) */
+ int gpio_wp; /* gpio (write protect) */
+
+ int (*set_power)(struct device *dev, int power_on, int vdd);
+ void (*remux)(struct device *dev, int power_on);
+ /* Call back before enabling / disabling regulators */
+ void (*before_set_reg)(struct device *dev, int power_on, int vdd);
+ /* Call back after enabling / disabling regulators */
+ void (*after_set_reg)(struct device *dev, int power_on, int vdd);
+ /* if we have special card, init it using this callback */
+ void (*init_card)(struct mmc_card *card);
+
+ const char *name;
+ u32 ocr_mask;
+};