diff options
Diffstat (limited to 'include/media/sh532u.h')
| -rw-r--r-- | include/media/sh532u.h | 116 |
1 files changed, 59 insertions, 57 deletions
diff --git a/include/media/sh532u.h b/include/media/sh532u.h index 166caad65f88..19da2070b70f 100644 --- a/include/media/sh532u.h +++ b/include/media/sh532u.h @@ -19,36 +19,38 @@ #ifndef __SH532U_H__ #define __SH532U_H__ -#include <linux/ioctl.h> /* For IOCTL macros */ +#include <media/nvc_focus.h> -#define SH532U_IOCTL_GET_CONFIG _IOR('o', 1, struct sh532u_config) -#define SH532U_IOCTL_SET_POSITION _IOW('o', 2, u32) -#define SH532U_IOCTL_GET_MOVE_STATUS _IOW('o', 3, unsigned char) -#define SH532U_IOCTL_SET_CAMERA_MODE _IOW('o', 4, unsigned char) -enum sh532u_move_status { - SH532U_STATE_UNKNOWN = 1, - SH532U_WAIT_FOR_MOVE_END, - SH532U_WAIT_FOR_SETTLE, - SH532U_LENS_SETTLED, - SH532U_Forced32 = 0x7FFFFFFF +struct sh532u_platform_data { + int cfg; + int num; + int sync; + const char *dev_name; + struct nvc_focus_nvc (*nvc); + struct nvc_focus_cap (*cap); + struct sh532u_pdata_info (*info); + __u8 i2c_addr_rom; + unsigned gpio_reset; +/* Due to a Linux limitation, a GPIO is defined to "enable" the device. This + * workaround is for when the device's power GPIO's are behind an I2C expander. + * The Linux limitation doesn't allow the I2C GPIO expander to be ready for + * use when this device is probed. + */ + unsigned gpio_en; }; -struct sh532u_config { - __u32 settle_time; - __u32 focal_length; - __u32 fnumber; - s16 pos_low; - s16 pos_high; - s16 limit_low; - s16 limit_high; +struct sh532u_pdata_info { + __s16 pos_low; + __s16 pos_high; + __s16 limit_low; + __s16 limit_high; + int move_timeoutms; + __u32 focus_hyper_ratio; + __u32 focus_hyper_div; }; -struct sh532u_platform_data { - void *context_data; - int (*board_init)(void *context_data); - int (*board_deinit)(void *context_data); -}; + /* Register Definition : Sany Driver IC */ /* EEPROM addresses */ #define addrHallOffset 0x10 @@ -104,8 +106,8 @@ struct sh532u_platform_data { #define ADHXI_211L 0x01 #define PIDZO_211H 0x02 #define PIDZO_211L 0x03 -#define RZ_211H 0x04 -#define RZ_211L 0x05 +#define RZ_211H 0x04 +#define RZ_211L 0x05 #define DZ1_211H 0x06 #define DZ1_211L 0x07 #define DZ2_211H 0x08 @@ -148,8 +150,8 @@ struct sh532u_platform_data { #define OZ4_211L 0x2D #define OZ5_211H 0x2E #define OZ5_211L 0x2F -#define oe_211H 0x30 -#define oe_211L 0x31 +#define oe_211H 0x30 +#define oe_211L 0x31 #define MSR1CMAX_211H 0x32 #define MSR1CMAX_211L 0x33 #define MSR1CMIN_211H 0x34 @@ -162,34 +164,34 @@ struct sh532u_platform_data { #define OFFSET_211L 0x3B #define ADOFFSET_211H 0x3C #define ADOFFSET_211L 0x3D -#define EZ_211H 0x3E -#define EZ_211L 0x3F +#define EZ_211H 0x3E +#define EZ_211L 0x3F /* Coefficient RAM 40h ~ 7Fh */ -#define ag_211H 0x40 -#define ag_211L 0x41 -#define da_211H 0x42 -#define da_211L 0x43 -#define db_211H 0x44 -#define db_211L 0x45 -#define dc_211H 0x46 -#define dc_211L 0x47 -#define dg_211H 0x48 -#define dg_211L 0x49 -#define pg_211H 0x4A -#define pg_211L 0x4B +#define ag_211H 0x40 +#define ag_211L 0x41 +#define da_211H 0x42 +#define da_211L 0x43 +#define db_211H 0x44 +#define db_211L 0x45 +#define dc_211H 0x46 +#define dc_211L 0x47 +#define dg_211H 0x48 +#define dg_211L 0x49 +#define pg_211H 0x4A +#define pg_211L 0x4B #define gain1_211H 0x4C #define gain1_211L 0x4D #define gain2_211H 0x4E #define gain2_211L 0x4F -#define ua_211H 0x50 -#define ua_211L 0x51 -#define uc_211H 0x52 -#define uc_211L 0x53 -#define ia_211H 0x54 -#define ia_211L 0x55 -#define ib_211H 0x56 -#define ib_211L 0x57 +#define ua_211H 0x50 +#define ua_211L 0x51 +#define uc_211H 0x52 +#define uc_211L 0x53 +#define ia_211H 0x54 +#define ia_211L 0x55 +#define ib_211H 0x56 +#define ib_211L 0x57 #define i_c_211H 0x58 #define i_c_211L 0x59 #define ms11a_211H 0x5A @@ -216,10 +218,10 @@ struct sh532u_platform_data { #define ms22e_211L 0x6F #define ms23p_211H 0x70 #define ms23p_211L 0x71 -#define oa_211H 0x72 -#define oa_211L 0x73 -#define oc_211H 0x74 -#define oc_211L 0x75 +#define oa_211H 0x72 +#define oa_211L 0x73 +#define oc_211H 0x74 +#define oc_211L 0x75 #define PX12_211H 0x76 #define PX12_211L 0x77 #define PX3_211H 0x78 @@ -237,7 +239,7 @@ struct sh532u_platform_data { #define PWMSEL_211 0x82 #define SWTCH_211 0x83 #define STBY_211 0x84 -#define CLR_211 0x85 +#define CLR_211 0x85 #define DSSEL_211 0x86 #define ENBL_211 0x87 #define ANA1_211 0x88 @@ -296,10 +298,10 @@ P0 P1 /* E2P data type define of HVCA Initial Value Section */ #define DIRECT_MODE 0x00 -#define INDIRECT_EEPROM 0x10 +#define INDIRECT_EEPROM 0x10 #define INDIRECT_HVCA 0x20 #define MASK_AND 0x70 -#define MASK_OR 0x80 +#define MASK_OR 0x80 #define DATA_1BYTE 0x01 #define DATA_2BYTE 0x02 |