diff options
Diffstat (limited to 'sound/soc/s3c24xx')
| -rw-r--r-- | sound/soc/s3c24xx/Kconfig | 10 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/Makefile | 2 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/s3c-ac97.c | 1 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/s3c-i2s-v2.c | 3 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/smartq_wm8987.c | 295 | ||||
| -rw-r--r-- | sound/soc/s3c24xx/smdk_wm9713.c | 3 |
6 files changed, 310 insertions, 4 deletions
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 2a7cc222d098..213963ac3c28 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -1,6 +1,6 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3CXXXX chips" - depends on ARCH_S3C2410 || ARCH_S3C64XX + depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 select S3C64XX_DMA if ARCH_S3C64XX help Say Y or M if you want to add support for codecs attached to @@ -120,8 +120,14 @@ config SND_S3C24XX_SOC_SIMTEC_HERMES config SND_SOC_SMDK_WM9713 tristate "SoC AC97 Audio support for SMDK with WM9713" - depends on SND_S3C24XX_SOC && MACH_SMDK6410 + depends on SND_S3C24XX_SOC && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110) select SND_SOC_WM9713 select SND_S3C_SOC_AC97 help Sat Y if you want to add support for SoC audio on the SMDK. + +config SND_S3C64XX_SOC_SMARTQ + tristate "SoC I2S Audio support for SmartQ board" + depends on SND_S3C24XX_SOC && MACH_SMARTQ + select SND_S3C64XX_SOC_I2S + select SND_SOC_WM8750 diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile index 81d8dc503f87..50172c385d90 100644 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile @@ -29,6 +29,7 @@ snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o snd-soc-smdk-wm9713-objs := smdk_wm9713.o +snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o @@ -41,3 +42,4 @@ obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o +obj-$(CONFIG_SND_S3C64XX_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o diff --git a/sound/soc/s3c24xx/s3c-ac97.c b/sound/soc/s3c24xx/s3c-ac97.c index ecf4fd04ae96..31f6d45b6384 100644 --- a/sound/soc/s3c24xx/s3c-ac97.c +++ b/sound/soc/s3c24xx/s3c-ac97.c @@ -31,7 +31,6 @@ #define AC_CMD_DATA(x) (x & 0xffff) struct s3c_ac97_info { - unsigned state; struct clk *ac97_clk; void __iomem *regs; struct mutex lock; diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index 13311c8cf965..64376b2aac73 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -32,7 +32,8 @@ #undef S3C_IIS_V2_SUPPORTED -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \ + || defined(CONFIG_CPU_S5PV210) #define S3C_IIS_V2_SUPPORTED #endif diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c new file mode 100644 index 000000000000..b480348140b0 --- /dev/null +++ b/sound/soc/s3c24xx/smartq_wm8987.c @@ -0,0 +1,295 @@ +/* sound/soc/s3c24xx/smartq_wm8987.c + * + * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com> + * + * Based on smdk6410_wm8987.c + * Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com + * Graeme Gregory - graeme.gregory@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> + +#include <asm/mach-types.h> + +#include "s3c-dma.h" +#include "s3c64xx-i2s.h" + +#include "../codecs/wm8750.h" + +/* + * WM8987 is register compatible with WM8750, so using that as base driver. + */ + +static struct snd_soc_card snd_soc_smartq; + +static int smartq_hifi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct s3c_i2sv2_rate_calc div; + unsigned int clk = 0; + int ret; + + s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params), + s3c_i2sv2_get_clock(cpu_dai)); + + switch (params_rate(params)) { + case 8000: + case 16000: + case 32000: + case 48000: + case 96000: + clk = 12288000; + break; + case 11025: + case 22050: + case 44100: + case 88200: + clk = 11289600; + break; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + /* set MCLK division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_RCLK, div.fs_div); + if (ret < 0) + return ret; + + /* set prescaler division for sample rate */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_PRESCALER, + div.clk_div - 1); + if (ret < 0) + return ret; + + return 0; +} + +/* + * SmartQ WM8987 HiFi DAI operations. + */ +static struct snd_soc_ops smartq_hifi_ops = { + .hw_params = smartq_hifi_hw_params, +}; + +static struct snd_soc_jack smartq_jack; + +static struct snd_soc_jack_pin smartq_jack_pins[] = { + /* Disable speaker when headphone is plugged in */ + { + .pin = "Internal Speaker", + .mask = SND_JACK_HEADPHONE, + }, +}; + +static struct snd_soc_jack_gpio smartq_jack_gpios[] = { + { + .gpio = S3C64XX_GPL(12), + .name = "headphone detect", + .report = SND_JACK_HEADPHONE, + .debounce_time = 200, + }, +}; + +static const struct snd_kcontrol_new wm8987_smartq_controls[] = { + SOC_DAPM_PIN_SWITCH("Internal Speaker"), + SOC_DAPM_PIN_SWITCH("Headphone Jack"), + SOC_DAPM_PIN_SWITCH("Internal Mic"), +}; + +static int smartq_speaker_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, + int event) +{ + gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event)); + + return 0; +} + +static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = { + SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event), + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Internal Mic", NULL), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Headphone Jack", NULL, "LOUT2"}, + {"Headphone Jack", NULL, "ROUT2"}, + + {"Internal Speaker", NULL, "LOUT2"}, + {"Internal Speaker", NULL, "ROUT2"}, + + {"Mic Bias", NULL, "Internal Mic"}, + {"LINPUT2", NULL, "Mic Bias"}, +}; + +static int smartq_wm8987_init(struct snd_soc_codec *codec) +{ + int err = 0; + + /* Add SmartQ specific widgets */ + snd_soc_dapm_new_controls(codec, wm8987_dapm_widgets, + ARRAY_SIZE(wm8987_dapm_widgets)); + + /* add SmartQ specific controls */ + err = snd_soc_add_controls(codec, wm8987_smartq_controls, + ARRAY_SIZE(wm8987_smartq_controls)); + + if (err < 0) + return err; + + /* setup SmartQ specific audio path */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + /* set endpoints to not connected */ + snd_soc_dapm_nc_pin(codec, "LINPUT1"); + snd_soc_dapm_nc_pin(codec, "RINPUT1"); + snd_soc_dapm_nc_pin(codec, "OUT3"); + snd_soc_dapm_nc_pin(codec, "ROUT1"); + + /* set endpoints to default off mode */ + snd_soc_dapm_enable_pin(codec, "Internal Speaker"); + snd_soc_dapm_enable_pin(codec, "Internal Mic"); + snd_soc_dapm_disable_pin(codec, "Headphone Jack"); + + err = snd_soc_dapm_sync(codec); + if (err) + return err; + + /* Headphone jack detection */ + err = snd_soc_jack_new(&snd_soc_smartq, "Headphone Jack", + SND_JACK_HEADPHONE, &smartq_jack); + if (err) + return err; + + err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins), + smartq_jack_pins); + if (err) + return err; + + err = snd_soc_jack_add_gpios(&smartq_jack, + ARRAY_SIZE(smartq_jack_gpios), + smartq_jack_gpios); + + return err; +} + +static struct snd_soc_dai_link smartq_dai[] = { + { + .name = "wm8987", + .stream_name = "SmartQ Hi-Fi", + .cpu_dai = &s3c64xx_i2s_dai[0], + .codec_dai = &wm8750_dai, + .init = smartq_wm8987_init, + .ops = &smartq_hifi_ops, + }, +}; + +static struct snd_soc_card snd_soc_smartq = { + .name = "SmartQ", + .platform = &s3c24xx_soc_platform, + .dai_link = smartq_dai, + .num_links = ARRAY_SIZE(smartq_dai), +}; + +static struct snd_soc_device smartq_snd_devdata = { + .card = &snd_soc_smartq, + .codec_dev = &soc_codec_dev_wm8750, +}; + +static struct platform_device *smartq_snd_device; + +static int __init smartq_init(void) +{ + int ret; + + if (!machine_is_smartq7() && !machine_is_smartq5()) { + pr_info("Only SmartQ is supported by this ASoC driver\n"); + return -ENODEV; + } + + smartq_snd_device = platform_device_alloc("soc-audio", -1); + if (!smartq_snd_device) + return -ENOMEM; + + platform_set_drvdata(smartq_snd_device, &smartq_snd_devdata); + smartq_snd_devdata.dev = &smartq_snd_device->dev; + + ret = platform_device_add(smartq_snd_device); + if (ret) { + platform_device_put(smartq_snd_device); + return ret; + } + + /* Initialise GPIOs used by amplifiers */ + ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown"); + if (ret) { + dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n"); + goto err_unregister_device; + } + + /* Disable amplifiers */ + ret = gpio_direction_output(S3C64XX_GPK(12), 1); + if (ret) { + dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n"); + goto err_free_gpio_amp_shut; + } + + return 0; + +err_free_gpio_amp_shut: + gpio_free(S3C64XX_GPK(12)); +err_unregister_device: + platform_device_unregister(smartq_snd_device); + + return ret; +} + +static void __exit smartq_exit(void) +{ + snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios), + smartq_jack_gpios); + + platform_device_unregister(smartq_snd_device); +} + +module_init(smartq_init); +module_exit(smartq_exit); + +/* Module information */ +MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>"); +MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c index 24fd39f38ccb..5527b9e88c98 100644 --- a/sound/soc/s3c24xx/smdk_wm9713.c +++ b/sound/soc/s3c24xx/smdk_wm9713.c @@ -25,6 +25,9 @@ static struct snd_soc_card smdk; * Default CFG switch settings to use this driver: * * SMDK6410: Set CFG1 1-3 On, CFG2 1-4 Off + * SMDKC100: Set CFG6 1-3 On, CFG7 1 On + * SMDKC110: Set CFGB10 1-2 Off, CFGB12 1-3 On + * SMDKV210: Set CFGB10 1-2 Off, CFGB12 1-3 On */ /* |