diff options
Diffstat (limited to 'sound')
-rw-r--r-- | sound/pci/hda/hda_intel.c | 38 | ||||
-rw-r--r-- | sound/pci/hda/patch_realtek.c | 3 | ||||
-rw-r--r-- | sound/soc/codecs/nau8825.c | 1 | ||||
-rw-r--r-- | sound/usb/quirks-table.h | 47 |
4 files changed, 86 insertions, 3 deletions
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 293f3f213776..ceb162a9dcfd 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -180,7 +180,7 @@ static const struct kernel_param_ops param_ops_xint = { }; #define param_check_xint param_check_int -static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; +static int power_save = -1; module_param(power_save, xint, 0644); MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " "(in second, 0 = disable)."); @@ -2042,6 +2042,24 @@ out_free: return err; } +#ifdef CONFIG_PM +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known + * to causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; +#endif /* CONFIG_PM */ + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2054,6 +2072,7 @@ static int azx_probe_continue(struct azx *chip) struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; int dev = chip->dev_index; + int val; int err; hda->probe_continued = 1; @@ -2129,7 +2148,22 @@ static int azx_probe_continue(struct azx *chip) chip->running = 1; azx_add_card_list(chip); - snd_hda_set_power_save(&chip->bus, power_save * 1000); + + val = power_save; +#ifdef CONFIG_PM + if (val == -1) { + const struct snd_pci_quirk *q; + + val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && val) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + val = 0; + } + } +#endif /* CONFIG_PM */ + snd_hda_set_power_save(&chip->bus, val * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_autosuspend(&pci->dev); diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 89c166b97e81..974b74e91ef0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4480,13 +4480,14 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec, if (action == HDA_FIXUP_ACT_PRE_PROBE) { spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; + snd_hda_apply_pincfgs(codec, pincfgs); + } else if (action == HDA_FIXUP_ACT_INIT) { /* Enable DOCK device */ snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0); /* Enable DOCK device */ snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0); - snd_hda_apply_pincfgs(codec, pincfgs); } } diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index f9f2737c4ad2..a4871c4adcb0 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -882,6 +882,7 @@ static int nau8825_adc_event(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_POST_PMU: + msleep(125); regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); break; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 8a59d4782a0f..69bf5cf1e91e 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3277,4 +3277,51 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } }, +{ + /* + * Bower's & Wilkins PX headphones only support the 48 kHz sample rate + * even though it advertises more. The capture interface doesn't work + * even on windows. + */ + USB_DEVICE(0x19b5, 0x0021), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_MIXER, + }, + /* Capture */ + { + .ifnum = 1, + .type = QUIRK_IGNORE_INTERFACE, + }, + /* Playback */ + { + .ifnum = 2, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .channels = 2, + .iface = 2, + .altsetting = 1, + .altset_idx = 1, + .attributes = UAC_EP_CS_ATTR_FILL_MAX | + UAC_EP_CS_ATTR_SAMPLE_RATE, + .endpoint = 0x03, + .ep_attr = USB_ENDPOINT_XFER_ISOC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + } + } +}, + #undef USB_DEVICE_VENDOR_SPEC |