diff options
Diffstat (limited to 'sound')
-rw-r--r-- | sound/pci/hda/patch_hdmi.c | 11 | ||||
-rw-r--r-- | sound/pci/hda/patch_realtek.c | 68 | ||||
-rw-r--r-- | sound/soc/codecs/hdac_hdmi.c | 11 | ||||
-rw-r--r-- | sound/soc/codecs/max98090.c | 12 | ||||
-rw-r--r-- | sound/soc/codecs/rt5677-spi.c | 35 | ||||
-rw-r--r-- | sound/soc/fsl/fsl_esai.c | 2 | ||||
-rw-r--r-- | sound/usb/line6/toneport.c | 16 | ||||
-rw-r--r-- | sound/usb/mixer.c | 2 |
8 files changed, 95 insertions, 62 deletions
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 46f88dc7b7e8..af17265b829c 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1548,9 +1548,11 @@ static bool hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, ret = !repoll || !eld->monitor_present || eld->eld_valid; jack = snd_hda_jack_tbl_get(codec, pin_nid); - if (jack) + if (jack) { jack->block_report = !ret; - + jack->pin_sense = (eld->monitor_present && eld->eld_valid) ? + AC_PINSENSE_PRESENCE : 0; + } mutex_unlock(&per_pin->lock); return ret; } @@ -1660,6 +1662,11 @@ static void hdmi_repoll_eld(struct work_struct *work) container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work); struct hda_codec *codec = per_pin->codec; struct hdmi_spec *spec = codec->spec; + struct hda_jack_tbl *jack; + + jack = snd_hda_jack_tbl_get(codec, per_pin->pin_nid); + if (jack) + jack->jack_dirty = 1; if (per_pin->repoll_count++ > 6) per_pin->repoll_count = 0; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5ce28b4f0218..c50fb33e323c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -477,12 +477,45 @@ static void alc_auto_setup_eapd(struct hda_codec *codec, bool on) set_eapd(codec, *p, on); } +static int find_ext_mic_pin(struct hda_codec *codec); + +static void alc_headset_mic_no_shutup(struct hda_codec *codec) +{ + const struct hda_pincfg *pin; + int mic_pin = find_ext_mic_pin(codec); + int i; + + /* don't shut up pins when unloading the driver; otherwise it breaks + * the default pin setup at the next load of the driver + */ + if (codec->bus->shutdown) + return; + + snd_array_for_each(&codec->init_pins, i, pin) { + /* use read here for syncing after issuing each verb */ + if (pin->nid != mic_pin) + snd_hda_codec_read(codec, pin->nid, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, 0); + } + + codec->pins_shutup = 1; +} + static void alc_shutup_pins(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - if (!spec->no_shutup_pins) - snd_hda_shutup_pins(codec); + switch (codec->core.vendor_id) { + case 0x10ec0286: + case 0x10ec0288: + case 0x10ec0298: + alc_headset_mic_no_shutup(codec); + break; + default: + if (!spec->no_shutup_pins) + snd_hda_shutup_pins(codec); + break; + } } /* generic shutup callback; @@ -803,11 +836,10 @@ static int alc_init(struct hda_codec *codec) if (spec->init_hook) spec->init_hook(codec); + snd_hda_gen_init(codec); alc_fix_pll(codec); alc_auto_init_amp(codec, spec->init_amp); - snd_hda_gen_init(codec); - snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT); return 0; @@ -2924,27 +2956,6 @@ static int alc269_parse_auto_config(struct hda_codec *codec) return alc_parse_auto_config(codec, alc269_ignore, ssids); } -static int find_ext_mic_pin(struct hda_codec *codec); - -static void alc286_shutup(struct hda_codec *codec) -{ - const struct hda_pincfg *pin; - int i; - int mic_pin = find_ext_mic_pin(codec); - /* don't shut up pins when unloading the driver; otherwise it breaks - * the default pin setup at the next load of the driver - */ - if (codec->bus->shutdown) - return; - snd_array_for_each(&codec->init_pins, i, pin) { - /* use read here for syncing after issuing each verb */ - if (pin->nid != mic_pin) - snd_hda_codec_read(codec, pin->nid, 0, - AC_VERB_SET_PIN_WIDGET_CONTROL, 0); - } - codec->pins_shutup = 1; -} - static void alc269vb_toggle_power_output(struct hda_codec *codec, int power_up) { alc_update_coef_idx(codec, 0x04, 1 << 11, power_up ? (1 << 11) : 0); @@ -6931,6 +6942,10 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1558, 0x1325, "System76 Darter Pro (darp5)", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x8550, "System76 Gazelle (gaze14)", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x8551, "System76 Gazelle (gaze14)", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x8560, "System76 Gazelle (gaze14)", ALC269_FIXUP_HEADSET_MIC), + SND_PCI_QUIRK(0x1558, 0x8561, "System76 Gazelle (gaze14)", ALC269_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC233_FIXUP_LENOVO_MULTI_CODECS), SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE), @@ -6973,7 +6988,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x313c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION), SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC), - SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP), + SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI), SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x501a, "Thinkpad", ALC283_FIXUP_INT_MIC), SND_PCI_QUIRK(0x17aa, 0x501e, "Thinkpad L440", ALC292_FIXUP_TPT440_DOCK), @@ -7702,7 +7717,6 @@ static int patch_alc269(struct hda_codec *codec) case 0x10ec0286: case 0x10ec0288: spec->codec_variant = ALC269_TYPE_ALC286; - spec->shutup = alc286_shutup; break; case 0x10ec0298: spec->codec_variant = ALC269_TYPE_ALC298; diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index b19d7a3e7a2c..a23b1f2844e9 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -1872,6 +1872,17 @@ static int hdmi_codec_probe(struct snd_soc_component *component) hdmi->card = dapm->card->snd_card; /* + * Setup a device_link between card device and HDMI codec device. + * The card device is the consumer and the HDMI codec device is + * the supplier. With this setting, we can make sure that the audio + * domain in display power will be always turned on before operating + * on the HDMI audio codec registers. + * Let's use the flag DL_FLAG_AUTOREMOVE_CONSUMER. This can make + * sure the device link is freed when the machine driver is removed. + */ + device_link_add(component->card->dev, &hdev->dev, DL_FLAG_RPM_ACTIVE | + DL_FLAG_AUTOREMOVE_CONSUMER); + /* * hdac_device core already sets the state to active and calls * get_noresume. So enable runtime and set the device to suspend. */ diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index c97f21836c66..f06ae43650a3 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -1209,14 +1209,14 @@ static const struct snd_soc_dapm_widget max98090_dapm_widgets[] = { &max98090_right_rcv_mixer_controls[0], ARRAY_SIZE(max98090_right_rcv_mixer_controls)), - SND_SOC_DAPM_MUX("LINMOD Mux", M98090_REG_LOUTR_MIXER, - M98090_LINMOD_SHIFT, 0, &max98090_linmod_mux), + SND_SOC_DAPM_MUX("LINMOD Mux", SND_SOC_NOPM, 0, 0, + &max98090_linmod_mux), - SND_SOC_DAPM_MUX("MIXHPLSEL Mux", M98090_REG_HP_CONTROL, - M98090_MIXHPLSEL_SHIFT, 0, &max98090_mixhplsel_mux), + SND_SOC_DAPM_MUX("MIXHPLSEL Mux", SND_SOC_NOPM, 0, 0, + &max98090_mixhplsel_mux), - SND_SOC_DAPM_MUX("MIXHPRSEL Mux", M98090_REG_HP_CONTROL, - M98090_MIXHPRSEL_SHIFT, 0, &max98090_mixhprsel_mux), + SND_SOC_DAPM_MUX("MIXHPRSEL Mux", SND_SOC_NOPM, 0, 0, + &max98090_mixhprsel_mux), SND_SOC_DAPM_PGA("HP Left Out", M98090_REG_OUTPUT_ENABLE, M98090_HPLEN_SHIFT, 0, NULL, 0), diff --git a/sound/soc/codecs/rt5677-spi.c b/sound/soc/codecs/rt5677-spi.c index 84501c2020c7..a2c7ffa5f400 100644 --- a/sound/soc/codecs/rt5677-spi.c +++ b/sound/soc/codecs/rt5677-spi.c @@ -57,13 +57,15 @@ static DEFINE_MUTEX(spi_mutex); * RT5677_SPI_READ/WRITE_32: Transfer 4 bytes * RT5677_SPI_READ/WRITE_BURST: Transfer any multiples of 8 bytes * - * For example, reading 260 bytes at 0x60030002 uses the following commands: - * 0x60030002 RT5677_SPI_READ_16 2 bytes + * Note: + * 16 Bit writes and reads are restricted to the address range + * 0x18020000 ~ 0x18021000 + * + * For example, reading 256 bytes at 0x60030004 uses the following commands: * 0x60030004 RT5677_SPI_READ_32 4 bytes * 0x60030008 RT5677_SPI_READ_BURST 240 bytes * 0x600300F8 RT5677_SPI_READ_BURST 8 bytes * 0x60030100 RT5677_SPI_READ_32 4 bytes - * 0x60030104 RT5677_SPI_READ_16 2 bytes * * Input: * @read: true for read commands; false for write commands @@ -78,15 +80,13 @@ static u8 rt5677_spi_select_cmd(bool read, u32 align, u32 remain, u32 *len) { u8 cmd; - if (align == 2 || align == 6 || remain == 2) { - cmd = RT5677_SPI_READ_16; - *len = 2; - } else if (align == 4 || remain <= 6) { + if (align == 4 || remain <= 4) { cmd = RT5677_SPI_READ_32; *len = 4; } else { cmd = RT5677_SPI_READ_BURST; - *len = min_t(u32, remain & ~7, RT5677_SPI_BURST_LEN); + *len = (((remain - 1) >> 3) + 1) << 3; + *len = min_t(u32, *len, RT5677_SPI_BURST_LEN); } return read ? cmd : cmd + 1; } @@ -107,7 +107,7 @@ static void rt5677_spi_reverse(u8 *dst, u32 dstlen, const u8 *src, u32 srclen) } } -/* Read DSP address space using SPI. addr and len have to be 2-byte aligned. */ +/* Read DSP address space using SPI. addr and len have to be 4-byte aligned. */ int rt5677_spi_read(u32 addr, void *rxbuf, size_t len) { u32 offset; @@ -123,7 +123,7 @@ int rt5677_spi_read(u32 addr, void *rxbuf, size_t len) if (!g_spi) return -ENODEV; - if ((addr & 1) || (len & 1)) { + if ((addr & 3) || (len & 3)) { dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len); return -EACCES; } @@ -158,13 +158,13 @@ int rt5677_spi_read(u32 addr, void *rxbuf, size_t len) } EXPORT_SYMBOL_GPL(rt5677_spi_read); -/* Write DSP address space using SPI. addr has to be 2-byte aligned. - * If len is not 2-byte aligned, an extra byte of zero is written at the end +/* Write DSP address space using SPI. addr has to be 4-byte aligned. + * If len is not 4-byte aligned, then extra zeros are written at the end * as padding. */ int rt5677_spi_write(u32 addr, const void *txbuf, size_t len) { - u32 offset, len_with_pad = len; + u32 offset; int status = 0; struct spi_transfer t; struct spi_message m; @@ -177,22 +177,19 @@ int rt5677_spi_write(u32 addr, const void *txbuf, size_t len) if (!g_spi) return -ENODEV; - if (addr & 1) { + if (addr & 3) { dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len); return -EACCES; } - if (len & 1) - len_with_pad = len + 1; - memset(&t, 0, sizeof(t)); t.tx_buf = buf; t.speed_hz = RT5677_SPI_FREQ; spi_message_init_with_transfers(&m, &t, 1); - for (offset = 0; offset < len_with_pad;) { + for (offset = 0; offset < len;) { spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7, - len_with_pad - offset, &t.len); + len - offset, &t.len); /* Construct SPI message header */ buf[0] = spi_cmd; diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index 3623aa9a6f2e..15202a637197 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -251,7 +251,7 @@ static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, break; case ESAI_HCKT_EXTAL: ecr |= ESAI_ECR_ETI; - /* fall through */ + break; case ESAI_HCKR_EXTAL: ecr |= ESAI_ECR_ERI; break; diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index 19bee725de00..325b07b98b3c 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -54,8 +54,8 @@ struct usb_line6_toneport { /* Firmware version (x 100) */ u8 firmware_version; - /* Timer for delayed PCM startup */ - struct timer_list timer; + /* Work for delayed PCM startup */ + struct delayed_work pcm_work; /* Device type */ enum line6_device_type type; @@ -241,9 +241,10 @@ static int snd_toneport_source_put(struct snd_kcontrol *kcontrol, return 1; } -static void toneport_start_pcm(struct timer_list *t) +static void toneport_start_pcm(struct work_struct *work) { - struct usb_line6_toneport *toneport = from_timer(toneport, t, timer); + struct usb_line6_toneport *toneport = + container_of(work, struct usb_line6_toneport, pcm_work.work); struct usb_line6 *line6 = &toneport->line6; line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR, true); @@ -393,7 +394,8 @@ static int toneport_setup(struct usb_line6_toneport *toneport) if (toneport_has_led(toneport)) toneport_update_led(toneport); - mod_timer(&toneport->timer, jiffies + TONEPORT_PCM_DELAY * HZ); + schedule_delayed_work(&toneport->pcm_work, + msecs_to_jiffies(TONEPORT_PCM_DELAY * 1000)); return 0; } @@ -405,7 +407,7 @@ static void line6_toneport_disconnect(struct usb_line6 *line6) struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)line6; - del_timer_sync(&toneport->timer); + cancel_delayed_work_sync(&toneport->pcm_work); if (toneport_has_led(toneport)) toneport_remove_leds(toneport); @@ -422,7 +424,7 @@ static int toneport_init(struct usb_line6 *line6, struct usb_line6_toneport *toneport = (struct usb_line6_toneport *) line6; toneport->type = id->driver_info; - timer_setup(&toneport->timer, toneport_start_pcm, 0); + INIT_DELAYED_WORK(&toneport->pcm_work, toneport_start_pcm); line6->disconnect = line6_toneport_disconnect; diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index e7d441d0e839..5a10b1b7f6b9 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2679,6 +2679,8 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, kctl = snd_ctl_new1(&mixer_selectunit_ctl, cval); if (! kctl) { usb_audio_err(state->chip, "cannot malloc kcontrol\n"); + for (i = 0; i < desc->bNrInPins; i++) + kfree(namelist[i]); kfree(namelist); kfree(cval); return -ENOMEM; |