summaryrefslogtreecommitdiff
path: root/tools
diff options
context:
space:
mode:
Diffstat (limited to 'tools')
-rwxr-xr-xtools/testing/ktest/ktest.pl515
-rw-r--r--tools/testing/ktest/sample.conf146
2 files changed, 553 insertions, 108 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 8d02ccb10c59..30e2befd6f2a 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -42,6 +42,7 @@ $default{"BISECT_MANUAL"} = 0;
$default{"BISECT_SKIP"} = 1;
$default{"SUCCESS_LINE"} = "login:";
$default{"DETECT_TRIPLE_FAULT"} = 1;
+$default{"NO_INSTALL"} = 0;
$default{"BOOTED_TIMEOUT"} = 1;
$default{"DIE_ON_FAILURE"} = 1;
$default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
@@ -84,6 +85,7 @@ my $grub_number;
my $target;
my $make;
my $post_install;
+my $no_install;
my $noclean;
my $minconfig;
my $start_minconfig;
@@ -115,6 +117,7 @@ my $timeout;
my $booted_timeout;
my $detect_triplefault;
my $console;
+my $reboot_success_line;
my $success_line;
my $stop_after_success;
my $stop_after_failure;
@@ -130,6 +133,12 @@ my %config_help;
my %variable;
my %force_config;
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
$config_help{"MACHINE"} = << "EOF"
The machine hostname that you will test.
EOF
@@ -241,6 +250,7 @@ sub read_yn {
sub get_ktest_config {
my ($config) = @_;
+ my $ans;
return if (defined($opt{$config}));
@@ -254,16 +264,17 @@ sub get_ktest_config {
if (defined($default{$config})) {
print "\[$default{$config}\] ";
}
- $entered_configs{$config} = <STDIN>;
- $entered_configs{$config} =~ s/^\s*(.*\S)\s*$/$1/;
- if ($entered_configs{$config} =~ /^\s*$/) {
+ $ans = <STDIN>;
+ $ans =~ s/^\s*(.*\S)\s*$/$1/;
+ if ($ans =~ /^\s*$/) {
if ($default{$config}) {
- $entered_configs{$config} = $default{$config};
+ $ans = $default{$config};
} else {
print "Your answer can not be blank\n";
next;
}
}
+ $entered_configs{$config} = process_variables($ans);
last;
}
}
@@ -298,7 +309,7 @@ sub get_ktest_configs {
}
sub process_variables {
- my ($value) = @_;
+ my ($value, $remove_undef) = @_;
my $retval = "";
# We want to check for '\', and it is just easier
@@ -316,6 +327,10 @@ sub process_variables {
$retval = "$retval$begin";
if (defined($variable{$var})) {
$retval = "$retval$variable{$var}";
+ } elsif (defined($remove_undef) && $remove_undef) {
+ # for if statements, any variable that is not defined,
+ # we simple convert to 0
+ $retval = "${retval}0";
} else {
# put back the origin piece.
$retval = "$retval\$\{$var\}";
@@ -331,10 +346,17 @@ sub process_variables {
}
sub set_value {
- my ($lvalue, $rvalue) = @_;
+ my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
if (defined($opt{$lvalue})) {
- die "Error: Option $lvalue defined more than once!\n";
+ if (!$override || defined(${$overrides}{$lvalue})) {
+ my $extra = "";
+ if ($override) {
+ $extra = "In the same override section!\n";
+ }
+ die "$name: $.: Option $lvalue defined more than once!\n$extra";
+ }
+ ${$overrides}{$lvalue} = $rvalue;
}
if ($rvalue =~ /^\s*$/) {
delete $opt{$lvalue};
@@ -355,86 +377,274 @@ sub set_variable {
}
}
-sub read_config {
- my ($config) = @_;
+sub process_compare {
+ my ($lval, $cmp, $rval) = @_;
+
+ # remove whitespace
+
+ $lval =~ s/^\s*//;
+ $lval =~ s/\s*$//;
+
+ $rval =~ s/^\s*//;
+ $rval =~ s/\s*$//;
+
+ if ($cmp eq "==") {
+ return $lval eq $rval;
+ } elsif ($cmp eq "!=") {
+ return $lval ne $rval;
+ }
+
+ my $statement = "$lval $cmp $rval";
+ my $ret = eval $statement;
+
+ # $@ stores error of eval
+ if ($@) {
+ return -1;
+ }
+
+ return $ret;
+}
+
+sub value_defined {
+ my ($val) = @_;
+
+ return defined($variable{$2}) ||
+ defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+ my ($name, $val) = @_;
+
+ my $c = $d++;
+
+ while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+ my $express = $1;
+
+ if (process_expression($name, $express)) {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+ } else {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+ }
+ }
+
+ $d--;
+ my $OR = "\\|\\|";
+ my $AND = "\\&\\&";
+
+ while ($val =~ s/^(.*?)($OR|$AND)//) {
+ my $express = $1;
+ my $op = $2;
+
+ if (process_expression($name, $express)) {
+ if ($op eq "||") {
+ return 1;
+ }
+ } else {
+ if ($op eq "&&") {
+ return 0;
+ }
+ }
+ }
+
+ if ($val =~ /(.*)(==|\!=|>=|<=|>|<)(.*)/) {
+ my $ret = process_compare($1, $2, $3);
+ if ($ret < 0) {
+ die "$name: $.: Unable to process comparison\n";
+ }
+ return $ret;
+ }
+
+ if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+ if (defined $1) {
+ return !value_defined($2);
+ } else {
+ return value_defined($2);
+ }
+ }
+
+ if ($val =~ /^\s*0\s*$/) {
+ return 0;
+ } elsif ($val =~ /^\s*\d+\s*$/) {
+ return 1;
+ }
+
+ die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+ my ($name, $value) = @_;
+
+ # Convert variables and replace undefined ones with 0
+ my $val = process_variables($value, 1);
+ my $ret = process_expression $name, $val;
+
+ return $ret;
+}
- open(IN, $config) || die "can't read file $config";
+sub __read_config {
+ my ($config, $current_test_num) = @_;
+
+ my $in;
+ open($in, $config) || die "can't read file $config";
my $name = $config;
$name =~ s,.*/(.*),$1,;
- my $test_num = 0;
+ my $test_num = $$current_test_num;
my $default = 1;
my $repeat = 1;
my $num_tests_set = 0;
my $skip = 0;
my $rest;
+ my $line;
my $test_case = 0;
+ my $if = 0;
+ my $if_set = 0;
+ my $override = 0;
- while (<IN>) {
+ my %overrides;
+
+ while (<$in>) {
# ignore blank lines and comments
next if (/^\s*$/ || /\s*\#/);
- if (/^\s*TEST_START(.*)/) {
+ if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
- $rest = $1;
+ my $type = $1;
+ $rest = $2;
+ $line = $2;
- if ($num_tests_set) {
- die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
- }
+ my $old_test_num;
+ my $old_repeat;
+ $override = 0;
+
+ if ($type eq "TEST_START") {
+
+ if ($num_tests_set) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
- my $old_test_num = $test_num;
- my $old_repeat = $repeat;
+ $old_test_num = $test_num;
+ $old_repeat = $repeat;
- $test_num += $repeat;
- $default = 0;
- $repeat = 1;
+ $test_num += $repeat;
+ $default = 0;
+ $repeat = 1;
+ } else {
+ $default = 1;
+ }
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
+ # If SKIP is anywhere in the line, the command will be skipped
+ if ($rest =~ s/\s+SKIP\b//) {
$skip = 1;
} else {
$test_case = 1;
$skip = 0;
}
- if ($rest =~ /\s+ITERATE\s+(\d+)(.*)$/) {
- $repeat = $1;
- $rest = $2;
- $repeat_tests{"$test_num"} = $repeat;
+ if ($rest =~ s/\sELSE\b//) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
+ $if = 0;
+
+ if ($if_set) {
+ $skip = 1;
+ } else {
+ $skip = 0;
+ }
}
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
- $skip = 1;
+ if ($rest =~ s/\sIF\s+(.*)//) {
+ if (process_if($name, $1)) {
+ $if_set = 1;
+ } else {
+ $skip = 1;
+ }
+ $if = 1;
+ } else {
+ $if = 0;
+ $if_set = 0;
}
- if ($rest !~ /^\s*$/) {
- die "$name: $.: Gargbage found after TEST_START\n$_";
+ if (!$skip) {
+ if ($type eq "TEST_START") {
+ if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+ $repeat = $1;
+ $repeat_tests{"$test_num"} = $repeat;
+ }
+ } elsif ($rest =~ s/\sOVERRIDE\b//) {
+ # DEFAULT only
+ $override = 1;
+ # Clear previous overrides
+ %overrides = ();
+ }
+ }
+
+ if (!$skip && $rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after $type\n$_";
}
- if ($skip) {
+ if ($skip && $type eq "TEST_START") {
$test_num = $old_test_num;
$repeat = $old_repeat;
}
- } elsif (/^\s*DEFAULTS(.*)$/) {
- $default = 1;
-
+ } elsif (/^\s*ELSE\b(.*)$/) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
$rest = $1;
-
- if ($rest =~ /\s+SKIP(.*)/) {
- $rest = $1;
+ if ($if_set) {
$skip = 1;
+ $rest = "";
} else {
$skip = 0;
+
+ if ($rest =~ /\sIF\s+(.*)/) {
+ # May be a ELSE IF section.
+ if (!process_if($name, $1)) {
+ $skip = 1;
+ }
+ $rest = "";
+ } else {
+ $if = 0;
+ }
}
if ($rest !~ /^\s*$/) {
die "$name: $.: Gargbage found after DEFAULTS\n$_";
}
+ } elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+ next if ($skip);
+
+ if (!$default) {
+ die "$name: $.: INCLUDE can only be done in default sections\n$_";
+ }
+
+ my $file = process_variables($1);
+
+ if ($file !~ m,^/,) {
+ # check the path of the config file first
+ if ($config =~ m,(.*)/,) {
+ if (-f "$1/$file") {
+ $file = "$1/$file";
+ }
+ }
+ }
+
+ if ( ! -r $file ) {
+ die "$name: $.: Can't read file $file\n$_";
+ }
+
+ if (__read_config($file, \$test_num)) {
+ $test_case = 1;
+ }
+
} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
next if ($skip);
@@ -460,10 +670,10 @@ sub read_config {
}
if ($default || $lvalue =~ /\[\d+\]$/) {
- set_value($lvalue, $rvalue);
+ set_value($lvalue, $rvalue, $override, \%overrides, $name);
} else {
my $val = "$lvalue\[$test_num\]";
- set_value($val, $rvalue);
+ set_value($val, $rvalue, $override, \%overrides, $name);
if ($repeat > 1) {
$repeats{$val} = $repeat;
@@ -490,13 +700,26 @@ sub read_config {
}
}
- close(IN);
-
if ($test_num) {
$test_num += $repeat - 1;
$opt{"NUM_TESTS"} = $test_num;
}
+ close($in);
+
+ $$current_test_num = $test_num;
+
+ return $test_case;
+}
+
+sub read_config {
+ my ($config) = @_;
+
+ my $test_case;
+ my $test_num = 0;
+
+ $test_case = __read_config $config, \$test_num;
+
# make sure we have all mandatory configs
get_ktest_configs;
@@ -603,8 +826,20 @@ sub doprint {
}
sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
sub reboot {
+ my ($time) = @_;
+
+ if (defined($time)) {
+ start_monitor;
+ # flush out current monitor
+ # May contain the reboot success line
+ wait_for_monitor 1;
+ }
+
# try to reboot normally
if (run_command $reboot) {
if (defined($powercycle_after_reboot)) {
@@ -615,12 +850,17 @@ sub reboot {
# nope? power cycle it.
run_command "$power_cycle";
}
+
+ if (defined($time)) {
+ wait_for_monitor($time, $reboot_success_line);
+ end_monitor;
+ }
}
sub do_not_reboot {
my $i = $iteration;
- return $test_type eq "build" ||
+ return $test_type eq "build" || $no_reboot ||
($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
}
@@ -693,16 +933,29 @@ sub end_monitor {
}
sub wait_for_monitor {
- my ($time) = @_;
+ my ($time, $stop) = @_;
+ my $full_line = "";
my $line;
+ my $booted = 0;
doprint "** Wait for monitor to settle down **\n";
# read the monitor and wait for the system to calm down
- do {
+ while (!$booted) {
$line = wait_for_input($monitor_fp, $time);
- print "$line" if (defined($line));
- } while (defined($line));
+ last if (!defined($line));
+ print "$line";
+ $full_line .= $line;
+
+ if (defined($stop) && $full_line =~ /$stop/) {
+ doprint "wait for monitor detected $stop\n";
+ $booted = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ }
print "** Monitor flushed **\n";
}
@@ -719,10 +972,7 @@ sub fail {
# no need to reboot for just building.
if (!do_not_reboot) {
doprint "REBOOTING\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
my $name = "";
@@ -854,9 +1104,12 @@ sub get_grub_index {
open(IN, "$ssh_grub |")
or die "unable to get menu.lst";
+ my $found = 0;
+
while (<IN>) {
if (/^\s*title\s+$grub_menu\s*$/) {
$grub_number++;
+ $found = 1;
last;
} elsif (/^\s*title\s/) {
$grub_number++;
@@ -865,7 +1118,7 @@ sub get_grub_index {
close(IN);
die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
- if ($grub_number < 0);
+ if (!$found);
doprint "$grub_number\n";
}
@@ -902,7 +1155,8 @@ sub wait_for_input
sub reboot_to {
if ($reboot_type eq "grub") {
- run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch && reboot)'";
+ run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+ reboot;
return;
}
@@ -1083,6 +1337,8 @@ sub do_post_install {
sub install {
+ return if ($no_install);
+
run_scp "$outputdir/$build_target", "$target_image" or
dodie "failed to copy image";
@@ -1140,6 +1396,11 @@ sub get_version {
}
sub start_monitor_and_boot {
+ # Make sure the stable kernel has finished booting
+ start_monitor;
+ wait_for_monitor 5;
+ end_monitor;
+
get_grub_index;
get_version;
install;
@@ -1250,6 +1511,10 @@ sub build {
unlink $buildlog;
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
if (defined($pre_build)) {
my $ret = run_command $pre_build;
if (!$ret && defined($pre_build_die) &&
@@ -1272,15 +1537,15 @@ sub build {
# allow for empty configs
run_command "touch $output_config";
- run_command "mv $output_config $outputdir/config_temp" or
- dodie "moving .config";
+ if (!$noclean) {
+ run_command "mv $output_config $outputdir/config_temp" or
+ dodie "moving .config";
- if (!$noclean && !run_command "$make mrproper") {
- dodie "make mrproper";
- }
+ run_command "$make mrproper" or dodie "make mrproper";
- run_command "mv $outputdir/config_temp $output_config" or
- dodie "moving config_temp";
+ run_command "mv $outputdir/config_temp $output_config" or
+ dodie "moving config_temp";
+ }
} elsif (!$noclean) {
unlink "$output_config";
@@ -1318,10 +1583,15 @@ sub build {
if (!$build_ret) {
# bisect may need this to pass
- return 0 if ($in_bisect);
+ if ($in_bisect) {
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
fail "failed build" and return 0;
}
+ $no_reboot = $save_no_reboot;
+
return 1;
}
@@ -1356,10 +1626,7 @@ sub success {
if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
doprint "Reboot and wait $sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
}
@@ -1500,10 +1767,7 @@ sub run_git_bisect {
sub bisect_reboot {
doprint "Reboot and sleep $bisect_sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $bisect_sleep_time;
- end_monitor;
+ reboot $bisect_sleep_time;
}
# returns 1 on success, 0 on failure, -1 on skip
@@ -2066,10 +2330,7 @@ sub config_bisect {
sub patchcheck_reboot {
doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $patchcheck_sleep_time;
- end_monitor;
+ reboot $patchcheck_sleep_time;
}
sub patchcheck {
@@ -2178,12 +2439,31 @@ sub patchcheck {
}
my %depends;
+my %depcount;
my $iflevel = 0;
my @ifdeps;
# prevent recursion
my %read_kconfigs;
+sub add_dep {
+ # $config depends on $dep
+ my ($config, $dep) = @_;
+
+ if (defined($depends{$config})) {
+ $depends{$config} .= " " . $dep;
+ } else {
+ $depends{$config} = $dep;
+ }
+
+ # record the number of configs depending on $dep
+ if (defined $depcount{$dep}) {
+ $depcount{$dep}++;
+ } else {
+ $depcount{$dep} = 1;
+ }
+}
+
# taken from streamline_config.pl
sub read_kconfig {
my ($kconfig) = @_;
@@ -2230,30 +2510,19 @@ sub read_kconfig {
$config = $2;
for (my $i = 0; $i < $iflevel; $i++) {
- if ($i) {
- $depends{$config} .= " " . $ifdeps[$i];
- } else {
- $depends{$config} = $ifdeps[$i];
- }
- $state = "DEP";
+ add_dep $config, $ifdeps[$i];
}
# collect the depends for the config
} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
- if (defined($depends{$1})) {
- $depends{$config} .= " " . $1;
- } else {
- $depends{$config} = $1;
- }
+ add_dep $config, $1;
# Get the configs that select this config
- } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
- if (defined($depends{$1})) {
- $depends{$1} .= " " . $config;
- } else {
- $depends{$1} = $config;
- }
+ } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+ # selected by depends on config
+ add_dep $1, $config;
# Check for if statements
} elsif (/^if\s+(.*\S)\s*$/) {
@@ -2365,11 +2634,18 @@ sub make_new_config {
close OUT;
}
+sub chomp_config {
+ my ($config) = @_;
+
+ $config =~ s/CONFIG_//;
+
+ return $config;
+}
+
sub get_depends {
my ($dep) = @_;
- my $kconfig = $dep;
- $kconfig =~ s/CONFIG_//;
+ my $kconfig = chomp_config $dep;
$dep = $depends{"$kconfig"};
@@ -2419,8 +2695,7 @@ sub test_this_config {
return undef;
}
- my $kconfig = $config;
- $kconfig =~ s/CONFIG_//;
+ my $kconfig = chomp_config $config;
# Test dependencies first
if (defined($depends{"$kconfig"})) {
@@ -2510,6 +2785,14 @@ sub make_min_config {
my @config_keys = keys %min_configs;
+ # All configs need a depcount
+ foreach my $config (@config_keys) {
+ my $kconfig = chomp_config $config;
+ if (!defined $depcount{$kconfig}) {
+ $depcount{$kconfig} = 0;
+ }
+ }
+
# Remove anything that was set by the make allnoconfig
# we shouldn't need them as they get set for us anyway.
foreach my $config (@config_keys) {
@@ -2548,8 +2831,13 @@ sub make_min_config {
# Now disable each config one by one and do a make oldconfig
# till we find a config that changes our list.
- # Put configs that did not modify the config at the end.
my @test_configs = keys %min_configs;
+
+ # Sort keys by who is most dependent on
+ @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+ @test_configs ;
+
+ # Put configs that did not modify the config at the end.
my $reset = 1;
for (my $i = 0; $i < $#test_configs; $i++) {
if (!defined($nochange_config{$test_configs[0]})) {
@@ -2659,10 +2947,7 @@ sub make_min_config {
}
doprint "Reboot and wait $sleep_time seconds\n";
- reboot;
- start_monitor;
- wait_for_monitor $sleep_time;
- end_monitor;
+ reboot $sleep_time;
}
success $i;
@@ -2783,6 +3068,9 @@ sub set_test_option {
# First we need to do is the builds
for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+ # Do not reboot on failing test options
+ $no_reboot = 1;
+
$iteration = $i;
my $makecmd = set_test_option("MAKE_CMD", $i);
@@ -2811,6 +3099,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$reboot_type = set_test_option("REBOOT_TYPE", $i);
$grub_menu = set_test_option("GRUB_MENU", $i);
$post_install = set_test_option("POST_INSTALL", $i);
+ $no_install = set_test_option("NO_INSTALL", $i);
$reboot_script = set_test_option("REBOOT_SCRIPT", $i);
$reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i);
$poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i);
@@ -2832,6 +3121,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$console = set_test_option("CONSOLE", $i);
$detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
$success_line = set_test_option("SUCCESS_LINE", $i);
+ $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
$stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
$stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
$stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
@@ -2850,9 +3140,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
chdir $builddir || die "can't change directory to $builddir";
- if (!-d $tmpdir) {
- mkpath($tmpdir) or
- die "can't create $tmpdir";
+ foreach my $dir ($tmpdir, $outputdir) {
+ if (!-d $dir) {
+ mkpath($dir) or
+ die "can't create $dir";
+ }
}
$ENV{"SSH_USER"} = $ssh_user;
@@ -2889,8 +3181,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$run_type = "ERROR";
}
+ my $installme = "";
+ $installme = " no_install" if ($no_install);
+
doprint "\n\n";
- doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type\n\n";
+ doprint "RUNNING TEST $i of $opt{NUM_TESTS} with option $test_type $run_type$installme\n\n";
unlink $dmesg;
unlink $buildlog;
@@ -2911,6 +3206,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
die "failed to checkout $checkout";
}
+ $no_reboot = 0;
+
+
if ($test_type eq "bisect") {
bisect $i;
next;
@@ -2929,6 +3227,13 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
build $build_type or next;
}
+ if ($test_type eq "install") {
+ get_version;
+ install;
+ success $i;
+ next;
+ }
+
if ($test_type ne "build") {
my $failed = 0;
start_monitor_and_boot or $failed = 1;
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index b8bcd14b5a4d..dbedfa196727 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -72,6 +72,128 @@
# the same option name under the same test or as default
# ktest will fail to execute, and no tests will run.
#
+# DEFAULTS OVERRIDE
+#
+# Options defined in the DEFAULTS section can not be duplicated
+# even if they are defined in two different DEFAULT sections.
+# This is done to catch mistakes where an option is added but
+# the previous option was forgotten about and not commented.
+#
+# The OVERRIDE keyword can be added to a section to allow this
+# section to override other DEFAULT sections values that have
+# been defined previously. It will only override options that
+# have been defined before its use. Options defined later
+# in a non override section will still error. The same option
+# can not be defined in the same section even if that section
+# is marked OVERRIDE.
+#
+#
+#
+# Both TEST_START and DEFAULTS sections can also have the IF keyword
+# The value after the IF must evaluate into a 0 or non 0 positive
+# integer, and can use the config variables (explained below).
+#
+# DEFAULTS IF ${IS_X86_32}
+#
+# The above will process the DEFAULTS section if the config
+# variable IS_X86_32 evaluates to a non zero positive integer
+# otherwise if it evaluates to zero, it will act the same
+# as if the SKIP keyword was used.
+#
+# The ELSE keyword can be used directly after a section with
+# a IF statement.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE
+#
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal
+#
+#
+# The ELSE keyword can also contain an IF statement to allow multiple
+# if then else sections. But all the sections must be either
+# DEFAULT or TEST_START, they can not be a mixture.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE IF ${RUN_DISK_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests
+#
+# ELSE IF ${RUN_CPU_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu
+#
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# The if statement may also have comparisons that will and for
+# == and !=, strings may be used for both sides.
+#
+# BOX_TYPE := x86_32
+#
+# DEFAULTS IF ${BOX_TYPE} == x86_32
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64
+#
+# The DEFINED keyword can be used by the IF statements too.
+# It returns true if the given config variable or option has been defined
+# or false otherwise.
+#
+#
+# DEFAULTS IF DEFINED USE_CC
+# CC := ${USE_CC}
+# ELSE
+# CC := gcc
+#
+#
+# As well as NOT DEFINED.
+#
+# DEFAULTS IF NOT DEFINED MAKE_CMD
+# MAKE_CMD := make ARCH=x86
+#
+#
+# And/or ops (&&,||) may also be used to make complex conditionals.
+#
+# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
+#
+# Notice the use of paranthesis. Without any paranthesis the above would be
+# processed the same as:
+#
+# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
+#
+#
+#
+# INCLUDE file
+#
+# The INCLUDE keyword may be used in DEFAULT sections. This will
+# read another config file and process that file as well. The included
+# file can include other files, add new test cases or default
+# statements. Config variables will be passed to these files and changes
+# to config variables will be seen by top level config files. Including
+# a file is processed just like the contents of the file was cut and pasted
+# into the top level file, except, that include files that end with
+# TEST_START sections will have that section ended at the end of
+# the include file. That is, an included file is included followed
+# by another DEFAULT keyword.
+#
+# Unlike other files referenced in this config, the file path does not need
+# to be absolute. If the file does not start with '/', then the directory
+# that the current config file was located in is used. If no config by the
+# given name is found there, then the current directory is searched.
+#
+# INCLUDE myfile
+# DEFAULT
+#
+# is the same as:
+#
+# INCLUDE myfile
+#
+# Note, if the include file does not contain a full path, the file is
+# searched first by the location of the original include file, and then
+# by the location that ktest.pl was executed in.
+#
#### Config variables ####
#
@@ -253,9 +375,10 @@
# The default test type (default test)
# The test types may be:
-# build - only build the kernel, do nothing else
-# boot - build and boot the kernel
-# test - build, boot and if TEST is set, run the test script
+# build - only build the kernel, do nothing else
+# install - build and install, but do nothing else (does not reboot)
+# boot - build, install, and boot the kernel
+# test - build, boot and if TEST is set, run the test script
# (If TEST is not set, it defaults back to boot)
# bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
# patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
@@ -293,6 +416,13 @@
# or on some systems:
#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+# If for some reason you just want to boot the kernel and you do not
+# want the test to install anything new. For example, you may just want
+# to boot test the same kernel over and over and do not want to go through
+# the hassle of installing anything, you can set this option to 1
+# (default 0)
+#NO_INSTALL = 1
+
# If there is a script that you require to run before the build is done
# you can specify it with PRE_BUILD.
#
@@ -415,6 +545,14 @@
# (default "login:")
#SUCCESS_LINE = login:
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
# In case the console constantly fills the screen, having
# a specified time to stop the test after success is recommended.
# (in seconds)
@@ -480,6 +618,8 @@
# another test. If a reboot to the reliable kernel happens,
# we wait SLEEP_TIME for the console to stop producing output
# before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
# (default 60)
#SLEEP_TIME = 60