summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-14Fix serial bug when recieving a file3.0-vybrid-ts2Andy Voltz
When serial-transmit a file from host to target, an error "BUG: scheduling while atomic: cat/998/0x00010002" occurs. BUG: scheduling while atomic: cat/998/0x00010002 Modules linked in: Pid: 998, comm: cat CPU: 0 Not tainted (3.0.15 #1) PC is at n_tty_write+0x260/0x43c LR is at tty_write_room+0x20/0x2c pc : <80204700> lr : <80206194> psr: 60000013 sp : 863b9e78 ip : 8038e378 fp : 863b9ec4 r10: 00000fff r9 : 863b6400 r8 : 86165d80 r7 : 863b8000 r6 : 86368b6c r5 : 86368800 r4 : 00000002 r3 : 00000010 r2 : 00000000 r1 : 00000040 r0 : 00000002 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 863f8059 DAC: 00000015 <80031f5c> (show_regs+0x0/0x54) from <803761f0> (__schedule_bug+0x4c/0x60) r4:863b9e30 r3:60000193 <803761a4> (__schedule_bug+0x0/0x60) from <8037941c> (__schedule+0x35c/0x3c4) Thanks to Tadayoshi Arai <ara@lineo.co.jp> for reporting this and submitting this patch
2013-03-10fix scheduler not seeing time pass, would not interrupt cpu bound processRoshni Shah
Signed-off-by: Ed Nash <ed@kidlearn.com>
2013-02-17extend timout for sema4 grab3.0-vybrid-ts1Ed Nash
2013-02-17add semaphore protection with MQX of I2C busEd Nash
2012-12-12fsl_nfc: Add default partitioningJustin Waters
Allows the NAND to properly probe if cmdline partitioning is not specified. Otherwise, it will fail silently.
2012-12-12Default configuration update for CAAM driverJason Jin
manually integrate from the CAAM part by Jason Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-12-12Vybrid CAAM driverJason Jin
From Singh Pradip-B09147. Integrate by Jason Jin Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-12-12mvf: update default kernel config for FaradayAlison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-12-12ENGR00181365-2: ADC: Add driver support for ADC VybridWang Xiaojun
Add driver support for ADC Vybrid. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-12-12ENGR00181365-1: ADC: Add platform support for ADC driverWang Xiaojun
Add platform support for ADC driver. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-12-12ENGR00216081-2:Errata workaround for usb suspend and resumeJingchang Lu
Toggle PHYPWD.PWD after set PORTSC.SUSP with 8ms to trigger the LS_SE0/LS_EOP append flag after resume within UTM block. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-12-12ENGR00216081-1:Add USB host and gadget PM supportJingchang Lu
Handle usb suspend/resume, currently the BSP doesn't support usb plug/unplug wakeup. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-12-12ENGR00216087-2:Add Vybrid ASRC platform deviceJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-12-12ENGR00216087-1: ASRC support for VybridJingchang Lu
The ASRC driver supports stereo audio streams resample, the ASRCK1 serial clock using audio external clock source can not support 44.1K sample rate due to divider and prescaler restriction. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-12-12ENGR00216076-3: DSPI: Update DSPI driver for PMAlison Wang
Update power management part for DSPI driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-12-12ENGR00216076-2: DCU: Update DCU driver for PM and blending issueAlison Wang
Fix layers blending and reinitialization issue for DCU driver. Update power management part for DCU driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-12-12ENGR00216076-1: PM: Add Power Management driver for VybridAlison Wang
System could run into STOP and LPRun modes. When system was working in STOP mode, pressing SW1 button or inserting or removing SD card could wake up it. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00216078-2: switch: add L2 switch driver for Vybrid3.0-mvf-201210121659Jason Jin
Port the L2 switch driver from CF platform for Vybridi plaform. This driver usually should work together with the RSTP demo applications provided by fsl. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-17ENGR00216078-1: switch: add platform support for L2 switchJason Jin
Add platform support for Vybrid L2 switch driver. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-10-17ENGR00181358-3: fec: add second FEC support for VybridAlison Wang
Add second FEC support for Vybrid. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00212250-2: watchdog: Add watchdog driver support for VybridAlison Wang
Add watchdog driver support for Vybrid. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-10-17ENGR00212250-1: watchdog: Add platform support for watchdog driverAlison Wang
Add platform support for watchdog driver. Signed-off-by: Wang Xiaojun <b41435@freescale.com>
2012-10-17ENGR00181395-1: Add UART MISC functions support for FaradayJingchang Lu
Add hardware flow control support, Add transmit DMA support, Add FIFO operation support, Add MSB/LSB on data support, Add 9-bits MARK/SPACE support. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-10-17ENGR00181390-2: qspi: Add Quad SPI driver support for VybridAlison Wang
Add Quad SPI driver support for Vybrid. Signed-off-by: Alison Wang <b18965@freescale.com> Xiaochun Li <b41219@freescale.com>
2012-10-17ENGR00181390-1: qspi: Add platform support for Quad SPI driverAlison Wang
Add platform support for Quad SPI driver. Signed-off-by: Alison Wang <b18965@freescale.com> Xiaochun Li <b41219@freescale.com>
2012-10-17ENGR00181407-3: Add Compaq touch screen interface for nano-xAlison Wang
Add Compaq touch screen interface for nano-x. Nano-x work with touch screen driver via Compaq touch screen event format, this patch could add the support above mouse device. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00181407-2: ts: add touch screen driver support for VybirdAlison Wang
Add touch screen driver support for Vybird. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00181407-1: ts: add platform support for touch screen driverAlison Wang
Add platform support for touch screen driver. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-10-17ENGR00180953-2: dspi: update dspi driver support for VybridAlison Wang
Update dspi driver support for Vybrid after debugging on board. Signed-off-by: Jason Jin <jason.jin@freescale.com> Alison Wang <b18965@freescale.com>
2012-10-17ENGR00180953-1: dspi: update platform support for dspi driverAlison Wang
Update platform support for dspi driver after debugging on board. Signed-off-by: Jason Jin <jason.jin@freescale.com> Alison Wang <b18965@freescale.com>
2012-10-17ENGR00180956-3: Add PWM LED device support on MVF600Jingchang Lu
Four LEDS are connected to FTM0 ch0~3 on TWR-MVF600 board, the PWM signal can use control these LEDS on/off or demo. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-10-17ENGR00180956-2: Add FlexTimer PWM support on FaradayAlison Wang
The FlexTimer work on PWM mode with EPWM and CPWM supported. The API configures each FTM channels the same due to pwm subsystem interface restriction. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-10-17ENGR00180956-1: Add FlexTimer PWM device clock for FaradayJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00220352: Fix reboot hung after set uart baudrate3.0-mvf-201208141602Jingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12Enable the FEC as modulesJason Jin
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00212262-3: Faraday:Enable the ADMA2 function for SDHCJason Jin
This patch enable the ADMA2 function for the SDHC module used on Faraday board. Please note that the ADMA address should be 16 bytes aligned other than 4 byte in the spec. This patch also increased the SDHC module frequency to 200MHz. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00219771: Fix high-speed usb hub connection detection failure for FaradayJingchang Lu
Only disable the high-speed device disconnection detction for level-1 device, or the connection detecting would fail. Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00219354: Fix USB host driver compiled as module fail problemJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00219461:Fix high resolution timer support FaradayJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR00219787:Fix UART baud rate and console setting for MVF platformJingchang Lu
Signed-off-by: Jingchang Lu <b35083@freescale.com>
2012-09-12ENGR219758:There is CRC error when JFFS2 used as filesystemJason Jin
Enable the softecc in the config to make the NFC use softecc. also include the defconfig update for: ENGR220009:The LCD panel goes blank after a long time Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00220009: dcu: Add the option to enable or disable blanking supportAlison Wang
If framebuffer console support is enabled, blanking the screen will occur after a long time. To avoid it, the option for disabling blanking is added. Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00219495: dcu: Fix module reinsert error for DCU driverAlison Wang
Signed-off-by: Alison Wang <b18965@freescale.com>
2012-09-12ENGR00219342: edma: Updated edma driver and edma test driverXiaochun Li
This patch is to update Edma driver after debugging on board. mainly, fixed the bug that resulting the request source of DMA1 overflow Signed-off-by: Xiaochun Li <b41219@freescale.com>
2012-09-12ENGR219460:There is call trace when the SD card removed and then pluged-intoJason Jin
The call trace introduced by the card interrupt. This patch try to fix this by disabling the card interrupt. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00219629 Farday:There is call trace for FEC pll clock sometimes.Jason Jin
This patch increase the delay time for the pll clock to lock. otherwise the kernel will panic for the locking failure. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00219616 One Micro-SD card remove will generate a lot of interruptsJason Jin
The PKE and PUE should be declared for the GPIO pull up, otherwise the pin will not be pulled up for the SDHC card detect input. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00180931-4 mvf: add default kernel config for FaradayAlison Wang
Add default kernel config for Faraday. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
2012-09-12ENGR00180936-3: add the module for test eDMA driverXiaochun Li
This patch is to tests eDMA driver. a simple memory to memory transfer with a 32 bit source and destination transfer size that generates an interrupt when the transfer is complete. Signed-off-by: Xiaochun Li <b41219@freescale.com>
2012-09-12ENGR00181396-2: high-speed USB device disconnection managementJingchang Lu
Detection of high-speed USB device disconnection should be enable on connection and disable on disconnection. Signed-off-by: Jingchang Lu <b35083@freescale.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-25 10:43:24 +0000