summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-04-02input: touchscreen: stmpe-ts: android orientation hackApalis_iMX6_LinuxImageV2.2Beta1_20140404Marcel Ziswiler
Rotate touch for now due to missing resistive touch calibration integration. This makes our 7 inch EDT ET070080DH6 panel usable.
2014-04-02input: stmpe-ts: fix touch release detectionMarcel Ziswiler
Previous HZ / 50 calculation allowed for a touch sampling time of 20 ms which is not sufficient if either the touch detect delay or the settling time is longer than 500 us.
2014-04-02input: stmpe-ts: add BTN_TOUCH eventsMarcel Ziswiler
Add BTN_TOUCH event reporting to stmpe-ts touchscreen driver. This will make this touchscreen driver behave consistently wrt. BTN_TOUCH. cd2d64b1a0a12283d63c9d853d5b1403d5cd6c9d 65db86ac07e2f7f91a552490c0be6a99aab8e4a8
2014-04-02board-apalis_imx6: add pm_power_off callbackMax Krummenacher
function taken from board-mx6q_sabresd.c
2014-04-02board-apalis_imx6: cleanup mmc platform dataMax Krummenacher
2014-04-02mach-types: add correct machine type for Apalis iMX6Max Krummenacher
2014-03-17igb: Add Support for new i210/i211 devices.Carolyn Wyborny
This patch adds new initialization functions and device support for i210 and i211 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-17igb: Add function and pointers for 82580 low power state settings.Carolyn Wyborny
82580 and later parts did not have low power setting functions. This patch adds the specific functions, pointers and assignments for these low power settings. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-13apalis-imx6: change sgtl5000 platform dataMax Krummenacher
- sgtl5000 is on I2C bus 1 - correct used voltages for vddd and vdda
2014-03-12board-apalis_imx6: add spidev platform dataMax Krummenacher
2014-03-12board-apalis_imx6: enable USB RNDISMax Krummenacher
2014-03-12board-apalis_imx6: add CANMax Krummenacher
2014-02-17board-imx6: fix missing #if and remove unused codeMax Krummenacher
2014-02-14i2c-ddc: use i2c-gpio to workaround pinmuxingMax Krummenacher
- not (yet) working hdmi-phy i2c would require i2c1 to be muxed between power i2c and ddc.
2014-02-14board: apalis-imx6: add PCIe reset outMax Krummenacher
2014-02-13apalis_t30: enable STMPE ADC driverMax Krummenacher
Make use of the new STMPE ADC driver to expose the four free ADC channels on the STMPE811 to userspace.
2014-02-13iio: adc: STMPE ADC driver backport init/exit macroMax Krummenacher
replace the nonexisting module_platform_driver() - Helper macro with its functionality. Macro was introduced after 3.0 kernels.
2014-02-13iio: adc: add STMPE ADC driver using IIO frameworkStefan Agner
This adds an ADC driver for the STMPE device using the industrial input/output interface. The driver supports raw reading of values. The driver depends on the MFD stmpe driver. If the touchscreen block is enabled too, only for of the 8 ADC channels are available.
2014-02-13mfd: stmpe: add ADC block resourcesStefan Agner
In order to use the auxiliar ADC inputs of STMPE811 devices we need to add resources for the ADC block. Also move the ADC macros from the touchscreen driver to the general header file. We will need them for the ADC driver in future.
2014-02-12board: Add all pins, export GPIOxMax Krummenacher
- add a pinmux setting for all remaining CPU pins - export APALIS GPIO1 .. GPIO8 - while at it remove a chatty debug printk
2014-02-12board: additional fb settingsMax Krummenacher
With the following vidargs HDMI & LVDS run in fullHD: setenv vidargs video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 video=mxcfb1:dev=ldb,LDB-LG-LP156WF1,if=RGB666,ldb=spl1 video=mxcfb2:off video=mxcfb3:off fbmem=32M With the following vidargs parallel RGB is 800x480 EDT 7" setenv vidargs video=mxcfb0:dev=lcd,EDT-WVGA,if=RGB24 video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off fbmem=32M
2014-02-11lcd: Add WVGA timings for the EDT 7.0" panelMax Krummenacher
2014-02-11ldb: Add LVDS timings for the LG LP156WF1 panelMax Krummenacher
2014-02-10board Apalis iMX6: add most pinmuxing with platform dataMax Krummenacher
Register eMMC as the first mmc driver, so it gets always mmcblk0 Fixed mmc speed dependent pin setting to use the correct controller to pins assignment Use the speed dependent pin setting also for initial pinmuxing Added all pinmuxing Added touch driver platform data from Apalis T30 Initalize USB Host, so the ports get VBUS powered HDMI I2C not yet working, so switch pinmuxing to use I2C2 Register eMMC as the first mmc driver, so it gets always mmcblk0 Fixed mmc speed dependent pin setting to use the correct controller to pins assignment Use the speed dependent pin setting also for initial pinmuxing Added all pinmuxing Added touch driver platform data from Apalis T30 Initalize USB Host, so the ports get VBUS powered HDMI I2C not yet working, so switch pinmuxing to use I2C2
2014-02-10board iMX6: remove unused uncommented stuffMax Krummenacher
2014-02-10apalis_imx6: video dac oe polarity hackMax Krummenacher
Apply the hack only if on IPU#1 DI0
2014-02-07defconfig: increase the size of the log bufferMax Krummenacher
2014-01-27defconfig: further bringupMax Krummenacher
- additional errata - audio & touch - remove some modules which do not compile - vivante drm as part of kernel
2014-01-27pinmuxing: VGA on second IPUMax Krummenacher
2014-01-27sd-card: bringup external SDMax Krummenacher
2014-01-26apalis_imx6: video dac oe polarity hackMarcel Ziswiler
The home-brew resistor video DAC on Apalis iMX6 uses DI0_PIN15 as output enable but with reversed polarity. 720p as well as 1080p also work albeit the later some 20 odd pixels shifted towards the top.
2014-01-26nitrogen6x: revert initial apalis_imx6 related changesMarcel Ziswiler
Revert initial Apalis iMX6 bring-up related changes from the following commit now that we have our own proper board file: 36e319203f8fc14a9747616c6d4a2a737252e3b4
2014-01-25apalis_imx6: introduce proper board fileMarcel Ziswiler
Introduce proper board file with accompanying machine ID. For now just re-cycle the actual number from Boundary's Nitrogen resp. Freescale's Sabre. While at it clean out some more irrelevant stuff and add some default NFS boot arguments aka kernel command line.
2014-01-22Apalis iMX6: further bringupMax Krummenacher
- Pinmuxing
2014-01-16gc_hal_kernel*: fixed warnings treated as errorsMax Krummenacher
2014-01-10colibri_imx6_defconfig: merge options form colibi_txxMax Krummenacher
2014-01-10colibri_imx6_defconfig: add defconfigMax Krummenacher
based on meta-fsl-extra nitrogen6x defconfig systemd required options added
2014-01-07AR1020-i2c: Add calibration parameterEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-04sp defconfig: Put back V4L2 output (oddly connected to video capture drivers)Eric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-04sp defconfig: Add USB Mass Storage gadget for use with usbwriteEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-03sp: Add PCIe supportEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-03sp defconfig: fix USB OTG supportEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-02sp: Update with proper peripheralsEric Nelson
2014-01-02sp: add poweroff() routineEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-02sp: export GPIO outputsEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-02sp: More GPIO cleanup, button assignmentsEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-02sp: clean up GPIOs, PWM3Eric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-02sp: clean up comments about I2C assignmentsEric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-02sp: Add PWM buzzer on PWM1 (SD3_DAT3)Eric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
2014-01-02sp: Add eMMC on USDHC4Eric Nelson
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>