summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-20TTY: do not reset master's packet modeJiri Slaby
commit b81273a132177edd806476b953f6afeb17b786d5 upstream. Now that login from util-linux is forced to drop all references to a TTY which it wants to hangup (to reach reference count 1) we are seeing issues with telnet. When login closes its last reference to the slave PTY, it also resets packet mode on the *master* side. And we have a race here. What telnet does is fork+exec of `login'. Then there are two scenarios: * `login' closes the slave TTY and resets thus master's packet mode, but even now telnet properly sets the mode, or * `telnetd' sets packet mode on the master, `login' closes the slave TTY and resets master's packet mode. The former case is OK. However the latter happens in much more cases, by the order of magnitude to be precise. So when one tries to login to such a messed telnet setup, they see the following: inux login: ogin incorrect Note the missing first letters -- telnet thinks it is still in the packet mode, so when it receives "linux login" from `login', it considers "l" as the type of the packet and strips it. SuS does not mention how the implementation should behave. Both BSDs I checked (Free and Net) do not reset the flag upon the last close. By this I am resurrecting an old bug, see References. We are hitting it regularly now, i.e. with updated util-linux, ergo login. Here, I am changing a behavior introduced back in 2.1 times. It would better have a long time testing before goes upstream. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Bryan Mason <bmason@redhat.com> References: https://lkml.org/lkml/2009/11/11/223 References: https://bugzilla.redhat.com/show_bug.cgi?id=504703 References: https://bugzilla.novell.com/show_bug.cgi?id=797042 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20TTY: disable debugging warningJiri Slaby
commit 34dcfb8479ab3c3669561eb9279284cb0eda2572 upstream. We added a warning to flush_to_ldisc to report cases when it is called with a NULL tty. It was for debugging purposes and it lead to a patchset from Peter Hurley. The patchset however did not make it to 3.9, so disable the warning now to not disturb people. We can re-add it when the series is in and we are hunting for another bugs. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20tty/serial: Add support for Altera serial portLey Foon Tan
commit e06c93cacb82dd147266fd1bdb2d0a0bd45ff2c1 upstream. Add support for Altera 8250/16550 compatible serial port. Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20tty: serial: fix typo "SERIAL_S3C2412"Paul Bolle
commit c51d41a1dd8f23a06a4ed651ebb9617de7f59368 upstream. The Kconfig symbol SERIAL_S3C2412 got removed in commit da121506eb03ee5daea55404709110b798bd61d9 ("serial: samsung: merge probe() function from all SoC specific extensions"). But it also added a last reference to that symbol. The commit and the tree make clear that CPU_S3C2412 should have been used instead. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20tty: serial: fix typo "ARCH_S5P6450"Paul Bolle
commit 827aa0d36d486f359808c8fb931cf7a71011a09d upstream. This could have been either ARCH_S5P64X0 or CPU_S5P6450. Looking at commit 2555e663b367b8d555e76023f4de3f6338c28d6c ("ARM: S5P64X0: Add UART serial support for S5P6450") - which added this typo - makes clear this should be CPU_S5P6450. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 ↵Wang YanQing
Multi-I/O Controller commit 8d2f8cd424ca0b99001f3ff4f5db87c4e525f366 upstream. 01:08.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) Subsystem: Device [1000:0012] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at e050 [size=8] Region 1: I/O ports at e040 [size=8] Region 2: I/O ports at e030 [size=8] Region 3: I/O ports at e020 [size=8] Region 4: I/O ports at e010 [size=8] Region 5: I/O ports at e000 [size=16] Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20serial: 8250: Keep 8250.<xxxx> module options functional after driver renameJosh Boyer
commit f2b8dfd9e480c3db3bad0c25c590a5d11b31f4ef upstream. With commit 835d844d1 (8250_pnp: do pnp probe before legacy probe), the 8250 driver was renamed to 8250_core. This means any existing usage of the 8259.<xxxx> module parameters or as a kernel command line switch is now broken, as the 8250_core driver doesn't parse options belonging to something called "8250". To solve this, we redefine the module options in a dummy function using a redefined MODULE_PARAM_PREFX when built into the kernel. In the case where we're building as a module, we provide an alias to the old 8250 name. The dummy function prevents compiler errors due to global variable redefinitions that happen as part of the module_param_ macro expansions. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20tty/8250_pnp: serial port detection regression since v3.7Sean Young
commit 77e372a3d82e5e4878ce1962207edd766773cc76 upstream. The InsydeH2O BIOS (version dated 09/12/2011) has the following in its pnp resouces for its serial ports: $ cat /sys/bus/pnp/devices/00:0b/resources state = active io disabled irq disabled We do not check if the resources are disabled, and create a bogus ttyS* device. Since commit 835d844d1a28e (8250_pnp: do pnp probe before legacy probe) we get a bogus ttyS0, which prevents the legacy probe from detecting it. Note, the BIOS can also be upgraded, fixing this problem, but for people who can't do that, this fix is needed. Reported-by: Vincent Deffontaines <vincent@gryzor.com> Tested-by: Vincent Deffontaines <vincent@gryzor.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20ext3: Fix format string issuesLars-Peter Clausen
commit 8d0c2d10dd72c5292eda7a06231056a4c972e4cc upstream. ext3_msg() takes the printk prefix as the second parameter and the format string as the third parameter. Two callers of ext3_msg omit the prefix and pass the format string as the second parameter and the first parameter to the format string as the third parameter. In both cases this string comes from an arbitrary source. Which means the string may contain format string characters, which will lead to undefined and potentially harmful behavior. The issue was introduced in commit 4cf46b67eb("ext3: Unify log messages in ext3") and is fixed by this patch. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20signal: always clear sa_restorer on execveKees Cook
commit 2ca39528c01a933f6689cd6505ce65bd6d68a530 upstream. When the new signal handlers are set up, the location of sa_restorer is not cleared, leaking a parent process's address space location to children. This allows for a potential bypass of the parent's ASLR by examining the sa_restorer value returned when calling sigaction(). Based on what should be considered "secret" about addresses, it only matters across the exec not the fork (since the VMAs haven't changed until the exec). But since exec sets SIG_DFL and keeps sa_restorer, this is where it should be fixed. Given the few uses of sa_restorer, a "set" function was not written since this would be the only use. Instead, we use __ARCH_HAS_SA_RESTORER, as already done in other places. Example of the leak before applying this patch: $ cat /proc/$$/maps ... 7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... $ ./leak ... 7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so ... 1 0 (nil) 0x7fb9f30b94a0 2 4000000 (nil) 0x7f278bcaa4a0 3 4000000 (nil) 0x7f278bcaa4a0 4 0 (nil) 0x7fb9f30b94a0 ... [akpm@linux-foundation.org: use SA_RESTORER for backportability] Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Emese Revfy <re.emese@gmail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20qcserial: bind to DM/DIAG port on Gobi 1K devicesDan Williams
commit 3f8bc5e4da29c7e05edeca6b475abb4fb01a5a13 upstream. Turns out we just need altsetting 1 and then we can talk to it. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20staging: comedi: dt9812: use CR_CHAN() for channel numberIan Abbott
commit 564c526a1bed5e42b5cd52cfe1752c4296ef17a6 upstream. As pointed out by Dan Carpenper in <http://driverdev.linuxdriverproject.org/pipermail/devel/2013-February/036025.html>, the dt9812 comedi driver's use of the `chanspec` member of `struct comedi_insn` as a channel number is incorrect. Change it to use `CR_CHAN(insn->chanspec)` as the channel number (where `insn` is a pointer to the `struct comedi_insn` being processed). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Anders Blomdell <anders.blomdell@control.lth.se> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20staging: vt6656: Fix oops on resume from suspend.Malcolm Priestley
commit 6987a6dabfc40222ef767f67b57212fe3a0225fb upstream. Remove usb_put_dev from vt6656_suspend and usb_get_dev from vt6566_resume. These are not normally in suspend/resume functions. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: EHCI: don't check DMA values in QH overlaysAlan Stern
commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream. This patch (as1661) fixes a rather obscure bug in ehci-hcd. In a couple of places, the driver compares the DMA address stored in a QH's overlay region with the address of a particular qTD, in order to see whether that qTD is the one currently being processed by the hardware. (If it is then the status in the QH's overlay region is more up-to-date than the status in the qTD, and if it isn't then the overlay's value needs to be adjusted when the QH is added back to the active schedule.) However, DMA address in the overlay region isn't always valid. It sometimes will contain a stale value, which may happen by coincidence to be equal to a qTD's DMA address. Instead of checking the DMA address, we should check whether the overlay region is active and valid. The patch tests the ACTIVE bit in the overlay, and clears this bit when the overlay becomes invalid (which happens when the currently-executing URB is unlinked). This is the second part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Reported-and-tested-by: Stephen Thirlwall <sdt@dr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: storage: fix Huawei mode switching regressionBjørn Mork
commit ab4b71644a26d1ab92b987b2fd30e17c25e89f85 upstream. This reverts commit 200e0d99 ("USB: storage: optimize to match the Huawei USB storage devices and support new switch command" and the followup bugfix commit cd060956 ("USB: storage: properly handle the endian issues of idProduct"). The commit effectively added a large number of Huawei devices to the deprecated usb-storage mode switching logic. Many of these devices have been in use and supported by the userspace usb_modeswitch utility for years. Forcing the switching inside the kernel causes a number of regressions as a result of ignoring existing onfigurations, and also completely takes away the ability to configure mode switching per device/system/user. Known regressions caused by this: - Some of the devices support multiple modes, using different switching commands. There are existing configurations taking advantage of this. - There is a real use case for disabling mode switching and instead mounting the exposed storage device. This becomes impossible with switching logic inside the usb-storage driver. - At least on device fail as a result of the usb-storage switching command, becoming completely unswitchable. This is possibly a firmware bug, but still a regression because the device work as expected using usb_modeswitch defaults. In-kernel mode switching was deprecated years ago with the development of the more user friendly userspace alternatives. The existing list of devices in usb-storage was only kept to prevent breaking already working systems. The long term plan is to remove the list, not to add to it. Ref: http://permalink.gmane.org/gmane.linux.usb.general/28543 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: <fangxiaozhi@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20usb: serial: Add Rigblaster Advantage to device tableSteve Conklin
commit a57e82a18779ab8a5e5a1f5841cef937cf578913 upstream. The Rigblaster Advantage is an amateur radio interface sold by West Mountain Radio. It contains a cp210x serial interface but the device ID is not in the driver. Signed-off-by: Steve Conklin <sconklin@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: added support for Cinterion's products AH6 and PLS8Christian Schmiedl
commit 1941138e1c024ecb5bd797d414928d3eb94d8662 upstream. add support for Cinterion's products AH6 and PLS8 by adding Product IDs and USB_DEVICE tuples. Signed-off-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20usb: cp210x new Vendor/Device IDsMatwey V. Kornilov
commit be3101c23394af59694c8a2aae6d07f5da62fea5 upstream. This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20usb: dwc3: core: don't forget to free coherent memoryFelipe Balbi
commit d9b4330adec006c2e8907bdcacd9dcc0e8874d18 upstream. commit 3921426 (usb: dwc3: core: move event buffer allocation out of dwc3_core_init()) introduced a memory leak of the coherent memory we use as event buffers on dwc3 driver. If the driver is compiled as a dynamically loadable module and use constantly loads and unloads the driver, we will continue to leak the coherent memory allocated during ->probe() because dwc3_free_event_buffers() is never called during ->remove(). Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20tools: usb: ffs-test: Fix build failureMaxin B. John
commit a0f11aceee531d444f58b939e6a537ee5e2b9cc5 upstream. Fixes this build failure: gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c gcc -Wall -Wextra -g -lpthread -I../include -o ffs-test ffs-test.c In file included from ffs-test.c:41:0: ../../include/linux/usb/functionfs.h:4:39: fatal error: uapi/linux/usb/functionfs.h: No such file or directory compilation terminated. make: *** [ffs-test] Error 1 Signed-off-by: Maxin B. John <maxin.john@enea.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: cdc-wdm: fix buffer overflowOliver Neukum
commit c0f5ecee4e741667b2493c742b60b6218d40b3aa upstream. The buffer for responses must not overflow. If this would happen, set a flag, drop the data and return an error after user space has read all remaining data. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20USB: option: add Huawei E5331Bjørn Mork
commit daec90e7382cbd0e73eb6861109b3da91e5ab1f3 upstream. Another device using CDC ACM with vendor specific protocol to mark serial functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20virtio: rng: disallow multiple device registrations, fixes crashesAmit Shah
commit e84e7a56a3aa2963db506299e29a5f3f09377f9b upstream. The code currently only supports one virtio-rng device at a time. Invoking guests with multiple devices causes the guest to blow up. Check if we've already registered and initialised the driver. Also cleanup in case of registration errors or hot-unplug so that a new device can be used. Reported-by: Peter Krempa <pkrempa@redhat.com> Reported-by: <yunzheng@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20xen/pciback: Don't disable a PCI device that is already disabled.Konrad Rzeszutek Wilk
commit bdc5c1812cea6efe1aaefb3131fcba28cd0b2b68 upstream. While shuting down a HVM guest with pci devices passed through we get this: pciback 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100002) ------------[ cut here ]------------ WARNING: at drivers/pci/pci.c:1397 pci_disable_device+0x88/0xa0() Hardware name: MS-7640 Device pciback disabling already-disabled device Modules linked in: Pid: 53, comm: xenwatch Not tainted 3.9.0-rc1-20130304a+ #1 Call Trace: [<ffffffff8106994a>] warn_slowpath_common+0x7a/0xc0 [<ffffffff81069a31>] warn_slowpath_fmt+0x41/0x50 [<ffffffff813cf288>] pci_disable_device+0x88/0xa0 [<ffffffff814554a7>] xen_pcibk_reset_device+0x37/0xd0 [<ffffffff81454b6f>] ? pcistub_put_pci_dev+0x6f/0x120 [<ffffffff81454b8d>] pcistub_put_pci_dev+0x8d/0x120 [<ffffffff814582a9>] __xen_pcibk_release_devices+0x59/0xa0 This fixes the bug. Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-20qcaux: add Franklin U600Dan Williams
commit 2d90e63603ac235aecd7d20e234616e0682c8b1f upstream. 4 ports; AT/PPP is standard CDC-ACM. The other three (added by this patch) are QCDM/DIAG, possibly GPS, and unknown. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14Linux 3.8.3v3.8.3Greg Kroah-Hartman
2013-03-146lowpan: Remove __init tag from lowpan_netlink_fini().David S. Miller
commit a07fdceccf9d9f1b87f781e9a87662182e590d70 upstream. It's called from both __init and __exit code, so neither tag is appropriate. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14userns: Don't allow CLONE_NEWUSER | CLONE_FSEric W. Biederman
commit e66eded8309ebf679d3d3c1f5820d1f2ca332c71 upstream. Don't allowing sharing the root directory with processes in a different user namespace. There doesn't seem to be any point, and to allow it would require the overhead of putting a user namespace reference in fs_struct (for permission checks) and incrementing that reference count on practically every call to fork. So just perform the inexpensive test of forbidding sharing fs_struct acrosss processes in different user namespaces. We already disallow other forms of threading when unsharing a user namespace so this should be no real burden in practice. This updates setns, clone, and unshare to disallow multiple user namespaces sharing an fs_struct. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14w1-gpio: fix section mismatchHauke Mehrtens
commit 06a8f1feb9e82e5b66f781ba3e39055e3f89a641 upstream. This fixes the following section mismatch: WARNING: drivers/w1/masters/w1-gpio.o(.data+0x188): Section mismatch in reference from the variable w1_gpio_driver to the function .init.text:w1_gpio_probe() The variable w1_gpio_driver references the function __init w1_gpio_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14Revert "xen/blkback: Don't trust the handle from the frontend."Greg Kroah-Hartman
This reverts commit 01c681d4c70d64cb72142a2823f27c4146a02e63 upstream (ef56ca64ea733c3b88f0bb74b04da128b1dc35d8 in this tree), as it wasn't supposed to have been applied to the stable tree. Cc: Jan Beulich <jbeulich@suse.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14USB: Fix connected device switch to Inactive state.Sarah Sharp
[This is upstream commit d3b9d7a9051d7024a93c76a84b2f84b3b66ad6d5. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 65bdac5effd15d6af619b3b7218627ef4d84ed6a "USB: Handle warm reset failure on empty port."] A USB 3.0 device can transition to the Inactive state if a U1 or U2 exit transition fails. The current code in hub_events simply issues a warm reset, but does not call any pre-reset or post-reset driver methods (or unbind/rebind drivers without them). Therefore the drivers won't know their device has just been reset. hub_events should instead call usb_reset_device. This means hub_port_reset now needs to figure out whether it should issue a warm reset or a hot reset. Remove the FIXME note about needing disconnect() for a NOTATTACHED device. This patch fixes that. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14USB: Rip out recursive call on warm port reset.Sarah Sharp
[This is upstream commit a24a6078754f28528bc91e7e7b3e6ae86bd936d8. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 65bdac5effd15d6af619b3b7218627ef4d84ed6a "USB: Handle warm reset failure on empty port."] When a hot reset fails on a USB 3.0 port, the current port reset code recursively calls hub_port_reset inside hub_port_wait_reset. This isn't ideal, since we should avoid recursive calls in the kernel, and it also doesn't allow us to issue multiple warm resets on reset failures. Rip out the recursive call. Instead, add code to hub_port_reset to issue a warm reset if the hot reset fails, and try multiple warm resets before giving up on the port. In hub_port_wait_reset, remove the recursive call and re-indent. The code is basically the same, except: 1. It bails out early if the port has transitioned to Inactive or Compliance Mode after the reset completed. 2. It doesn't consider a connect status change to be a failed reset. If multiple warm resets needed to be issued, the connect status may have changed, so we need to ignore that and look at the port link state instead. hub_port_reset will now do that. 3. It unconditionally sets udev->speed on all types of successful resets. The old recursive code would set the port speed when the second hub_port_reset returned. The old code did not handle connected devices needing a warm reset well. There were only two situations that the old code handled correctly: an empty port needing a warm reset, and a hot reset that migrated to a warm reset. When an empty port needed a warm reset, hub_port_reset was called with the warm variable set. The code in hub_port_finish_reset would skip telling the USB core and the xHC host that the device was reset, because otherwise that would result in a NULL pointer dereference. When a USB 3.0 device reset migrated to a warm reset, the recursive call made the call stack look like this: hub_port_reset(warm = false) hub_wait_port_reset(warm = false) hub_port_reset(warm = true) hub_wait_port_reset(warm = true) hub_port_finish_reset(warm = true) (return up the call stack to the first wait) hub_port_finish_reset(warm = false) The old code didn't want to notify the USB core or the xHC host of device reset twice, so it only did it in the second call to hub_port_finish_reset, when warm was set to false. This was necessary because before patch two ("USB: Ignore xHCI Reset Device status."), the USB core would pay attention to the xHC Reset Device command error status, and the second call would always fail. Now that we no longer have the recursive call, and warm can change from false to true in hub_port_reset, we need to have hub_port_finish_reset unconditionally notify the USB core and the xHC of the device reset. In hub_port_finish_reset, unconditionally clear the connect status change (CSC) bit for USB 3.0 hubs when the port reset is done. If we had to issue multiple warm resets for a device, that bit may have been set if the device went into SS.Inactive and then was successfully warm reset. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14USB: Prepare for refactoring by adding extra udev checks.Sarah Sharp
[This is upstream commit 2d4fa940f99663c82ba55b2244638833b388e4e2. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 65bdac5effd15d6af619b3b7218627ef4d84ed6a "USB: Handle warm reset failure on empty port."] The next patch will refactor the hub port code to rip out the recursive call to hub_port_reset on a failed hot reset. In preparation for that, make sure all code paths can deal with being called with a NULL udev. The usb_device will not be valid if warm reset was issued because a port transitioned to the Inactive or Compliance Mode on a device connect. This patch should have no effect on current behavior. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14USB: Don't use EHCI port sempahore for USB 3.0 hubs.Sarah Sharp
[This is upstream commit 0fe51aa5eee51db7c7ecd201d42a977ad79c58b6. It needs to be backported to kernels as old as 3.2, because it fixes the buggy commit 65bdac5effd15d6af619b3b7218627ef4d84ed6a "USB: Handle warm reset failure on empty port."] The EHCI host controller needs to prevent EHCI initialization when the UHCI or OHCI companion controller is in the middle of a port reset. It uses ehci_cf_port_reset_rwsem to do this. USB 3.0 hubs can't be under an EHCI host controller, so it makes no sense to down the semaphore for USB 3.0 hubs. It also makes the warm port reset code more complex. Don't down ehci_cf_port_reset_rwsem for USB 3.0 hubs. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14efi: be more paranoid about available space when creating variablesMatthew Garrett
commit 68d929862e29a8b52a7f2f2f86a0600423b093cd upstream. UEFI variables are typically stored in flash. For various reasons, avaiable space is typically not reclaimed immediately upon the deletion of a variable - instead, the system will garbage collect during initialisation after a reboot. Some systems appear to handle this garbage collection extremely poorly, failing if more than 50% of the system flash is in use. This can result in the machine refusing to boot. The safest thing to do for the moment is to forbid writes if they'd end up using more than half of the storage space. We can make this more finegrained later if we come up with a method for identifying the broken machines. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14efivars: Disable external interrupt while holding efivars->lockSeiji Aguchi
commit 81fa4e581d9283f7992a0d8c534bb141eb840a14 upstream. [Problem] There is a scenario which efi_pstore fails to log messages in a panic case. - CPUA holds an efi_var->lock in either efivarfs parts or efi_pstore with interrupt enabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA stops with holding the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) but it returns without logging messages. [Patch Description] This patch disables an external interruption while holding efivars->lock as follows. In efi_pstore_write() and get_var_data(), spin_lock/spin_unlock is replaced by spin_lock_irqsave/spin_unlock_irqrestore because they may be called in an interrupt context. In other functions, they are replaced by spin_lock_irq/spin_unlock_irq. because they are all called from a process context. By applying this patch, we can avoid the problem above with a following senario. - CPUA holds an efi_var->lock with interrupt disabled. - CPUB panics and sends IPI to CPUA in smp_send_stop(). - CPUA receives the IPI after releasing the lock because it is disabling interrupt while holding the lock. - CPUB waits for one sec until CPUA releases the lock. - CPUB kicks efi_pstore_write() via kmsg_dump(KSMG_DUMP_PANIC) And it can hold the lock successfully. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ftrace: Update the kconfig for DYNAMIC_FTRACESteven Rostedt
commit db05021d49a994ee40a9735d9c3cb0060c9babb8 upstream. The prompt to enable DYNAMIC_FTRACE (the ability to nop and enable function tracing at run time) had a confusing statement: "enable/disable ftrace tracepoints dynamically" This was written before tracepoints were added to the kernel, but now that tracepoints have been added, this is very confusing and has confused people enough to give wrong information during presentations. Not only that, I looked at the help text, and it still references that dreaded daemon that use to wake up once a second to update the nop locations and brick NICs, that hasn't been around for over five years. Time to bring the text up to the current decade. Reported-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14powerpc: Apply early paca fixups to boot_paca and the boot cpu's pacaMichael Ellerman
commit 25e138149c19fa0680147b825be475f5fd57f155 upstream. In commit 466921c we added a hack to set the paca data_offset to zero so that per-cpu accesses would work on the boot cpu prior to per-cpu areas being setup. This fixed a problem with lockdep touching per-cpu areas very early in boot. However if we combine CONFIG_LOCK_STAT=y with any of the PPC_EARLY_DEBUG options, we can hit the same problem in udbg_early_init(). To avoid that we need to set the data_offset of the boot_paca also. So factor out the fixup logic and call it for both the boot_paca, and "the paca of the boot cpu". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Tested-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: kirkwood: of_serial: fix clock gating by removing clock-frequencyJason Cooper
commit 93fff4ce19f9978cc1c59db42760717477939249 upstream. When DT support for kirkwood was first introduced, there was no clock infrastructure. As a result, we had to manually pass the clock-frequency to the driver from the device node. Unfortunately, on kirkwood, with minimal config or all module configs, clock-frequency breaks booting because of_serial doesn't consume the gate_clk when clock-frequency is defined. The end result on kirkwood is that runit gets gated, and then the boot fails when the kernel tries to write to the serial port. Fix the issue by removing the clock-frequency parameter from all kirkwood dts files. Booted on dreamplug without earlyprintk and successfully logged in via ttyS0. Reported-by: Simon Baatz <gmbnomis@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14ARM: mxs_defconfig: Make USB host functional againFabio Estevam
commit f6c49da98dd6eacb85034d21d16e1428e03e190f upstream. commit 09f6ffde2e (USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver) introduced CONFIG_USB_EHCI_HCD as a dependency for USB_CHIPIDEA_HOST. Select CONFIG_USB_EHCI_HCD, so that USB host can be functional again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14gpio: mvebu: Add clk support to prevent lockupAndrew Lunn
commit de88747f514a4e0cca416a8871de2302f4f77790 upstream. The kirkwood SoC GPIO cores use the runit clock. Add code to clk_prepare_enable() runit, otherwise there is a danger of locking up the SoC by accessing the GPIO registers when runit clock is not ticking. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14rtc: rtc-mv: Add support for clk to avoid lockupsAndrew Lunn
commit 89c58c198b252f2bc20657fdd72a2aea788c435c upstream. The Marvell RTC on Kirkwood makes use of the runit clock. Ensure the driver clk_prepare_enable() this clock, otherwise there is a danger the SoC will lockup when accessing RTC registers with the clock disabled. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14vfs: fix pipe counter breakageAl Viro
commit a930d8790552658140d7d0d2e316af4f0d76a512 upstream. If you open a pipe for neither read nor write, the pipe code will not add any usage counters to the pipe, causing the 'struct pipe_inode_info" to be potentially released early. That doesn't normally matter, since you cannot actually use the pipe, but the pipe release code - particularly fasync handling - still expects the actual pipe infrastructure to all be there. And rather than adding NULL pointer checks, let's just disallow this case, the same way we already do for the named pipe ("fifo") case. This is ancient going back to pre-2.4 days, and until trinity, nobody naver noticed. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and ↵Mathieu Desnoyers
security keys commit 8aec0f5d4137532de14e6554fd5dd201ff3a3c49 upstream. Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to compat_process_vm_rw() shows that the compatibility code requires an explicit "access_ok()" check before calling compat_rw_copy_check_uvector(). The same difference seems to appear when we compare fs/read_write.c:do_readv_writev() to fs/compat.c:compat_do_readv_writev(). This subtle difference between the compat and non-compat requirements should probably be debated, as it seems to be error-prone. In fact, there are two others sites that use this function in the Linux kernel, and they both seem to get it wrong: Now shifting our attention to fs/aio.c, we see that aio_setup_iocb() also ends up calling compat_rw_copy_check_uvector() through aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to be missing. Same situation for security/keys/compat.c:compat_keyctl_instantiate_key_iov(). I propose that we add the access_ok() check directly into compat_rw_copy_check_uvector(), so callers don't have to worry about it, and it therefore makes the compat call code similar to its non-compat counterpart. Place the access_ok() check in the same location where copy_from_user() can trigger a -EFAULT error in the non-compat code, so the ABI behaviors are alike on both compat and non-compat. While we are here, fix compat_do_readv_writev() so it checks for compat_rw_copy_check_uvector() negative return values. And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error handling. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14keys: fix race with concurrent install_user_keyrings()David Howells
commit 0da9dfdd2cd9889201bc6f6f43580c99165cd087 upstream. This fixes CVE-2013-1792. There is a race in install_user_keyrings() that can cause a NULL pointer dereference when called concurrently for the same user if the uid and uid-session keyrings are not yet created. It might be possible for an unprivileged user to trigger this by calling keyctl() from userspace in parallel immediately after logging in. Assume that we have two threads both executing lookup_user_key(), both looking for KEY_SPEC_USER_SESSION_KEYRING. THREAD A THREAD B =============================== =============================== ==>call install_user_keyrings(); if (!cred->user->session_keyring) ==>call install_user_keyrings() ... user->uid_keyring = uid_keyring; if (user->uid_keyring) return 0; <== key = cred->user->session_keyring [== NULL] user->session_keyring = session_keyring; atomic_inc(&key->usage); [oops] At the point thread A dereferences cred->user->session_keyring, thread B hasn't updated user->session_keyring yet, but thread A assumes it is populated because install_user_keyrings() returned ok. The race window is really small but can be exploited if, for example, thread B is interrupted or preempted after initializing uid_keyring, but before doing setting session_keyring. This couldn't be reproduced on a stock kernel. However, after placing systemtap probe on 'user->session_keyring = session_keyring;' that introduced some delay, the kernel could be crashed reliably. Fix this by checking both pointers before deciding whether to return. Alternatively, the test could be done away with entirely as it is checked inside the mutex - but since the mutex is global, that may not be the best way. Signed-off-by: David Howells <dhowells@redhat.com> Reported-by: Mateusz Guzik <mguzik@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14usbnet: smsc95xx: fix suspend failureMing Lei
commit 7643721471117d5f62ca36f328d3dc8d84af4402 upstream. The three below functions: smsc95xx_enter_suspend0() smsc95xx_enter_suspend1() smsc95xx_enter_suspend2() return > 0 in case of success, so they will cause smsc95xx_suspend() to return > 0 and cause suspend failure. The bug is introduced in commit 3b9f7d(smsc95xx: fix error handling in suspend failure case). Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14acer-wmi: avoid the warning of 'devices' may be used uninitializedLee, Chun-Yi
commit f24c96eae58aeea4c36fb064cf3ee9734933f8fc upstream. Fengguang Wu run kernel build test to platform-drivers-x86/linux-next git tree on x86_64 architecture and found a warning that was introduced by 727651bf738b6b917335025d09323d0962eda114 commit: drivers/platform/x86/acer-wmi.c: In function ‘WMID_set_capabilities’: drivers/platform/x86/acer-wmi.c:1211: warning: ‘devices’ may be used uninitialized in this function This patch fixes the above warning message. Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Matthew Garrett <mjg@redhat.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14crypto: user - fix info leaks in report APIMathias Krause
commit 9a5467bf7b6e9e02ec9c3da4e23747c05faeaac6 upstream. Three errors resulting in kernel memory disclosure: 1/ The structures used for the netlink based crypto algorithm report API are located on the stack. As snprintf() does not fill the remainder of the buffer with null bytes, those stack bytes will be disclosed to users of the API. Switch to strncpy() to fix this. 2/ crypto_report_one() does not initialize all field of struct crypto_user_alg. Fix this to fix the heap info leak. 3/ For the module name we should copy only as many bytes as module_name() returns -- not as much as the destination buffer could hold. But the current code does not and therefore copies random data from behind the end of the module name, as the module name is always shorter than CRYPTO_MAX_ALG_NAME. Also switch to use strncpy() to copy the algorithm's name and driver_name. They are strings, after all. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14mfd: rtsx: Fix issue that booting OS with SD card insertedWei WANG
commit c3481955f6c78c8dd99921759306d7469c999ec2 upstream. Realtek card reader supports both SD and MS card. According to the settings of rtsx MFD driver, SD host will be probed before MS host. If we boot/reboot Linux with SD card inserted, the resetting flow of SD card will succeed, and the following resetting flow of MS is sure to fail. Then MS upper-level driver will ask rtsx driver to turn power off. This request leads to the result that the following SD commands fail and SD card can't be accessed again. In this commit, Realtek's SD and MS host driver will check whether the card that upper driver requesting is the one existing in the slot. If not, Realtek's host driver will refuse the operation to make sure the exlusive accessing at the same time. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Cc: Tim Gardner <rtg.canonical@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-14mfd: rtsx: Optimize card detect flowWei WANG
commit 504decc0a063e6a09a1e5b203ca68bc21dfffde9 upstream. 1. Schedule card detect work at the end of the ISR 2. Callback function ops->cd_deglitch may delay for a period of time. It is not proper to call this callback when local irq disabled. 3. Card detect flow can't be executed in parallel with other card reader operations, so it's better to be protected by mutex. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Cc: Tim Gardner <rtg.canonical@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-19 18:22:44 +0000