Age | Commit message (Collapse) | Author |
|
|
|
Some Micrel KSZ8041NL PHY chips exhibit continous RX errors after
using the power down mode bit (0.11). If the PHY is taken out of
power down mode in a certain temperature range, the PHY enters a
weird state which leads to continously reporting RX errors. In that
state, the MAC is not able to receive or send any Ethernet frames
and the activity LED is constantly blinking. Since Linux is using
the suspend callback when the interface is taken down, ending up
in that state can easily happen during a normal startup.
Micrel confirmed the issue, caused by abnormal clock recovery when
using power down mode. Even the latest revision (A4, Revision ID
0x1513) seems to suffer that problem.
Remove the suspend/resume callback to avoid using the power down
mode completely.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit a76182f34d2963ee5dca3bc026cbddb44b19be7c)
|
|
Deferred probes shouldn't cause error messages in the boot log. Avoid
printing with dev_err() in case EPROBE_DEFER is the return value.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
The dma_required_mask might overestimate the memory size, or might not match
up with the CMA area placement for other reasons. Get the information about
CMA area placement directly from CMA where it is available, but keep the
dma_required_mask as an approximate fallback for architectures where CMA is
not available.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
Make them usable in modules. Some drivers want to know where their
device CMA area is located to make better decisions about the DMA
programming.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
|
|
This is the 5.2.7 stable release
|
|
|
|
commit 4c92057661a3412f547ede95715641d7ee16ddac upstream
Add documentation to the Spectre document about the new swapgs variant of
Spectre v1.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f36cf386e3fec258a341d446915862eded3e13d8 upstream
Intel provided the following information:
On all current Atom processors, instructions that use a segment register
value (e.g. a load or store) will not speculatively execute before the
last writer of that segment retires. Thus they will not use a
speculatively written segment value.
That means on ATOMs there is no speculation through SWAPGS, so the SWAPGS
entry paths can be excluded from the extra LFENCE if PTI is disabled.
Create a separate bug flag for the through SWAPGS speculation and mark all
out-of-order ATOMs and AMD/HYGON CPUs as not affected. The in-order ATOMs
are excluded from the whole mitigation mess anyway.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 64dbc122b20f75183d8822618c24f85144a5a94d upstream
Somehow the swapgs mitigation entry code patch ended up with a JMPQ
instruction instead of JMP, where only the short jump is needed. Some
assembler versions apparently fail to optimize JMPQ into a two-byte JMP
when possible, instead always using a 7-byte JMP with relocation. For
some reason that makes the entry code explode with a #GP during boot.
Change it back to "JMP" as originally intended.
Fixes: 18ec54fdd6d1 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2059825986a1c8143fd6698774fa9d83733bb11 upstream
The previous commit added macro calls in the entry code which mitigate the
Spectre v1 swapgs issue if the X86_FEATURE_FENCE_SWAPGS_* features are
enabled. Enable those features where applicable.
The mitigations may be disabled with "nospectre_v1" or "mitigations=off".
There are different features which can affect the risk of attack:
- When FSGSBASE is enabled, unprivileged users are able to place any
value in GS, using the wrgsbase instruction. This means they can
write a GS value which points to any value in kernel space, which can
be useful with the following gadget in an interrupt/exception/NMI
handler:
if (coming from user space)
swapgs
mov %gs:<percpu_offset>, %reg1
// dependent load or store based on the value of %reg
// for example: mov %(reg1), %reg2
If an interrupt is coming from user space, and the entry code
speculatively skips the swapgs (due to user branch mistraining), it
may speculatively execute the GS-based load and a subsequent dependent
load or store, exposing the kernel data to an L1 side channel leak.
Note that, on Intel, a similar attack exists in the above gadget when
coming from kernel space, if the swapgs gets speculatively executed to
switch back to the user GS. On AMD, this variant isn't possible
because swapgs is serializing with respect to future GS-based
accesses.
NOTE: The FSGSBASE patch set hasn't been merged yet, so the above case
doesn't exist quite yet.
- When FSGSBASE is disabled, the issue is mitigated somewhat because
unprivileged users must use prctl(ARCH_SET_GS) to set GS, which
restricts GS values to user space addresses only. That means the
gadget would need an additional step, since the target kernel address
needs to be read from user space first. Something like:
if (coming from user space)
swapgs
mov %gs:<percpu_offset>, %reg1
mov (%reg1), %reg2
// dependent load or store based on the value of %reg2
// for example: mov %(reg2), %reg3
It's difficult to audit for this gadget in all the handlers, so while
there are no known instances of it, it's entirely possible that it
exists somewhere (or could be introduced in the future). Without
tooling to analyze all such code paths, consider it vulnerable.
Effects of SMAP on the !FSGSBASE case:
- If SMAP is enabled, and the CPU reports RDCL_NO (i.e., not
susceptible to Meltdown), the kernel is prevented from speculatively
reading user space memory, even L1 cached values. This effectively
disables the !FSGSBASE attack vector.
- If SMAP is enabled, but the CPU *is* susceptible to Meltdown, SMAP
still prevents the kernel from speculatively reading user space
memory. But it does *not* prevent the kernel from reading the
user value from L1, if it has already been cached. This is probably
only a small hurdle for an attacker to overcome.
Thanks to Dave Hansen for contributing the speculative_smap() function.
Thanks to Andrew Cooper for providing the inside scoop on whether swapgs
is serializing on AMD.
[ tglx: Fixed the USER fence decision and polished the comment as suggested
by Dave Hansen ]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 18ec54fdd6d18d92025af097cd042a75cf0ea24c upstream
Spectre v1 isn't only about array bounds checks. It can affect any
conditional checks. The kernel entry code interrupt, exception, and NMI
handlers all have conditional swapgs checks. Those may be problematic in
the context of Spectre v1, as kernel code can speculatively run with a user
GS.
For example:
if (coming from user space)
swapgs
mov %gs:<percpu_offset>, %reg
mov (%reg), %reg1
When coming from user space, the CPU can speculatively skip the swapgs, and
then do a speculative percpu load using the user GS value. So the user can
speculatively force a read of any kernel value. If a gadget exists which
uses the percpu value as an address in another load/store, then the
contents of the kernel value may become visible via an L1 side channel
attack.
A similar attack exists when coming from kernel space. The CPU can
speculatively do the swapgs, causing the user GS to get used for the rest
of the speculative window.
The mitigation is similar to a traditional Spectre v1 mitigation, except:
a) index masking isn't possible; because the index (percpu offset)
isn't user-controlled; and
b) an lfence is needed in both the "from user" swapgs path and the
"from kernel" non-swapgs path (because of the two attacks described
above).
The user entry swapgs paths already have SWITCH_TO_KERNEL_CR3, which has a
CR3 write when PTI is enabled. Since CR3 writes are serializing, the
lfences can be skipped in those cases.
On the other hand, the kernel entry swapgs paths don't depend on PTI.
To avoid unnecessary lfences for the user entry case, create two separate
features for alternative patching:
X86_FEATURE_FENCE_SWAPGS_USER
X86_FEATURE_FENCE_SWAPGS_KERNEL
Use these features in entry code to patch in lfences where needed.
The features aren't enabled yet, so there's no functional change.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit acec0ce081de0c36459eea91647faf99296445a3 upstream
It's a waste for the four X86_FEATURE_CQM_* feature bits to occupy two
whole feature bits words. To better utilize feature words, re-define
word 11 to host scattered features and move the four X86_FEATURE_CQM_*
features into Linux defined word 11. More scattered features can be
added in word 11 in the future.
Rename leaf 11 in cpuid_leafs to CPUID_LNX_4 to reflect it's a
Linux-defined leaf.
Rename leaf 12 as CPUID_DUMMY which will be replaced by a meaningful
name in the next patch when CPUID.7.1:EAX occupies world 12.
Maximum number of RMID and cache occupancy scale are retrieved from
CPUID.0xf.1 after scattered CQM features are enumerated. Carve out the
code into a separate function.
KVM doesn't support resctrl now. So it's safe to move the
X86_FEATURE_CQM_* features to scattered features word 11 for KVM.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Babu Moger <babu.moger@amd.com>
Cc: "Chang S. Bae" <chang.seok.bae@intel.com>
Cc: "Sean J Christopherson" <sean.j.christopherson@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Sherry Hurwitz <sherry.hurwitz@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86 <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560794416-217638-2-git-send-email-fenghua.yu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 45fc56e629caa451467e7664fbd4c797c434a6c4 upstream
... into a separate function for better readability. Split out from a
patch from Fenghua Yu <fenghua.yu@intel.com> to keep the mechanical,
sole code movement separate for easy review.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: x86@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7366aeb77cd840f3edea02c65065d40affaa7f45 upstream.
GPU hang observed during the guest OCL conformance test which is caused
by THP GTT feature used durning the test.
It was observed the same GFN with different size (4K and 2M) requested
from the guest in GVT. So during the guest page dma map stage, it is
required to unmap first with orginal size and then remap again with
requested size.
Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support")
Cc: stable@vger.kernel.org
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95eef14cdad150fed43147bcd4f29eea3d0a3f03 upstream.
We got the wrong offsets (could they have changed?). New values were
computed off an error state by looking up the register offset in the
context image as written by the HW.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 1de401c08fa805 ("drm/i915/perf: enable perf support on ICL")
Cc: <stable@vger.kernel.org> # v4.18+
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610081914.25428-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 8dcfdfb4501012a8d36d2157dc73925715f2befb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dc25b239ebeaa3c58e5ceaa732140427d386aa16 upstream.
The field flow->resync_npkts is added for TID RDMA WRITE request and
zero-ed when a TID RDMA WRITE RESP packet is received by the requester.
This field is used to rewind a request during retry in the function
hfi1_tid_rdma_restart_req() shared by both TID RDMA WRITE and TID RDMA
READ requests. Therefore, when a TID RDMA READ request is retried, this
field may not be initialized at all, which causes the retry to start at an
incorrect psn, leading to the drop of the retry request by the responder.
This patch fixes the problem by zeroing out the field when the flow memory
is allocated.
Fixes: 838b6fd2d9ca ("IB/hfi1: TID RDMA RcvArray programming and TID allocation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164534.74174.6177.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f4d46119f214f9a7620b0d18b153d7e0e8c90b4f upstream.
When a TID sequence error occurs while receiving TID RDMA READ RESP
packets, all packets after flow->flow_state.r_next_psn should be dropped,
including those response packets for subsequent segments.
The current implementation will drop the subsequent response packets for
the segment to complete next, but may accept packets for subsequent
segments and therefore mistakenly advance the r_next_psn fields for the
corresponding software flows. This may result in failures to complete
subsequent segments after the current segment is completed.
The fix is to only use the flow pointed by req->clear_tail for checking
KDETH PSN instead of finding a flow from the request's flow array.
Fixes: b885d5be9ca1 ("IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164540.74174.54702.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd48a82087231fdba0e77521102386c6ed0168d6 upstream.
The call to alloc_rsm_map_table does not check if the kmalloc fails.
Check for a NULL on alloc, and bail if it fails.
Fixes: 372cc85a13c9 ("IB/hfi1: Extract RSM map table init from QOS")
Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: John Fleck <john.fleck@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b7165bd0d6cbb93732559be6ea8774653b204480 upstream.
The specification for the Toeplitz function doesn't require to set the key
explicitly to be symmetric. In case a symmetric functionality is required
a symmetric key can be simply used.
Wrongly forcing the algorithm to symmetric causes the wrong packet
distribution and a performance degradation.
Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.7
Fixes: 28d6137008b2 ("IB/mlx5: Add RSS QP support")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Alex Vainman <alexv@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9332dad987018745a0c0bb718d12dacfa760489 upstream.
Any dma map underlying the MR should only be freed once the MR is fenced
at the hardware.
As of the above we first destroy the MKEY and just after that can safely
call to dma_unmap_single().
Link: https://lore.kernel.org/r/20190723065733.4899-6-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.3
Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9ec4483a3f0f71a228a5933bc040441322bfb090 upstream.
Fix unreg_umr to move the MR to a kernel owned PD (i.e. the UMR PD) which
can't be accessed by userspace.
This ensures that nothing can continue to access the MR once it has been
placed in the kernels cache for reuse.
MRs in the cache continue to have their HW state, including DMA tables,
present. Even though the MR has been invalidated, changing the PD provides
an additional layer of protection against use of the MR.
Link: https://lore.kernel.org/r/20190723065733.4899-5-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit afd1417404fba6dbfa6c0a8e5763bd348da682e4 upstream.
Use a direct firmware command to destroy the mkey in case the unreg UMR
operation has failed.
This prevents a case that a mkey will leak out from the cache post a
failure to be destroyed by a UMR WR.
In case the MR cache limit didn't reach a call to add another entry to the
cache instead of the destroyed one is issued.
In addition, replaced a warn message to WARN_ON() as this flow is fatal
and can't happen unless some bug around.
Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.10
Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6a053953739d23694474a5f9c81d1a30093da81a upstream.
Fix unreg_umr to ignore the mkey state and do not fail if was freed. This
prevents a case that a user space application already changed the mkey
state to free and then the UMR operation will fail leaving the mkey in an
inappropriate state.
Link: https://lore.kernel.org/r/20190723065733.4899-3-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.19
Fixes: 968e78dd9644 ("IB/mlx5: Enhance UMR support to allow partial page table update")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 621e55ff5b8e0ab5d1063f0eae0ef3960bef8f6e upstream.
lockdep reports:
WARNING: possible circular locking dependency detected
modprobe/302 is trying to acquire lock:
0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990
but task is already holding lock:
000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&device->client_data_rwsem){++++}:
down_read+0x3f/0x160
ib_get_net_dev_by_params+0xd5/0x200 [ib_core]
cma_ib_req_handler+0x5f6/0x2090 [rdma_cm]
cm_process_work+0x29/0x110 [ib_cm]
cm_req_handler+0x10f5/0x1c00 [ib_cm]
cm_work_handler+0x54c/0x311d [ib_cm]
process_one_work+0x4aa/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30
-> #1 ((work_completion)(&(&work->work)->work)){+.+.}:
process_one_work+0x45f/0xa30
worker_thread+0x62/0x5b0
kthread+0x1ca/0x1f0
ret_from_fork+0x24/0x30
-> #0 ((wq_completion)ib_cm){+.+.}:
lock_acquire+0xc8/0x1d0
flush_workqueue+0x102/0x990
cm_remove_one+0x30e/0x3c0 [ib_cm]
remove_client_context+0x94/0xd0 [ib_core]
disable_device+0x10a/0x1f0 [ib_core]
__ib_unregister_device+0x5a/0xe0 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib]
__mlx5_ib_remove+0x3d/0x70 [mlx5_ib]
mlx5_ib_remove+0x12e/0x140 [mlx5_ib]
mlx5_remove_device+0x144/0x150 [mlx5_core]
mlx5_unregister_interface+0x3f/0xf0 [mlx5_core]
mlx5_ib_cleanup+0x10/0x3a [mlx5_ib]
__x64_sys_delete_module+0x227/0x350
do_syscall_64+0xc3/0x6a4
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.
The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.
Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.
This will fence the two unregistration paths without holding any locks.
Cc: <stable@vger.kernel.org>
Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c56b593d2af4cbd189c6af5fd6790728fade80cc upstream.
A GID entry consists of GID, vlan, netdev and smac. Extend GID duplicate
check comparisons to consider vlan_id as well to support IPv6 VLAN based
link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to
hold gid and vlan_id information.
The issue is discussed in the following thread
https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com
Fixes: 823b23da7113 ("IB/core: Allow vlan link local address based RoCE GIDs")
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Co-developed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d1502f629c9966743de45744f4c1ba93a57d105 upstream.
'commit df9bde015a72 ("xen/gntdev.c: convert to use vm_map_pages()")'
breaks gntdev driver. If vma->vm_pgoff > 0, vm_map_pages()
will:
- use map->pages starting at vma->vm_pgoff instead of 0
- verify map->count against vma_pages()+vma->vm_pgoff instead of just
vma_pages().
In practice, this breaks using a single gntdev FD for mapping multiple
grants.
relevant strace output:
[pid 857] ioctl(7, IOCTL_GNTDEV_MAP_GRANT_REF, 0x7ffd3407b6d0) = 0
[pid 857] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 7, 0) =
0x777f1211b000
[pid 857] ioctl(7, IOCTL_GNTDEV_SET_UNMAP_NOTIFY, 0x7ffd3407b710) = 0
[pid 857] ioctl(7, IOCTL_GNTDEV_MAP_GRANT_REF, 0x7ffd3407b6d0) = 0
[pid 857] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 7,
0x1000) = -1 ENXIO (No such device or address)
details here:
https://github.com/QubesOS/qubes-issues/issues/5199
The reason is -> ( copying Marek's word from discussion)
vma->vm_pgoff is used as index passed to gntdev_find_map_index. It's
basically using this parameter for "which grant reference to map".
map struct returned by gntdev_find_map_index() describes just the pages
to be mapped. Specifically map->pages[0] should be mapped at
vma->vm_start, not vma->vm_start+vma->vm_pgoff*PAGE_SIZE.
When trying to map grant with index (aka vma->vm_pgoff) > 1,
__vm_map_pages() will refuse to map it because it will expect map->count
to be at least vma_pages(vma)+vma->vm_pgoff, while it is exactly
vma_pages(vma).
Converting vm_map_pages() to use vm_map_pages_zero() will fix the
problem.
Marek has tested and confirmed the same.
Cc: stable@vger.kernel.org # v5.2+
Fixes: df9bde015a72 ("xen/gntdev.c: convert to use vm_map_pages()")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 50f6393f9654c561df4cdcf8e6cfba7260143601 upstream.
The condition in xen_swiotlb_free_coherent() for deciding whether to
call xen_destroy_contiguous_region() is wrong: in case the region to
be freed is not contiguous calling xen_destroy_contiguous_region() is
the wrong thing to do: it would result in inconsistent mappings of
multiple PFNs to the same MFN. This will lead to various strange
crashes or data corruption.
Instead of calling xen_destroy_contiguous_region() in that case a
warning should be issued as that situation should never occur.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b5c8f0063e4b263cf2de82029798183cf85c320 upstream.
Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()")
once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere")
resurrected kill_bdev() and it has been there since then. So buffer_head
mappings still get killed on a server disconnection, and we can still
hit the BUG_ON on a filesystem on the top of the nbd device.
EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null)
block nbd0: Receive control failed (result -32)
block nbd0: shutting down sockets
print_req_error: I/O error, dev nbd0, sector 66264 flags 3000
EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block
print_req_error: I/O error, dev nbd0, sector 2264 flags 3000
EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block
EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure
------------[ cut here ]------------
kernel BUG at fs/buffer.c:3057!
invalid opcode: 0000 [#1] SMP PTI
CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4
Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017
RIP: 0010:submit_bh_wbc+0x18b/0x190
...
Call Trace:
jbd2_write_superblock+0xf1/0x230 [jbd2]
? account_entity_enqueue+0xc5/0xf0
jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2]
jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2]
? __switch_to_asm+0x40/0x70
...
? lock_timer_base+0x67/0x80
kjournald2+0x121/0x360 [jbd2]
? remove_wait_queue+0x60/0x60
kthread+0xf8/0x130
? commit_timeout+0x10/0x10 [jbd2]
? kthread_bind+0x10/0x10
ret_from_fork+0x35/0x40
With __invalidate_device(), I no longer hit the BUG_ON with sync or
unmount on the disconnected device.
Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere")
Cc: linux-block@vger.kernel.org
Cc: Ratna Manoj Bolla <manoj.br@gmail.com>
Cc: nbd@other.debian.org
Cc: stable@vger.kernel.org
Cc: David Woodhouse <dwmw@amazon.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream.
Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.
E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then
HBA will fault the firmware.
Driver will set 63-bit DMA mask to ensure the above address will not be
used.
Cc: <stable@vger.kernel.org> # 5.1.20+
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c93d059a80450af99dd6c0e8c36790579343675a upstream.
The 13MHz clock should be registered before clocksource driver is
initialized. Use CLK_OF_DECLARE_DRIVER() to guarantee.
Fixes: acddfc2c261b ("clk: mediatek: Add MT8183 clock support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0ee879187df966ef638031b5f5183078d672141 upstream.
[root@localhost ~]# ./liburing/test/link
QEMU Standard PC report that:
[ 29.379892] CPU: 0 PID: 84 Comm: kworker/u2:2 Not tainted 5.3.0-rc2-00051-g4010b622f1d2-dirty #86
[ 29.379902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 29.379913] Workqueue: io_ring-wq io_sq_wq_submit_work
[ 29.379929] Call Trace:
[ 29.379953] dump_stack+0xa9/0x10e
[ 29.379970] ? io_sq_wq_submit_work+0xbf4/0xe90
[ 29.379986] print_address_description.cold.6+0x9/0x317
[ 29.379999] ? io_sq_wq_submit_work+0xbf4/0xe90
[ 29.380010] ? io_sq_wq_submit_work+0xbf4/0xe90
[ 29.380026] __kasan_report.cold.7+0x1a/0x34
[ 29.380044] ? io_sq_wq_submit_work+0xbf4/0xe90
[ 29.380061] kasan_report+0xe/0x12
[ 29.380076] io_sq_wq_submit_work+0xbf4/0xe90
[ 29.380104] ? io_sq_thread+0xaf0/0xaf0
[ 29.380152] process_one_work+0xb59/0x19e0
[ 29.380184] ? pwq_dec_nr_in_flight+0x2c0/0x2c0
[ 29.380221] worker_thread+0x8c/0xf40
[ 29.380248] ? __kthread_parkme+0xab/0x110
[ 29.380265] ? process_one_work+0x19e0/0x19e0
[ 29.380278] kthread+0x30b/0x3d0
[ 29.380292] ? kthread_create_on_node+0xe0/0xe0
[ 29.380311] ret_from_fork+0x3a/0x50
[ 29.380635] Allocated by task 209:
[ 29.381255] save_stack+0x19/0x80
[ 29.381268] __kasan_kmalloc.constprop.6+0xc1/0xd0
[ 29.381279] kmem_cache_alloc+0xc0/0x240
[ 29.381289] io_submit_sqe+0x11bc/0x1c70
[ 29.381300] io_ring_submit+0x174/0x3c0
[ 29.381311] __x64_sys_io_uring_enter+0x601/0x780
[ 29.381322] do_syscall_64+0x9f/0x4d0
[ 29.381336] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 29.381633] Freed by task 84:
[ 29.382186] save_stack+0x19/0x80
[ 29.382198] __kasan_slab_free+0x11d/0x160
[ 29.382210] kmem_cache_free+0x8c/0x2f0
[ 29.382220] io_put_req+0x22/0x30
[ 29.382230] io_sq_wq_submit_work+0x28b/0xe90
[ 29.382241] process_one_work+0xb59/0x19e0
[ 29.382251] worker_thread+0x8c/0xf40
[ 29.382262] kthread+0x30b/0x3d0
[ 29.382272] ret_from_fork+0x3a/0x50
[ 29.382569] The buggy address belongs to the object at ffff888067172140
which belongs to the cache io_kiocb of size 224
[ 29.384692] The buggy address is located 120 bytes inside of
224-byte region [ffff888067172140, ffff888067172220)
[ 29.386723] The buggy address belongs to the page:
[ 29.387575] page:ffffea00019c5c80 refcount:1 mapcount:0 mapping:ffff88806ace5180 index:0x0
[ 29.387587] flags: 0x100000000000200(slab)
[ 29.387603] raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806ace5180
[ 29.387617] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
[ 29.387624] page dumped because: kasan: bad access detected
[ 29.387920] Memory state around the buggy address:
[ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 29.392578] ^
[ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
[ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 29.396003] ==================================================================
[ 29.397260] Disabling lock debugging due to kernel taint
io_sq_wq_submit_work free and read req again.
Cc: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Cc: linux-block@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: f7b76ac9d17e ("io_uring: fix counter inc/dec mismatch in async_list")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 147b9635e6347104b91f48ca9dca61eb0fbf2a54 upstream.
If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have
their architecturally maximum values, which defeats the use of
FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous
machines.
Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively
saturate at zero.
Fixes: 3c739b571084 ("arm64: Keep track of CPU feature registers")
Cc: <stable@vger.kernel.org> # 4.4.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 849adec41203ac5837c40c2d7e08490ffdef3c2c upstream.
Commit d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte
watchpoints on all addresses") changed the validation requirements for
hardware watchpoints on arch/arm/. Update our compat layer to implement
the same relaxation.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d7fd70f26039bd4b33444ca47f0e69ce3ae0354 upstream.
Handling of the CPU_PM_ENTER_FAILED transition in the Arm PMU PM
notifier code incorrectly skips restoration of the counters. Fix the
logic so that CPU_PM_ENTER_FAILED follows the same path as CPU_PM_EXIT.
Cc: <stable@vger.kernel.org>
Fixes: da4e4f18afe0f372 ("drivers/perf: arm_pmu: implement CPU_PM notifier")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3fe6c873af2f2247544debdbe51ec29f690a2ccf upstream.
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get
that huge that we need to increase the start addresss for the decompression
text section otherwise one will face a linker error.
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e50beea8e7738377b4fa664078547be338038ff9 upstream.
Same as on x86-64, strip the .comment, .note and debug sections from the
Linux kernel before creating the compressed image for the boot loader.
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reported-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2c5ed0dd5004c2cff5c0e3d430a107576fcc17f upstream.
Apparently we don't have an archclean target in our
arch/parisc/Makefile, so files in there never get cleaned out by make
mrproper. This, in turn means that the sizes.h file in
arch/parisc/boot/compressed never gets removed and worse, when you
transition to an O=build/parisc[64] build model it overrides the
generated file. The upshot being my bzImage was building with a SZ_end
that was too small.
I fixed it by making mrproper clean everything.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b59b1baab789eacdde809135542e3d4f256f6878 upstream.
On my laptop most memcg kselftests were being skipped because it claimed
cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it
seems current systemd HEAD mounts it with the name "cgroup2" instead of
"cgroup":
% grep cgroup /proc/mounts
cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0
I can't think of a reason to need to check fs_spec explicitly
since it's arbitrary, so we can just rely on fs_vfstype.
After these changes, `make TARGETS=cgroup kselftest` actually runs the
cgroup v2 tests in more cases.
Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 41995342b40c418a47603e1321256d2c4a2ed0fb upstream.
After getting a storage server event that causes the DASD device driver
to update its unit address configuration during a device shutdown there is
the possibility of an endless loop in the device driver.
In the system log there will be ongoing DASD error messages with RC: -19.
The reason is that the loop starting the ruac request only terminates when
the retry counter is decreased to 0. But in the sleep_on function there are
early exit paths that do not decrease the retry counter.
Prevent an endless loop by handling those cases separately.
Remove the unnecessary do..while loop since the sleep_on function takes
care of retries by itself.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org # 2.6.25+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89e524c04fa966330e2e80ab2bc50b9944c5847a upstream.
Commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive
opener") made LOOP_SET_FD ioctl acquire exclusive block device reference
while it updates loop device binding. However this can make perfectly
valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding
temporarily the exclusive bdev reference in cases like this:
for i in {a..z}{a..z}; do
dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024
mkfs.ext2 $i.image
mkdir mnt$i
done
echo "Run"
for i in {a..z}{a..z}; do
mount -o loop -t ext2 $i.image mnt$i &
done
Fix the problem by not getting full exclusive bdev reference in
LOOP_SET_FD but instead just mark the bdev as being claimed while we
update the binding information. This just blocks new exclusive openers
instead of failing them with EBUSY thus fixing the problem.
Fixes: 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener")
Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7b358c6f12dc82364f6d317f8c8f1d794adbc3f5 upstream.
When CONFIG_MIGRATE_VMA_HELPER is enabled, migrate_vma() calls
migrate_vma_collect() which initializes a struct mm_walk but didn't
initialize mm_walk.pud_entry. (Found by code inspection) Use a C
structure initialization to make sure it is set to NULL.
Link: http://lkml.kernel.org/r/20190719233225.12243-1-rcampbell@nvidia.com
Fixes: 8763cb45ab967 ("mm/migrate: new memory migration helper for use with device memory")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af700eaed0564d5d3963a7a51cb0843629d7fe3d upstream.
objtool points out several conditions that it does not like, depending
on the combination with other configuration options and compiler
variants:
stack protector:
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0xbf: call to __stack_chk_fail() with UACCESS enabled
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0xbe: call to __stack_chk_fail() with UACCESS enabled
stackleak plugin:
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x4a: call to stackleak_track_stack() with UACCESS enabled
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x4a: call to stackleak_track_stack() with UACCESS enabled
kasan:
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x25: call to memcpy() with UACCESS enabled
lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x25: call to memcpy() with UACCESS enabled
The stackleak and kasan options just need to be disabled for this file
as we do for other files already. For the stack protector, we already
attempt to disable it, but this fails on clang because the check is
mixed with the gcc specific -fno-conserve-stack option. According to
Andrey Ryabinin, that option is not even needed, dropping it here fixes
the stackprotector issue.
Link: http://lkml.kernel.org/r/20190722125139.1335385-1-arnd@arndb.de
Link: https://lore.kernel.org/lkml/20190617123109.667090-1-arnd@arndb.de/t/
Link: https://lore.kernel.org/lkml/20190722091050.2188664-1-arnd@arndb.de/t/
Fixes: d08965a27e84 ("x86/uaccess, ubsan: Fix UBSAN vs. SMAP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 670105a25608affe01cb0ccdc2a1f4bd2327172b upstream.
"howaboutsynergy" reported via kernel buzilla number 204165 that
compact_zone_order was consuming 100% CPU during a stress test for
prolonged periods of time. Specifically the following command, which
should exit in 10 seconds, was taking an excessive time to finish while
the CPU was pegged at 100%.
stress -m 220 --vm-bytes 1000000000 --timeout 10
Tracing indicated a pattern as follows
stress-3923 [007] 519.106208: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106212: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106216: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106219: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106223: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106227: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106231: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106235: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106238: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
stress-3923 [007] 519.106242: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0
Note that compaction is entered in rapid succession while scanning and
isolating nothing. The problem is that when a task that is compacting
receives a fatal signal, it retries indefinitely instead of exiting
while making no progress as a fatal signal is pending.
It's not easy to trigger this condition although enabling zswap helps on
the basis that the timing is altered. A very small window has to be hit
for the problem to occur (signal delivered while compacting and
isolating a PFN for migration that is not aligned to SWAP_CLUSTER_MAX).
This was reproduced locally -- 16G single socket system, 8G swap, 30%
zswap configured, vm-bytes 22000000000 using Colin Kings stress-ng
implementation from github running in a loop until the problem hits).
Tracing recorded the problem occurring almost 200K times in a short
window. With this patch, the problem hit 4 times but the task existed
normally instead of consuming CPU.
This problem has existed for some time but it was made worse by commit
cf66f0700c8f ("mm, compaction: do not consider a need to reschedule as
contention"). Before that commit, if the same condition was hit then
locks would be quickly contended and compaction would exit that way.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204165
Link: http://lkml.kernel.org/r/20190718085708.GE24383@techsingularity.net
Fixes: cf66f0700c8f ("mm, compaction: do not consider a need to reschedule as contention")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [5.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ebdf4de5642fb6580b0763158b6b4b791c4d6a4d upstream.
buffer_migrate_page_norefs() can race with bh users in the following
way:
CPU1 CPU2
buffer_migrate_page_norefs()
buffer_migrate_lock_buffers()
checks bh refs
spin_unlock(&mapping->private_lock)
__find_get_block()
spin_lock(&mapping->private_lock)
grab bh ref
spin_unlock(&mapping->private_lock)
move page do bh work
This can result in various issues like lost updates to buffers (i.e.
metadata corruption) or use after free issues for the old page.
This patch closes the race by holding mapping->private_lock while the
mapping is being moved to a new page. Ordinarily, a reference can be
taken outside of the private_lock using the per-cpu BH LRU but the
references are checked and the LRU invalidated if necessary. The
private_lock is held once the references are known so the buffer lookup
slow path will spin on the private_lock. Between the page lock and
private_lock, it should be impossible for other references to be
acquired and updates to happen during the migration.
A user had reported data corruption issues on a distribution kernel with
a similar page migration implementation as mainline. The data
corruption could not be reproduced with this patch applied. A small
number of migration-intensive tests were run and no performance problems
were noted.
[mgorman@techsingularity.net: Changelog, removed tracing]
Link: http://lkml.kernel.org/r/20190718090238.GF24383@techsingularity.net
Fixes: 89cb0888ca14 "mm: migrate: provide buffer_migrate_page_norefs()"
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
shrinker
commit fa1e512fac717f34e7c12d7a384c46e90a647392 upstream.
Shakeel Butt reported premature oom on kernel with
"cgroup_disable=memory" since mem_cgroup_is_root() returns false even
though memcg is actually NULL. The drop_caches is also broken.
It is because commit aeed1d325d42 ("mm/vmscan.c: generalize
shrink_slab() calls in shrink_node()") removed the !memcg check before
!mem_cgroup_is_root(). And, surprisingly root memcg is allocated even
though memory cgroup is disabled by kernel boot parameter.
Add mem_cgroup_disabled() check to make reclaimer work as expected.
Link: http://lkml.kernel.org/r/1563385526-20805-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: aeed1d325d42 ("mm/vmscan.c: generalize shrink_slab() calls in shrink_node()")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jan Hadrava <had@kam.mff.cuni.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [4.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74bf71ed792ab0f64631cc65ccdb54c356c36d45 upstream.
Distribution installation images such as Debian include different sets
of modules which can be downloaded dynamically. Such images may notably
include the hda sound modules but not the i915 DRM module, even if the
latter was enabled at build time, as reported on
https://bugs.debian.org/931507
In such a case hdac_i915 would be linked in and try to load the i915
module, fail since it is not there, but still wait for a whole minute
before giving up binding with it.
This fixes such as case by only waiting for the binding if the module
was properly loaded (or module support is disabled, in which case i915
is already compiled-in anyway).
Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 45385237f65aeee73641f1ef737d7273905a233f upstream.
Since roles_init() adds some entries to the role hash table, we need to
destroy also its keys/values on error, otherwise we get a memory leak in
the error path.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+fee3a14d4cdf92646287@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d7e23b887f67178c4f840781be7a6aa6aeb52ab1 upstream.
Due to commit 4a6d8cf90017 ("powerpc/mm: don't use pte_alloc_kernel()
until slab is available on PPC32"), pte_alloc_kernel() cannot be used
during early KASAN init.
Fix it by using memblock_alloc() instead.
Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da89670093651437f27d2975224712e0a130b055.1564552796.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1ac6704493fa14b5dc19eb6b69a73932361a131 upstream.
In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock
offset of 3 cycles (compared to 4 in eg. SAMA5D3).
Cc: stable@vger.kernel.org # 5.2.x
[needs applying to i2c-at91.c instead for earlier kernels]
Fixes: 0ef6f3213dac ("i2c: at91: add support for new alternative command mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|