summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-16Linux 3.14.27v3.14.27Greg Kroah-Hartman
2014-12-16ALSA: usb-audio: Don't resubmit pending URBs at MIDI error recoveryTakashi Iwai
commit 66139a48cee1530c91f37c145384b4ee7043f0b7 upstream. In snd_usbmidi_error_timer(), the driver tries to resubmit MIDI input URBs to reactivate the MIDI stream, but this causes the error when some of URBs are still pending like: WARNING: CPU: 0 PID: 0 at ../drivers/usb/core/urb.c:339 usb_submit_urb+0x5f/0x70() URB ef705c40 submitted while active CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.6-2-desktop #1 Hardware name: FOXCONN TPS01/TPS01, BIOS 080015 03/23/2010 c0984bfa f4009ed4 c078deaf f4009ee4 c024c884 c09a135c f4009f00 00000000 c0984bfa 00000153 c061ac4f c061ac4f 00000009 00000001 ef705c40 e854d1c0 f4009eec c024c8d3 00000009 f4009ee4 c09a135c f4009f00 f4009f04 c061ac4f Call Trace: [<c0205df6>] try_stack_unwind+0x156/0x170 [<c020482a>] dump_trace+0x5a/0x1b0 [<c0205e56>] show_trace_log_lvl+0x46/0x50 [<c02049d1>] show_stack_log_lvl+0x51/0xe0 [<c0205eb7>] show_stack+0x27/0x50 [<c078deaf>] dump_stack+0x45/0x65 [<c024c884>] warn_slowpath_common+0x84/0xa0 [<c024c8d3>] warn_slowpath_fmt+0x33/0x40 [<c061ac4f>] usb_submit_urb+0x5f/0x70 [<f7974104>] snd_usbmidi_submit_urb+0x14/0x60 [snd_usbmidi_lib] [<f797483a>] snd_usbmidi_error_timer+0x6a/0xa0 [snd_usbmidi_lib] [<c02570c0>] call_timer_fn+0x30/0x130 [<c0257442>] run_timer_softirq+0x1c2/0x260 [<c0251493>] __do_softirq+0xc3/0x270 [<c0204732>] do_softirq_own_stack+0x22/0x30 [<c025186d>] irq_exit+0x8d/0xa0 [<c0795228>] smp_apic_timer_interrupt+0x38/0x50 [<c0794a3c>] apic_timer_interrupt+0x34/0x3c [<c0673d9e>] cpuidle_enter_state+0x3e/0xd0 [<c028bb8d>] cpu_idle_loop+0x29d/0x3e0 [<c028bd23>] cpu_startup_entry+0x53/0x60 [<c0bfac1e>] start_kernel+0x415/0x41a For avoiding these errors, check the pending URBs and skip resubmitting such ones. Reported-and-tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16ALSA: hda - Fix built-in mic at resume on Lenovo Ideapad S210Takashi Iwai
commit fedb2245cbb8d823e449ebdd48ba9bb35c071ce0 upstream. The built-in mic boost volume gets almost muted after suspend/resume on Lenovo Ideapad S210. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88121 Reported-and-tested-by: Roman Kagan <rkagan@mail.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16ALSA: hda - Add EAPD fixup for ASUS Z99He laptopTakashi Iwai
commit f62f5eff3d40a56ad1cf0d81a6cac8dd8743e8a1 upstream. The same fixup to enable EAPD is needed for ASUS Z99He with AD1986A codec like another ASUS machine. Reported-and-tested-by: Dmitry V. Zimin <pfzim@mail.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16mac80211: Fix regression that triggers a kernel BUG with CCMPRonald Wahl
commit 4f031fa9f188b2b0641ac20087d9e16bcfb4e49d upstream. Commit 7ec7c4a9a686c608315739ab6a2b0527a240883c (mac80211: port CCMP to cryptoapi's CCM driver) introduced a regression when decrypting empty packets (data_len == 0). This will lead to backtraces like: (scatterwalk_start) from [<c01312f4>] (scatterwalk_map_and_copy+0x2c/0xa8) (scatterwalk_map_and_copy) from [<c013a5a0>] (crypto_ccm_decrypt+0x7c/0x25c) (crypto_ccm_decrypt) from [<c032886c>] (ieee80211_aes_ccm_decrypt+0x160/0x170) (ieee80211_aes_ccm_decrypt) from [<c031c628>] (ieee80211_crypto_ccmp_decrypt+0x1ac/0x238) (ieee80211_crypto_ccmp_decrypt) from [<c032ef28>] (ieee80211_rx_handlers+0x870/0x1d24) (ieee80211_rx_handlers) from [<c0330c7c>] (ieee80211_prepare_and_rx_handle+0x8a0/0x91c) (ieee80211_prepare_and_rx_handle) from [<c0331260>] (ieee80211_rx+0x568/0x730) (ieee80211_rx) from [<c01d3054>] (__carl9170_rx+0x94c/0xa20) (__carl9170_rx) from [<c01d3324>] (carl9170_rx_stream+0x1fc/0x320) (carl9170_rx_stream) from [<c01cbccc>] (carl9170_usb_tasklet+0x80/0xc8) (carl9170_usb_tasklet) from [<c00199dc>] (tasklet_hi_action+0x88/0xcc) (tasklet_hi_action) from [<c00193c8>] (__do_softirq+0xcc/0x200) (__do_softirq) from [<c0019734>] (irq_exit+0x80/0xe0) (irq_exit) from [<c0009c10>] (handle_IRQ+0x64/0x80) (handle_IRQ) from [<c000c3a0>] (__irq_svc+0x40/0x4c) (__irq_svc) from [<c0009d44>] (arch_cpu_idle+0x2c/0x34) Such packets can appear for example when using the carl9170 wireless driver because hardware sometimes generates garbage when the internal FIFO overruns. This patch adds an additional length check. Fixes: 7ec7c4a9a686 ("mac80211: port CCMP to cryptoapi's CCM driver") Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16powerpc: 32 bit getcpu VDSO function uses 64 bit instructionsAnton Blanchard
commit 152d44a853e42952f6c8a504fb1f8eefd21fd5fd upstream. I used some 64 bit instructions when adding the 32 bit getcpu VDSO function. Fix it. Fixes: 18ad51dd342a ("powerpc: Add VDSO version of getcpu") Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16igb: bring link up when PHY is powered upTodd Fujinaka
commit aec653c43b0c55667355e26d7de1236bda9fb4e3 upstream. Call igb_setup_link() when the PHY is powered up. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Reported-by: Jeff Westfahl <jeff.westfahl@ni.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16perf/x86/intel: Protect LBR and extra_regs against KVM lyingKan Liang
commit 338b522ca43cfd32d11a370f4203bcd089c6c877 upstream. With -cpu host, KVM reports LBR and extra_regs support, if the host has support. When the guest perf driver tries to access LBR or extra_regs MSR, it #GPs all MSR accesses,since KVM doesn't handle LBR and extra_regs support. So check the related MSRs access right once at initialization time to avoid the error access at runtime. For reproducing the issue, please build the kernel with CONFIG_KVM_INTEL = y (for host kernel). And CONFIG_PARAVIRT = n and CONFIG_KVM_GUEST = n (for guest kernel). Start the guest with -cpu host. Run perf record with --branch-any or --branch-filter in guest to trigger LBR Run perf stat offcore events (E.g. LLC-loads/LLC-load-misses ...) in guest to trigger offcore_rsp #GP Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1405365957-20202-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Dongsu Park <dongsu.park@profitbricks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16net: sctp: use MAX_HEADER for headroom reserve in output pathDaniel Borkmann
[ Upstream commit 9772b54c55266ce80c639a80aa68eeb908f8ecf5 ] To accomodate for enough headroom for tunnels, use MAX_HEADER instead of LL_MAX_HEADER. Robert reported that he has hit after roughly 40hrs of trinity an skb_under_panic() via SCTP output path (see reference). I couldn't reproduce it from here, but not using MAX_HEADER as elsewhere in other protocols might be one possible cause for this. In any case, it looks like accounting on chunks themself seems to look good as the skb already passed the SCTP output path and did not hit any skb_over_panic(). Given tunneling was enabled in his .config, the headroom would have been expanded by MAX_HEADER in this case. Reported-by: Robert Święcki <robert@swiecki.net> Reference: https://lkml.org/lkml/2014/12/1/507 Fixes: 594ccc14dfe4d ("[SCTP] Replace incorrect use of dev_alloc_skb with alloc_skb in sctp_packet_transmit().") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16net: mvneta: fix race condition in mvneta_tx()Eric Dumazet
[ Upstream commit 5f478b41033606d325e420df693162e2524c2b94 ] mvneta_tx() dereferences skb to get skb->len too late, as hardware might have completed the transmit and TX completion could have freed the skb from another cpu. Fixes: 71f6d1b31fb1 ("net: mvneta: replace Tx timer with a real interrupt") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16net: mvneta: fix Tx interrupt delaywilly tarreau
[ Upstream commit aebea2ba0f7495e1a1c9ea5e753d146cb2f6b845 ] The mvneta driver sets the amount of Tx coalesce packets to 16 by default. Normally that does not cause any trouble since the driver uses a much larger Tx ring size (532 packets). But some sockets might run with very small buffers, much smaller than the equivalent of 16 packets. This is what ping is doing for example, by setting SNDBUF to 324 bytes rounded up to 2kB by the kernel. The problem is that there is no documented method to force a specific packet to emit an interrupt (eg: the last of the ring) nor is it possible to make the NIC emit an interrupt after a given delay. In this case, it causes trouble, because when ping sends packets over its raw socket, the few first packets leave the system, and the first 15 packets will be emitted without an IRQ being generated, so without the skbs being freed. And since the socket's buffer is small, there's no way to reach that amount of packets, and the ping ends up with "send: no buffer available" after sending 6 packets. Running with 3 instances of ping in parallel is enough to hide the problem, because with 6 packets per instance, that's 18 packets total, which is enough to grant a Tx interrupt before all are sent. The original driver in the LSP kernel worked around this design flaw by using a software timer to clean up the Tx descriptors. This timer was slow and caused terrible network performance on some Tx-bound workloads (such as routing) but was enough to make tools like ping work correctly. Instead here, we simply set the packet counts before interrupt to 1. This ensures that each packet sent will produce an interrupt. NAPI takes care of coalescing interrupts since the interrupt is disabled once generated. No measurable performance impact nor CPU usage were observed on small nor large packets, including when saturating the link on Tx, and this fixes tools like ping which rely on too small a send buffer. If one wants to increase this value for certain workloads where it is safe to do so, "ethtool -C $dev tx-frames" will override this default setting. This fix needs to be applied to stable kernels starting with 3.10. Tested-By: Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16gre: Set inner mac header in gro completeTom Herbert
[ Upstream commit 6fb2a756739aa507c1fd5b8126f0bfc2f070dc46 ] Set the inner mac header to point to the GRE payload when doing GRO. This is needed if we proceed to send the packet through GRE GSO which now uses the inner mac header instead of inner network header to determine the length of encapsulation headers. Fixes: 14051f0452a2 ("gre: Use inner mac length when computing tunnel length") Reported-by: Wolfgang Walter <linux@stwm.de> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16rtnetlink: release net refcnt on error in do_setlink()Nicolas Dichtel
[ Upstream commit e0ebde0e131b529fd721b24f62872def5ec3718c ] rtnl_link_get_net() holds a reference on the 'struct net', we need to release it in case of error. CC: Eric W. Biederman <ebiederm@xmission.com> Fixes: b51642f6d77b ("net: Enable a userns root rtnl calls that are safe for unprivilged users") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16net/mlx4_core: Limit count field to 24 bits in qp_alloc_resJack Morgenstein
[ Upstream commit 2d5c57d7fbfaa642fb7f0673df24f32b83d9066c ] Some VF drivers use the upper byte of "param1" (the qp count field) in mlx4_qp_reserve_range() to pass flags which are used to optimize the range allocation. Under the current code, if any of these flags are set, the 32-bit count field yields a count greater than 2^24, which is out of range, and this VF fails. As these flags represent a "best-effort" allocation hint anyway, they may safely be ignored. Therefore, the PF driver may simply mask out the bits. Fixes: c82e9aa0a8 "mlx4_core: resource tracking for HCA resources used by guests" Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16tg3: fix ring init when there are more TX than RX channelsThadeu Lima de Souza Cascardo
[ Upstream commit a620a6bc1c94c22d6c312892be1e0ae171523125 ] If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16Fix race condition between vxlan_sock_add and vxlan_sock_releaseMarcelo Leitner
[ Upstream commit 00c83b01d58068dfeb2e1351cca6fccf2a83fa8f ] Currently, when trying to reuse a socket, vxlan_sock_add will grab vn->sock_lock, locate a reusable socket, inc refcount and release vn->sock_lock. But vxlan_sock_release() will first decrement refcount, and then grab that lock. refcnt operations are atomic but as currently we have deferred works which hold vs->refcnt each, this might happen, leading to a use after free (specially after vxlan_igmp_leave): CPU 1 CPU 2 deferred work vxlan_sock_add ... ... spin_lock(&vn->sock_lock) vs = vxlan_find_sock(); vxlan_sock_release dec vs->refcnt, reaches 0 spin_lock(&vn->sock_lock) vxlan_sock_hold(vs), refcnt=1 spin_unlock(&vn->sock_lock) hlist_del_rcu(&vs->hlist); vxlan_notify_del_rx_port(vs) spin_unlock(&vn->sock_lock) So when we look for a reusable socket, we check if it wasn't freed already before reusing it. Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Fixes: 7c47cedf43a8b3 ("vxlan: move IGMP join/leave to work queue") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16ipv6: gre: fix wrong skb->protocol in WCCPYuri Chislov
[ Upstream commit be6572fdb1bfbe23b2624d477de50af50b02f5d6 ] When using GRE redirection in WCCP, it sets the wrong skb->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Cc: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: Yuri Chislov <yuri.chislov@gmail.com> Tested-by: Yuri Chislov <yuri.chislov@gmail.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16ip_tunnel: the lack of vti_link_ops' dellink() cause kernel paniclucien
[ Upstream commit 20ea60ca9952bd19d4b0d74719daba305aef5178 ] Now the vti_link_ops do not point the .dellink, for fb tunnel device (ip_vti0), the net_device will be removed as the default .dellink is unregister_netdevice_queue,but the tunnel still in the tunnel list, then if we add a new vti tunnel, in ip_tunnel_find(): hlist_for_each_entry_rcu(t, head, hash_node) { if (local == t->parms.iph.saddr && remote == t->parms.iph.daddr && link == t->parms.link && ==> type == t->dev->type && ip_tunnel_key_match(&t->parms, flags, key)) break; } the panic will happen, cause dev of ip_tunnel *t is null: [ 3835.072977] IP: [<ffffffffa04103fd>] ip_tunnel_find+0x9d/0xc0 [ip_tunnel] [ 3835.073008] PGD b2c21067 PUD b7277067 PMD 0 [ 3835.073008] Oops: 0000 [#1] SMP ..... [ 3835.073008] Stack: [ 3835.073008] ffff8800b72d77f0 ffffffffa0411924 ffff8800bb956000 ffff8800b72d78e0 [ 3835.073008] ffff8800b72d78a0 0000000000000000 ffffffffa040d100 ffff8800b72d7858 [ 3835.073008] ffffffffa040b2e3 0000000000000000 0000000000000000 0000000000000000 [ 3835.073008] Call Trace: [ 3835.073008] [<ffffffffa0411924>] ip_tunnel_newlink+0x64/0x160 [ip_tunnel] [ 3835.073008] [<ffffffffa040b2e3>] vti_newlink+0x43/0x70 [ip_vti] [ 3835.073008] [<ffffffff8150d4da>] rtnl_newlink+0x4fa/0x5f0 [ 3835.073008] [<ffffffff812f68bb>] ? nla_strlcpy+0x5b/0x70 [ 3835.073008] [<ffffffff81508fb0>] ? rtnl_link_ops_get+0x40/0x60 [ 3835.073008] [<ffffffff8150d11f>] ? rtnl_newlink+0x13f/0x5f0 [ 3835.073008] [<ffffffff81509cf4>] rtnetlink_rcv_msg+0xa4/0x270 [ 3835.073008] [<ffffffff8126adf5>] ? sock_has_perm+0x75/0x90 [ 3835.073008] [<ffffffff81509c50>] ? rtnetlink_rcv+0x30/0x30 [ 3835.073008] [<ffffffff81529e39>] netlink_rcv_skb+0xa9/0xc0 [ 3835.073008] [<ffffffff81509c48>] rtnetlink_rcv+0x28/0x30 .... modprobe ip_vti ip link del ip_vti0 type vti ip link add ip_vti0 type vti rmmod ip_vti do that one or more times, kernel will panic. fix it by assigning ip_tunnel_dellink to vti_link_ops' dellink, in which we skip the unregister of fb tunnel device. do the same on ip6_vti. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16sata_fsl: fix error handling of irq_of_parse_and_mapDmitry Torokhov
commit aad0b624129709c94c2e19e583b6053520353fa8 upstream. irq_of_parse_and_map() returns 0 on error (the result is unsigned int), so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16ahci: disable MSI on SAMSUNG 0xa800 SSDTejun Heo
commit 2b21ef0aae65f22f5ba86b13c4588f6f0c2dbefb upstream. Just like 0x1600 which got blacklisted by 66a7cbc303f4 ("ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes on NCQ commands if MSI is enabled. Disable MSI. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dominik Mierzejewski <dominik@greysector.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16AHCI: Add DeviceIDs for Sunrise Point-LP SATA controllerDevin Ryles
commit 249cd0a187ed4ef1d0af7f74362cc2791ec5581b upstream. This patch adds DeviceIDs for Sunrise Point-LP. Signed-off-by: Devin Ryles <devin.ryles@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16USB: xhci: Reset a halted endpoint immediately when we encounter a stall.Mathias Nyman
commit 8e71a322fdb127814bcba423a512914ca5bc6cf5 upstream. If a device is halted and reuturns a STALL, then the halted endpoint needs to be cleared both on the host and device side. The host side halt is cleared by issueing a xhci reset endpoint command. The device side is cleared with a ClearFeature(ENDPOINT_HALT) request, which should be issued by the device driver if a URB reruen -EPIPE. Previously we cleared the host side halt after the device side was cleared. To make sure the host side halt is cleared in time we want to issue the reset endpoint command immedialtely when a STALL status is encountered. Otherwise we end up not following the specs and not returning -EPIPE several times in a row when trying to transfer data to a halted endpoint. Fixes: bcef3fd (USB: xhci: Handle errors that cause endpoint halts.) Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16media: smiapp: Only some selection targets are settableSakari Ailus
commit b31eb901c4e5eeef4c83c43dfbc7fe0d4348cb21 upstream. Setting a non-settable selection target caused BUG() to be called. The check for valid selections only takes the selection target into account, but does not tell whether it may be set, or only get. Fix the issue by simply returning an error to the user. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16x86: Use $(OBJDUMP) instead of plain objdumpChris Clayton
commit e2e68ae688b0a3766cd75aedf4ed4e39be402009 upstream. commit e6023367d779 'x86, kaslr: Prevent .bss from overlaping initrd' broke the cross compile of x86. It added a objdump invocation, which invokes the host native objdump and ignores an active cross tool chain. Use $(OBJDUMP) instead which takes the CROSS_COMPILE prefix into account. [ tglx: Massage changelog and use $(OBJDUMP) ] Fixes: e6023367d779 'x86, kaslr: Prevent .bss from overlaping initrd' Signed-off-by: Chris Clayton <chris2553@googlemail.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Borislav Petkov <bp@suse.de> Cc: Junjie Mao <eternal.n08@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/54705C8E.1080400@googlemail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16drm/i915: Unlock panel even when LVDS is disabledDaniel Vetter
commit b0616c5306b342ceca07044dbc4f917d95c4f825 upstream. Otherwise we'll have backtraces in assert_panel_unlocked because the BIOS locks the register. In the reporter's case this regression was introduced in commit c31407a3672aaebb4acddf90944a114fa5c8af7b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Oct 18 21:07:01 2012 +0100 drm/i915: Add no-lvds quirk for Supermicro X7SPA-H Reported-by: Alexey Orishko <alexey.orishko@gmail.com> Cc: Alexey Orishko <alexey.orishko@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Francois Tigeot <ftigeot@wolfpond.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Alexey Orishko <alexey.orishko@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16drm/i915: More cautious with pch fifo underrunsDaniel Vetter
commit b68362278af94e1171f5be9d4e44988601fb0439 upstream. Apparently PCH fifo underruns are tricky, we have plenty reports that we see the occasional underrun (especially at boot-up). So for a change let's see what happens when we don't re-enable pch fifo underrun reporting when the pipe is disabled. This means that the kernel can't catch pch fifo underruns when they happen (except when all pipes are on on the pch). But we'll still catch underruns when disabling the pipe again. So not a terrible reduction in test coverage. Since the DRM_ERROR is new and hence a regression plan B would be to revert it back to a debug output. Which would be a lot worse than this hack for underrun test coverage in the wild. See the referenced discussions for more. References: http://mid.gmane.org/CA+gsUGRfGe3t4NcjdeA=qXysrhLY3r4CEu7z4bjTwxi1uOfy+g@mail.gmail.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85898 References: https://bugs.freedesktop.org/show_bug.cgi?id=85898 References: https://bugs.freedesktop.org/show_bug.cgi?id=86233 References: https://bugs.freedesktop.org/show_bug.cgi?id=86478 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: lu hua <huax.lu@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with ↵Petr Mladek
3.18.0-rc6 commit f5475cc43c899e33098d4db44b7c5e710f16589d upstream. I was unable too boot 3.18.0-rc6 because of the following kernel panic in drm_calc_vbltimestamp_from_scanoutpos(): [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080). [drm] register mmio base: 0xC8400000 [drm] register mmio size: 65536 radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 3829346 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 16M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:0b:01.0: WB disabled radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bbbfa000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Loading R100 Microcode radeon 0000:0b:01.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [drm:r100_cp_init] *ERROR* Failed to load firmware! radeon 0000:0b:01.0: failed initializing CP (-2). radeon 0000:0b:01.0: Disabling GPU acceleration [drm] radeon: cp finalized BUG: unable to handle kernel NULL pointer dereference at 000000000000025c IP: [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-4-default #2649 Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 07/26/2006 task: ffff880234da2010 ti: ffff880234da4000 task.ti: ffff880234da4000 RIP: 0010:[<ffffffff8150423b>] [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP: 0000:ffff880234da7918 EFLAGS: 00010086 RAX: ffffffff81557890 RBX: 0000000000000000 RCX: ffff880234da7a48 RDX: ffff880234da79f4 RSI: 0000000000000000 RDI: ffff880232e15000 RBP: ffff880234da79b8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 0000000000000001 R12: ffff880232dda1c0 R13: ffff880232e1518c R14: 0000000000000292 R15: ffff880232e15000 FS: 0000000000000000(0000) GS:ffff88023fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000025c CR3: 0000000002014000 CR4: 00000000000007e0 Stack: ffff880234da79d8 0000000000000286 ffff880232dcbc00 0000000000002480 ffff880234da7958 0000000000000296 ffff880234da7998 ffffffff8151b51d ffff880234da7a48 0000000032dcbeb0 ffff880232dcbc00 ffff880232dcbc58 Call Trace: [<ffffffff8151b51d>] ? drm_vma_offset_remove+0x1d/0x110 [<ffffffff8152dc98>] radeon_get_vblank_timestamp_kms+0x38/0x60 [<ffffffff8152076a>] ? ttm_bo_release_list+0xba/0x180 [<ffffffff81503751>] drm_get_last_vbltimestamp+0x41/0x70 [<ffffffff81503933>] vblank_disable_and_save+0x73/0x1d0 [<ffffffff81106b2f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff81505245>] drm_vblank_cleanup+0x65/0xa0 [<ffffffff815604fa>] radeon_irq_kms_fini+0x1a/0x70 [<ffffffff8156c07e>] r100_init+0x26e/0x410 [<ffffffff8152ae3e>] radeon_device_init+0x7ae/0xb50 [<ffffffff8152d57f>] radeon_driver_load_kms+0x8f/0x210 [<ffffffff81506965>] drm_dev_register+0xb5/0x110 [<ffffffff8150998f>] drm_get_pci_dev+0x8f/0x200 [<ffffffff815291cd>] radeon_pci_probe+0xad/0xe0 [<ffffffff8141a365>] local_pci_probe+0x45/0xa0 [<ffffffff8141b741>] pci_device_probe+0xd1/0x130 [<ffffffff81633dad>] driver_probe_device+0x12d/0x3e0 [<ffffffff8163413b>] __driver_attach+0x9b/0xa0 [<ffffffff816340a0>] ? __device_attach+0x40/0x40 [<ffffffff81631cd3>] bus_for_each_dev+0x63/0xa0 [<ffffffff8163378e>] driver_attach+0x1e/0x20 [<ffffffff81633390>] bus_add_driver+0x180/0x240 [<ffffffff81634914>] driver_register+0x64/0xf0 [<ffffffff81419cac>] __pci_register_driver+0x4c/0x50 [<ffffffff81509bf5>] drm_pci_init+0xf5/0x120 [<ffffffff821dc871>] ? ttm_init+0x6a/0x6a [<ffffffff821dc908>] radeon_init+0x97/0xb5 [<ffffffff810002fc>] do_one_initcall+0xbc/0x1f0 [<ffffffff810e3278>] ? __wake_up+0x48/0x60 [<ffffffff8218e256>] kernel_init_freeable+0x18a/0x215 [<ffffffff8218d983>] ? initcall_blacklist+0xc0/0xc0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 [<ffffffff818a78fe>] kernel_init+0xe/0xf0 [<ffffffff818c0c3c>] ret_from_fork+0x7c/0xb0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 Code: 45 ac 0f 88 a8 01 00 00 3b b7 d0 01 00 00 49 89 ff 0f 83 99 01 00 00 48 8b 47 20 48 8b 80 88 00 00 00 48 85 c0 0f 84 cd 01 00 00 <41> 8b b1 5c 02 00 00 41 8b 89 58 02 00 00 89 75 98 41 8b b1 60 RIP [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP <ffff880234da7918> CR2: 000000000000025c ---[ end trace ad2c0aadf48e2032 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 It has helped me to add a NULL pointer check that was suggested at http://lists.freedesktop.org/archives/dri-devel/2014-October/070663.html I am not familiar with the code. But the change looks sane and we need something fast at this stage of 3.18 development. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16i2c: davinci: generate STP always when NACK is receivedGrygorii Strashko
commit 9ea359f7314132cbcb5a502d2d8ef095be1f45e4 upstream. According to I2C specification the NACK should be handled as follows: "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not Acknowledge signal. The master can then generate either a STOP condition to abort the transfer, or a repeated START condition to start a new transfer." [I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf] Currently the Davinci i2c driver interrupts the transfer on receipt of a NACK but fails to send a STOP in some situations and so makes the bus stuck until next I2C IP reset (idle/enable). For example, the issue will happen during SMBus read transfer which consists from two i2c messages write command/address and read data: S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P <--- write -----------------------> <--- read ---------------------> The I2C client device will send NACK if it can't recognize "Command Code" and it's expected from I2C master to generate STP in this case. But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will not be generated. Hence, fix it by generating Stop condition (STP) always when NACK is received. This patch fixes Davinci I2C in the same way it was done for OMAP I2C commit cda2109a26eb ("i2c: omap: query STP always when NACK is received"). Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by: Hein Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16i2c: omap: fix i207 errata handlingAlexander Kochetkov
commit ccfc866356674cb3a61829d239c685af6e85f197 upstream. commit 6d9939f651419a63e091105663821f9c7d3fec37 (i2c: omap: split out [XR]DR and [XR]RDY) changed the way how errata i207 (I2C: RDR Flag May Be Incorrectly Set) get handled. 6d9939f6514 code doesn't correspond to workaround provided by errata. According to errata ISR must filter out spurious RDR before data read not after. ISR must read RXSTAT to get number of bytes available to read. Because RDR could be set while there could no data in the receive FIFO. Restored pre 6d9939f6514 way of handling errata. Found by code review. Real impact haven't seen. Tested on Beagleboard XM C. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Fixes: 6d9939f651419a63e09110 i2c: omap: split out [XR]DR and [XR]RDY Tested-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16i2c: omap: fix NACK and Arbitration Lost irq handlingAlexander Kochetkov
commit 27caca9d2e01c92b26d0690f065aad093fea01c7 upstream. commit 1d7afc95946487945cc7f5019b41255b72224b70 (i2c: omap: ack IRQ in parts) changed the interrupt handler to complete transfers without clearing XRDY (AL case) and ARDY (NACK case) flags. XRDY or ARDY interrupts will be fired again. As a result, ISR keep processing transfer after it was already complete (from the driver code point of view). A didn't see real impacts of the 1d7afc9, but it is really bad idea to have ISR running on user data after transfer was complete. It looks, what 1d7afc9 violate TI specs in what how AL and NACK should be handled (see Note 1, sprugn4r, Figure 17-31 and Figure 17-32). According to specs (if I understood correctly), in case of NACK and AL driver must reset NACK, AL, ARDY, RDR, and RRDY (Master Receive Mode), and NACK, AL, ARDY, and XDR (Master Transmitter Mode). All that is done down the code under the if condition: if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) ... The patch restore pre 1d7afc9 logic of handling NACK and AL interrupts, so no interrupts is fired after ISR informs the rest of driver what transfer complete. Note: instead of removing break under NACK case, we could just replace 'break' with 'continue' and allow NACK transfer to finish using ARDY event. I found that NACK and ARDY bits usually set together. That case confirm TI wiki: http://processors.wiki.ti.com/index.php/I2C_Tips#Detecting_and_handling_NACK In order if someone interested in the event traces for NACK and AL cases, I sent them to mailing list. Tested on Beagleboard XM C. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Fixes: 1d7afc9 i2c: omap: ack IRQ in parts Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16xen-netfront: Remove BUGs on paged skb data which crosses a page boundarySeth Forshee
commit 8d609725d4357f499e2103e46011308b32f53513 upstream. These BUGs can be erroneously triggered by frags which refer to tail pages within a compound page. The data in these pages may overrun the hardware page while still being contained within the compound page, but since compound_order() evaluates to 0 for tail pages the assertion fails. The code already iterates through subsequent pages correctly in this scenario, so the BUGs are unnecessary and can be removed. Fixes: f36c374782e4 ("xen/netfront: handle compound page fragments on transmit") Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16mm: fix anon_vma_clone() error treatmentDaniel Forrest
commit c4ea95d7cd08d9ffd7fa75e6c5e0332d596dd11e upstream. Andrew Morton noticed that the error return from anon_vma_clone() was being dropped and replaced with -ENOMEM (which is not itself a bug because the only error return value from anon_vma_clone() is -ENOMEM). I did an audit of callers of anon_vma_clone() and discovered an actual bug where the error return was being lost. In __split_vma(), between Linux 3.11 and 3.12 the code was changed so the err variable is used before the call to anon_vma_clone() and the default initial value of -ENOMEM is overwritten. So a failure of anon_vma_clone() will return success since err at this point is now zero. Below is a patch which fixes this bug and also propagates the error return value from anon_vma_clone() in all cases. Fixes: ef0855d334e1 ("mm: mempolicy: turn vma_set_policy() into vma_dup_policy()") Signed-off-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tim Hartrick <tim@edgecast.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16mm: fix swapoff hang after page migration and forkHugh Dickins
commit 2022b4d18a491a578218ce7a4eca8666db895a73 upstream. I've been seeing swapoff hangs in recent testing: it's cycling around trying unsuccessfully to find an mm for some remaining pages of swap. I have been exercising swap and page migration more heavily recently, and now notice a long-standing error in copy_one_pte(): it's trying to add dst_mm to swapoff's mmlist when it finds a swap entry, but is doing so even when it's a migration entry or an hwpoison entry. Which wouldn't matter much, except it adds dst_mm next to src_mm, assuming src_mm is already on the mmlist: which may not be so. Then if pages are later swapped out from dst_mm, swapoff won't be able to find where to replace them. There's already a !non_swap_entry() test for stats: move that up before the swap_duplicate() and the addition to mmlist. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16mm/vmpressure.c: fix race in vmpressure_work_fn()Andrew Morton
commit 91b57191cfd152c02ded0745250167d0263084f8 upstream. In some android devices, there will be a "divide by zero" exception. vmpr->scanned could be zero before spin_lock(&vmpr->sr_lock). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=88051 [akpm@linux-foundation.org: neaten] Reported-by: ji_ang <ji_ang@163.com> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16mm: frontswap: invalidate expired data on a dup-store failureWeijie Yang
commit fb993fa1a2f669215fa03a09eed7848f2663e336 upstream. If a frontswap dup-store failed, it should invalidate the expired page in the backend, or it could trigger some data corruption issue. Such as: 1. use zswap as the frontswap backend with writeback feature 2. store a swap page(version_1) to entry A, success 3. dup-store a newer page(version_2) to the same entry A, fail 4. use __swap_writepage() write version_2 page to swapfile, success 5. zswap do shrink, writeback version_1 page to swapfile 6. version_2 page is overwrited by version_1, data corrupt. This patch fixes this issue by invalidating expired data immediately when meet a dup-store failure. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06Linux 3.14.26v3.14.26Greg Kroah-Hartman
2014-12-06nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_waitDavid Jeffery
commit 92a56555bd576c61b27a5cab9f38a33a1e9a1df5 upstream. If a SIGKILL is sent to a task waiting in __nfs_iocounter_wait, it will busy-wait or soft lockup in its while loop. nfs_wait_bit_killable won't sleep, and the loop won't exit on the error return. Stop the busy-wait by breaking out of the loop when nfs_wait_bit_killable returns an error. Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> [ kamal: backport to 3.13-stable: context ] Cc: Moritz Mühlenhoff <muehlenhoff@univention.de> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-onlyPaolo Bonzini
commit c1118b3602c2329671ad5ec8bdf8e374323d6343 upstream. On x86_64, kernel text mappings are mapped read-only with CONFIG_DEBUG_RODATA. In that case, KVM will fail to patch VMCALL instructions to VMMCALL as required on AMD processors. The failure mode is currently a divide-by-zero exception, which obviously is a KVM bug that has to be fixed. However, picking the right instruction between VMCALL and VMMCALL will be faster and will help if you cannot upgrade the hypervisor. Reported-by: Chris Webb <chris@arachsys.com> Tested-by: Chris Webb <chris@arachsys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06batman: fix a bogus warning from batadv_is_on_batman_iface()Cong Wang
commit b6ed5498601df40489606dbc14a9c7011c16630b upstream. batman tries to search dev->iflink to check if it's a batman interface, but ->iflink could be 0, which is not a valid ifindex. It should just avoid iflink == 0 case. Reported-by: Jet Chen <jet.chen@intel.com> Tested-by: Jet Chen <jet.chen@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Antonio Quartulli <antonio@open-mesh.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06powerpc/powernv: Honor the generic "no_64bit_msi" flagBenjamin Herrenschmidt
commit 360743814c4082515581aa23ab1d8e699e1fbe88 upstream. Instead of the arch specific quirk which we are deprecating and that drivers don't understand. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06locks: eliminate BUG() call when there's an unexpected lock on file closeJeff Layton
commit 8c3cac5e6a85f03602ffe09c44f14418699e31ec upstream. A leftover lock on the list is surely a sign of a problem of some sort, but it's not necessarily a reason to panic the box. Instead, just log a warning with some info about the lock, and then delete it like we would any other lock. In the event that the filesystem declares a ->lock f_op, we may end up leaking something, but that's generally preferable to an immediate panic. Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Markus Blank-Burian <burian@muenster.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06bitops: Fix shift overflow in GENMASK macrosMaxime COQUELIN
commit 00b4d9a14125f1e51874def2b9de6092e007412d upstream. On some 32 bits architectures, including x86, GENMASK(31, 0) returns 0 instead of the expected ~0UL. This is the same on some 64 bits architectures with GENMASK_ULL(63, 0). This is due to an overflow in the shift operand, 1 << 32 for GENMASK, 1 << 64 for GENMASK_ULL. Reported-by: Eric Paire <eric.paire@st.com> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux@rasmusvillemoes.dk Cc: gong.chen@linux.intel.com Cc: John Sullivan <jsrhbz@kanargh.force9.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Fixes: 10ef6b0dffe4 ("bitops: Introduce a more generic BITMASK macro") Link: http://lkml.kernel.org/r/1415267659-10563-1-git-send-email-maxime.coquelin@st.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06gpu/radeon: Set flag to indicate broken 64-bit MSIBenjamin Herrenschmidt
commit 91ed6fd2c383bb8f02d66e98b4a4d2f7207249dc upstream. Some radeon ASICs don't support all 64 address bits of MSIs despite advertising support for 64-bit MSIs in their configuration space. This breaks on systems such as IBM POWER7/8, where 64-bit MSIs can be assigned with some of the high address bits set. This makes use of the newly introduced "no_64bit_msi" flag in structure pci_dev to allow the MSI allocation code to fallback to 32-bit MSIs on those adapters. Adding Alex's review tag. Patch to the driver is identical to the reviewed one, I dropped the arch/powerpc hunk rewrote the subject and cset comment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06drm/radeon: fix endian swapping in vbios fetch for tdp tableAlex Deucher
commit 28731d5818ae25b92d1fb82fe0ac196e97102c1b upstream. Value needs to be swapped on BE. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06bnx2fc: do not add shared skbs to the fcoe_rx_listMaurizio Lombardi
commit 01a4cc4d0cd6a836c7b923760e8eb1cbb6a47258 upstream. In some cases, the fcoe_rx_list may contains multiple instances of the same skb (the so called "shared skbs"). the bnx2fc_l2_rcv thread is a loop that extracts a skb from the list, modifies (and destroys) its content and then proceed to the next one. The problem is that if the skb is shared, the remaining instances will be corrupted. The solution is to use skb_share_check() before adding the skb to the fcoe_rx_list. [ 6286.808725] ------------[ cut here ]------------ [ 6286.808729] WARNING: at include/scsi/fc_frame.h:173 bnx2fc_l2_rcv_thread+0x425/0x450 [bnx2fc]() [ 6286.808748] Modules linked in: bnx2x(-) mdio dm_service_time bnx2fc cnic uio fcoe libfcoe 8021q garp stp mrp libfc llc scsi_transport_fc scsi_tgt sg iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel e1000e ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper ptp cryptd hpilo serio_raw hpwdt lpc_ich pps_core ipmi_si pcspkr mfd_core ipmi_msghandler shpchp pcc_cpufreq mperf nfsd auth_rpcgss nfs_acl lockd sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit ata_piix drm_kms_helper ttm drm libata i2c_core hpsa dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mdio] [ 6286.808750] CPU: 3 PID: 1304 Comm: bnx2fc_l2_threa Not tainted 3.10.0-121.el7.x86_64 #1 [ 6286.808750] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 6286.808752] 0000000000000000 000000000b36e715 ffff8800deba1e00 ffffffff815ec0ba [ 6286.808753] ffff8800deba1e38 ffffffff8105dee1 ffffffffa05618c0 ffff8801e4c81888 [ 6286.808754] ffffe8ffff663868 ffff8801f402b180 ffff8801f56bc000 ffff8800deba1e48 [ 6286.808754] Call Trace: [ 6286.808759] [<ffffffff815ec0ba>] dump_stack+0x19/0x1b [ 6286.808762] [<ffffffff8105dee1>] warn_slowpath_common+0x61/0x80 [ 6286.808763] [<ffffffff8105e00a>] warn_slowpath_null+0x1a/0x20 [ 6286.808765] [<ffffffffa054f415>] bnx2fc_l2_rcv_thread+0x425/0x450 [bnx2fc] [ 6286.808767] [<ffffffffa054eff0>] ? bnx2fc_disable+0x90/0x90 [bnx2fc] [ 6286.808769] [<ffffffff81085aef>] kthread+0xcf/0xe0 [ 6286.808770] [<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140 [ 6286.808772] [<ffffffff815fc76c>] ret_from_fork+0x7c/0xb0 [ 6286.808773] [<ffffffff81085a20>] ? kthread_create_on_node+0x140/0x140 [ 6286.808774] ---[ end trace c6cdb939184ccb4e ]--- Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06net/ping: handle protocol mismatching scenarioJane Zhou
commit 91a0b603469069cdcce4d572b7525ffc9fd352a6 upstream. ping_lookup() may return a wrong sock if sk_buff's and sock's protocols dont' match. For example, sk_buff's protocol is ETH_P_IPV6, but sock's sk_family is AF_INET, in that case, if sk->sk_bound_dev_if is zero, a wrong sock will be returned. the fix is to "continue" the searching, if no matching, return NULL. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by: Jane Zhou <a17711@motorola.com> Signed-off-by: Yiwei Zhao <gbjc64@motorola.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06nfsd: don't halt scanning the DRC LRU list when there's an RC_INPROG entryJeff Layton
commit 1b19453d1c6abcfa7c312ba6c9f11a277568fc94 upstream. Currently, the DRC cache pruner will stop scanning the list when it hits an entry that is RC_INPROG. It's possible however for a call to take a *very* long time. In that case, we don't want it to block other entries from being pruned if they are expired or we need to trim the cache to get back under the limit. Fix the DRC cache pruner to just ignore RC_INPROG entries. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06nfsd: Fix slot wake up race in the nfsv4.1 callback codeTrond Myklebust
commit c6c15e1ed303ffc47e696ea1c9a9df1761c1f603 upstream. The currect code for nfsd41_cb_get_slot() and nfsd4_cb_done() has no locking in order to guarantee atomicity, and so allows for races of the form. Task 1 Task 2 ====== ====== if (test_and_set_bit(0) != 0) { clear_bit(0) rpc_wake_up_next(queue) rpc_sleep_on(queue) return false; } This patch breaks the race condition by adding a retest of the bit after the call to rpc_sleep_on(). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06nfsd: correctly define v4.2 support attributesChristoph Hellwig
commit 6d0ba0432a5e10bc714ba9c5adc460e726e5fbb4 upstream. Even when security labels are disabled we support at least the same attributes as v4.1. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06rt2x00: do not align payload on modern H/WStanislaw Gruszka
commit cfd9167af14eb4ec21517a32911d460083ee3d59 upstream. RT2800 and newer hardware require padding between header and payload if header length is not multiple of 4. For historical reasons we also align payload to to 4 bytes boundary, but such alignment is not needed on modern H/W. Patch fixes skb_under_panic problems reported from time to time: https://bugzilla.kernel.org/show_bug.cgi?id=84911 https://bugzilla.kernel.org/show_bug.cgi?id=72471 http://marc.info/?l=linux-wireless&m=139108549530402&w=2 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591 Panic happened because we eat 4 bytes of skb headroom on each (re)transmission when sending frame without the payload and the header length not being multiple of 4 (i.e. QoS header has 26 bytes). On such case because paylad_aling=2 is bigger than header_align=0 we increase header_align by 4 bytes. To prevent that we could change the check to: if (payload_length && payload_align > header_align) header_align += 4; but not aligning payload at all is more effective and alignment is not really needed by H/W (that has been tested on OpenWrt project for few years now). Reported-and-tested-by: Antti S. Lankila <alankila@bel.fi> Debugged-by: Antti S. Lankila <alankila@bel.fi> Reported-by: Henrik Asp <solenskiner@gmail.com> Originally-From: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-25 08:08:20 +0000