summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-10mac80211: fix locking in update_vlan_tailroom_need_count()Johannes Berg
[ Upstream commit 51f458d9612177f69c2e2c437034ae15f93078e7 ] Unfortunately, Michal's change to fix AP_VLAN crypto tailroom caused a locking issue that was reported by lockdep, but only in a few cases - the issue was a classic ABBA deadlock caused by taking the mtx after the key_mtx, where normally they're taken the other way around. As the key mutex protects the field in question (I'm adding a few annotations to make that clear) only the iteration needs to be protected, but we can also iterate the interface list with just RCU protection while holding the key mutex. Fixes: f9dca80b98ca ("mac80211: fix AP_VLAN crypto tailroom calculation") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10neigh: do not modify unlinked entriesJulian Anastasov
[ Upstream commit 2c51a97f76d20ebf1f50fef908b986cb051fdff9 ] The lockless lookups can return entry that is unlinked. Sometimes they get reference before last neigh_cleanup_and_release, sometimes they do not need reference. Later, any modification attempts may result in the following problems: 1. entry is not destroyed immediately because neigh_update can start the timer for dead entry, eg. on change to NUD_REACHABLE state. As result, entry lives for some time but is invisible and out of control. 2. __neigh_event_send can run in parallel with neigh_destroy while refcnt=0 but if timer is started and expired refcnt can reach 0 for second time leading to second neigh_destroy and possible crash. Thanks to Eric Dumazet and Ying Xue for their work and analyze on the __neigh_event_send change. Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Fixes: a263b3093641 ("ipv4: Make neigh lookups directly in output packet path.") Fixes: 6fd6ce2056de ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10packet: avoid out of bounds read in round robin fanoutWillem de Bruijn
[ Upstream commit 468479e6043c84f5a65299cc07cb08a22a28c2b1 ] PACKET_FANOUT_LB computes f->rr_cur such that it is modulo f->num_members. It returns the old value unconditionally, but f->num_members may have changed since the last store. Ensure that the return value is always < num. When modifying the logic, simplify it further by replacing the loop with an unconditional atomic increment. Fixes: dc99f600698d ("packet: Add fanout support.") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10packet: read num_members once in packet_rcv_fanout()Eric Dumazet
[ Upstream commit f98f4514d07871da7a113dd9e3e330743fd70ae4 ] We need to tell compiler it must not read f->num_members multiple times. Otherwise testing if num is not zero is flaky, and we could attempt an invalid divide by 0 in fanout_demux_cpu() Note bug was present in packet_rcv_fanout_hash() and packet_rcv_fanout_lb() but final 3.1 had a simple location after commit 95ec3eb417115fb ("packet: Add 'cpu' fanout policy.") Fixes: dc99f600698dc ("packet: Add fanout support.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10bridge: fix br_stp_set_bridge_priority race conditionsNikolay Aleksandrov
[ Upstream commit 2dab80a8b486f02222a69daca6859519e05781d9 ] After the ->set() spinlocks were removed br_stp_set_bridge_priority was left running without any protection when used via sysfs. It can race with port add/del and could result in use-after-free cases and corrupted lists. Tested by running port add/del in a loop with stp enabled while setting priority in a loop, crashes are easily reproducible. The spinlocks around sysfs ->set() were removed in commit: 14f98f258f19 ("bridge: range check STP parameters") There's also a race condition in the netlink priority support that is fixed by this change, but it was introduced recently and the fixes tag covers it, just in case it's needed the commit is: af615762e972 ("bridge: add ageing_time, stp_state, priority over netlink") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Fixes: 14f98f258f19 ("bridge: range check STP parameters") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10sctp: fix ASCONF list handlingMarcelo Ricardo Leitner
[ Upstream commit 2d45a02d0166caf2627fe91897c6ffc3b19514c4 ] ->auto_asconf_splist is per namespace and mangled by functions like sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization. Also, the call to inet_sk_copy_descendant() was backuping ->auto_asconf_list through the copy but was not honoring ->do_auto_asconf, which could lead to list corruption if it was different between both sockets. This commit thus fixes the list handling by using ->addr_wq_lock spinlock to protect the list. A special handling is done upon socket creation and destruction for that. Error handlig on sctp_init_sock() will never return an error after having initialized asconf, so sctp_destroy_sock() can be called without addrq_wq_lock. The lock now will be take on sctp_close_sock(), before locking the socket, so we don't do it in inverse order compared to sctp_addr_wq_timeout_handler(). Instead of taking the lock on sctp_sock_migrate() for copying and restoring the list values, it's preferred to avoid rewritting it by implementing sctp_copy_descendant(). Issue was found with a test application that kept flipping sysctl default_auto_asconf on and off, but one could trigger it by issuing simultaneous setsockopt() calls on multiple sockets or by creating/destroying sockets fast enough. This is only triggerable locally. Fixes: 9f7d653b67ae ("sctp: Add Auto-ASCONF support (core).") Reported-by: Ji Jianwen <jiji@redhat.com> Suggested-by: Neil Horman <nhorman@tuxdriver.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10can: fix loss of CAN frames in raw_rcvOliver Hartkopp
commit 36c01245eb8046c16eee6431e7dbfbb302635fa8 upstream. As reported by Manfred Schlaegl here http://marc.info/?l=linux-netdev&m=143482089824232&w=2 commit 514ac99c64b "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs. As net timestamping is influenced by several players (netstamp_needed and netdev_tstamp_prequeue) Manfred missed a proper timestamp which leads to CAN frame loss. As skb timestamping became now mandatory for CAN related skbs this patch makes sure that received CAN skbs always have a proper timestamp set. Maybe there's a better solution in the future but this patch fixes the CAN frame loss so far. Reported-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10KVM: nSVM: Check for NRIPS support before updating control fieldBandan Das
commit f104765b4f81fd74d69e0eb161e89096deade2db upstream. If hardware doesn't support DecodeAssist - a feature that provides more information about the intercept in the VMCB, KVM decodes the instruction and then updates the next_rip vmcb control field. However, NRIP support itself depends on cpuid Fn8000_000A_EDX[NRIPS]. Since skip_emulated_instruction() doesn't verify nrip support before accepting control.next_rip as valid, avoid writing this field if support isn't present. Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10ARM: clk-imx6q: refine sata's parentSebastien Szymanski
commit da946aeaeadcd24ff0cda9984c6fb8ed2bfd462a upstream. According to IMX6D/Q RM, table 18-3, sata clock's parent is ahb, not ipg. Signed-off-by: Sebastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> [dirk.behme: Adjust moved file] Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-10ARM: dts: sunxi: Adjust touchscreen compatible for sun5i and laterHans de Goede
commit 8bf1b9b3d90194a174493febc731f7783f2adf1a upstream. The touchscreen controller in the A13 and later has a different temperature curve than the one in the original A10, change the compatible for the A13 and later so that the kernel will use the correct curve. Reported-by: Tong Zhang <lovewilliam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29Linux 4.1.1v4.1.1Greg Kroah-Hartman
2015-06-29cdc-acm: Add support of ATOL FPrint fiscal printersAlexey Sokolov
commit 15bf722e6f6c0b884521a0363204532e849deb7f upstream. ATOL FPrint fiscal printers require usb_clear_halt to be executed to work properly. Add quirk to fix the issue. Signed-off-by: Alexey Sokolov <sokolov@7pikes.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29b43: fix support for 14e4:4321 PCI dev with BCM4321 chipsetRafał Miłecki
commit 90f91b129810c3f169e443252be30ed7c0130326 upstream. It seems Broadcom released two devices with conflicting device id. There are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they can be found in routers, e.g. Netgear WNR834Bv2. However, according to Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY). It's unsure if they meant PCI device id, or "virtual" id (from SPROM). To distinguish these devices lets check PHY type (G vs. N). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29ath3k: add support of 13d3:3474 AR3012 deviceDmitry Tunin
commit 0d0cef6183aec0fb6d0c9f00a09ff51ee086bbe2 upstream. BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29ath3k: Add support of 0489:e076 AR3012 deviceDmitry Tunin
commit 692c062e7c282164fd7cda68077f79dafd176eaf upstream. BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29Bluetooth: ath3k: Add support of 04ca:300d AR3012 deviceDmitry Tunin
commit 7e730c7f3d1f39c25cf5f7cf70c0ff4c28d7bec7 upstream. BugLink: https://bugs.launchpad.net/bugs/1394368 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=300d Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29perf tools: Fix build breakage if prefix= is specifiedLukas Wunner
commit 75e84ab906ef8935cff3df3d8929f1bafea81599 upstream. Invoking Makefile.perf with prefix= breaks the build since Makefile.perf hands that variable down to Makefile.build where it overrides prefix := $(subst ./,,$(OUTPUT)$(dir)/) leading to errors like this: No rule to make target '/usrabspath.o', needed by '/usrlibperf-in.o' Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Fixes: c819e2cf2eb6f65d3208d195d7a0edef6108d5 Link: http://lkml.kernel.org/r/5582c48a.84a22b0a.a918.5285SMTPIN_ADDED_MISSING@mx.google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29perf/x86: Honor the architectural performance monitoring versionPalik, Imre
commit 2c33645d366d13b969d936b68b9f4875b1fdddea upstream. Architectural performance monitoring, version 1, doesn't support fixed counters. Currently, even if a hypervisor advertises support for architectural performance monitoring version 1, perf may still try to use the fixed counters, as the constraints are set up based on the CPU model. This patch ensures that perf honors the architectural performance monitoring version returned by CPUID, and it only uses the fixed counters for version 2 and above. (Some of the ideas in this patch came from Peter Zijlstra.) Signed-off-by: Imre Palik <imrep@amazon.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Anthony Liguori <aliguori@amazon.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1433767609-1039-1-git-send-email-imrep.amz@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29perf/x86/intel/bts: Fix DS area sharing with x86_pmu eventsAlexander Shishkin
commit 6b099d9b040b0f3d0aec05b560d7caf879af5077 upstream. Currently, the intel_bts driver relies on the DS area allocated by the x86_pmu code in its event_init() path, which is a bug: creating a BTS event while no x86_pmu events are present results in a NULL pointer dereference. The same DS area is also used by PEBS sampling, which makes it quite a bit trickier to have a separate one for intel_bts' purposes. This patch makes intel_bts driver use the same DS allocation and reference counting code as x86_pmu to make sure it is always present when either intel_bts or x86_pmu need it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/1434024837-9916-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29perf/x86: Add more Broadwell model numbersAndi Kleen
commit 4b36f1a4139c9284df74c0f5d7655603d67807df upstream. This patch adds additional model numbers for Broadwell to perf. Support for Broadwell with Iris Pro (Intel Core i7-57xxC) and support for Broadwell Server Xeon. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1434055942-28253-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29perf: Fix ring_buffer_attach() RCU sync, againOleg Nesterov
commit 2f993cf093643b98477c421fa2b9a98dcc940323 upstream. While looking for other users of get_state/cond_sync. I Found ring_buffer_attach() and it looks obviously buggy? Don't we need to ensure that we have "synchronize" _between_ list_del() and list_add() ? IOW. Suppose that ring_buffer_attach() preempts right_after get_state_synchronize_rcu() and gp completes before spin_lock(). In this case cond_synchronize_rcu() does nothing and we reuse ->rb_entry without waiting for gp in between? It also moves the ->rcu_pending check under "if (rb)", to make it more readable imo. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: josh@joshtriplett.org Cc: tj@kernel.org Fixes: b69cf53640da ("perf: Fix a race between ring_buffer_detach() and ring_buffer_attach()") Link: http://lkml.kernel.org/r/20150530200425.GA15748@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29x86/boot: Fix overflow warning with 32-bit binutilsBorislav Petkov
commit 04c17341b42699a5859a8afa05e64ba08a4e5235 upstream. When building the kernel with 32-bit binutils built with support only for the i386 target, we get the following warning: arch/x86/kernel/head_32.S:66: Warning: shift count out of range (32 is not between 0 and 31) The problem is that in that case, binutils' internal type representation is 32-bit wide and the shift range overflows. In order to fix this, manipulate the shift expression which creates the 4GiB constant to not overflow the shift count. Suggested-by: Michael Matz <matz@suse.de> Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-21Linux 4.1v4.1Linus Torvalds
2015-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull scsi target fixes from Nicholas Bellinger: "Apologies for the late pull request. Here are the outstanding target-pending fixes for v4.1 code. The series contains three patches from Sagi + Co that address a few iser-target issues that have been uncovered during recent testing at Mellanox. Patch #1 has a v3.16+ stable tag, and #2-3 have v3.10+ stable tags" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iser-target: Fix possible use-after-free iser-target: release stale iser connections iser-target: Fix variable-length response error completion
2015-06-20Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "A smattering of fixes, mgag200: don't accept modes that aren't aligned properly as hw can't do it i915: two regression fixes radeon: one query to allow userspace fixes one oops fixer for older hw with new options enabled" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't probe MST on hw we don't support it on drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query drm/mgag200: Reject non-character-cell-aligned mode widths Revert "drm/i915: Don't skip request retirement if the active list is empty" drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
2015-06-19Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Michael Turquette: "Very late clk regression fixes for the ARM-based AT91 platform. These went unnoticed by me until recently, hence the late pull request" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: fix h32mx prototype inclusion in pmc header clk: at91: trivial: typo in peripheral clock description clk: at91: fix PERIPHERAL_MAX_SHIFT definition clk: at91: pll: fix input range validity check
2015-06-19Merge tag 'sound-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing looks scary, just a few usual HD-audio regression fixes and fixup, in addition to a minor Kconfig dependency fix for the old MIPS drivers" * tag 'sound-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix unused label skip_i915 ALSA: hda - Fix noisy outputs on Dell XPS13 (2015 model) ALSA: mips: let SND_SGI_O2 select SND_PCM ALSA: hda - Fix audio crackles on Dell Latitude E7x40 ALSA: hda - adding a DAC/pin preference map for a HP Envy TS machine
2015-06-19Merge branch 'ccf/atmel-fixes-for-4.1' of ↵Michael Turquette
https://github.com/bbrezillon/linux-at91 into clk-fixes
2015-06-19clk: at91: fix h32mx prototype inclusion in pmc headerNicolas Ferre
Trivial fix that prevents to compile this pmc clock driver if h32mx clock is present but smd clock isn't. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: bcc5fd49a0fd ("clk: at91: add a driver for the h32mx clock") Cc: <stable@vger.kernel.org> # 3.18+
2015-06-19clk: at91: trivial: typo in peripheral clock descriptionNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-06-19clk: at91: fix PERIPHERAL_MAX_SHIFT definitionBoris Brezillon
Fix the PERIPHERAL_MAX_SHIFT definition (3 instead of 4) and adapt the round_rate and set_rate logic accordingly. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: "Wu, Songjun" <Songjun.Wu@atmel.com>
2015-06-19clk: at91: pll: fix input range validity checkBoris Brezillon
The PLL impose a certain input range to work correctly, but it appears that this input range does not apply on the input clock (or parent clock) but on the input clock after it has passed the PLL divisor. Fix the implementation accordingly. Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Jonas Andersson <jonas@microbit.se>
2015-06-18Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c documentation fix from Wolfram Sang: "Here is a small documentation fix for I2C. We already had a user who unsuccessfully tried to get the new slave framework running with the currently broken example. So, before this happens again, I'd like to have this how-to-use section fixed for 4.1 already. So that no more hacking time is wasted" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: slave: fix the example how to instantiate from userspace
2015-06-18revert "cpumask: don't perform while loop in cpumask_next_and()"Andrew Morton
Revert commit 534b483a86e6 ("cpumask: don't perform while loop in cpumask_next_and()"). This was a minor optimization, but it puts a `struct cpumask' on the stack, which consumes too much stack space. Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-19Merge tag 'drm-intel-fixes-2015-06-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes one fix, one revert * tag 'drm-intel-fixes-2015-06-18' of git://anongit.freedesktop.org/drm-intel: Revert "drm/i915: Don't skip request retirement if the active list is empty" drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
2015-06-19Merge branch 'drm-fixes-4.1' of ↵Dave Airlie
git://people.freedesktop.org/~deathsimple/linux into drm-fixes two radeon fixes one MST fix, one query addition, destined for stable, and to fix a regression * 'drm-fixes-4.1' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: don't probe MST on hw we don't support it on drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query
2015-06-18drm/radeon: don't probe MST on hw we don't support it onDave Airlie
If you do radeon.mst=1 on a gpu without mst hw, and then plug some mst hw it will oops instead of falling back. So check we have DCE5 at least before proceeding. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2015-06-18drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING queryMichel Dänzer
This tells userspace that it's safe to use the RADEON_VA_UNMAP operation of the DRM_RADEON_GEM_VA ioctl. Cc: stable@vger.kernel.org (NOTE: Backporting this commit requires at least backports of commits 26d4d129b6042197b4cbc8341c0618f99231af2f, 48afbd70ac7b6aa62e8d452091023941d8085f8a and c29c0876ec05d51a93508a39b90b92c29ba6423d as well, otherwise using RADEON_VA_UNMAP runs into trouble) Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2015-06-17Merge tag 'trace-fix-filter-4.1-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing filter fix from Steven Rostedt: "Vince Weaver reported a warning when he added perf event filters into his fuzzer tests. There's a missing check of balanced operations when parenthesis are used, and this triggers a WARN_ON() and when reading the failure, the filter reports no failure occurred. The operands were not being checked if they match, this adds that" * tag 'trace-fix-filter-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have filter check for balanced ops
2015-06-17Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm bugfix from Marcelo Tosatti: "Rrestore APIC migration functionality" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix lapic.timer_mode on restore
2015-06-17Kconfig: disable Media Controller for DVBMauro Carvalho Chehab
Since when we start discussions about the usage Media Controller for complex hardware, one thing become clear: the way it is, MC fails to map anything different than capture/output/m2m video-only streaming. The point is that MC has entities named as devnodes, but the only devnode used (before the DVB patches) is MEDIA_ENT_T_DEVNODE_V4L. Due to the way MC got implemented, however, this entity actually doesn't represent the devnode, but the hardware I/O engine that receives data via DMA. By coincidence, such DMA is associated with the V4L device node on webcam hardware, but this is not true even for other V4L2 devices. For example, on USB hardware, the DMA is done via the USB controller. The data passes though a in-kernel filter that strips off the URB headers. Other V4L2 devices like radio may not even have DMA. When it have, the DMA is done via ALSA, and not via the V4L devnode. In other words, MC is broken as a whole, but tagging it as BROKEN right now would do more harm than good. So, instead, let's mark, for now, the DVB part as broken and block all new changes to MC while we fix this mess, whith we hopefully will do for the next Kernel version. Requested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Crash in caam hash due to uninitialised buffer lengths. - Alignment issue in caam RNG that may lead to non-random output" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix RNG buffer cache alignment crypto: caam - improve initalization for context state saves
2015-06-17mm: shmem_zero_setup skip security check and lockdep conflict with XFSHugh Dickins
It appears that, at some point last year, XFS made directory handling changes which bring it into lockdep conflict with shmem_zero_setup(): it is surprising that mmap() can clone an inode while holding mmap_sem, but that has been so for many years. Since those few lockdep traces that I've seen all implicated selinux, I'm hoping that we can use the __shmem_file_setup(,,,S_PRIVATE) which v3.13's commit c7277090927a ("security: shmem: implement kernel private shmem inodes") introduced to avoid LSM checks on kernel-internal inodes: the mmap("/dev/zero") cloned inode is indeed a kernel-internal detail. This also covers the !CONFIG_SHMEM use of ramfs to support /dev/zero (and MAP_SHARED|MAP_ANONYMOUS). I thought there were also drivers which cloned inode in mmap(), but if so, I cannot locate them now. Reported-and-tested-by: Prarit Bhargava <prarit@redhat.com> Reported-and-tested-by: Daniel Wagner <wagi@monom.org> Reported-and-tested-by: Morten Stevens <mstevens@fedoraproject.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-17i2c: slave: fix the example how to instantiate from userspaceWolfram Sang
I copied the wrong shell code into the documentation. Sorry to all who tried to get sense out of this current example :/ Slight rewording while we are here. Reported-by: Tim Bakker <bakkert@mymail.vcu.edu> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-06-17tracing: Have filter check for balanced opsSteven Rostedt
When the following filter is used it causes a warning to trigger: # cd /sys/kernel/debug/tracing # echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter -bash: echo: write error: Invalid argument # cat events/ext4/ext4_truncate_exit/filter ((dev==1)blocks==2) ^ parse_error: No error ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1223 at kernel/trace/trace_events_filter.c:1640 replace_preds+0x3c5/0x990() Modules linked in: bnep lockd grace bluetooth ... CPU: 3 PID: 1223 Comm: bash Tainted: G W 4.1.0-rc3-test+ #450 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 0000000000000668 ffff8800c106bc98 ffffffff816ed4f9 ffff88011ead0cf0 0000000000000000 ffff8800c106bcd8 ffffffff8107fb07 ffffffff8136b46c ffff8800c7d81d48 ffff8800d4c2bc00 ffff8800d4d4f920 00000000ffffffea Call Trace: [<ffffffff816ed4f9>] dump_stack+0x4c/0x6e [<ffffffff8107fb07>] warn_slowpath_common+0x97/0xe0 [<ffffffff8136b46c>] ? _kstrtoull+0x2c/0x80 [<ffffffff8107fb6a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81159065>] replace_preds+0x3c5/0x990 [<ffffffff811596b2>] create_filter+0x82/0xb0 [<ffffffff81159944>] apply_event_filter+0xd4/0x180 [<ffffffff81152bbf>] event_filter_write+0x8f/0x120 [<ffffffff811db2a8>] __vfs_write+0x28/0xe0 [<ffffffff811dda43>] ? __sb_start_write+0x53/0xf0 [<ffffffff812e51e0>] ? security_file_permission+0x30/0xc0 [<ffffffff811dc408>] vfs_write+0xb8/0x1b0 [<ffffffff811dc72f>] SyS_write+0x4f/0xb0 [<ffffffff816f5217>] system_call_fastpath+0x12/0x6a ---[ end trace e11028bd95818dcd ]--- Worse yet, reading the error message (the filter again) it says that there was no error, when there clearly was. The issue is that the code that checks the input does not check for balanced ops. That is, having an op between a closed parenthesis and the next token. This would only cause a warning, and fail out before doing any real harm, but it should still not caues a warning, and the error reported should work: # cd /sys/kernel/debug/tracing # echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter -bash: echo: write error: Invalid argument # cat events/ext4/ext4_truncate_exit/filter ((dev==1)blocks==2) ^ parse_error: Meaningless filter expression And give no kernel warning. Link: http://lkml.kernel.org/r/20150615175025.7e809215@gandalf.local.home Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: stable@vger.kernel.org # 2.6.31+ Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-06-16ALSA: hda - Fix unused label skip_i915Takashi Iwai
When CONFIG_SND_HDA_I915=n, we get a compile warning: sound/pci/hda/hda_intel.c: In function ‘azx_probe_continue’: sound/pci/hda/hda_intel.c:1882:2: warning: label ‘skip_i915’ defined but not used [-Wunused-label] Fix it by putting again ifdef to it. Sigh. Fixes: bf06848bdbe5 ('ALSA: hda - Continue probing even if i915 binding fails') Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-16crypto: caam - fix RNG buffer cache alignmentSteve Cornelius
The hwrng output buffers (2) are cast inside of a a struct (caam_rng_ctx) allocated in one DMA-tagged region. While the kernel's heap allocator should place the overall struct on a cacheline aligned boundary, the 2 buffers contained within may not necessarily align. Consenquently, the ends of unaligned buffers may not fully flush, and if so, stale data will be left behind, resulting in small repeating patterns. This fix aligns the buffers inside the struct. Note that not all of the data inside caam_rng_ctx necessarily needs to be DMA-tagged, only the buffers themselves require this. However, a fix would incur the expense of error-handling bloat in the case of allocation failure. Cc: stable@vger.kernel.org Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-16crypto: caam - improve initalization for context state savesSteve Cornelius
Multiple function in asynchronous hashing use a saved-state block, a.k.a. struct caam_hash_state, which holds a stash of information between requests (init/update/final). Certain values in this state block are loaded for processing using an inline-if, and when this is done, the potential for uninitialized data can pose conflicts. Therefore, this patch improves initialization of state data to prevent false assignments using uninitialized data in the state block. This patch addresses the following traceback, originating in ahash_final_ctx(), although a problem like this could certainly exhibit other symptoms: kernel BUG at arch/arm/mm/dma-mapping.c:465! Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01752-gdd441b9-dirty #40) PC is at __bug+0x1c/0x28 LR is at __bug+0x18/0x28 pc : [<80043240>] lr : [<8004323c>] psr: 60000013 sp : e423fd98 ip : 60000013 fp : 0000001c r10: e4191b84 r9 : 00000020 r8 : 00000009 r7 : 88005038 r6 : 00000001 r5 : 2d676572 r4 : e4191a60 r3 : 00000000 r2 : 00000001 r1 : 60000093 r0 : 00000033 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 1000404a DAC: 00000015 Process cryptomgr_test (pid: 1306, stack limit = 0xe423e2f0) Stack: (0xe423fd98 to 0xe4240000) fd80: 11807fd1 80048544 fda0: 88005000 e4191a00 e5178040 8039dda0 00000000 00000014 2d676572 e4191008 fdc0: 88005018 e4191a60 00100100 e4191a00 00000000 8039ce0c e423fea8 00000007 fde0: e4191a00 e4227000 e5178000 8039ce18 e419183c 80203808 80a94a44 00000006 fe00: 00000000 80207180 00000000 00000006 e423ff08 00000000 00000007 e5178000 fe20: e41918a4 80a949b4 8c4844e2 00000000 00000049 74227000 8c4844e2 00000e90 fe40: 0000000e 74227e90 ffff8c58 80ac29e0 e423fed4 8006a350 8c81625c e423ff5c fe60: 00008576 e4002500 00000003 00030010 e4002500 00000003 e5180000 e4002500 fe80: e5178000 800e6d24 007fffff 00000000 00000010 e4001280 e4002500 60000013 fea0: 000000d0 804df078 00000000 00000000 00000000 00000000 00000000 00000000 fec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 e4227000 e4226000 e4753000 e4752000 e40a5000 e40a4000 ff00: e41e7000 e41e6000 00000000 00000000 00000000 e423ff14 e423ff14 00000000 ff20: 00000400 804f9080 e5178000 e4db0b40 00000000 e4db0b80 0000047c 00000400 ff40: 00000000 8020758c 00000400 ffffffff 0000008a 00000000 e4db0b40 80206e00 ff60: e4049dbc 00000000 00000000 00000003 e423ffa4 80062978 e41a8bfc 00000000 ff80: 00000000 e4049db4 00000013 e4049db0 00000013 00000000 00000000 00000000 ffa0: e4db0b40 e4db0b40 80204cbc 00000013 00000000 00000000 00000000 80204cfc ffc0: e4049da0 80089544 80040a40 00000000 e4db0b40 00000000 00000000 00000000 ffe0: e423ffe0 e423ffe0 e4049da0 800894c4 80040a40 80040a40 00000000 00000000 [<80043240>] (__bug+0x1c/0x28) from [<80048544>] (___dma_single_dev_to_cpu+0x84) [<80048544>] (___dma_single_dev_to_cpu+0x84/0x94) from [<8039dda0>] (ahash_fina) [<8039dda0>] (ahash_final_ctx+0x180/0x428) from [<8039ce18>] (ahash_final+0xc/0) [<8039ce18>] (ahash_final+0xc/0x10) from [<80203808>] (crypto_ahash_op+0x28/0xc) [<80203808>] (crypto_ahash_op+0x28/0xc0) from [<80207180>] (test_hash+0x214/0x5) [<80207180>] (test_hash+0x214/0x5b8) from [<8020758c>] (alg_test_hash+0x68/0x8c) [<8020758c>] (alg_test_hash+0x68/0x8c) from [<80206e00>] (alg_test+0x7c/0x1b8) [<80206e00>] (alg_test+0x7c/0x1b8) from [<80204cfc>] (cryptomgr_test+0x40/0x48) [<80204cfc>] (cryptomgr_test+0x40/0x48) from [<80089544>] (kthread+0x80/0x88) [<80089544>] (kthread+0x80/0x88) from [<80040a40>] (kernel_thread_exit+0x0/0x8) Code: e59f0010 e1a01003 eb126a8d e3a03000 (e5833000) ---[ end trace d52a403a1d1eaa86 ]--- Cc: stable@vger.kernel.org Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-16KVM: x86: fix lapic.timer_mode on restoreRadim Krčmář
lapic.timer_mode was not properly initialized after migration, which broke few useful things, like login, by making every sleep eternal. Fix this by calling apic_update_lvtt in kvm_apic_post_state_restore. There are other slowpaths that update lvtt, so this patch makes sure something similar doesn't happen again by calling apic_update_lvtt after every modification. Cc: stable@vger.kernel.org Fixes: f30ebc312ca9 ("KVM: x86: optimize some accesses to LVTT and SPIV") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2015-06-16drm/mgag200: Reject non-character-cell-aligned mode widthsAdam Jackson
Turns out 1366x768 does not in fact work on this hardware. Signed-off-by: Adam Jackson <ajax@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-12 09:19:19 +0000