summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-07-27vfio: New external user group/file matchAlex Williamson
commit 5d6dee80a1e94cc284d03e06d930e60e8d3ecf7d upstream. At the point where the kvm-vfio pseudo device wants to release its vfio group reference, we can't always acquire a new reference to make that happen. The group can be in a state where we wouldn't allow a new reference to be added. This new helper function allows a caller to match a file to a group to facilitate this. Given a file and group, report if they match. Thus the caller needs to already have a group reference to match to the file. This allows the deletion of a group without acquiring a new reference. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27vfio: Fix group release deadlockAlex Williamson
commit 811642d8d8a82c0cce8dc2debfdaf23c5a144839 upstream. If vfio_iommu_group_notifier() acquires a group reference and that reference becomes the last reference to the group, then vfio_group_put introduces a deadlock code path where we're trying to unregister from the iommu notifier chain from within a callout of that chain. Use a work_struct to release this reference asynchronously. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ovl: drop CAP_SYS_RESOURCE from saved mounter's credentialsKonstantin Khlebnikov
commit 51f8f3c4e22535933ef9aecc00e9a6069e051b57 upstream. If overlay was mounted by root then quota set for upper layer does not work because overlay now always use mounter's credentials for operations. Also overlay might deplete reserved space and inodes in ext4. This patch drops capability SYS_RESOURCE from saved credentials. This affects creation new files, whiteouts, and copy-up operations. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 1175b6b8d963 ("ovl: do operations on underlying file system in mounter's context") Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/ttm: Fix use-after-free in ttm_bo_clean_mmJohn Brooks
commit 8046e1955465e3f24e9154d0f2a2e0a8e3f8dccf upstream. We unref the man->move fence in ttm_bo_clean_mm() and then call ttm_bo_force_list_clean() which waits on it, except the refcount is now zero so a warning is generated (or worse): [149492.279301] refcount_t: increment on 0; use-after-free. [149492.279309] ------------[ cut here ]------------ [149492.279315] WARNING: CPU: 3 PID: 18726 at lib/refcount.c:150 refcount_inc+0x2b/0x30 [149492.279315] Modules linked in: vhost_net vhost tun x86_pkg_temp_thermal crc32_pclmul ghash_clmulni_intel efivarfs amdgpu( -) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm [149492.279326] CPU: 3 PID: 18726 Comm: rmmod Not tainted 4.12.0-rc5-drm-next-4.13-ttmpatch+ #1 [149492.279326] Hardware name: Gigabyte Technology Co., Ltd. Z97X-UD3H-BK/Z97X-UD3H-BK-CF, BIOS F6 06/17/2014 [149492.279327] task: ffff8804ddfedcc0 task.stack: ffffc90008d20000 [149492.279329] RIP: 0010:refcount_inc+0x2b/0x30 [149492.279330] RSP: 0018:ffffc90008d23c30 EFLAGS: 00010286 [149492.279331] RAX: 000000000000002b RBX: 0000000000000170 RCX: 0000000000000000 [149492.279331] RDX: 0000000000000000 RSI: ffff88051ecccbe8 RDI: ffff88051ecccbe8 [149492.279332] RBP: ffffc90008d23c30 R08: 0000000000000001 R09: 00000000000003ee [149492.279333] R10: ffffc90008d23bb0 R11: 00000000000003ee R12: ffff88043aaac960 [149492.279333] R13: ffff8805005e28a8 R14: 0000000000000002 R15: ffff88050115e178 [149492.279334] FS: 00007fc540168700(0000) GS:ffff88051ecc0000(0000) knlGS:0000000000000000 [149492.279335] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [149492.279336] CR2: 00007fc3e8654140 CR3: 000000027ba77000 CR4: 00000000001426e0 [149492.279337] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [149492.279337] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [149492.279338] Call Trace: [149492.279345] ttm_bo_force_list_clean+0xb9/0x110 [ttm] [149492.279348] ttm_bo_clean_mm+0x7a/0xe0 [ttm] [149492.279375] amdgpu_ttm_fini+0xc9/0x1f0 [amdgpu] [149492.279392] amdgpu_bo_fini+0x12/0x40 [amdgpu] [149492.279415] gmc_v7_0_sw_fini+0x32/0x40 [amdgpu] [149492.279430] amdgpu_fini+0x2c9/0x490 [amdgpu] [149492.279445] amdgpu_device_fini+0x58/0x1b0 [amdgpu] [149492.279461] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [149492.279470] drm_dev_unregister+0x3c/0xe0 [drm] [149492.279485] amdgpu_pci_remove+0x19/0x30 [amdgpu] [149492.279487] pci_device_remove+0x39/0xc0 [149492.279490] device_release_driver_internal+0x155/0x210 [149492.279491] driver_detach+0x38/0x70 [149492.279493] bus_remove_driver+0x4c/0xa0 [149492.279494] driver_unregister+0x2c/0x40 [149492.279496] pci_unregister_driver+0x21/0x90 [149492.279520] amdgpu_exit+0x15/0x406 [amdgpu] [149492.279523] SyS_delete_module+0x1a8/0x270 [149492.279525] ? exit_to_usermode_loop+0x92/0xa0 [149492.279528] entry_SYSCALL_64_fastpath+0x13/0x94 [149492.279529] RIP: 0033:0x7fc53fcb68e7 [149492.279529] RSP: 002b:00007ffcfbfaabb8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [149492.279531] RAX: ffffffffffffffda RBX: 0000563117adb200 RCX: 00007fc53fcb68e7 [149492.279531] RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000563117adb268 [149492.279532] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [149492.279533] R10: 0000000000000883 R11: 0000000000000206 R12: 00007ffcfbfa9ba0 [149492.279533] R13: 0000000000000000 R14: 0000000000000000 R15: 0000563117adb200 [149492.279534] Code: 55 48 89 e5 e8 77 fe ff ff 84 c0 74 02 5d c3 80 3d 40 f2 a4 00 00 75 f5 48 c7 c7 20 3c ca 81 c6 05 30 f2 a4 00 01 e8 91 f0 d7 ff <0f> ff 5d c3 90 55 48 89 fe bf 01 00 00 00 48 89 e5 e8 9f fe ff [149492.279557] ---[ end trace 2d4e0ffcb66a1016 ]--- Unref the fence *after* waiting for it. v2: Set man->move to NULL after dropping the last ref (Christian König) Fixes: aff98ba1fdb8 (drm/ttm: wait for eviction in ttm_bo_force_list_clean) Signed-off-by: John Brooks <john@fastquake.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27f2fs: Don't clear SGID when inheriting ACLsJaegeuk Kim
commit c925dc162f770578ff4a65ec9b08270382dba9e6 upstream. This patch copies commit b7f8a09f80: "btrfs: Don't clear SGID when inheriting ACLs" written by Jan. Fixes: 073931017b49d9458aa351605b43a7e34598caef Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27f2fs: sanity check size of nat and sit cacheJin Qian
commit 21d3f8e1c3b7996ce239ab6fa82e9f7a8c47d84d upstream. Make sure number of entires doesn't exceed max journal size. Signed-off-by: Jin Qian <jinqian@android.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27xfs: Don't clear SGID when inheriting ACLsJan Kara
commit 8ba358756aa08414fa9e65a1a41d28304ed6fd7f upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by calling __xfs_set_acl() instead of xfs_set_acl() when setting up inode in xfs_generic_create(). That prevents SGID bit clearing and mode is properly set by posix_acl_create() anyway. We also reorder arguments of __xfs_set_acl() to match the ordering of xfs_set_acl() to make things consistent. Fixes: 073931017b49d9458aa351605b43a7e34598caef CC: Darrick J. Wong <darrick.wong@oracle.com> CC: linux-xfs@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ipmi:ssif: Add missing unlock in error branchCorey Minyard
commit 4495ec6d770e1bca7a04e93ac453ab6720c56c5d upstream. When getting flags, a response to a different message would result in a deadlock because of a missing unlock. Add that unlock and a comment. Found by static analysis. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ipmi: use rcu lock around call to intf->handlers->sender()Tony Camuso
commit cdea46566bb21ce309725a024208322a409055cc upstream. A vendor with a system having more than 128 CPUs occasionally encounters the following crash during shutdown. This is not an easily reproduceable event, but the vendor was able to provide the following analysis of the crash, which exhibits the same footprint each time. crash> bt PID: 0 TASK: ffff88017c70ce70 CPU: 5 COMMAND: "swapper/5" #0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b #1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2 #2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0 #3 [ffff88085c143c10] oops_end at ffffffff8168ef88 #4 [ffff88085c143c38] no_context at ffffffff8167ebb3 #5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49 #6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3 #7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e #8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5 #9 [ffff88085c143d70] page_fault at ffffffff8168e188 [exception RIP: unknown or invalid address] RIP: ffffffffa053c800 RSP: ffff88085c143e28 RFLAGS: 00010206 RAX: ffff88017c72bfd8 RBX: ffff88017a8dc000 RCX: ffff8810588b5ac8 RDX: ffff8810588b5a00 RSI: ffffffffa053c800 RDI: ffff8810588b5a00 RBP: ffff88085c143e58 R8: ffff88017c70d408 R9: ffff88017a8dc000 R10: 0000000000000002 R11: ffff88085c143da0 R12: ffff8810588b5ac8 R13: 0000000000000100 R14: ffffffffa053c800 R15: ffff8810588b5a00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <IRQ stack> [exception RIP: cpuidle_enter_state+82] RIP: ffffffff81514192 RSP: ffff88017c72be50 RFLAGS: 00000202 RAX: 0000001e4c3c6f16 RBX: 000000000000f8a0 RCX: 0000000000000018 RDX: 0000000225c17d03 RSI: ffff88017c72bfd8 RDI: 0000001e4c3c6f16 RBP: ffff88017c72be78 R8: 000000000000237e R9: 0000000000000018 R10: 0000000000002494 R11: 0000000000000001 R12: ffff88017c72be20 R13: ffff88085c14f8e0 R14: 0000000000000082 R15: 0000001e4c3bb400 ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018 This is the corresponding stack trace It has crashed because the area pointed with RIP extracted from timer element is already removed during a shutdown process. The function is smi_timeout(). And we think ffff8810588b5a00 in RDX is a parameter struct smi_info crash> rd ffff8810588b5a00 20 ffff8810588b5a00: ffff8810588b6000 0000000000000000 .`.X............ ffff8810588b5a10: ffff880853264400 ffffffffa05417e0 .D&S......T..... ffff8810588b5a20: 24a024a000000000 0000000000000000 .....$.$........ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a40: ffffffffa053a040 ffffffffa053a060 @.S.....`.S..... ffff8810588b5a50: 0000000000000000 0000000100000001 ................ ffff8810588b5a60: 0000000000000000 0000000000000e00 ................ ffff8810588b5a70: ffffffffa053a580 ffffffffa053a6e0 ..S.......S..... ffff8810588b5a80: ffffffffa053a4a0 ffffffffa053a250 ..S.....P.S..... ffff8810588b5a90: 0000000500000002 0000000000000000 ................ Unfortunately the top of this area is already detroyed by someone. But because of two reasonns we think this is struct smi_info 1) The address included in between ffff8810588b5a70 and ffff8810588b5a80: are inside of ipmi_si_intf.c see crash> module ffff88085779d2c0 2) We've found the area which point this. It is offset 0x68 of ffff880859df4000 crash> rd ffff880859df4000 100 ffff880859df4000: 0000000000000000 0000000000000001 ................ ffff880859df4010: ffffffffa0535290 dead000000000200 .RS............. ffff880859df4020: ffff880859df4020 ffff880859df4020 @.Y.... @.Y.... ffff880859df4030: 0000000000000002 0000000000100010 ................ ffff880859df4040: ffff880859df4040 ffff880859df4040 @@.Y....@@.Y.... ffff880859df4050: 0000000000000000 0000000000000000 ................ ffff880859df4060: 0000000000000000 ffff8810588b5a00 .........Z.X.... ffff880859df4070: 0000000000000001 ffff880859df4078 ........x@.Y.... If we regards it as struct ipmi_smi in shutdown process it looks consistent. The remedy for this apparent race is affixed below. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> This was first introduced in 7ea0ed2b5be817 ipmi: Make the message handler easier to use for SMI interfaces where some code was moved outside of the rcu_read_lock() and the lock was not added. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-07-27drm/radeon: Fix eDP for single-display iMac10,1 (v2)Mario Kleiner
commit 564d8a2cf3abf16575af48bdc3e86e92ee8a617d upstream. The late 2009, 27 inch Apple iMac10,1 has an internal eDP display and an external Mini- Displayport output, driven by a DCE-3.2, RV730 Radeon Mobility HD-4670. The machine worked fine in a dual-display setup with eDP panel + externally connected HDMI or DVI-D digital display sink, connected via MiniDP to DVI or HDMI adapter. However, booting the machine single-display with only eDP panel results in a completely black display - even backlight powering off, as soon as the radeon modesetting driver loads. This patch fixes the single dispay eDP case by assigning encoders based on dig->linkb, similar to DCE-4+. While this should not be generally necessary (Alex: "...atom on normal boards should be able to handle any mapping."), Apple seems to use some special routing here. One remaining problem not solved by this patch is that an external Minidisplayport->DP sink does still not work on iMac10,1, whereas external DVI and HDMI sinks continue to work. The problem affects at least all tested kernels since Linux 3.13 - didn't test earlier kernels, so backporting to stable probably makes sense. v2: With the original patch from 2016, Alex was worried it will break other DCE3.2 systems. Use dmi_match() to apply this special encoder assignment only for the Apple iMac 10,1 from late 2009. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/radeon/ci: disable mclk switching for high refresh rates (v2)Alex Deucher
commit ab03d9fe508f4e2914a8f4a9eef1b21051cacd0f upstream. Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27drm/amd/amdgpu: Return error if initiating read out of range on vramTom St Denis
commit 9156e723301c0a7a7def4cde820e018ce791b842 upstream. If you initiate a read that is out of the VRAM address space return ENXIO instead of 0. Reads that begin below that point will read upto the VRAM limit as before. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27s390/syscalls: Fix out of bounds arguments accessJiri Olsa
commit c46fc0424ced3fb71208e72bd597d91b9169a781 upstream. Zorro reported following crash while having enabled syscall tracing (CONFIG_FTRACE_SYSCALLS): Unable to handle kernel pointer dereference at virtual ... Oops: 0011 [#1] SMP DEBUG_PAGEALLOC SNIP Call Trace: ([<000000000024d79c>] ftrace_syscall_enter+0xec/0x1d8) [<00000000001099c6>] do_syscall_trace_enter+0x236/0x2f8 [<0000000000730f1c>] sysc_tracesys+0x1a/0x32 [<000003fffcf946a2>] 0x3fffcf946a2 INFO: lockdep is turned off. Last Breaking-Event-Address: [<000000000022dd44>] rb_event_data+0x34/0x40 ---[ end trace 8c795f86b1b3f7b9 ]--- The crash happens in syscall_get_arguments function for syscalls with zero arguments, that will try to access first argument (args[0]) in event entry, but it's not allocated. Bail out of there are no arguments. Reported-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27Raid5 should update rdev->sectors after reshapeXiao Ni
commit b5d27718f38843a74552e9a93d32e2391fd3999f upstream. The raid5 md device is created by the disks which we don't use the total size. For example, the size of the device is 5G and it just uses 3G of the devices to create one raid5 device. Then change the chunksize and wait reshape to finish. After reshape finishing stop the raid and assemble it again. It fails. mdadm -CR /dev/md0 -l5 -n3 /dev/loop[0-2] --size=3G --chunk=32 --assume-clean mdadm /dev/md0 --grow --chunk=64 wait reshape to finish mdadm -S /dev/md0 mdadm -As The error messages: [197519.814302] md: loop1 does not have a valid v1.2 superblock, not importing! [197519.821686] md: md_import_device returned -22 After reshape the data offset is changed. It selects backwards direction in this condition. In function super_1_load it compares the available space of the underlying device with sb->data_size. The new data offset gets bigger after reshape. So super_1_load returns -EINVAL. rdev->sectors is updated in md_finish_reshape. Then sb->data_size is set in super_1_sync based on rdev->sectors. So add md_finish_reshape in end_reshape. Signed-off-by: Xiao Ni <xni@redhat.com> Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ext2: Don't clear SGID when inheriting ACLsJan Kara
commit a992f2d38e4ce17b8c7d1f7f67b2de0eebdea069 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by creating __ext2_set_acl() function that does not call posix_acl_update_mode() and use it when inheriting ACLs. That prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 073931017b49d9458aa351605b43a7e34598caef CC: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27libnvdimm: fix badblock range handling of ARS rangeToshi Kani
commit 4e3f0701f25ab194c5362576b1146a1e6cc6c2e7 upstream. __add_badblock_range() does not account sector alignment when it sets 'num_sectors'. Therefore, an ARS error record range spanning across two sectors is set to a single sector length, which leaves the 2nd sector unprotected. Change __add_badblock_range() to set 'num_sectors' properly. Fixes: 0caeef63e6d2 ("libnvdimm: Add a poison list and export badblocks") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27libnvdimm, btt: fix btt_rw_page not returning errorsVishal Verma
commit c13c43d54f2c6a3be1c675766778ac1ad8dfbfcc upstream. btt_rw_page was not propagating errors frm btt_do_bvec, resulting in any IO errors via the rw_page path going unnoticed. the pmem driver recently fixed this in e10624f pmem: fail io-requests to known bad blocks but same problem in BTT went neglected. Fixes: 5212e11fde4d ("nd_btt: atomic sector updates") Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27cx88: Fix regression in initial video standard settingDevin Heitmueller
commit 4e0973a918b9a42e217093f078e04a61e5dd95a5 upstream. Setting initial standard at the top of cx8800_initdev would cause the first call to cx88_set_tvnorm() to return without programming any registers (leaving the driver saying it's set to NTSC but the hardware isn't programmed). Even worse, any subsequent attempt to explicitly set it to NTSC-M will return success but actually fail to program the underlying registers unless first changing the standard to something other than NTSC-M. Set the initial standard later in the process, and make sure the field is zero at the beginning to ensure that the call always goes through. This regression was introduced in the following commit: commit ccd6f1d488e7 ("[media] cx88: move width, height and field to core struct") Author: Hans Verkuil <hans.verkuil@cisco.com> [media] cx88: move width, height and field to core struct Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27x86/xen: allow userspace access during hypercallsMarek Marczykowski-Górecki
commit c54590cac51db8ab5fd30156bdaba34af915e629 upstream. Userspace application can do a hypercall through /dev/xen/privcmd, and some for some hypercalls argument is a pointers to user-provided structure. When SMAP is supported and enabled, hypervisor can't access. So, lets allow it. The same applies to HYPERVISOR_dm_op, where additionally privcmd driver carefully verify buffer addresses. Cc: stable@vger.kernel.org Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> [HYPERVISOR_dm_op dropped - not present until 4.11] Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27md: don't use flush_signals in userspace processesMikulas Patocka
commit f9c79bc05a2a91f4fba8bfd653579e066714b1ec upstream. The function flush_signals clears all pending signals for the process. It may be used by kernel threads when we need to prepare a kernel thread for responding to signals. However using this function for an userspaces processes is incorrect - clearing signals without the program expecting it can cause misbehavior. The raid1 and raid5 code uses flush_signals in its request routine because it wants to prepare for an interruptible wait. This patch drops flush_signals and uses sigprocmask instead to block all signals (including SIGKILL) around the schedule() call. The signals are not lost, but the schedule() call won't respond to them. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27usb: renesas_usbhs: gadget: disable all eps when the driver stopsYoshihiro Shimoda
commit b8b9c974afee685789fcbb191b52d1790be3608c upstream. A gadget driver will not disable eps immediately when ->disconnect() is called. But, since this driver assumes all eps stop after the ->disconnect(), unexpected behavior happens (especially in system suspend). So, this patch disables all eps in usbhsg_try_stop(). After disabling eps by renesas_usbhs driver, since some functions will be called by both a gadget and renesas_usbhs driver, renesas_usbhs driver should protect uep->pipe. To protect uep->pipe easily, this patch adds a new lock in struct usbhsg_uep. Fixes: 2f98382dc ("usb: renesas_usbhs: Add Renesas USBHS Gadget") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRLYoshihiro Shimoda
commit 59a0879a0e17b2e43ecdc5e3299da85b8410d7ce upstream. This patch fixes an issue that some registers may be not initialized after resume if the USBHSF_RUNTIME_PWCTRL is not set. Otherwise, if a cable is not connected, the driver will not enable INTENB0.VBSE after resume. And then, the driver cannot detect the VBUS. Fixes: ca8a282a5373 ("usb: gadget: renesas_usbhs: add suspend/resume support") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27USB: cdc-acm: add device-id for quirky printerJohan Hovold
commit fe855789d605590e57f9cd968d85ecce46f5c3fd upstream. Add device-id entry for DATECS FP-2000 fiscal printer needing the NO_UNION_NORMAL quirk. Reported-by: Anton Avramov <lukav@lukav.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27usb: storage: return on error to avoid a null pointer dereferenceColin Ian King
commit 446230f52a5bef593554510302465eabab45a372 upstream. When us->extra is null the driver is not initialized, however, a later call to osd200_scsi_to_ata is made that dereferences us->extra, causing a null pointer dereference. The code currently detects and reports that the driver is not initialized; add a return to avoid the subsequent dereference issue in this check. Thanks to Alan Stern for pointing out that srb->result needs setting to DID_ERROR << 16 Detected by CoverityScan, CID#100308 ("Dereference after null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27mxl111sf: Fix driver to use heap allocate buffers for USB messagesDevin Heitmueller
commit d90b336f3f652ff0441e631a06236f785581c8f7 upstream. The recent changes in 4.9 to mandate USB buffers be heap allocated broke this driver, which was allocating the buffers on the stack. This resulted in the device failing at initialization. Introduce dedicated send/receive buffers as part of the state structure, and add a mutex to protect access to them. Note: we also had to tweak the API to mxl111sf_ctrl_msg to pass the pointer to the state struct rather than the device, since we need it inside the function to access the buffers and the mutex. This patch adjusts the callers to match the API change. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Reported-by: Doug Lung <dlung0@gmail.com> Cc: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27xhci: Bad Ethernet performance plugged in ASM1042A hostJiahau Chang
commit 9da5a1092b13468839b1a864b126cacfb72ad016 upstream. When USB Ethernet is plugged in ASMEDIA ASM1042A xHCI host, bad performance was manifesting in Web browser use (like download large file such as ISO image). It is known limitation of ASM1042A that is not compatible with driver scheduling, As a workaround we can modify flow control handling of ASM1042A. The register we modify is changes the behavior [use quirk bit 28, usleep_range 40-60us, empty non-pci function -Mathias] Signed-off-by: Jiahau Chang <Lars_chang@asmedia.com.tw> Signed-off-by: Ian Pilcher <arequipeno@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27xhci: Fix NULL pointer dereference when cleaning up streams for removed hostMathias Nyman
commit 4b895868bb2da60a386a17cde3bf9ecbc70c79f4 upstream. This off by one in stream_id indexing caused NULL pointer dereference and soft lockup on machines with USB attached SCSI devices connected to a hotpluggable xhci controller. The code that cleans up pending URBs for dead hosts tried to dereference a stream ring at the invalid stream_id 0. ep->stream_info->stream_rings[0] doesn't point to a ring. Start looping stream_id from 1 like in all the other places in the driver, and check that the ring exists before trying to kill URBs on it. Reported-by: rocko r <rockorequin@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27xhci: fix 20000ms port resume timeoutMathias Nyman
commit a54408d0a004757789863d74e29c2297edae0b4d upstream. A uncleared PLC (port link change) bit will prevent furuther port event interrupts for that port. Leaving it uncleared caused get_port_status() to timeout after 20000ms while waiting to get the final port event interrupt for resume -> U0 state change. This is a targeted fix for a specific case where we get a port resume event racing with xhci resume. The port event interrupt handler notices xHC is not yet running and bails out early, leaving PLC uncleared. The whole xhci port resuming needs more attention, but while working on it it anyways makes sense to always ensure PLC is cleared in get_port_status before setting a new link state and waiting for its completion. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ipvs: SNAT packet replies only for NATed connectionsJulian Anastasov
commit 3c5ab3f395d66a9e4e937fcfdf6ebc63894f028b upstream. We do not check if packet from real server is for NAT connection before performing SNAT. This causes problems for setups that use DR/TUN and allow local clients to access the real server directly, for example: - local client in director creates IPVS-DR/TUN connection CIP->VIP and the request packets are routed to RIP. Talks are finished but IPVS connection is not expired yet. - second local client creates non-IPVS connection CIP->RIP with same reply tuple RIP->CIP and when replies are received on LOCAL_IN we wrongly assign them for the first client connection because RIP->CIP matches the reply direction. As result, IPVS SNATs replies for non-IPVS connections. The problem is more visible to local UDP clients but in rare cases it can happen also for TCP or remote clients when the real server sends the reply traffic via the director. So, better to be more precise for the reply traffic. As replies are not expected for DR/TUN connections, better to not touch them. Reported-by: Nick Moriarty <nick.moriarty@york.ac.uk> Tested-by: Nick Moriarty <nick.moriarty@york.ac.uk> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27PCI/PM: Restore the status of PCI devices across hibernationChen Yu
commit e60514bd4485c0c7c5a7cf779b200ce0b95c70d6 upstream. Currently we saw a lot of "No irq handler" errors during hibernation, which caused the system hang finally: ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata4.00: revalidation failed (errno=-5) ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) do_IRQ: 31.151 No irq handler for vector According to above logs, there is an interrupt triggered and it is dispatched to CPU31 with a vector number 151, but there is no handler for it, thus this IRQ will not get acked and will cause an IRQ flood which kills the system. To be more specific, the 31.151 is an interrupt from the AHCI host controller. After some investigation, the reason why this issue is triggered is because the thaw_noirq() function does not restore the MSI/MSI-X settings across hibernation. The scenario is illustrated below: 1. Before hibernation, IRQ 34 is the handler for the AHCI device, which is bound to CPU31. 2. Hibernation starts, the AHCI device is put into low power state. 3. All the nonboot CPUs are put offline, so IRQ 34 has to be migrated to the last alive one - CPU0. 4. After the snapshot has been created, all the nonboot CPUs are brought up again; IRQ 34 remains bound to CPU0. 5. AHCI devices are put into D0. 6. The snapshot is written to the disk. The issue is triggered in step 6. The AHCI interrupt should be delivered to CPU0, however it is delivered to the original CPU31 instead, which causes the "No irq handler" issue. Ying Huang has provided a clue that, in step 3 it is possible that writing to the register might not take effect as the PCI devices have been suspended. In step 3, the IRQ 34 affinity should be modified from CPU31 to CPU0, but in fact it is not. In __pci_write_msi_msg(), if the device is already in low power state, the low level MSI message entry will not be updated but cached. During the device restore process after a normal suspend/resume, pci_restore_msi_state() writes the cached MSI back to the hardware. But this is not the case for hibernation. pci_restore_msi_state() is not currently called in pci_pm_thaw_noirq(), although pci_save_state() has saved the necessary PCI cached information in pci_pm_freeze_noirq(). Restore the PCI status for the device during hibernation. Otherwise the status might be lost across hibernation (for example, settings for MSI, MSI-X, ATS, ACS, IOV, etc.), which might cause problems during hibernation. Suggested-by: Ying Huang <ying.huang@intel.com> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Ying Huang <ying.huang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27PCI: rockchip: Use normal register bank for config accessorsShawn Lin
commit dc8cca5ef25ac4cb0dfc37467521a759767ff361 upstream. Rockchip's RC has two banks of registers for the root port: a normal bank that is strictly compatible with the PCIe spec, and a privileged bank that can be used to change RO bits of root port registers. When probing the RC driver, we use the privileged bank to do some basic setup work as some RO bits are hw-inited to wrong value. But we didn't change to the normal bank after probing the driver. This leads to a serious problem when the PME code tries to clear the PME status by writing PCI_EXP_RTSTA_PME to the register of PCI_EXP_RTSTA. Per PCIe 3.0 spec, section 7.8.14, the PME status bit is RW1C. So the PME code is doing the right thing to clear the PME status but we find the RC doesn't clear it but actually setting it to one. So finally the system trap in pcie_pme_work_fn() as PCI_EXP_RTSTA_PME is true now forever. This issue can be reproduced by booting kernel with pci=nomsi. Use the normal register bank for the PCI config accessors. The privileged bank is used only internally by this driver. Fixes: e77f847d ("PCI: rockchip: Add Rockchip PCIe controller support") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27PCI: Work around poweroff & suspend-to-RAM issue on Macbook Pro 11Bjorn Helgaas
commit 13cfc732160f7bc7e596128ce34cda361c556966 upstream. Neither soft poweroff (transition to ACPI power state S5) nor suspend-to-RAM (transition to state S3) works on the Macbook Pro 11,4 and 11,5. The problem is related to the [mem 0x7fa00000-0x7fbfffff] space. When we use that space, e.g., by assigning it to the 00:1c.0 Root Port, the ACPI Power Management 1 Control Register (PM1_CNT) at [io 0x1804] doesn't work anymore. Linux does a soft poweroff (transition to S5) by writing to PM1_CNT. The theory about why this doesn't work is: - The write to PM1_CNT causes an SMI - The BIOS SMI handler depends on something in [mem 0x7fa00000-0x7fbfffff] - When Linux assigns [mem 0x7fa00000-0x7fbfffff] to the 00:1c.0 Port, it covers up whatever the SMI handler uses, so the SMI handler no longer works correctly Reserve the [mem 0x7fa00000-0x7fbfffff] space so we don't assign it to anything. This is voodoo programming, since we don't know what the real conflict is, but we've failed to find the root cause. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=103211 Tested-by: thejoe@gmail.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27af_key: Fix sadb_x_ipsecrequest parsingHerbert Xu
commit 096f41d3a8fcbb8dde7f71379b1ca85fe213eded upstream. The parsing of sadb_x_ipsecrequest is broken in a number of ways. First of all we're not verifying sadb_x_ipsecrequest_len. This is needed when the structure carries addresses at the end. Worse we don't even look at the length when we parse those optional addresses. The migration code had similar parsing code that's better but it also has some deficiencies. The length is overcounted first of all as it includes the header itself. It also fails to check the length before dereferencing the sa_family field. This patch fixes those problems in parse_sockaddr_pair and then uses it in parse_ipsecrequest. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27powerpc/mm/radix: Properly clear process table entryBenjamin Herrenschmidt
commit c6bb0b8d426a8cf865ca9c8a532cc3a2927cfceb upstream. On radix, the process table entry we want to clear when destroying a context is entry 0, not entry 1. This has no *immediate* consequence on Power9, but it can cause other bugs to become worse. Fixes: 7e381c0ff618 ("powerpc/mm/radix: Add mmu context handling callback for radix") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27powerpc/asm: Mark cr0 as clobbered in mftb()Oliver O'Halloran
commit 2400fd822f467cb4c886c879d8ad99feac9cf319 upstream. The workaround for the CELL timebase bug does not correctly mark cr0 as being clobbered. This means GCC doesn't know that the asm block changes cr0 and might leave the result of an unrelated comparison in cr0 across the block, which we then trash, leading to basically random behaviour. Fixes: 859deea949c3 ("[POWERPC] Cell timebase bug workaround") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> [mpe: Tweak change log and flag for stable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27powerpc: Fix emulation of mfocrf in emulate_step()Anton Blanchard
commit 64e756c55aa46fc18fd53e8f3598b73b528d8637 upstream. From POWER4 onwards, mfocrf() only places the specified CR field into the destination GPR, and the rest of it is set to 0. The PowerPC AS from version 3.0 now requires this behaviour. The emulation code currently puts the entire CR into the destination GPR. Fix it. Fixes: 6888199f7fe5 ("[POWERPC] Emulate more instructions in software") Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27powerpc: Fix emulation of mcrf in emulate_step()Anton Blanchard
commit 87c4b83e0fe234a1f0eed131ab6fa232036860d5 upstream. The mcrf emulation code was using the CR field number directly as the shift value, without taking into account that CR fields are numbered from 0-7 starting at the high bits. That meant it was looking at the CR fields in the reverse order. Fixes: cf87c3f6b647 ("powerpc: Emulate icbi, mcrf and conditional-trap instructions") Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27powerpc/64: Fix atomic64_inc_not_zero() to return an intMichael Ellerman
commit 01e6a61aceb82e13bec29502a8eb70d9574f97ad upstream. Although it's not documented anywhere, there is an expectation that atomic64_inc_not_zero() returns a result which fits in an int. This is the behaviour implemented on all arches except powerpc. This has caused at least one bug in practice, in the percpu-refcount code, where the long result from our atomic64_inc_not_zero() was truncated to an int leading to lost references and stuck systems. That was worked around in that code in commit 966d2b04e070 ("percpu-refcount: fix reference leak during percpu-atomic transition"). To the best of my grepping abilities there are no other callers in-tree which truncate the value, but we should fix it anyway. Because the breakage is subtle and potentially very harmful I'm also tagging it for stable. Code generation is largely unaffected because in most cases the callers are just using the result for a test anyway. In particular the case of fget() that was mentioned in commit a6cf7ed5119f ("powerpc/atomic: Implement atomic*_inc_not_zero") generates exactly the same code. Fixes: a6cf7ed5119f ("powerpc/atomic: Implement atomic*_inc_not_zero") Noticed-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp()Balbir Singh
commit e71ff982ae4c17d176e9f0132157d54973788377 upstream. Once upon a time there were only two PP (page protection) bits. In ISA 2.03 an additional PP bit was added, but because of the layout of the HPTE it could not be made contiguous with the existing PP bits. The result is that we now have three PP bits, named pp0, pp1, pp2, where pp0 occupies bit 63 of dword 1 of the HPTE and pp1 and pp2 occupy bits 1 and 0 respectively. Until recently Linux hasn't used pp0, however with the addition of _PAGE_KERNEL_RO we started using it. The problem arises in the LPAR code, where we need to translate the PP bits into the argument for the H_PROTECT hypercall. Currently the code only passes bits 0-2 of newpp, which covers pp1, pp2 and N (no execute), meaning pp0 is not passed to the hypervisor at all. We can't simply pass it through in bit 63, as that would collide with a different field in the flags argument, as defined in PAPR. Instead we have to shift it down to bit 8 (IBM bit 55). Fixes: e58e87adc8bf ("powerpc/mm: Update _PAGE_KERNEL_RO") Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Simplify the test, rework change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27xen/scsiback: Fix a TMR related use-after-freeBart Van Assche
commit 9f4ab18ac51dc87345a9cbd2527e6acf7a0a9335 upstream. scsiback_release_cmd() must not dereference se_cmd->se_tmr_req because that memory is freed by target_free_cmd_mem() before scsiback_release_cmd() is called. Fix this use-after-free by inlining struct scsiback_tmr into struct vscsibk_pend. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: David Disseldorp <ddiss@suse.de> Cc: xen-devel@lists.xenproject.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27iscsi-target: Add login_keys_workaround attribute for non RFC initiatorsNicholas Bellinger
commit 138d351eefb727ab9e41a3dc5f112ceb4f6e59f2 upstream. This patch re-introduces part of a long standing login workaround that was recently dropped by: commit 1c99de981f30b3e7868b8d20ce5479fa1c0fea46 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Sun Apr 2 13:36:44 2017 -0700 iscsi-target: Drop work-around for legacy GlobalSAN initiator Namely, the workaround for FirstBurstLength ended up being required by Mellanox Flexboot PXE boot ROMs as reported by Robert. So this patch re-adds the work-around for FirstBurstLength within iscsi_check_proposer_for_optional_reply(), and makes the key optional to respond when the initiator does not propose, nor respond to it. Also as requested by Arun, this patch introduces a new TPG attribute named 'login_keys_workaround' that controls the use of both the FirstBurstLength workaround, as well as the two other existing workarounds for gPXE iSCSI boot client. By default, the workaround is enabled with login_keys_workaround=1, since Mellanox FlexBoot requires it, and Arun has verified the Qlogic MSFT initiator already proposes FirstBurstLength, so it's uneffected by this re-adding this part of the original work-around. Reported-by: Robert LeBlanc <robert@leblancnet.us> Cc: Robert LeBlanc <robert@leblancnet.us> Reviewed-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27scsi: Add STARGET_CREATED_REMOVE state to scsi_target_stateEwan D. Milne
commit f9279c968c257ee39b0d7bd2571a4d231a67bcc1 upstream. The addition of the STARGET_REMOVE state had the side effect of introducing a race condition that can cause a crash. scsi_target_reap_ref_release() checks the starget->state to see if it still in STARGET_CREATED, and if so, skips calling transport_remove_device() and device_del(), because the starget->state is only set to STARGET_RUNNING after scsi_target_add() has called device_add() and transport_add_device(). However, if an rport loss occurs while a target is being scanned, it can happen that scsi_remove_target() will be called while the starget is still in the STARGET_CREATED state. In this case, the starget->state will be set to STARGET_REMOVE, and as a result, scsi_target_reap_ref_release() will take the wrong path. The end result is a panic: [ 1255.356653] Oops: 0000 [#1] SMP [ 1255.360154] Modules linked in: x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel ghash_clmulni_i [ 1255.393234] CPU: 5 PID: 149 Comm: kworker/u96:4 Tainted: G W 4.11.0+ #8 [ 1255.401879] Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013 [ 1255.410327] Workqueue: scsi_wq_6 fc_scsi_scan_rport [scsi_transport_fc] [ 1255.417720] task: ffff88060ca8c8c0 task.stack: ffffc900048a8000 [ 1255.424331] RIP: 0010:kernfs_find_ns+0x13/0xc0 [ 1255.429287] RSP: 0018:ffffc900048abbf0 EFLAGS: 00010246 [ 1255.435123] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 1255.443083] RDX: 0000000000000000 RSI: ffffffff8188d659 RDI: 0000000000000000 [ 1255.451043] RBP: ffffc900048abc10 R08: 0000000000000000 R09: 0000012433fe0025 [ 1255.459005] R10: 0000000025e5a4b5 R11: 0000000025e5a4b5 R12: ffffffff8188d659 [ 1255.466972] R13: 0000000000000000 R14: ffff8805f55e5088 R15: 0000000000000000 [ 1255.474931] FS: 0000000000000000(0000) GS:ffff880616b40000(0000) knlGS:0000000000000000 [ 1255.483959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1255.490370] CR2: 0000000000000068 CR3: 0000000001c09000 CR4: 00000000000406e0 [ 1255.498332] Call Trace: [ 1255.501058] kernfs_find_and_get_ns+0x31/0x60 [ 1255.505916] sysfs_unmerge_group+0x1d/0x60 [ 1255.510498] dpm_sysfs_remove+0x22/0x60 [ 1255.514783] device_del+0xf4/0x2e0 [ 1255.518577] ? device_remove_file+0x19/0x20 [ 1255.523241] attribute_container_class_device_del+0x1a/0x20 [ 1255.529457] transport_remove_classdev+0x4e/0x60 [ 1255.534607] ? transport_add_class_device+0x40/0x40 [ 1255.540046] attribute_container_device_trigger+0xb0/0xc0 [ 1255.546069] transport_remove_device+0x15/0x20 [ 1255.551025] scsi_target_reap_ref_release+0x25/0x40 [ 1255.556467] scsi_target_reap+0x2e/0x40 [ 1255.560744] __scsi_scan_target+0xaa/0x5b0 [ 1255.565312] scsi_scan_target+0xec/0x100 [ 1255.569689] fc_scsi_scan_rport+0xb1/0xc0 [scsi_transport_fc] [ 1255.576099] process_one_work+0x14b/0x390 [ 1255.580569] worker_thread+0x4b/0x390 [ 1255.584651] kthread+0x109/0x140 [ 1255.588251] ? rescuer_thread+0x330/0x330 [ 1255.592730] ? kthread_park+0x60/0x60 [ 1255.596815] ret_from_fork+0x29/0x40 [ 1255.600801] Code: 24 08 48 83 42 40 01 5b 41 5c 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 [ 1255.621876] RIP: kernfs_find_ns+0x13/0xc0 RSP: ffffc900048abbf0 [ 1255.628479] CR2: 0000000000000068 [ 1255.632756] ---[ end trace 34a69ba0477d036f ]--- Fix this by adding another scsi_target state STARGET_CREATED_REMOVE to distinguish this case. Fixes: f05795d3d771 ("scsi: Add intermediate STARGET_REMOVE state to scsi_target_state") Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.Maurizio Lombardi
commit 62e62ffd95539b9220894a7900a619e0f3ef4756 upstream. The enclosure_add_device() function should fail if it can't create the relevant sysfs links. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Tested-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27PM / Domains: Fix unsafe iteration over modified list of domainsKrzysztof Kozlowski
commit a7e2d1bce4c1db471f1cbc0c4666a3112bbf0994 upstream. of_genpd_remove_last() iterates over list of domains and removes matching element thus it has to use safe version of list iteration. Fixes: 17926551c98a (PM / Domains: Add support for removing nested PM domains by provider) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27PM / Domains: Fix unsafe iteration over modified list of domain providersKrzysztof Kozlowski
commit b556b15dc04e9b9b98790f04c21acf5e24f994b2 upstream. of_genpd_del_provider() iterates over list of domain provides and removes matching element thus it has to use safe version of list iteration. Fixes: aa42240ab254 (PM / Domains: Add generic OF-based PM domain look-up) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27PM / Domains: Fix unsafe iteration over modified list of device linksKrzysztof Kozlowski
commit c6e83cac3eda5f7dd32ee1453df2f7abb5c6cd46 upstream. pm_genpd_remove_subdomain() iterates over domain's master_links list and removes matching element thus it has to use safe version of list iteration. Fixes: f721889ff65a ("PM / Domains: Support for generic I/O PM domains (v8)") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27ASoC: compress: Derive substream from stream based on directionSatish Babu Patakokila
commit 01b8cedfd0422326caae308641dcadaa85e0ca72 upstream. Currently compress driver hardcodes direction as playback to get substream from the stream. This results in getting the incorrect substream for compressed capture usecase. To fix this, remove the hardcoding and derive substream based on the stream direction. Signed-off-by: Satish Babu Patakokila <sbpata@codeaurora.org> Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27igb: Explicitly select page 0 at initializationMatwey V Kornilov
commit 440aeca4b9858248d8f16d724d9fa87a4f65fa33 upstream. The functions igb_read_phy_reg_gs40g/igb_write_phy_reg_gs40g (which were removed in 2a3cdea) explicitly selected the required page at every phy_reg access. Currently, igb_get_phy_id_82575 relays on the fact that page 0 is already selected. The assumption is not fulfilled for my Lex 3I380CW motherboard with integrated dual i211 based gigabit ethernet. This leads to igb initialization failure and network interfaces are not working: igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. igb: probe of 0000:01:00.0 failed with error -2 igb: probe of 0000:02:00.0 failed with error -2 In order to fix it, we explicitly select page 0 before first access to phy registers. See also: https://bugzilla.suse.com/show_bug.cgi?id=1009911 See also: http://www.lex.com.tw/products/pdf/3I380A&3I380CW.pdf Fixes: 2a3cdea ("igb: Remove GS40G specific defines/functions") Signed-off-by: Matwey V Kornilov <matwey@sai.msu.ru> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27btrfs: Don't clear SGID when inheriting ACLsJan Kara
commit b7f8a09f8097db776b8d160862540e4fc1f51296 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by moving posix_acl_update_mode() out of __btrfs_set_acl() into btrfs_set_acl(). That way the function will not be called when inheriting ACLs which is what we want as it prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 073931017b49d9458aa351605b43a7e34598caef CC: linux-btrfs@vger.kernel.org CC: David Sterba <dsterba@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27wlcore: fix 64K page supportArnd Bergmann
commit 4a4274bf2dbbd1c7a45be0c89a1687c9d2eef4a0 upstream. In the stable linux-3.16 branch, I ran into a warning in the wlcore driver: drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write': drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Newer kernels no longer show the warning, but the bug is still there, as the allocation is based on the CPU page size rather than the actual capabilities of the hardware. This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes per buffer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>