summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-16Linux 4.9.70v4.9.70Greg Kroah-Hartman
2017-12-16RDMA/cxgb4: Annotate r2 and stag as __be32Leon Romanovsky
[ Upstream commit 7d7d065a5eec7e218174d5c64a9f53f99ffdb119 ] Chelsio cxgb4 HW is big-endian, hence there is need to properly annotate r2 and stag fields as __be32 and not __u32 to fix the following sparse warnings. drivers/infiniband/hw/cxgb4/qp.c:614:16: warning: incorrect type in assignment (different base types) expected unsigned int [unsigned] [usertype] r2 got restricted __be32 [usertype] <noident> drivers/infiniband/hw/cxgb4/qp.c:615:18: warning: incorrect type in assignment (different base types) expected unsigned int [unsigned] [usertype] stag got restricted __be32 [usertype] <noident> Cc: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16md: free unused memory after bitmap resizeZdenek Kabelac
[ Upstream commit 0868b99c214a3d55486c700de7c3f770b7243e7c ] When bitmap is resized, the old kalloced chunks just are not released once the resized bitmap starts to use new space. This fixes in particular kmemleak reports like this one: unreferenced object 0xffff8f4311e9c000 (size 4096): comm "lvm", pid 19333, jiffies 4295263268 (age 528.265s) hex dump (first 32 bytes): 02 80 02 80 02 80 02 80 02 80 02 80 02 80 02 80 ................ 02 80 02 80 02 80 02 80 02 80 02 80 02 80 02 80 ................ backtrace: [<ffffffffa69471ca>] kmemleak_alloc+0x4a/0xa0 [<ffffffffa628c10e>] kmem_cache_alloc_trace+0x14e/0x2e0 [<ffffffffa676cfec>] bitmap_checkpage+0x7c/0x110 [<ffffffffa676d0c5>] bitmap_get_counter+0x45/0xd0 [<ffffffffa676d6b3>] bitmap_set_memory_bits+0x43/0xe0 [<ffffffffa676e41c>] bitmap_init_from_disk+0x23c/0x530 [<ffffffffa676f1ae>] bitmap_load+0xbe/0x160 [<ffffffffc04c47d3>] raid_preresume+0x203/0x2f0 [dm_raid] [<ffffffffa677762f>] dm_table_resume_targets+0x4f/0xe0 [<ffffffffa6774b52>] dm_resume+0x122/0x140 [<ffffffffa6779b9f>] dev_suspend+0x18f/0x290 [<ffffffffa677a3a7>] ctl_ioctl+0x287/0x560 [<ffffffffa677a693>] dm_ctl_ioctl+0x13/0x20 [<ffffffffa62d6b46>] do_vfs_ioctl+0xa6/0x750 [<ffffffffa62d7269>] SyS_ioctl+0x79/0x90 [<ffffffffa6956d41>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16audit: ensure that 'audit=1' actually enables audit for PID 1Paul Moore
[ Upstream commit 173743dd99a49c956b124a74c8aacb0384739a4c ] Prior to this patch we enabled audit in audit_init(), which is too late for PID 1 as the standard initcalls are run after the PID 1 task is forked. This means that we never allocate an audit_context (see audit_alloc()) for PID 1 and therefore miss a lot of audit events generated by PID 1. This patch enables audit as early as possible to help ensure that when PID 1 is forked it can allocate an audit_context if required. Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16ipvlan: fix ipv6 outbound deviceKeefe Liu
[ Upstream commit ca29fd7cce5a6444d57fb86517589a1a31c759e1 ] When process the outbound packet of ipv6, we should assign the master device to output device other than input device. Signed-off-by: Keefe Liu <liuqifa@huawei.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16kbuild: do not call cc-option before KBUILD_CFLAGS initializationMasahiro Yamada
[ Upstream commit 433dc2ebe7d17dd21cba7ad5c362d37323592236 ] Some $(call cc-option,...) are invoked very early, even before KBUILD_CFLAGS, etc. are initialized. The returned string from $(call cc-option,...) depends on KBUILD_CPPFLAGS, KBUILD_CFLAGS, and GCC_PLUGINS_CFLAGS. Since they are exported, they are not empty when the top Makefile is recursively invoked. The recursion occurs in several places. For example, the top Makefile invokes itself for silentoldconfig. "make tinyconfig", "make rpm-pkg" are the cases, too. In those cases, the second call of cc-option from the same line runs a different shell command due to non-pristine KBUILD_CFLAGS. To get the same result all the time, KBUILD_* and GCC_PLUGINS_CFLAGS must be initialized before any call of cc-option. This avoids garbage data in the .cache.mk file. Move all calls of cc-option below the config targets because target compiler flags are unnecessary for Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16powerpc/64: Fix checksum folding in csum_tcpudp_nofold and ip_fast_csum_nofoldPaul Mackerras
commit b492f7e4e07a28e706db26cf4943bb0911435426 upstream. These functions compute an IP checksum by computing a 64-bit sum and folding it to 32 bits (the "nofold" in their names refers to folding down to 16 bits). However, doing (u32) (s + (s >> 32)) is not sufficient to fold a 64-bit sum to 32 bits correctly. The addition can produce a carry out from bit 31, which needs to be added in to the sum to produce the correct result. To fix this, we copy the from64to32() function from lib/checksum.c and use that. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16KVM: arm/arm64: vgic-its: Preserve the revious read from the pending tableMarc Zyngier
commit 64afe6e9eb4841f35317da4393de21a047a883b3 upstream. The current pending table parsing code assumes that we keep the previous read of the pending bits, but keep that variable in the current block, making sure it is discarded on each loop. We end-up using whatever is on the stack. Who knows, it might just be the right thing... Fixes: 33d3bc9556a7d ("KVM: arm64: vgic-its: Read initial LPI pending table") Cc: stable@vger.kernel.org # 4.8 Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16fix kcm_clone()Al Viro
commit a5739435b5a3b8c449f8844ecd71a3b1e89f0a33 upstream. 1) it's fput() or sock_release(), not both 2) don't do fd_install() until the last failure exit. 3) not a bug per se, but... don't attach socket to struct file until it's set up. Take reserving descriptor into the caller, move fd_install() to the caller, sanitize failure exits and calling conventions. Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16usb: gadget: ffs: Forbid usb_ep_alloc_request from sleepingVincent Pelletier
commit 30bf90ccdec1da9c8198b161ecbff39ce4e5a9ba upstream. Found using DEBUG_ATOMIC_SLEEP while submitting an AIO read operation: [ 100.853642] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 100.861148] in_atomic(): 1, irqs_disabled(): 1, pid: 1880, name: python [ 100.867954] 2 locks held by python/1880: [ 100.867961] #0: (&epfile->mutex){....}, at: [<f8188627>] ffs_mutex_lock+0x27/0x30 [usb_f_fs] [ 100.868020] #1: (&(&ffs->eps_lock)->rlock){....}, at: [<f818ad4b>] ffs_epfile_io.isra.17+0x24b/0x590 [usb_f_fs] [ 100.868076] CPU: 1 PID: 1880 Comm: python Not tainted 4.14.0-edison+ #118 [ 100.868085] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 100.868093] Call Trace: [ 100.868122] dump_stack+0x47/0x62 [ 100.868156] ___might_sleep+0xfd/0x110 [ 100.868182] __might_sleep+0x68/0x70 [ 100.868217] kmem_cache_alloc_trace+0x4b/0x200 [ 100.868248] ? dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3] [ 100.868302] dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3] [ 100.868343] usb_ep_alloc_request+0x16/0xc0 [udc_core] [ 100.868386] ffs_epfile_io.isra.17+0x444/0x590 [usb_f_fs] [ 100.868424] ? _raw_spin_unlock_irqrestore+0x27/0x40 [ 100.868457] ? kiocb_set_cancel_fn+0x57/0x60 [ 100.868477] ? ffs_ep0_poll+0xc0/0xc0 [usb_f_fs] [ 100.868512] ffs_epfile_read_iter+0xfe/0x157 [usb_f_fs] [ 100.868551] ? security_file_permission+0x9c/0xd0 [ 100.868587] ? rw_verify_area+0xac/0x120 [ 100.868633] aio_read+0x9d/0x100 [ 100.868692] ? __fget+0xa2/0xd0 [ 100.868727] ? __might_sleep+0x68/0x70 [ 100.868763] SyS_io_submit+0x471/0x680 [ 100.868878] do_int80_syscall_32+0x4e/0xd0 [ 100.868921] entry_INT80_32+0x2a/0x2a [ 100.868932] EIP: 0xb7fbb676 [ 100.868941] EFLAGS: 00000292 CPU: 1 [ 100.868951] EAX: ffffffda EBX: b7aa2000 ECX: 00000002 EDX: b7af8368 [ 100.868961] ESI: b7fbb660 EDI: b7aab000 EBP: bfb6c658 ESP: bfb6c638 [ 100.868973] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16s390: always save and restore all registers on context switchHeiko Carstens
commit fbbd7f1a51965b50dd12924841da0d478f3da71b upstream. The switch_to() macro has an optimization to avoid saving and restoring register contents that aren't needed for kernel threads. There is however the possibility that a kernel thread execve's a user space program. In such a case the execve'd process can partially see the contents of the previous process, which shouldn't be allowed. To avoid this, simply always save and restore register contents on context switch. Fixes: fdb6d070effba ("switch_to: dont restore/save access & fpu regs for kernel threads") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16ipmi: Stop timers before cleaning up the moduleMasamitsu Yamazaki
commit 4f7f5551a760eb0124267be65763008169db7087 upstream. System may crash after unloading ipmi_si.ko module because a timer may remain and fire after the module cleaned up resources. cleanup_one_si() contains the following processing. /* * Make sure that interrupts, the timer and the thread are * stopped and will not run again. */ if (to_clean->irq_cleanup) to_clean->irq_cleanup(to_clean); wait_for_timer_and_thread(to_clean); /* * Timeouts are stopped, now make sure the interrupts are off * in the BMC. Note that timers and CPU interrupts are off, * so no need for locks. */ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); schedule_timeout_uninterruptible(1); } si_state changes as following in the while loop calling poll(to_clean). SI_GETTING_MESSAGES => SI_CHECKING_ENABLES => SI_SETTING_ENABLES => SI_GETTING_EVENTS => SI_NORMAL As written in the code comments above, timers are expected to stop before the polling loop and not to run again. But the timer is set again in the following process when si_state becomes SI_SETTING_ENABLES. => poll => smi_event_handler => handle_transaction_done // smi_info->si_state == SI_SETTING_ENABLES => start_getting_events => start_new_msg => smi_mod_timer => mod_timer As a result, before the timer set in start_new_msg() expires, the polling loop may see si_state becoming SI_NORMAL and the module clean-up finishes. For example, hard LOCKUP and panic occurred as following. smi_timeout was called after smi_event_handler, kcs_event and hangs at port_inb() trying to access I/O port after release. [exception RIP: port_inb+19] RIP: ffffffffc0473053 RSP: ffff88069fdc3d80 RFLAGS: 00000006 RAX: ffff8806800f8e00 RBX: ffff880682bd9400 RCX: 0000000000000000 RDX: 0000000000000ca3 RSI: 0000000000000ca3 RDI: ffff8806800f8e40 RBP: ffff88069fdc3d80 R8: ffffffff81d86dfc R9: ffffffff81e36426 R10: 00000000000509f0 R11: 0000000000100000 R12: 0000000000]:000000 R13: 0000000000000000 R14: 0000000000000246 R15: ffff8806800f8e00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 --- <NMI exception stack> --- To fix the problem I defined a flag, timer_can_start, as member of struct smi_info. The flag is enabled immediately after initializing the timer and disabled immediately before waiting for timer deletion. Fixes: 0cfec916e86d ("ipmi: Start the timer and thread on internal msgs") Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com> [Adjusted for recent changes in the driver.] [Some fairly major changes went into the IPMI driver in 4.15, so this required a backport as the code had changed and moved to a different file. The 4.14 version of this patch moved some code under an if statement causing it to not apply to 4.7-4.13.] Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16Fix handling of verdicts after NF_QUEUEDebabrata Banerjee
[This fix is only needed for v4.9 stable since v4.10+ does not have the issue] A verdict of NF_STOLEN after NF_QUEUE will cause an incorrect return value and a potential kernel panic via double free of skb's This was broken by commit 7034b566a4e7 ("netfilter: fix nf_queue handling") and subsequently fixed in v4.10 by commit c63cbc460419 ("netfilter: use switch() to handle verdict cases from nf_hook_slow()"). However that commit cannot be cleanly cherry-picked to v4.9 Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-12-16tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()Tommi Rantala
[ Upstream commit c7799c067c2ae33e348508c8afec354f3257ff25 ] Remove the second tipc_rcv() call in tipc_udp_recv(). We have just checked that the bearer is not up, and calling tipc_rcv() with a bearer that is not up leads to a TIPC div-by-zero crash in tipc_node_calculate_timer(). The crash is rare in practice, but can happen like this: We're enabling a bearer, but it's not yet up and fully initialized. At the same time we receive a discovery packet, and in tipc_udp_recv() we end up calling tipc_rcv() with the not-yet-initialized bearer, causing later the div-by-zero crash in tipc_node_calculate_timer(). Jon Maloy explains the impact of removing the second tipc_rcv() call: "link setup in the worst case will be delayed until the next arriving discovery messages, 1 sec later, and this is an acceptable delay." As the tipc_rcv() call is removed, just leave the function via the rcu_out label, so that we will kfree_skb(). [ 12.590450] Own node address <1.1.1>, network identity 1 [ 12.668088] divide error: 0000 [#1] SMP [ 12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1 [ 12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 12.682095] task: ffff8c2a761edb80 task.stack: ffffa41cc0cac000 [ 12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] [ 12.686486] RSP: 0018:ffff8c2a7fc838a0 EFLAGS: 00010246 [ 12.688451] RAX: 0000000000000000 RBX: ffff8c2a5b382600 RCX: 0000000000000000 [ 12.691197] RDX: 0000000000000000 RSI: ffff8c2a5b382600 RDI: ffff8c2a5b382600 [ 12.693945] RBP: ffff8c2a7fc838b0 R08: 0000000000000001 R09: 0000000000000001 [ 12.696632] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2a5d8949d8 [ 12.699491] R13: ffffffff95ede400 R14: 0000000000000000 R15: ffff8c2a5d894800 [ 12.702338] FS: 0000000000000000(0000) GS:ffff8c2a7fc80000(0000) knlGS:0000000000000000 [ 12.705099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.706776] CR2: 0000000001bb9440 CR3: 00000000bd009001 CR4: 00000000003606e0 [ 12.708847] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.711016] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 12.712627] Call Trace: [ 12.713390] <IRQ> [ 12.714011] tipc_node_check_dest+0x2e8/0x350 [tipc] [ 12.715286] tipc_disc_rcv+0x14d/0x1d0 [tipc] [ 12.716370] tipc_rcv+0x8b0/0xd40 [tipc] [ 12.717396] ? minmax_running_min+0x2f/0x60 [ 12.718248] ? dst_alloc+0x4c/0xa0 [ 12.718964] ? tcp_ack+0xaf1/0x10b0 [ 12.719658] ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc] [ 12.720634] tipc_udp_recv+0x71/0x1d0 [tipc] [ 12.721459] ? dst_alloc+0x4c/0xa0 [ 12.722130] udp_queue_rcv_skb+0x264/0x490 [ 12.722924] __udp4_lib_rcv+0x21e/0x990 [ 12.723670] ? ip_route_input_rcu+0x2dd/0xbf0 [ 12.724442] ? tcp_v4_rcv+0x958/0xa40 [ 12.725039] udp_rcv+0x1a/0x20 [ 12.725587] ip_local_deliver_finish+0x97/0x1d0 [ 12.726323] ip_local_deliver+0xaf/0xc0 [ 12.726959] ? ip_route_input_noref+0x19/0x20 [ 12.727689] ip_rcv_finish+0xdd/0x3b0 [ 12.728307] ip_rcv+0x2ac/0x360 [ 12.728839] __netif_receive_skb_core+0x6fb/0xa90 [ 12.729580] ? udp4_gro_receive+0x1a7/0x2c0 [ 12.730274] __netif_receive_skb+0x1d/0x60 [ 12.730953] ? __netif_receive_skb+0x1d/0x60 [ 12.731637] netif_receive_skb_internal+0x37/0xd0 [ 12.732371] napi_gro_receive+0xc7/0xf0 [ 12.732920] receive_buf+0x3c3/0xd40 [ 12.733441] virtnet_poll+0xb1/0x250 [ 12.733944] net_rx_action+0x23e/0x370 [ 12.734476] __do_softirq+0xc5/0x2f8 [ 12.734922] irq_exit+0xfa/0x100 [ 12.735315] do_IRQ+0x4f/0xd0 [ 12.735680] common_interrupt+0xa2/0xa2 [ 12.736126] </IRQ> [ 12.736416] RIP: 0010:native_safe_halt+0x6/0x10 [ 12.736925] RSP: 0018:ffffa41cc0cafe90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff4d [ 12.737756] RAX: 0000000000000000 RBX: ffff8c2a761edb80 RCX: 0000000000000000 [ 12.738504] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 12.739258] RBP: ffffa41cc0cafe90 R08: 0000014b5b9795e5 R09: ffffa41cc12c7e88 [ 12.740118] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 12.740964] R13: ffff8c2a761edb80 R14: 0000000000000000 R15: 0000000000000000 [ 12.741831] default_idle+0x2a/0x100 [ 12.742323] arch_cpu_idle+0xf/0x20 [ 12.742796] default_idle_call+0x28/0x40 [ 12.743312] do_idle+0x179/0x1f0 [ 12.743761] cpu_startup_entry+0x1d/0x20 [ 12.744291] start_secondary+0x112/0x120 [ 12.744816] secondary_startup_64+0xa5/0xa5 [ 12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00 00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48 89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f [ 12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP: ffff8c2a7fc838a0 [ 12.748555] ---[ end trace 1399ab83390650fd ]--- [ 12.749296] Kernel panic - not syncing: Fatal exception in interrupt [ 12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 12.751215] Rebooting in 60 seconds.. Fixes: c9b64d492b1f ("tipc: add replicast peer discovery") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16s390/qeth: fix thinko in IPv4 multicast address trackingJulian Wiedmann
[ Upsteam commit bc3ab70584696cb798b9e1e0ac8e6ced5fd4c3b8 ] Commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") reworked how secondary addresses are managed for qeth devices. Instead of dropping & subsequently re-adding all addresses on every ndo_set_rx_mode() call, qeth now keeps track of the addresses that are currently registered with the HW. On a ndo_set_rx_mode(), we thus only need to do (de-)registration requests for the addresses that have actually changed. On L3 devices, the lookup for IPv4 Multicast addresses checks the wrong hashtable - and thus never finds a match. As a result, we first delete *all* such addresses, and then re-add them again. So each set_rx_mode() causes a short period where the IPv4 Multicast addresses are not registered, and the card stops forwarding inbound traffic for them. Fix this by setting the ->is_multicast flag on the lookup object, thus enabling qeth_l3_ip_from_hash() to search the correct hashtable and find a match there. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16s390/qeth: fix GSO throughput regressionJulian Wiedmann
[ Upstream commit 6d69b1f1eb7a2edf8a3547f361c61f2538e054bb ] Using GSO with small MTUs currently results in a substantial throughput regression - which is caused by how qeth needs to map non-linear skbs into its IO buffer elements: compared to a linear skb, each GSO-segmented skb effectively consumes twice as many buffer elements (ie two instead of one) due to the additional header-only part. This causes the Output Queue to be congested with low-utilized IO buffers. Fix this as follows: If the MSS is low enough so that a non-SG GSO segmentation produces order-0 skbs (currently ~3500 byte), opt out from NETIF_F_SG. This is where we anticipate the biggest savings, since an SG-enabled GSO segmentation produces skbs that always consume at least two buffer elements. Larger MSS values continue to get a SG-enabled GSO segmentation, since 1) the relative overhead of the additional header-only buffer element becomes less noticeable, and 2) the linearization overhead increases. With the throughput regression fixed, re-enable NETIF_F_SG by default to reap the significant CPU savings of GSO. Fixes: 5722963a8e83 ("qeth: do not turn on SG per default") Reported-by: Nils Hoppmann <niho@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16s390/qeth: build max size GSO skbs on L2 devicesJulian Wiedmann
[ Upstream commit 0cbff6d4546613330a1c5f139f5c368e4ce33ca1 ] The current GSO skb size limit was copy&pasted over from the L3 path, where it is needed due to a TSO limitation. As L2 devices don't offer TSO support (and thus all GSO skbs are segmented before they reach the driver), there's no reason to restrict the stack in how large it may build the GSO skbs. Fixes: d52aec97e5bc ("qeth: enable scatter/gather in layer 2 mode") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16tcp/dccp: block bh before arming time_wait timerEric Dumazet
[ Upstream commit cfac7f836a715b91f08c851df915d401a4d52783 ] Maciej Żenczykowski reported some panics in tcp_twsk_destructor() that might be caused by the following bug. timewait timer is pinned to the cpu, because we want to transition timwewait refcount from 0 to 4 in one go, once everything has been initialized. At the time commit ed2e92394589 ("tcp/dccp: fix timewait races in timer handling") was merged, TCP was always running from BH habdler. After commit 5413d1babe8f ("net: do not block BH while processing socket backlog") we definitely can run tcp_time_wait() from process context. We need to block BH in the critical section so that the pinned timer has still its purpose. This bug is more likely to happen under stress and when very small RTO are used in datacenter flows. Fixes: 5413d1babe8f ("net: do not block BH while processing socket backlog") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16stmmac: reset last TSO segment size after device openLars Persson
[ Upstream commit 45ab4b13e46325d00f4acdb365d406e941a15f81 ] The mss variable tracks the last max segment size sent to the TSO engine. We do not update the hardware as long as we receive skb:s with the same value in gso_size. During a network device down/up cycle (mapped to stmmac_release() and stmmac_open() callbacks) we issue a reset to the hardware and it forgets the setting for mss. However we did not zero out our mss variable so the next transmission of a gso packet happens with an undefined hardware setting. This triggers a hang in the TSO engine and eventuelly the netdev watchdog will bark. Fixes: f748be531d70 ("stmmac: support new GMAC4") Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16net: remove hlist_nulls_add_tail_rcu()Eric Dumazet
[ Upstream commit d7efc6c11b277d9d80b99b1334a78bfe7d7edf10 ] Alexander Potapenko reported use of uninitialized memory [1] This happens when inserting a request socket into TCP ehash, in __sk_nulls_add_node_rcu(), since sk_reuseport is not initialized. Bug was added by commit d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") Note that d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") missed the opportunity to get rid of hlist_nulls_add_tail_rcu() : Both UDP sockets and TCP/DCCP listeners no longer use __sk_nulls_add_node_rcu() for their hash insertion. Since all other sockets have unique 4-tuple, the reuseport status has no special meaning, so we can always use hlist_nulls_add_head_rcu() for them and save few cycles/instructions. [1] ================================================================== BUG: KMSAN: use of uninitialized memory in inet_ehash_insert+0xd40/0x1050 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0+ #3288 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace:  <IRQ>  __dump_stack lib/dump_stack.c:16  dump_stack+0x185/0x1d0 lib/dump_stack.c:52  kmsan_report+0x13f/0x1c0 mm/kmsan/kmsan.c:1016  __msan_warning_32+0x69/0xb0 mm/kmsan/kmsan_instr.c:766  __sk_nulls_add_node_rcu ./include/net/sock.h:684  inet_ehash_insert+0xd40/0x1050 net/ipv4/inet_hashtables.c:413  reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:754  inet_csk_reqsk_queue_hash_add+0x1cc/0x300 net/ipv4/inet_connection_sock.c:765  tcp_conn_request+0x31e7/0x36f0 net/ipv4/tcp_input.c:6414  tcp_v4_conn_request+0x16d/0x220 net/ipv4/tcp_ipv4.c:1314  tcp_rcv_state_process+0x42a/0x7210 net/ipv4/tcp_input.c:5917  tcp_v4_do_rcv+0xa6a/0xcd0 net/ipv4/tcp_ipv4.c:1483  tcp_v4_rcv+0x3de0/0x4ab0 net/ipv4/tcp_ipv4.c:1763  ip_local_deliver_finish+0x6bb/0xcb0 net/ipv4/ip_input.c:216  NF_HOOK ./include/linux/netfilter.h:248  ip_local_deliver+0x3fa/0x480 net/ipv4/ip_input.c:257  dst_input ./include/net/dst.h:477  ip_rcv_finish+0x6fb/0x1540 net/ipv4/ip_input.c:397  NF_HOOK ./include/linux/netfilter.h:248  ip_rcv+0x10f6/0x15c0 net/ipv4/ip_input.c:488  __netif_receive_skb_core+0x36f6/0x3f60 net/core/dev.c:4298  __netif_receive_skb net/core/dev.c:4336  netif_receive_skb_internal+0x63c/0x19c0 net/core/dev.c:4497  napi_skb_finish net/core/dev.c:4858  napi_gro_receive+0x629/0xa50 net/core/dev.c:4889  e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4018  e1000_clean_rx_irq+0x1492/0x1d30 drivers/net/ethernet/intel/e1000/e1000_main.c:4474  e1000_clean+0x43aa/0x5970 drivers/net/ethernet/intel/e1000/e1000_main.c:3819  napi_poll net/core/dev.c:5500  net_rx_action+0x73c/0x1820 net/core/dev.c:5566  __do_softirq+0x4b4/0x8dd kernel/softirq.c:284  invoke_softirq kernel/softirq.c:364  irq_exit+0x203/0x240 kernel/softirq.c:405  exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:638  do_IRQ+0x15e/0x1a0 arch/x86/kernel/irq.c:263  common_interrupt+0x86/0x86 Fixes: d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") Fixes: d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexander Potapenko <glider@google.com> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16usbnet: fix alignment for frames with no ethernet headerBjørn Mork
[ Upstream commit a4abd7a80addb4a9547f7dfc7812566b60ec505c ] The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster <jay@systech.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16net/packet: fix a race in packet_bind() and packet_notifier()Eric Dumazet
[ Upstream commit 15fe076edea787807a7cdc168df832544b58eba6 ] syzbot reported crashes [1] and provided a C repro easing bug hunting. When/if packet_do_bind() calls __unregister_prot_hook() and releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This calls register_prot_hook() and hooks again the socket right before first thread is able to grab again po->bind_lock. Fixes this issue by temporarily setting po->num to 0, as suggested by David Miller. [1] dev_remove_pack: ffff8801bf16fa80 not found ------------[ cut here ]------------ kernel BUG at net/core/dev.c:7945! ( BUG_ON(!list_empty(&dev->ptype_all)); ) invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: device syz0 entered promiscuous mode CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cc57a500 task.stack: ffff8801cc588000 RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945 RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293 RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2 RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810 device syz0 entered promiscuous mode RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8 R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0 FS: 0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106 tun_detach drivers/net/tun.c:670 [inline] tun_chr_close+0x49/0x60 drivers/net/tun.c:2845 __fput+0x333/0x7f0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:244 task_work_run+0x199/0x270 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x9bb/0x1ae0 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:968 SYSC_exit_group kernel/exit.c:979 [inline] SyS_exit_group+0x1d/0x20 kernel/exit.c:977 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x44ad19 Fixes: 30f7ea1c2b5f ("packet: race condition in packet_bind") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16packet: fix crash in fanout_demux_rollover()Mike Maloney
syzkaller found a race condition fanout_demux_rollover() while removing a packet socket from a fanout group. po->rollover is read and operated on during packet_rcv_fanout(), via fanout_demux_rollover(), but the pointer is currently cleared before the synchronization in packet_release(). It is safer to delay the cleanup until after synchronize_net() has been called, ensuring all calls to packet_rcv_fanout() for this socket have finished. To further simplify synchronization around the rollover structure, set po->rollover in fanout_add() only if there are no errors. This removes the need for rcu in the struct and in the call to packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...). Crashing stack trace: fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953 xmit_one net/core/dev.c:2975 [inline] dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379 neigh_output include/net/neighbour.h:482 [inline] ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146 NF_HOOK_COND include/linux/netfilter.h:239 [inline] ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163 dst_output include/net/dst.h:459 [inline] NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline] ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432 Fixes: 0648ab70afe6 ("packet: rollover prepare: per-socket state") Fixes: 509c7a1ecc860 ("packet: avoid panic in packet_getsockopt()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16sit: update frag_off infoHangbin Liu
[ Upstream commit f859b4af1c52493ec21173ccc73d0b60029b5b88 ] After parsing the sit netlink change info, we forget to update frag_off in ipip6_tunnel_update(). Fix it by assigning frag_off with new value. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16rds: Fix NULL pointer dereference in __rds_rdma_mapHåkon Bugge
[ Upstream commit f3069c6d33f6ae63a1668737bc78aaaa51bff7ca ] This is a fix for syzkaller719569, where memory registration was attempted without any underlying transport being loaded. Analysis of the case reveals that it is the setsockopt() RDS_GET_MR (2) and RDS_GET_MR_FOR_DEST (7) that are vulnerable. Here is an example stack trace when the bug is hit: BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 IP: __rds_rdma_map+0x36/0x440 [rds] PGD 2f93d03067 P4D 2f93d03067 PUD 2f93d02067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: bridge stp llc tun rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache rds binfmt_misc sb_edac intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul c rc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd glue_helper cryptd iTCO_wdt mei_me sg iTCO_vendor_support ipmi_si mei ipmi_devintf nfsd shpchp pcspkr i2c_i801 ioatd ma ipmi_msghandler wmi lpc_ich mfd_core auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 mgag200 i2c_algo_bit drm_kms_helper ixgbe syscopyarea ahci sysfillrect sysimgblt libahci mdio fb_sys_fops ttm ptp libata sd_mod mlx4_core drm crc32c_intel pps_core megaraid_sas i2c_core dca dm_mirror dm_region_hash dm_log dm_mod CPU: 48 PID: 45787 Comm: repro_set2 Not tainted 4.14.2-3.el7uek.x86_64 #2 Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017 task: ffff882f9190db00 task.stack: ffffc9002b994000 RIP: 0010:__rds_rdma_map+0x36/0x440 [rds] RSP: 0018:ffffc9002b997df0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff882fa2182580 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc9002b997e40 RDI: ffff882fa2182580 RBP: ffffc9002b997e30 R08: 0000000000000000 R09: 0000000000000002 R10: ffff885fb29e3838 R11: 0000000000000000 R12: ffff882fa2182580 R13: ffff882fa2182580 R14: 0000000000000002 R15: 0000000020000ffc FS: 00007fbffa20b700(0000) GS:ffff882fbfb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000002f98a66006 CR4: 00000000001606e0 Call Trace: rds_get_mr+0x56/0x80 [rds] rds_setsockopt+0x172/0x340 [rds] ? __fget_light+0x25/0x60 ? __fdget+0x13/0x20 SyS_setsockopt+0x80/0xe0 do_syscall_64+0x67/0x1b0 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fbff9b117f9 RSP: 002b:00007fbffa20aed8 EFLAGS: 00000293 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000000c84a4 RCX: 00007fbff9b117f9 RDX: 0000000000000002 RSI: 0000400000000114 RDI: 000000000000109b RBP: 00007fbffa20af10 R08: 0000000000000020 R09: 00007fbff9dd7860 R10: 0000000020000ffc R11: 0000000000000293 R12: 0000000000000000 R13: 00007fbffa20b9c0 R14: 00007fbffa20b700 R15: 0000000000000021 Code: 41 56 41 55 49 89 fd 41 54 53 48 83 ec 18 8b 87 f0 02 00 00 48 89 55 d0 48 89 4d c8 85 c0 0f 84 2d 03 00 00 48 8b 87 00 03 00 00 <48> 83 b8 c0 00 00 00 00 0f 84 25 03 00 0 0 48 8b 06 48 8b 56 08 The fix is to check the existence of an underlying transport in __rds_rdma_map(). Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16tipc: fix memory leak in tipc_accept_from_sock()Jon Maloy
[ Upstream commit a7d5f107b4978e08eeab599ee7449af34d034053 ] When the function tipc_accept_from_sock() fails to create an instance of struct tipc_subscriber it omits to free the already created instance of struct tipc_conn instance before it returns. We fix that with this commit. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16s390/qeth: fix early exit from error pathJulian Wiedmann
[ Upstream commit 83cf79a2fec3cf499eb6cb9eb608656fc2a82776 ] When the allocation of the addr buffer fails, we need to free our refcount on the inetdevice before returning. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-16net: qmi_wwan: add Quectel BG96 2c7c:0296Sebastian Sjoholm
[ Upstream commit f9409e7f086fa6c4623769b4b2f4f17a024d8143 ] Quectel BG96 is an Qualcomm MDM9206 based IoT modem, supporting both CAT-M and NB-IoT. Tested hardware is BG96 mounted on Quectel development board (EVB). The USB id is added to qmi_wwan.c to allow QMI communication with the BG96. Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14Linux 4.9.69v4.9.69Greg Kroah-Hartman
2017-12-14afs: Connect up the CB.ProbeUuidDavid Howells
[ Upstream commit f4b3526d83c40dd8bf5948b9d7a1b2c340f0dcc8 ] The handler for the CB.ProbeUuid operation in the cache manager is implemented, but isn't listed in the switch-statement of operation selection, so won't be used. Fix this by adding it. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14IB/mlx5: Assign send CQ and recv CQ of UMR QPMajd Dibbiny
[ Upstream commit 31fde034a8bd964a5c7c1a5663fc87a913158db2 ] The UMR's QP is created by calling mlx5_ib_create_qp directly, and therefore the send CQ and the recv CQ on the ibqp weren't assigned. Assign them right after calling the mlx5_ib_create_qp to assure that any access to those pointers will work as expected and won't crash the system as might happen as part of reset flow. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14IB/mlx4: Increase maximal message size under UD QPMark Bloch
[ Upstream commit 5f22a1d87c5315a98981ecf93cd8de226cffe6ca ] Maximal message should be used as a limit to the max message payload allowed, without the headers. The ConnectX-3 check is done against this value includes the headers. When the payload is 4K this will cause the NIC to drop packets. Increase maximal message to 8K as workaround, this shouldn't change current behaviour because we continue to set the MTU to 4k. To reproduce; set MTU to 4296 on the corresponding interface, for example: ifconfig eth0 mtu 4296 (both server and client) On server: ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096 On client: ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n 1000000 -i 1 -m 4096 Fixes: 6e0d733d9215 ("IB/mlx4: Allow 4K messages for UD QPs") Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14xfrm: Copy policy family in clone_policyHerbert Xu
[ Upstream commit 0e74aa1d79a5bbc663e03a2804399cae418a0321 ] The syzbot found an ancient bug in the IPsec code. When we cloned a socket policy (for example, for a child TCP socket derived from a listening socket), we did not copy the family field. This results in a live policy with a zero family field. This triggers a BUG_ON check in the af_key code when the cloned policy is retrieved. This patch fixes it by copying the family field over. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14jump_label: Invoke jump_label_test() via early_initcall()Jason Baron
[ Upstream commit 92ee46efeb505ead3ab06d3c5ce695637ed5f152 ] Fengguang Wu reported that running the rcuperf test during boot can cause the jump_label_test() to hit a WARN_ON(). The issue is that the core jump label code relies on kernel_text_address() to detect when it can no longer update branches that may be contained in __init sections. The kernel_text_address() in turn assumes that if the system_state variable is greter than or equal to SYSTEM_RUNNING then __init sections are no longer valid (since the assumption is that they have been freed). However, when rcuperf is setup to run in early boot it can call kernel_power_off() which sets the system_state to SYSTEM_POWER_OFF. Since rcuperf initialization is invoked via a module_init(), we can make the dependency of jump_label_test() needing to complete before rcuperf explicit by calling it via early_initcall(). Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1510609727-2238-1-git-send-email-jbaron@akamai.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14atm: horizon: Fix irq release errorArvind Yadav
[ Upstream commit bde533f2ea607cbbbe76ef8738b36243939a7bc2 ] atm_dev_register() can fail here and passed parameters to free irq which is not initialised. Initialization of 'dev->irq' happened after the 'goto out_free_irq'. So using 'irq' insted of 'dev->irq' in free_irq(). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14clk: uniphier: fix DAPLL2 clock rate of Pro5Masahiro Yamada
[ Upstream commit 67affb78a4e4feb837953e3434c8402a5c3b272f ] The parent of DAPLL2 should be DAPLL1. Fix the clock connection. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14bpf: fix lockdep splatEric Dumazet
[ Upstream commit 89ad2fa3f043a1e8daae193bcb5fe34d5f8caf28 ] pcpu_freelist_pop() needs the same lockdep awareness than pcpu_freelist_populate() to avoid a false positive. [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] switchto-defaul/12508 [HC0[0]:SC0[6]:HE0:SE0] is trying to acquire: (&htab->buckets[i].lock){......}, at: [<ffffffff9dc099cb>] __htab_percpu_map_update_elem+0x1cb/0x300 and this task is already holding: (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...}, at: [<ffffffff9e135848>] __dev_queue_xmit+0 x868/0x1240 which would create a new lock dependency: (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...} -> (&htab->buckets[i].lock){......} but this new dependency connects a SOFTIRQ-irq-safe lock: (dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2){+.-...} ... which became SOFTIRQ-irq-safe at: [<ffffffff9db5931b>] __lock_acquire+0x42b/0x1f10 [<ffffffff9db5b32c>] lock_acquire+0xbc/0x1b0 [<ffffffff9da05e38>] _raw_spin_lock+0x38/0x50 [<ffffffff9e135848>] __dev_queue_xmit+0x868/0x1240 [<ffffffff9e136240>] dev_queue_xmit+0x10/0x20 [<ffffffff9e1965d9>] ip_finish_output2+0x439/0x590 [<ffffffff9e197410>] ip_finish_output+0x150/0x2f0 [<ffffffff9e19886d>] ip_output+0x7d/0x260 [<ffffffff9e19789e>] ip_local_out+0x5e/0xe0 [<ffffffff9e197b25>] ip_queue_xmit+0x205/0x620 [<ffffffff9e1b8398>] tcp_transmit_skb+0x5a8/0xcb0 [<ffffffff9e1ba152>] tcp_write_xmit+0x242/0x1070 [<ffffffff9e1baffc>] __tcp_push_pending_frames+0x3c/0xf0 [<ffffffff9e1b3472>] tcp_rcv_established+0x312/0x700 [<ffffffff9e1c1acc>] tcp_v4_do_rcv+0x11c/0x200 [<ffffffff9e1c3dc2>] tcp_v4_rcv+0xaa2/0xc30 [<ffffffff9e191107>] ip_local_deliver_finish+0xa7/0x240 [<ffffffff9e191a36>] ip_local_deliver+0x66/0x200 [<ffffffff9e19137d>] ip_rcv_finish+0xdd/0x560 [<ffffffff9e191e65>] ip_rcv+0x295/0x510 [<ffffffff9e12ff88>] __netif_receive_skb_core+0x988/0x1020 [<ffffffff9e130641>] __netif_receive_skb+0x21/0x70 [<ffffffff9e1306ff>] process_backlog+0x6f/0x230 [<ffffffff9e132129>] net_rx_action+0x229/0x420 [<ffffffff9da07ee8>] __do_softirq+0xd8/0x43d [<ffffffff9e282bcc>] do_softirq_own_stack+0x1c/0x30 [<ffffffff9dafc2f5>] do_softirq+0x55/0x60 [<ffffffff9dafc3a8>] __local_bh_enable_ip+0xa8/0xb0 [<ffffffff9db4c727>] cpu_startup_entry+0x1c7/0x500 [<ffffffff9daab333>] start_secondary+0x113/0x140 to a SOFTIRQ-irq-unsafe lock: (&head->lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [<ffffffff9db5971f>] __lock_acquire+0x82f/0x1f10 [<ffffffff9db5b32c>] lock_acquire+0xbc/0x1b0 [<ffffffff9da05e38>] _raw_spin_lock+0x38/0x50 [<ffffffff9dc0b7fa>] pcpu_freelist_pop+0x7a/0xb0 [<ffffffff9dc08b2c>] htab_map_alloc+0x50c/0x5f0 [<ffffffff9dc00dc5>] SyS_bpf+0x265/0x1200 [<ffffffff9e28195f>] entry_SYSCALL_64_fastpath+0x12/0x17 other info that might help us debug this: Chain exists of: dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2 --> &htab->buckets[i].lock --> &head->lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&head->lock); local_irq_disable(); lock(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2); lock(&htab->buckets[i].lock); <Interrupt> lock(dev_queue->dev->qdisc_class ?: &qdisc_tx_lock#2); *** DEADLOCK *** Fixes: e19494edab82 ("bpf: introduce percpu_freelist") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14sctp: use the right sk after waking up from wait_buf sleepXin Long
[ Upstream commit cea0cc80a6777beb6eb643d4ad53690e1ad1d4ff ] Commit dfcb9f4f99f1 ("sctp: deny peeloff operation on asocs with threads sleeping on it") fixed the race between peeloff and wait sndbuf by checking waitqueue_active(&asoc->wait) in sctp_do_peeloff(). But it actually doesn't work, as even if waitqueue_active returns false the waiting sndbuf thread may still not yet hold sk lock. After asoc is peeled off, sk is not asoc->base.sk any more, then to hold the old sk lock couldn't make assoc safe to access. This patch is to fix this by changing to hold the new sk lock if sk is not asoc->base.sk, meanwhile, also set the sk in sctp_sendmsg with the new sk. With this fix, there is no more race between peeloff and waitbuf, the check 'waitqueue_active' in sctp_do_peeloff can be removed. Thanks Marcelo and Neil for making this clear. v1->v2: fix it by changing to lock the new sock instead of adding a flag in asoc. Suggested-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14sctp: do not free asoc when it is already dead in sctp_sendmsgXin Long
[ Upstream commit ca3af4dd28cff4e7216e213ba3b671fbf9f84758 ] Now in sctp_sendmsg sctp_wait_for_sndbuf could schedule out without holding sock sk. It means the current asoc can be freed elsewhere, like when receiving an abort packet. If the asoc is just created in sctp_sendmsg and sctp_wait_for_sndbuf returns err, the asoc will be freed again due to new_asoc is not nil. An use-after-free issue would be triggered by this. This patch is to fix it by setting new_asoc with nil if the asoc is already dead when cpu schedules back, so that it will not be freed again in sctp_sendmsg. v1->v2: set new_asoc as nil in sctp_sendmsg instead of sctp_wait_for_sndbuf. Suggested-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14zsmalloc: calling zs_map_object() from irq is a bugSergey Senozhatsky
[ Upstream commit 1aedcafbf32b3f232c159b14cd0d423fcfe2b861 ] Use BUG_ON(in_interrupt()) in zs_map_object(). This is not a new BUG_ON(), it's always been there, but was recently changed to VM_BUG_ON(). There are several problems there. First, we use use per-CPU mappings both in zsmalloc and in zram, and interrupt may easily corrupt those buffers. Second, and more importantly, we believe it's possible to start leaking sensitive information. Consider the following case: -> process P swap out zram per-cpu mapping CPU1 compress page A -> IRQ swap out zram per-cpu mapping CPU1 compress page B write page from per-cpu mapping CPU1 to zsmalloc pool iret -> process P write page from per-cpu mapping CPU1 to zsmalloc pool [*] return * so we store overwritten data that actually belongs to another page (task) and potentially contains sensitive data. And when process P will page fault it's going to read (swap in) that other task's data. Link: http://lkml.kernel.org/r/20170929045140.4055-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14sparc64/mm: set fields in deferred pagesPavel Tatashin
[ Upstream commit 2a20aa171071a334d80c4e5d5af719d8374702fc ] Without deferred struct page feature (CONFIG_DEFERRED_STRUCT_PAGE_INIT), flags and other fields in "struct page"es are never changed prior to first initializing struct pages by going through __init_single_page(). With deferred struct page feature enabled there is a case where we set some fields prior to initializing: mem_init() { register_page_bootmem_info(); free_all_bootmem(); ... } When register_page_bootmem_info() is called only non-deferred struct pages are initialized. But, this function goes through some reserved pages which might be part of the deferred, and thus are not yet initialized. mem_init register_page_bootmem_info register_page_bootmem_info_node get_page_bootmem .. setting fields here .. such as: page->freelist = (void *)type; free_all_bootmem() free_low_memory_core_early() for_each_reserved_mem_region() reserve_bootmem_region() init_reserved_page() <- Only if this is deferred reserved page __init_single_pfn() __init_single_page() memset(0) <-- Loose the set fields here We end up with similar issue as in the previous patch, where currently we do not observe problem as memory is zeroed. But, if flag asserts are changed we can start hitting issues. Also, because in this patch series we will stop zeroing struct page memory during allocation, we must make sure that struct pages are properly initialized prior to using them. The deferred-reserved pages are initialized in free_all_bootmem(). Therefore, the fix is to switch the above calls. Link: http://lkml.kernel.org/r/20171013173214.27300-4-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14block: wake up all tasks blocked in get_request()Ming Lei
[ Upstream commit 34d9715ac1edd50285168dd8d80c972739a4f6a4 ] Once blk_set_queue_dying() is done in blk_cleanup_queue(), we call blk_freeze_queue() and wait for q->q_usage_counter becoming zero. But if there are tasks blocked in get_request(), q->q_usage_counter can never become zero. So we have to wake up all these tasks in blk_set_queue_dying() first. Fixes: 3ef28e83ab157997 ("block: generic request_queue reference counting") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14dt-bindings: usb: fix reg-property port-number rangeJohan Hovold
[ Upstream commit f42ae7b0540937e00fe005812997f126aaac4bc2 ] The USB hub port-number range for USB 2.0 is 1-255 and not 1-31 which reflects an arbitrary limit set by the current Linux implementation. Note that for USB 3.1 hubs the valid range is 1-15. Increase the documented valid range in the binding to 255, which is the maximum allowed by the specifications. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14xfs: fix forgotten rcu read unlock when skipping inode reclaimDarrick J. Wong
[ Upstream commit 962cc1ad6caddb5abbb9f0a43e5abe7131a71f18 ] In commit f2e9ad21 ("xfs: check for race with xfs_reclaim_inode"), we skip an inode if we're racing with freeing the inode via xfs_reclaim_inode, but we forgot to release the rcu read lock when dumping the inode, with the result that we exit to userspace with a lock held. Don't do that; generic/320 with a 1k block size fails this very occasionally. ================================================ WARNING: lock held when returning to user space! 4.14.0-rc6-djwong #4 Tainted: G W ------------------------------------------------ rm/30466 is leaving the kernel with locks still held! 1 lock held by rm/30466: #0: (rcu_read_lock){....}, at: [<ffffffffa01364d3>] xfs_ifree_cluster.isra.17+0x2c3/0x6f0 [xfs] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 30466 at kernel/rcu/tree_plugin.h:329 rcu_note_context_switch+0x71/0x700 Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug] CPU: 1 PID: 30466 Comm: rm Tainted: G W 4.14.0-rc6-djwong #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1djwong0 04/01/2014 task: ffff880037680000 task.stack: ffffc90001064000 RIP: 0010:rcu_note_context_switch+0x71/0x700 RSP: 0000:ffffc90001067e50 EFLAGS: 00010002 RAX: 0000000000000001 RBX: ffff880037680000 RCX: ffff88003e73d200 RDX: 0000000000000002 RSI: ffffffff819e53e9 RDI: ffffffff819f4375 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff880062c900d0 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880037680000 R13: 0000000000000000 R14: ffffc90001067eb8 R15: ffff880037680690 FS: 00007fa3b8ce8700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f69bf77c000 CR3: 000000002450a000 CR4: 00000000000006e0 Call Trace: __schedule+0xb8/0xb10 schedule+0x40/0x90 exit_to_usermode_loop+0x6b/0xa0 prepare_exit_to_usermode+0x7a/0x90 retint_user+0x8/0x20 RIP: 0033:0x7fa3b87fda87 RSP: 002b:00007ffe41206568 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff02 RAX: 0000000000000000 RBX: 00000000010e88c0 RCX: 00007fa3b87fda87 RDX: 0000000000000000 RSI: 00000000010e89c8 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000 R10: 000000000000015e R11: 0000000000000246 R12: 00000000010c8060 R13: 00007ffe41206690 R14: 0000000000000000 R15: 0000000000000000 ---[ end trace e88f83bf0cfbd07d ]--- Fixes: f2e9ad212def50bcf4c098c6288779dd97fff0f0 Cc: Omar Sandoval <osandov@fb.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14sunrpc: Fix rpc_task_begin trace pointChuck Lever
[ Upstream commit b2bfe5915d5fe7577221031a39ac722a0a2a1199 ] The rpc_task_begin trace point always display a task ID of zero. Move the trace point call site so that it picks up the new task ID. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14NFS: Fix a typo in nfs_rename()Trond Myklebust
[ Upstream commit d803224c84be067754db7fa58a93f36f61566493 ] On successful rename, the "old_dentry" is retained and is attached to the "new_dir", so we need to call nfs_set_verifier() accordingly. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14dynamic-debug-howto: fix optional/omitted ending line number to be LARGE ↵Randy Dunlap
instead of 0 [ Upstream commit 1f3c790bd5989fcfec9e53ad8fa09f5b740c958f ] line-range is supposed to treat "1-" as "1-endoffile", so handle the special case by setting last_lineno to UINT_MAX. Fixes this error: dynamic_debug:ddebug_parse_query: last-line:0 < 1st-line:1 dynamic_debug:ddebug_exec_query: query parse failed Link: http://lkml.kernel.org/r/10a6a101-e2be-209f-1f41-54637824788e@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14lib/genalloc.c: make the avail variable an atomic_long_tStephen Bates
[ Upstream commit 36a3d1dd4e16bcd0d2ddfb4a2ec7092f0ae0d931 ] If the amount of resources allocated to a gen_pool exceeds 2^32 then the avail atomic overflows and this causes problems when clients try and borrow resources from the pool. This is only expected to be an issue on 64 bit systems. Add the <linux/atomic.h> header to pull in atomic_long* operations. So that 32 bit systems continue to use atomic32_t but 64 bit systems can use atomic64_t. Link: http://lkml.kernel.org/r/1509033843-25667-1-git-send-email-sbates@raithlin.com Signed-off-by: Stephen Bates <sbates@raithlin.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Daniel Mentz <danielmentz@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14drivers/rapidio/devices/rio_mport_cdev.c: fix resource leak in error ↵Christophe JAILLET
handling path in 'rio_dma_transfer()' [ Upstream commit b1402dcb5643b7a27d46a05edd7491d49ba0e248 ] If 'dma_map_sg()', we should branch to the existing error handling path to free some resources before returning. Link: http://lkml.kernel.org/r/61292a4f369229eee03394247385e955027283f8.1505687047.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Christian K_nig <christian.koenig@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-14route: update fnhe_expires for redirect when the fnhe existsXin Long
[ Upstream commit e39d5246111399dbc6e11cd39fd8580191b86c47 ] Now when creating fnhe for redirect, it sets fnhe_expires for this new route cache. But when updating the exist one, it doesn't do it. It will cause this fnhe never to be expired. Paolo already noticed it before, in Jianlin's test case, it became even worse: When ip route flush cache, the old fnhe is not to be removed, but only clean it's members. When redirect comes again, this fnhe will be found and updated, but never be expired due to fnhe_expires not being set. So fix it by simply updating fnhe_expires even it's for redirect. Fixes: aee06da6726d ("ipv4: use seqlock for nh_exceptions") Reported-by: Jianlin Shi <jishi@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-25 02:11:37 +0000