| Age | Commit message (Collapse) | Author |
|---|
|
commit 3bc8088464712fdcb078eefb68837ccfcc413c88 upstream.
Our version check in Documentation/conf.py never envisioned a world where
Sphinx moved beyond 1.x. Now that the unthinkable has happened, fix our
version check to handle higher version numbers correctly.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2a91f4f42018994d7424d405900d17eba6555d0 upstream.
PDF build on Kernel 4.9-rc? returns an error with Sphinx 1.3.x
and Sphinx 1.4.x, when trying to solve some cross-references.
The solution is to redefine the \DURole macro.
However, this is redefined too late. Move such redefinition to
LaTeX preamble and bind it to just the Sphinx versions where the
error is known to be present.
Tested by building the documentation on interactive mode:
make PDFLATEX=xelatex -C Documentation/output/./latex
Fixes: e61a39baf74d ("[media] index.rst: Fix LaTeX error in interactive mode on Sphinx 1.4.x")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Documentation improvements: conversion of all non-DocBook documents
to Sphinx and lots of fixes to the uAPI media book
- New PCI driver for Techwell TW5864 media grabber boards
- New SoC driver for ATMEL Image Sensor Controller
- Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera
drivers)
- Addition of ST CEC driver
- Lots of drivers fixes, improvements and additions
* tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits)
[media] ttusb_dec: avoid the risk of go past buffer
[media] cx23885: Fix some smatch warnings
[media] si2165: switch to regmap
[media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging
[media] si2165: Remove legacy attach
[media] cx231xx: attach si2165 driver via i2c_client
[media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers
[media] cx23885: attach si2165 driver via i2c_client
[media] si2165: support i2c_client attach
[media] si2165: avoid division by zero
[media] rcar-vin: add R-Car gen2 fallback compatibility string
[media] lgdt3306a: remove 20*50 msec unnecessary timeout
[media] cx25821: Remove deprecated create_singlethread_workqueue
[media] cx25821: Drop Freeing of Workqueue
[media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported
[media] redrat3: hardware-specific parameters
[media] redrat3: remove hw_timeout member
[media] cxd2841er: BER and SNR reading for ISDB-T
[media] dvb-usb: avoid link error with dib3000m{b,c|
[media] dvb-usb: split out common parts of dibusb
...
|
|
Pull documentation updates from Jonathan Corbet:
"This is the documentation update pull for the 4.9 merge window.
The Sphinx transition is still creating a fair amount of work. Here we
have a number of fixes and, importantly, a proper PDF output solution,
thanks to Jani Nikula, Mauro Carvalho Chehab and Markus Heiser.
I've started a couple of new books: a driver API book (based on the
old device-drivers.tmpl) and a development tools book. Both are meant
to show how we can integrate together our existing documentation into
a more coherent and accessible whole. It involves moving some stuff
around and formatting changes, but, I think, the results are worth it.
The good news is that most of our existing Documentation/*.txt files
are *almost* in RST format already; the amount of messing around
required is minimal.
And, of course, there's the usual set of updates, typo fixes, and
more"
* tag 'docs-4.9' of git://git.lwn.net/linux: (120 commits)
URL changed for Linux Foundation TAB
dax : Fix documentation with respect to struct pages
iio: Documentation: Correct the path used to create triggers.
docs: Remove space-before-label guidance from CodingStyle
docs-rst: add inter-document cross references
Documentation/email-clients.txt: convert it to ReST markup
Documentation/kernel-docs.txt: reorder based on timestamp
Documentation/kernel-docs.txt: Add dates for online docs
Documentation/kernel-docs.txt: get rid of broken docs
Documentation/kernel-docs.txt: move in-kernel docs
Documentation/kernel-docs.txt: remove more legacy references
Documentation/kernel-docs.txt: add two published books
Documentation/kernel-docs.txt: sort books per publication date
Documentation/kernel-docs.txt: adjust LDD references
Documentation/kernel-docs.txt: some improvements on the ReST output
Documentation/kernel-docs.txt: Consistent indenting: 4 spaces
Documentation/kernel-docs.txt: Add 4 paper/book references
Documentation/kernel-docs.txt: Improve layouting of book list
Documentation/kernel-docs.txt: Remove offline or outdated entries
docs: Clean up bare :: lines
...
|
|
Now that the files at Documentation/development-process/
were converted to ReST, make create a book at Sphinx.
As we'll have other books related to the development process,
we'll add it as a sub-book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Now that the build of PDF output on media got fixed, re-add it
to the Sphinx PDF build.
Partially reverts 3eb6cd6834c3 ('Documentation: exclude
media documentation from pdf generation').
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
|
|
We need adjustbox to allow adjusting the size of tables that
are bigger than the line width. There are quite a few of them
at the media books.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
When XeLaTeX is in interactive mode, it complains that
py@noticelength already exists. Rename it and declare it
only once to avoid such messages.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Instead of painting the box with gray, let's use a colored
box. IMHO, that makes easier to warn users about some issue
pointed by the Sphinx. It also matches to what we do already
with the HTML output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
While the current implementation works well when using as a
paragraph, it doesn't work properly if inside a table. As we
have quite a few such cases, fix the logic to take the column
size into account.
PS.: I took the logic there from the latest version of Sphinx.sty
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add a sphinx-extension to customize the sphinx c-domain. No functional
changes right yet, just the boilerplate code.
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
[ jc: coding-style tweak ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
|
|
This extension will be used by the media books.
The name of the math image extension changed on Sphinx 1.4.x,
according with:
http://www.sphinx-doc.org/en/stable/ext/math.html#module-sphinx.ext.imgmath
Let's autodetect, to keep building with versions < 1.4.
Suggested-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
As we have big tables, reduce the left/right margins and decrease
the point size to 8pt. Visually, it is still good enough, and
now less tables are too big to be displayed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
pdflatex doesn't accept using some UTF-8 chars, like
"equal or less than" or "equal or greater than" chars. However,
the media documents use them. So, we need to use XeLaTeX for
conversion, and a font that accepts such characters.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The output for those notes are bad in pdf, as they're not
in a box with a different color. Also, it causes the output
to not build if the note is inside a table.
Change its implementation to avoid the above troubles.
The logic there came from:
https://stackoverflow.com/questions/606746/how-to-customize-an-existing-latex-environment-without-interfering-with-other-en
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Portrait is too small for some tables used at the media docs.
So, allow documents to tell Sphinx to generate some pages
in landscape by using:
.. raw:: latex
\begin{landscape}
<some stuff>
.. raw:: latex
\end{landscape}
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The usage of rst2pdf was replaced by pdflatex on a previous
patch. Remove the left-over code at conf.py.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
|
|
Add a generic way to build only a reST sub-folder with or
without a individual *build-theme*.
* control *sub-folders* by environment SPHINXDIRS
* control *build-theme* by environment SPHINX_CONF
Folders with a conf.py file, matching $(srctree)/Documentation/*/conf.py
can be build and distributed *stand-alone*. E.g. to compile only the
html of 'media' and 'gpu' folder use::
make SPHINXDIRS="media gpu" htmldocs
To use an additional sphinx-build configuration (*build-theme*) set the
name of the configuration file to SPHINX_CONF. E.g. to compile only the
html of 'media' with the *nit-picking* build use::
make SPHINXDIRS=media SPHINX_CONF=conf_nitpick.py htmldocs
With this, the Documentation/conf.py is read first and updated with the
configuration values from the Documentation/media/conf_nitpick.py.
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
|
|
Although pdflatex is more robust than rst2pdf, building media
documentation pdf still fails. Exclude media documentation from pdf
generation for now.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This should eliminate a whole class of markup warnings, at the cost of
occasionally amusing markup choices; we'll have to see if it works out.
Suggested-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The rst2pdf tool is a very broken toolchain, with is not capable
of parsing complex documents. As such, it doesn't build the
media book, failing with:
[ERROR] pdfbuilder.py:130 too many values to unpack
(using rst2pdf version 0.93.dev-r0 and Sphinx version 1.4.5)
So, make it build only the books we know that are safe to build.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
--
Btw, with the standard Sphinx version shipped on Fedora 24 (Sphinx
1.3.1), rst2pdf doesn't build even the simple kernel-documentation,
failing with this error:
writing Kernel... [ERROR] pdfbuilder.py:130 list index out of range
This is a known bug:
https://github.com/sphinx-doc/sphinx/issues/1844
So, maybe we should just disable pdf generation from RST for good,
as I suspect that maintaining it with a broken toolchain will be a
big headache.
|
|
To honor the:
make O=dir [targets] Locate all output files in "dir"
* activate kernel-include directive
* export BUILDDIR=$(BUILDDIR)
* linux_tv: replace '.. include::' with '.. kernel-include:: $BUILDDIR/<foo.h.rst>'
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Implements the minimal boilerplate for Sphinx HTML theme customization.
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Implements the reST flat-table directive.
The ``flat-table`` is a double-stage list similar to the ``list-table`` with
some additional features:
* column-span: with the role ``cspan`` a cell can be extended through
additional columns
* row-span: with the role ``rspan`` a cell can be extended through
additional rows
* auto span rightmost cell of a table row over the missing cells on the right
side of that table-row. With Option ``:fill-cells:`` this behavior can
changed from *auto span* to *auto fill*, which automaticly inserts (empty)
list tables
The *list tables* formats are double stage lists. Compared to the
ASCII-art they migth be less comfortable for readers of the
text-files. Their advantage is, that they are easy to create/modify
and that the diff of a modification is much more meaningfull, because
it is limited to the modified content.
The initial implementation was taken from the sphkerneldoc project [1]
[1] https://github.com/return42/sphkerneldoc/commits/master/scripts/site-python/linuxdoc/rstFlatTable.py
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
[jc: fixed typos and misspellings in the docs]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Read the version and release from the top level Makefile (for use when
Sphinx is invoked directly, by e.g. Read the Docs), but override them
via Sphinx command line arguments in a normal documentation build.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Tell Sphinx where to find the extension, and pass on the kernel src tree
and kernel-doc paths to the extension.
With this, any .rst files under Documentation may contain the kernel-doc
rst directive to include kernel-doc documentation from any source file.
While building, it may be handy to pass kernel-doc extension
configuration on the command line. For example, 'make SPHINXOPTS="-D
kerneldoc_verbosity=0" htmldocs' silences all stderr output from
kernel-doc when the kernel-doc exit code is 0. (The stderr will be
logged unconditionally when the exit code is non-zero.)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
