summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mtd
AgeCommit message (Collapse)Author
2016-06-03mtd: brcmnand: Add v7.2 controller supportFlorian Fainelli
The 7.2 controller differs in a few area compared to its predecssor (7.1): - NAND scrambler, which we are not using just yet - higher ECC levels (up to 120 bits) per 1KB data blocks, also not supported yet - up to 128B OOB This patch adds the necessary code to support such a controller generation and updates the Device Tree binding. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-30ARM: OMAP2+: Update GPMC and NAND DT binding documentationCooper Jr., Franklin
Add additional details to the GPMC NAND documentation to clarify what is needed to enable NAND DMA prefetch. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-27Merge tag 'for-linus-20160527' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD fixes from Brian Norris: "We've already noticed a few flaws in the MTD work for v4.7-rc1: - The Atmel folks got ahead of themselves on trying to support their latest hardware and were working off incorrect documentation. Fix up the NAND driver to get this correct. - Fix up device tree example documentation to use the latest recommendations for describing NAND ECC algorithms" * tag 'for-linus-20160527' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: drop "soft_bch" from example Revert "mtd: atmel_nand: Support variable RB_EDGE interrupts"
2016-05-27Documentation: dt: mtd: drop "soft_bch" from exampleBaruch Siach
Commit 32698aafc9f0 (Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value, 2016-04-22) deprecated "soft_bch". Update the example to match. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-05-25Revert "mtd: atmel_nand: Support variable RB_EDGE interrupts"Wenyou Yang
This reverts commit 5ddc7bd43ccc ("mtd: atmel_nand: Support variable RB_EDGE interrupts") Because for current SoCs, the RB_EDGE3(i.e. bit 27) of HSMC_SR register does not exist, the RB_EDGE0 (i.e. bit 24) is the ready/busy line edge status bit. It is a datasheet bug. Cc: <stable@vger.kernel.org> Fixes: commit 5ddc7bd43ccc ("mtd: atmel_nand: Support variable RB_EDGE interrupts") Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-05-20Merge tag 'devicetree-for-4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Rewrite of the unflattening code to avoid recursion and lessen the stack usage. - Rewrite of the phandle args parsing code to get rid of the fixed args size. This is needed for IOMMU code. - Sync to latest dtc which adds more dts style checking. These warnings are enabled with "W=1" compiles. - Tegra documentation updates related to the above warnings. - A bunch of spelling and other doc fixes. - Various vendor prefix additions. * tag 'devicetree-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (52 commits) devicetree: Add Creative Technology vendor id gpio: dt-bindings: add ibm,ppc4xx-gpio binding of/unittest: Remove unnecessary module.h header inclusion drivers/of: Fix build warning in populate_node() drivers/of: Fix depth when unflattening devicetree of: dynamic: changeset prop-update revert fix drivers/of: Export of_detach_node() drivers/of: Return allocated memory from of_fdt_unflatten_tree() drivers/of: Specify parent node in of_fdt_unflatten_tree() drivers/of: Rename unflatten_dt_node() drivers/of: Avoid recursively calling unflatten_dt_node() drivers/of: Split unflatten_dt_node() of: include errno.h in of_graph.h of: document refcount incrementation of of_get_cpu_node() Documentation: dt: soc: fix spelling mistakes Documentation: dt: power: fix spelling mistake Documentation: dt: pinctrl: fix spelling mistake Documentation: dt: opp: fix spelling mistake Documentation: dt: net: fix spelling mistakes Documentation: dt: mtd: fix spelling mistake ...
2016-05-18Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, these contain various things that touch the drivers/ directory but got merged through arm-soc for practical reasons. For the most part, this is now related to power management controllers, which have not yet been abstracted into a separate subsystem, and typically require some code in drivers/soc or arch/arm to control the power domains. Another large chunk here is a rework of the NVIDIA Tegra USB3.0 support, which was surprisingly tricky and took a long time to get done. Finally, reset controller handling as always gets merged through here as well" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) arm-ccn: Enable building as module soc/tegra: pmc: Add generic PM domain support usb: xhci: tegra: Add Tegra210 support usb: xhci: Add NVIDIA Tegra XUSB controller driver dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding PCI: tegra: Support per-lane PHYs dt-bindings: pci: tegra: Update for per-lane PHYs phy: tegra: Add Tegra210 support phy: Add Tegra XUSB pad controller support dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding phy: core: Allow children node to be overridden clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs drivers: firmware: psci: make two helper functions inline soc: renesas: rcar-sysc: Add support for R-Car H3 power areas soc: renesas: rcar-sysc: Add support for R-Car E2 power areas soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas soc: renesas: rcar-sysc: Add support for R-Car H2 power areas ...
2016-05-05Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode valueRafał Miłecki
Now that we support nand-ecc-algo property it should be used together with "soft" to specify software BCH ECC. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-05-05mtd: nand: add support for "nand-ecc-algo" DT propertyRafał Miłecki
So far it was only possible to specify ECC algorithm using "soft" and "soft_bch" values of nand-ecc-mode prop. There wasn't a way to specify it for a hardware ECC mode. Now that we have independent field in NAND subsystem for storing info about ECC algorithm we may also add support for this new DT property. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-25Documentation: dt: mtd: fix spelling mistakeEric Engestrom
Signed-off-by: Eric Engestrom <eric@engestrom.ch> Signed-off-by: Rob Herring <robh@kernel.org>
2016-04-19mtd: brcmnand: Add support for v6.2 controllersFlorian Fainelli
Document and match the brcm,brcmnand-v6.2 compatible string, the controller has a register layout identical to the v6.0 version and supports prefetch. Update the command shift logic to account for v6.2 controller which are the first ones to use a shift of 0 (6.1 used a shift of 24). Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-19mtd: nand: document the NAND controller/NAND chip DT representationBoris Brezillon
Standardize the NAND controller/NAND chip DT representation. Now, all new NAND controller drivers should comply with this representation, even if they are only supporting a single NAND chip. Existing drivers can keep support for the old representation (where only the NAND chip was described), but are encouraged to also support the new one. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
2016-04-18Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible stringYuan Yao
new compatible string: "fsl,ls1043a-qspi". Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-15mtd: nand: omap2: Implement NAND ready using gpiolibRoger Quadros
The GPMC WAIT pin status are now available over gpiolib. Update the omap_dev_ready() function to use gpio instead of directly accessing GPMC register space. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-15mtd: nand: omap: Update DT binding documentationRoger Quadros
Add compatible id and interrupts. The NAND interrupts are provided by the GPMC controller node. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-04-04mtd: augment the "arm,versatile-flash" bindingsLinus Walleij
The bindings for the "arm,versatile-flash" device was merged in commit 3ba7222ac992d24d09ccd0b55940b54849eef752 "arm/versatile: Add device tree support" but was never used for anything. Versatile flash chips are actually just standard CFI chips, but they have one or two bits in a system controller to control VPP and write protection. Let's use this compatible string in conjunction with "cfi-flash" to indicate that we have a normal CFI flash with some extra Versatile-specific protection. Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-10dt/bindings: qcom_nandc: Add DT bindingsArchit Taneja
Add DT bindings document for the Qualcomm NAND controller driver. Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-03-07Documentation: fsl-quadspi: Add optional propertiesYao Yuan
Add optional properties for QSPI: big-endian if the register is big endian on this platform. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-03-07Documentation: fsl-quadspi: Add fsl, ls2080a-qspi compatible stringYao Yuan
new compatible string: "fsl,ls2080a-qspi". Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12mtd: atmel_nand: Support 32-bit ECC strengthRomain Izard
As the SAMA5D2 controller supports the 32-bit ECC strength, accept it as a valid setting when required by the device tree or the NAND parameter page. Then configure the controller to use this new setting. For the binding: Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12mtd: atmel_nand: Support PMECC on SAMA5D2Romain Izard
Starting with the SAMA5D2, there is a new revision of the Atmel PMECC controller that can correct 32 bits in each sector. This controller is not 100% compatible with the previous revision that corrected a maximum of 24 bits by sector, as some register addresses overlap. Using information from the device tree, we can configure the driver to work with both versions. For the binding: Acked-by: Rob Herring <robh@kernel.org> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12doc: dt: atmel_nand: Reword the documentationRomain Izard
Do not mention which chips supporting the PMECC controller, as it a duplicate of the information in the chips' device trees. Use common terms when describing the sub-node for the NAND Flash controller. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12mtd: atmel_nand: Support variable RB_EDGE interruptsRomain Izard
The NFC controller used to accelerate the NAND transfers on SAMA5 chips can use either RB_EDGE0 or RB_EDGE3 as its ready/busy interrupt bit. Use the controller's compatible string to select the correct bit. For the binding: Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Wenyou Yang <Wenyou.yang@atmel.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-01-14Merge tag 'devicetree-for-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Rework and export the changeset API to make it available to users other than DT overlays - ARM secure devices binding - OCTEON USB binding - Clean-up of various SRAM binding docs - Various other binding doc updates * tag 'devicetree-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits) drivers/of: Export OF changeset functions Fix documentation for adp1653 DT ARM: psci: Fix indentation in DT bindings of/platform: export of_default_bus_match_table of/unittest: Show broken behaviour in the platform bus of: fix declaration of of_io_request_and_map of/address: replace printk(KERN_ERR ...) with pr_err(...) of/irq: optimize device node matching loop in of_irq_init() dt-bindings: tda998x: Document the required 'port' node. net/macb: bindings doc: Merge cdns-emac to macb dt-bindings: Misc fix for the ATH79 DDR controllers dt-bindings: Misc fix for the ATH79 MISC interrupt controllers Documentation: dt: Add bindings for Secure-only devices dt-bindings: ARM: add arm,cortex-a72 compatible string ASoC: Atmel: ClassD: add GCK's parent clock in DT binding DT: add Olimex to vendor prefixes Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible string Documentation/devicetree: document OCTEON USB bindings usb: misc: usb3503: Describe better how to bind clock to the hub dt-bindings: Consolidate SRAM bindings from all vendors ...
2016-01-06doc: dt: mtd: new binding for jz4780-{nand,bch}Alex Smith
Add DT bindings for NAND devices connected to the NEMC on JZ4780 SoCs, as well as the hardware BCH controller, used by the jz4780_{nand,bch} drivers. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-09doc: dt: mtd: brcmnand: Add brcm,bcm6368-nand device tree bindingSimon Arlott
Add device tree binding for NAND on the BCM6368. The BCM6368 has a NAND interrupt register with combined status and enable registers. It also requires a clock, so add an optional clock to the common brcmnand binding. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-09Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible stringYao Yuan
new compatible string: "fsl,ls1021-qspi". Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-12-09mtd: merge for-4.4 development into -next developmentBrian Norris
A few MAINTAINERS updates, and some DT binding/documentation fixups. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-12-08doc: dt: mtd: partitions: add compatible property to "partitions" nodeBrian Norris
As noted here [1], there are potentially future conflicts if we try to use MTD's "partitions" subnode to describe anything besides just the fixed-in-the-device-tree partitions currently described in this document. Particularly, there was a proposal to use this node for the AFS parser too. It can pose a (small) problem to try to differentiate the following nodes: // using binding as currently specified partitions { #address-cells = <x>; #size-cells = <y>; partition@0 { ...; }; }; and // proposed future binding partitions { compatible = "arm,arm-flash-structure"; }; It's especially difficult if other uses of this node start having subnodes. So, since the "partitions" node is new in v4.4, let's fixup the binding before release so that it requires a compatible property, so it's much clearer to distinguish. e.g.: // proposed partitions { compatible = "fixed-partitions"; #address-cells = <x>; #size-cells = <y>; partition@0 { ...; }; }; [1] Subject: "mtd: create a partition type device tree binding" http://lkml.kernel.org/g/20151113220039.GA74382@google.com http://lists.infradead.org/pipermail/linux-mtd/2015-November/063355.html http://lists.infradead.org/pipermail/linux-mtd/2015-November/063364.html Cc: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Rob Herring <robh@kernel.org>
2015-11-19doc: dt: mtd: stop referring to driver code for spi-nor IDsBrian Norris
Pull the supported chip names from drivers/mtd/devices/m25p80.c and stop pointing readers to Linux code. Also (although I see this habit repeated throughout the Documentation/devicetree/bindings/ tree), stop using the title "driver" in this file, when we're trying explicitly to describe hardware, not software. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: <devicetree@vger.kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-11-11doc: dt: mtd: add documentation for Mediatek spi-nor controllerBayi Cheng
Add device tree binding documentation for serial flash with Mediatek serial flash controller Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> [Brian: fixed up language] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-10mtd: ofpart: document the lock flag.Michal Suchanek
The lock flag of ofpart is undocumented. Add to binding doc. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-30doc: dt: mtd: support partitions in a special 'partitions' subnodeMichal Suchanek
To avoid conflict with other drivers using subnodes of the mtd device create only one ofpart-specific node rather than any number of arbitrary partition subnodes. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600Stefan Roese
This patch adds support for 4-bit ECC BCH4 for the SPEAr600 SoC. This can be used by boards equipped with a NAND chip that requires 4-bit ECC strength. The SPEAr600 HW ECC only supports 1-bit ECC strength. To enable SW BCH4, you need to specify this in your nand controller DT node: nand-ecc-mode = "soft_bch"; nand-ecc-strength = <4>; nand-ecc-step-size = <512>; Tested on a custom SPEAr600 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> [Brian: tweaked the comments a bit] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-09-29mtd: nand: vf610_nfc: add device tree bindingsStefan Agner
Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stefan Agner <stefan@agner.ch> [Brian: fixup #size-cells in example] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-09-02Merge tag 'for-linus-20150901' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "SPI NOR: - reduce virtual address space requirements for fsl-quadspi memory map - new fsl-quadspi IP support: imx6ul-qspi and imx7d-qspi - add new NOR flash device support - add new driver for NXP SPI Flash Interface (SPIFI) - stop abusing SPI API structs for non-SPI framework - fixup DT table matching for new "jedec,spi-nor" string NAND: - brcmnand: fix big endian MIPS macro usage - denali: refactor to use devres, dev_*() printing, etc. - OMAP ELM: change the module alias to actually be usable - pxa3xx_nand: fixup a few command sequencing issues -- both new and old - race conditions in the IRQ handler status clearing - problems when a bootloader left interrupts pending - config issues when overriding the bootloader configuration - new flash device support - sunxi_nand: - optimize timing configuration by calculation, rather than fixed fail-safe values - use EDO setting from ONFI - r852: fix compiler warnings - davinci: add 4KB page support Core: - oobtest: correct debug print information" * tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd: (42 commits) mtd: mtd_oobtest: Fix the address offset with vary_offset case mtd: blkdevs: fix switch-bool compilation warning mtd: spi-nor: stop (ab)using struct spi_device_id mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table mtd: dataflash: Export OF module alias information nand: pxa3xx: Increase READ_ID buffer and make the size static mtd: nand: pxa3xx-nand: fix random command timeouts mtd: nand: pxa3xx_nand: fix early spurious interrupt mtd: pxa3xx_nand: add a default chunk size mtd: omap_elm: Fix module alias mtd: physmap_of: fix null pointer deference when kzalloc returns null mtd: nettel: do not ignore mtd_device_register() failure in nettel_init() mtd: denali_pci: switch to dev_err() mtd: denali_pci: refactor driver using devres API mtd: denali_pci: use module_pci_driver() macro mtd: denali: hide core part from user in Kconfig mtd: spi-nor: add Spansion S25FL204K support mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI) doc: dt: add documentation for nxp,lpc1773-spifi ...
2015-09-01mtd: nand: pxa3xx: add optional dma for pxa architectureRobert Jarzmik
The PXA architecture provides a DMA to pump data from the nand controller to memory and the other way around. Add it to the binding description. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Rob Herring <robh@kernel.org>
2015-08-14doc: dt: add documentation for nxp,lpc1773-spifiJoachim Eastwood
Add device tree binding documentation for the SPI Flash Interface (SPIFI) found on NXP LPC18xx and LPC43xx devies. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-06Documentation: fsl-quadspi: Add fsl, imx6ul-qspi compatible stringFrank Li
new compatible string: "fsl,imx6ul-qspi". Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-06Documentation: fsl-quadspi: Add fsl, imx7d-qspi compatible stringFrank Li
new compatible string: "fsl,imx7d-qspi" Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-18Merge tag 'v4.1-rc4' into MTD's -nextBrian Norris
2015-05-15Documentation: devicetree: brcmstb_nand: add BCM63138 and Cygnus/iProcBrian Norris
Add notes to describe how some SoCs integrate this NAND core a little differently, and so we define extra compatibility strings and register resources/names. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2015-05-15Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"Brian Norris
In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-05-12Documentation: devicetree: add binding doc for Broadcom NAND controllerBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
2015-04-05Documentation: devicetree: m25p80: add "nor-jedec" bindingBrian Norris
Almost all flash that are "compatible" with m25p80 support the JEDEC READ ID opcode (0x9F), and in fact, that is often the only thing that is used to differentiate them. Let's add a compatible string that represents this lowest common denominator of compatibility. Device trees can still specify manufacturer/device names in addition, but (until some reason is found to differentiate between them through device tree) software will likely want to bind just against the generic name, and avoid unnecessarily growing its device ID binding tables. This is related to the work of commit a5b7616c55e1 ("mtd: m25p80,spi-nor: Fix module aliases for m25p80"), which showed that maintaining these device tables as stable device-tree/modalias binding tables is not a worthwhile burden for mostly-comptatible flash. At the same time, let's update the binding doc to point to the m25p_ids[] ID list instead of spi_nor_ids[]. The former can be used for device tree bindings, but the latter cannot. In the future, we should pare down the m25p_ids[] list to only those IDs which are actually used in device trees. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2015-03-24Documentation: devicetree: fix spelling in pxa3xx-nand bindingBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-26mtd: nand: sunxi: fix generic nand binding referenceBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-02-18Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: - Add new Hisilicon NAND driver for Hip04 - Add default reboot handler, to ensure all outstanding erase transactions complete in time - jz4740: convert to use GPIO descriptor API - Atmel: add support for sama5d4 - Change default bitflip threshold to 75% of correction strength - Miscellaneous cleanups and bugfixes SPI NOR: - Freescale QuadSPI: - Fix a few probe() and remove() issues - Add a MAINTAINERS entry for this driver - Tweak transfer size to increase read performance - Add suspend/resume support - Add Micron quad I/O support - ST FSM SPI: miscellaneous fixes JFFS2: - gracefully handle corrupted 'offset' field found on flash Other: - bcm47xxpart: add tweaks for a few new devices - mtdconcat: set return lengths properly for mtd_write_oob() - map_ram: enable use with mtdoops - maps: support fallback to ROM/UBI for write-protected NOR flash" * tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits) mtd: hisilicon: && vs & typo jffs2: fix handling of corrupted summary length mtd: hisilicon: add device tree binding documentation mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc mtd: avoid registering reboot notifier twice mtd: concat: set the return lengths properly mtd: kconfig: replace PPC_OF with PPC mtd: denali: remove unnecessary stubs mtd: nand: remove redundant local variable MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver mtd: fsl-quadspi: improve read performance by increase AHB transfer size mtd: fsl-quadspi: Remove unnecessary 'map_failed' label mtd: fsl-quadspi: Remove unneeded success/error messages mtd: fsl-quadspi: Fix the error paths mtd: nand: omap: drop condition with no effect mtd: nand: jz4740: Convert to GPIO descriptor API mtd: nand: Request strength instead of bytes for soft BCH mtd: nand: default bitflip-reporting threshold to 75% of correction strength mtd: atmel_nand: introduce a new compatible string for sama5d4 chip mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction() ...
2015-02-08mtd: hisilicon: add device tree binding documentationZhou Wang
This patch adds the related dts binding document for Hisilicon 504 NAND controller. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-14 04:08:04 +0000