summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/exynos4210-smdkv310.dts
AgeCommit message (Collapse)Author
2015-02-02ARM: dts: exynos4: Add stdout-path propertiesTomasz Figa
This patch adds stdout-path property to chosen nodes of Exynos4 boards to enable use of earlycon feature without the need to hardcode port number in kernel itself. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17ARM: dts: fix the chip select gpios definition in the SPI nodesNaveen Krishna Chatradhi
This patch replaces the "cs-gpio" from "controller-data" node as was specified in the old binding and uses the standard "cs-gpios" property expected by the SPI core as is defined now in the spi-s3c64xx driver DT binding. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21ARM: dts: Update Exynos DT files with generic compatible stringsSachin Kamat
Add generic compatible strings to the respective board DT files. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: dts: use #include for all device trees for SamsungPadmavathi Venna
Replace /include/ (dtc) with #include (C pre-processor) for all Samsung DT files Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: add pin state information in client nodes for Exynos4 platformsThomas Abraham
Add default pin state information for all client nodes that require pin configuration support using pinctrl interface. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09ARM: dts: Add G2D node to SMDKV310Sachin Kamat
Added G2D DT node to SMDKV310 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-25ARM: dts: add board specific fixed rate clock nodes for Exynos based platformsThomas Abraham
The clock frequency of xxti and xusbxti clocks is dependent on the frequency of the on-board oscillator that is used to generate these clocks. So allow the frequency of these clocks to be specfied from device tree. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07ARM: dts: Add MFC codec support to SMDKV310 DTSachin Kamat
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28ARM: dts: use uart port1 for console on exynos4210-smdkv310Kukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-17ARM: dts: Enable serial controllers on Origen and SMDKV310Tomasz Figa
This patch adds status override of serial nodes to enable used serial ports on Origen and SMDKV310 board. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: dts: use uart2 for console on smdkv310 and smdk5250Kukjin Kim
Cc: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21ARM: dts: Assume status of all optional nodes as disabled for exynos4Tomasz Figa
Currently all boards must explicitly disable all unused device tree nodes of unused components (e.g. i2c, sdhci, etc...). This makes it necessary to all boards to be aware of all components on the SoC, which in turns makes board dts files longer and more difficult to maintain (e.g. adding new components to SoC-level tree requires adding nodes with status="disabled" to every board). This patch changes "status" of all optional components in SoC-level dts file to "disabled", adds status="okay" to respective nodes of used components in dts of all boards and removes all nodes with only status="disabled" from boards dts. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platformsThomas Abraham
Add device nodes for the three instances of spi controllers in EXYNOS4 platforms. Enable instance SPI 2 for SMDKV310 board and disable all spi instances for Origen board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGENThomas Abraham
Add initial dts file for EXYNOS4210 SoC. This dts file describes the SoC specific devices and properties. Along with this, add dts file for Samsung's SMDKV310 board and Insignal's ORIGEN board which uses the EXYNOS4210 dts file and extends it to describe the board specific properties. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-03 01:11:16 +0000