| Age | Commit message (Collapse) | Author |
|---|
|
ERROR (phandle_references): Reference to non-existent node or label "reg_sensor"
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [arch/arm/boot/dts/imx6dl-cubox-i.dtb] Error 2
make[1]: *** Waiting for unfinished jobs....
DTC arch/arm/boot/dts/imx6dl-sabresd-enetirq.dtb
...
The label "reg_sensor" is defined in imx6qdl-sabresd.dts, not in
imx6dl.dtsi. The patch moves the epdc parts to imx6dl-sabresd.dts,
which also sounds better since EPDC module is available not on i.mx6q
but i.mx6dl.
Signed-off-by: Robby Cai <r63905@freescale.com>
|
|
Complete the dts entry for PXP to enable it on
imx6dl platform by default.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
level dts
Move pfuze100 device node from imx6q/dl-sabresd.dts to imx6qdl-sabresd.dts
Signed-off-by: Robin Gong <b38343@freescale.com>
|
|
Add ldo-bypass support on imx6q/dl. Currently, we use ldo-bypass
mode on imx6qdl-sabresd board, and ldo-enabled mode on imx6dl-sabre
auto board.
Signed-off-by: Robin Gong <b38343@freescale.com>
|
|
Add supoort pfuze100 on imx6dl-sabresd board
Signed-off-by: Robin Gong <b38343@freescale.com>
|
|
Add battery device node on imx6q/dl-sabresd and imx6sl-evk board
Signed-off-by: Robin Gong <b38343@freescale.com>
|
|
It's a device tree source porting from imx_3.10.y regarding to LDB and
LCD support on imx6qdl-sabresd board.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
|
The imx6q and imx6dl are two pin-to-pin compatible SoCs. The same board
design can work with either chip plugged into the socket, e.g. sabresd
and sabreauto boards.
We currently define pin groups in imx6q.dtsi and imx6dl.dtsi
respectively because the pad macro names are different between two
chips. This brings a maintenance burden on having the same label point
to the same pin group defined in two places.
The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs
pad macro names. Then the pin groups becomes completely common between
imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the
long term maintenance of imx6q/dt pin settings becomes easier.
Unfortunately, the change brings some dramatic diff stat, but it's all
about DTS file, and the ultimate net diff stat is good.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
Setting GPIO_0 pad as clko1 clock output to provide MCLK for WM8962.
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
|
Add initial imx6dl-sabresd support based on the common stuff already in
imx6qdl-sabresd.dtsi.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
