summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/r8a73a4.dtsi
AgeCommit message (Collapse)Author
2015-02-25ARM: shmobile: r8a73a4 dtsi: Add PM domain supportGeert Uytterhoeven
Add a device node for the System Controller, with subnodes that represent the hardware power area hierarchy. Hook up all devices to their respective PM domains. Add a minimal device node for the Coresight-ETM hardware block, and hook it up to the D4 PM domain, so the R-Mobile System Controller driver can keep the domain powered, until the new Coresight code handles runtime PM. The System Controller is also used by the R-Mobile Reset driver, which can now restart the system. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bugGeert Uytterhoeven
Currently the pin function controller (which is also a GPIO controller) is instantiated before the interrupt controllers due to the order in the DTS. At that time, the irq domains for the interrupt controllers referenced by its interrupts-extended property cannot be found yet: irq: no irq domain found for /interrupt-controller@e61c0000 ! Nevertheless, the core OF probing code ignores this failure, besides a debug message that's not normally printed: not all legacy IRQ resources mapped for pfc and continues initialization of the device. Then, the sh-pfc driver cannot find any IRQ resources, and thinks no interrupts are available, causing gpio-keys to fail later: gpio-keys keyboard: Unable to claim irq 0; error -22 gpio-keys: probe of keyboard failed with error -22 Move the pin function controller node after the interrupt controller nodes it references to work around the bug in the core OF probing code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a73a4 dtsi: Add Bus State Controller nodeGeert Uytterhoeven
Add a node for the Bus State Controller (BSC) on r8a73a4, to which multiple external devices can be connected. The BSC is driven by the ZB clock, and located in PM domain C4. A reference to the latter will be added later. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a73a4: Add MSTP clock assignments to DTUlrich Hecht
Assigns clocks to dmac, i2c*, cmt1, thermal, scif*, sdhi*, and mmcif*. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24ARM: shmobile: r8a73a4: Common clock framework DT descriptionUlrich Hecht
Declares all r8a73a4 clocks supported by the legacy clock framework. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-15ARM: shmobile: r8a73a4 dtsi: Add memory-controller nodesGeert Uytterhoeven
Add device nodes for the two DDR Bus State Controllers (DBSC). The DBSCs are located in the A3BC PM domain, which must not be powered down, else the system will crash. A reference to the A3BC PM domain will be added later. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-21Merge tag 'renesas-dt2-for-v3.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman: * Add labels for LEDs on kzm9g-reference and koelsch * Add Sound support to r8a7790/lager and r8a7791/koelsch * Add IIC DMA nodes to r8a7790 and r8a7791 * Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4 * Add SGX, MMP and VSP1 clocks to r8a7794 * Add USBDMAC{0,1} clocks to r8a7790 and r8a7791 * tag 'renesas-dt2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits) ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device tree ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree ARM: shmobile: r8a7794: Add SGX clock to device tree ARM: shmobile: koelsch: add Volume Ramp usage on comment ARM: shmobile: lager: add Volume Ramp usage on comment ARM: shmobile: r8a7791: add DMA nodes for IIC ARM: shmobile: r8a7790: add DMA nodes for IIC ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs ARM: shmobile: koelsch dts: Add labels for the LEDs ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties ARM: shmobile: koelsch: Sound DMA support via DVC on DTS ARM: shmobile: koelsch: Sound DMA support via SRC on DTS ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS ARM: shmobile: koelsch: Sound DMA support on DTS ARM: shmobile: koelsch: Sound PIO support on DTS ARM: shmobile: koelsch: fixup I2C2 clock frequency ARM: shmobile: lager: Sound DMA support via DVC on DTS ARM: shmobile: lager: Sound DMA support via SRC on DTS ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge tag 'renesas-dt-cleanups2-for-v3.19' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman: * Drop console= bootargs parameter on alt * Correct scifb* naming on r8a73a4 * Drop 0x unit-address prefixes * Remove unnecessary MMC options * tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: alt dts: Drop console= bootargs parameter ARM: shmobile: r8a73a4: fix scifb* naming ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix ARM: shmobile: r8a7790 dtsi: Remove unnecessary MMC options ARM: shmobile: r8a7779 dtsi: Remove unnecessary MMC options ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC options Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible propertiesGeert Uytterhoeven
The IIC nodes used the generic compatible properties only. This may cause the driver to fail when using Standard Speed on IIC masters where the operational clock is driven by the 130 MHz HP clock. Add the SoC-specific compatible property to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-05ARM: shmobile: r8a73a4: fix scifb* namingUlrich Hecht
Ports are named scifb0-3, not scifb2-5. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-30ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible propertyGeert Uytterhoeven
The CMT1 timer used the generic compatible property only. Add the SoC-specific one, which is already documented, to make it future proof. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-24ARM: shmobile: r8a73a4: Add CMT1 nodeSimon Horman
This describes all of the CMT1 hardware of the r8a73a4. The node is disabled and may be enabled as necessary by board DTS files. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-24ARM: shmobile: r8a73a4: sort dtsi file by addressUlrich Hecht
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> [horms+renesas@verge.net.au: updated for removal of dma-multiplexer base address] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-10-24ARM: shmobile: r8a73a4: Remove spurious dma-multiplexer base addressesSimon Horman
As there is no reg property the dma-multiplexer nodes should not include @... Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-09-16ARM: shmobile: r8a73a4 dtsi: Add SoC-specific irqc compatible propertyGeert Uytterhoeven
The interrupt controller used the generic compatible property only. Add the SoC-specific one, to make it future proof. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-09-01ARM: shmobile: r8a73a4 dtsi: Add SoC-specific thermal compatible propertyGeert Uytterhoeven
The thermal node used the generic compatible property only. Add the SoC-specific one, to make it future proof. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-12ARM: shmobile: r8a73a4: Add SCIF nodesSimon Horman
This describes all of the SCIF hardware of the r8a73a4. Each node is disabled and may be enabled as necessary by board DTS files. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-13ARM: shmobile: dts: Move interrupt-parent property to root nodeLaurent Pinchart
There's no need to duplicate the interrupt-parent property in all DT nodes as the kernel automatically walks parent nodes to find the property. Specify it once in the root node only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: r8a73a4: Specify PFC interrupts in DTLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT filesLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use interrupt macros in SoC DT filesLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a73a4: tidyup DT node namingKuninori Morimoto
According to ePAPR spec, this patch tidies up DT node name and related clock. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-14Merge tag 'omap-for-v3.13/quirk-signed' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Changes needed to prepare for making omap3 device tree only: - Always build in board-generic, and add pdata quirks and auxdata support for it so we have all the pdata related quirks in the same place. - Merge of the drivers/pinctrl changes that are needed for PM to continue working on omap3 and also needed for other omaps eventually. The three pinctrl related patches have been acked by Linus Walleij and are pulled into both the pinctrl tree and this branch. - Few defconfig related changes for drivers needed. * tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits) ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it ARM: OMAP2+: Add minimal 8250 support for GPMC ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3 ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap ARM: OMAP2+: Add support for auxdata pinctrl: single: Add support for auxdata pinctrl: single: Add support for wake-up interrupts pinctrl: single: Prepare for supporting SoC specific features ARM: OMAP2+: igep0020: use display init from dss-common ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board +Linux 3.12-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-08ARM: shmobile: r8a73a4: add a DT node for the DMACGuennadi Liakhovetski
Add a DT node for the only system DMAC instance on r8a73a4. The RT DMAC can be added later under the same multiplexer, because they can serve the same slaves and use the same MID-RID values. Configuration data is supplied to the driver, using a compatibility match string. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boardsGuennadi Liakhovetski
Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-21ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> formatGuennadi Liakhovetski
Currently DT compatibility strings of both types can be found in the kernel sources: <unit>-<soc> and <soc>-<unit>, whereas a unique format should be followed and the former one is preferred. This patch converts the SDHI MMC driver and its users to the common standard. This is safe for now, since ATM no real products are using this driver with DT. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Chris Ball <cjb@laptop.org> [Removed r8a7740.dtsi portion as it is not applicable] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-08-14Merge tag 'renesas-pinmux-for-v3.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Renesas ARM based SoC pinmux updates for v3.12 SH Mobile pinctrl DT support * tag 'renesas-pinmux-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT ARM: shmobile: armadillo-reference: Add st1232 pin mappings ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree ARM: shmobile: sh73a0: Add pin control device to device tree ARM: shmobile: sh7372: Add pin control device to device tree ARM: shmobile: r8a7790: Add GPIO controller devices to device tree ARM: shmobile: r8a7790: Add pin control device to device tree ARM: shmobile: r8a7779: Add GPIO controller devices to device tree ARM: shmobile: r8a7779: Add pin control device to device tree ARM: shmobile: r8a7778: Add GPIO controller devices to device tree ARM: shmobile: r8a7778: Add pin control device to device tree ARM: shmobile: r8a7740: Add pin control device to device tree ARM: shmobile: r8a73a4: Add pin control device to device tree Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/boot/dts/r8a73a4.dtsi arch/arm/boot/dts/r8a7790.dtsi
2013-07-22ARM: shmobile: r8a73a4: Add pin control device to device treeLaurent Pinchart
Add a pfc node to the r8a73a4 device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [g.liakhovetski+renesas@gmail.com use 2 nodes for address and size] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templatesGuennadi Liakhovetski
This adds DT templates for all MMCIF and SDHI controllers on r8a73a4. They are added with status="disabled". To use them platform-specific DTs have to enable the required ones. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: r8a73a4: add I2C controller DT nodesGuennadi Liakhovetski
Add Device Tree nodes for the 9 I2C controllers on r8a73a4, compatible with the i2c-sh_mobile.c driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04ARM: shmobile: Remove unused r8a73a4 GIC CPU interface DT bitsMagnus Damm
Remove unused GIC CPU interface DT bits for r8a73a4. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a73a4 SoC 64-bit DT supportTakashi Yoshii
The r8a73a4 SoC supports LPAE and has memory window up to 0x2ffffffff. Convert to 64-bit addresses by enlarging #addr-cells and #size-cells to 2. Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a73a4: add thermal driver supportKuninori Morimoto
You can get current thermal by > cat /sys/class/thermal/thermal_zone?/temp Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: r8a73a4 IRQC support V2Magnus Damm
Add IRQC interrupt controller support to r8a73a4 by hooking up two IRQC instances to handle 58 external IRQ signals. There IRQC controllers are tied to SPIs of the GIC. On r8a73a4 exact IRQ pin routing is handled by the PFC which is excluded from this patch. Both platform devices and DT devices are added in this patch. The platform device versions are used to provide a static interrupt map configuration for board code written in C. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02ARM: shmobile: Initial r8a73a4 SoC support V3Magnus Damm
V3 of initial support for the r8a73a4 SoC including: - Single Cortex-A15 CPU Core - GIC - Architecture timer No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.0.4) at 2024-04-27 21:52:51 +0000