Age | Commit message (Collapse) | Author |
|
SIT tunnels (IPv6 over IPv4) are not often used hence configure
the driver as a module. This also gets rid of the extra network
interface sit0 by default.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Enable ADV7280 decoder for iMX6 modules. ADV7280 and ADV7180 have
same addresses viz. 0x21 respectively, changing the ADV7280 address
to 0x20 would result in a conflict with MAX9526. As a result enable
ADV7280 by default and disable ADV7180.
Signed-off-by: Sanchayan Maity <sanchayan.maity@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Do not include MXC V4L2 capture drivers for now, they cause
compile time errors:
| ERROR: "foreground_sdc_deselect" [drivers/media/platform/mxc/capture/mxc_v4l2_capture.ko] undefined!
| ERROR: "bg_overlay_sdc_deselect" [drivers/media/platform/mxc/capture/mxc_v4l2_capture.ko] undefined!
| ERROR: "bg_overlay_sdc_select" [drivers/media/platform/mxc/capture/mxc_v4l2_capture.ko] undefined!
| ERROR: "foreground_sdc_select" [drivers/media/platform/mxc/capture/mxc_v4l2_capture.ko] undefined!
|
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Compile USB device classes such as WDM and CDC ACM as modules.
Enable FTDI USB-to-serial adapter chips and serial console which
allows to use USB serial device drivers as a serial console at
boot time. Compile USB driver for GSM and CDMA modems (Option and
others) as a module.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
|
|
Enable RTL8192CU driver to support LM006 USB WiFi adapter.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
|
Newer systemd variants need network namespace support for various
services such as systemd-hostnamed or systemd-localed.
(cherry picked from commit 4bb3acd58f8d2074cd8e7a6ddb914a0954d0906a)
|
|
Remove duplicate CONFIG_STMPE_ADC from both defconfigs.
While at it also remove obsolete commented out
CONFIG_NET_VENDOR_ATHEROS being not set on Colibri iMX6.
|
|
|
|
|
|
(cherry picked from commit 47c017b98ce9359f890363b4095c87235a6f81d6)
|
|
|
|
Enable extcon USB GPIO support in the default kernel configuration.
|
|
The WEIM signals are not accessible so remove the driver from the config and
set it to disabled in the device tree.
(cherry picked from commit 6c2f7b22f5aa9572d35a3ddd7d14b653cf606550)
Conflicts:
arch/arm/configs/apalis_imx6_defconfig
|
|
|
|
|
|
Fix PCIe operation by disabling RC/EP test mode which according to the
following community forum post is only used on the PCIe EP/RC
validation system and otherwise prevent PCIe from working properly:
https://community.freescale.com/thread/328257
|
|
|
|
Enable the TouchRevolution Fusion 7 and 10 multi-touch controller driver
to be built as a module.
While at it remove NEW_LEDS which is enabled through dependencies.
|
|
|
|
|
|
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
|
|
|
|
|
|
make savedefconfig shows CONFIG_KEYBOARD_SNVS_PWRKEY and
CONFIG_MXC_MLB150 also needs to be removed.
So remove them together.
Signed-off-by: Dong Aisheng <aisheng.dong@freescale.com>
|
|
enable debugfs in mfg_defconfig for mfgtool to read bch layout setting
from debugfs.
Signed-off-by: Han Xu <b45815@freescale.com>
|
|
fix build error:
arch/arm/mach-imx/ddr3_freq_imx7d.S:425: Error: selected processor does not support ARM mode `dsb'
Signed-off-by: Frank Li <Frank.Li@freescale.com>
|
|
Enable mipi dsi config in the imx_v7_defconfig by default.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
default is 8. android require more.
Change to 16.
Signed-off-by: Frank Li <Frank.Li@freescale.com>
|
|
Fixed build error:
drivers/built-in.o: In function `usb_charger_is_present':
:(.text+0x16d998): undefined reference to `power_supply_changed'
drivers/built-in.o: In function `ci_hdrc_imx_remove':
:(.text+0x16f924): undefined reference to `power_supply_unregister'
drivers/built-in.o: In function `ci_hdrc_imx_probe':
:(.text+0x170094): undefined reference to `power_supply_register'
:(.text+0x170144): undefined reference to `power_supply_unregister
Signed-off-by: Frank Li <Frank.Li@freescale.com>
|
|
Remove CONFIG_IMX6_USB_CHARGER since it's no longer used.
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Li Jun <jun.li@freescale.com>
|
|
- Add CONFIG_USB_OTG_WHITELIST and CONFIG_USB_HCD_TEST_MODE
- Change CONFIG_USB_EHSET_TEST_FIXTURE from 'm' to 'y'
Signed-off-by: Peter Chen <peter.chen@freescale.com>
(cherry picked from commit 40f0d728339fb460a108bc8b133207dd5a17dda8)
|
|
on imx6ul evk board
For the i.MX6UL EVK board, according to the latest schematic, use a GPIO pin along with
the 'PMIC_STBY_REQ' pin to control the DC-DC voltage output. the possible voltage output
as below:
PMIC_STBY_REQ = 0, GPIO_DVFS = 0, output is 1.4V (1.375V + 25mV) <Default>
PMIC_STBY_REQ = 0, GPIO_DVFS = 1, output is 1.3V (1.275V + 25mV)
PMIC_STBY_REQ = 1, GPIO_DVFS = 0, output is 0.925V (0.9V + 25mV)
In normal run mode, the voltage output should be changed using the 'GPIO_DVFS' pin,
so add gpio regulator to control it.
Signed-off-by: Bai Ping <b51503@freescale.com>
|
|
performance"
WL_HOST_WAKEUP feature causes system suspend/resume break, so revert.
This reverts commit d9edd6e61897e4253fcbf0c7d2680933583e13c8.
|
|
Add CONFIG_MXC_CAMERA_OV5647_MIPI to imx_v7_defconfig
Signed-off-by: Sandor Yu <R01008@freescale.com>
|
|
Enable CONFIG_BCM4339 to optimize performance for Broadcom BCM4339 WiFi
which is on MX7D SDB board.
The patch also fixes order of CONFIG_SENSOR_FXLS8471.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
|
|
Add Broadcom bcmdhd driver support.
BTW, the in kernel upstream brcmfmac driver is removed to avoid confusion.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
|
|
Add MXC_MIPI_CSI to imx v7 deconfig.
Signed-off-by: Sandor Yu <R01008@freescale.com>
|
|
Add build support for this new samsung's mipi dsi.
The old mipi dsi build option is removed from the
kernel default config. Instead, add the new mipi
dsi build option to the default config.
Signed-off-by: Fancy Fang <chen.fang@freescale.com>
|
|
This patch add the i.MX6UL support for the imx_v7_mfg_defconfig
This patch is produced by the following steps:
- make imx_v7_mfg menuconfig
- select the ONFIG_SOC_IMX6UL
- make imx_v7_mfg savedefconfig
- copy config to imx_v7_mfg_defconfig
Signed-off-by: Jason Liu <r64343@freescale.com>
|
|
Enable tsc2046/ads7846 touch screen controller
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
|
|
Enable fxls8471 in defconfig.
Signed-off-by: Gao Pan <b54642@freescale.com>
|
|
enable imx6ul touchscreen controller
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
|
|
Enable CONFIG_MICREL_PHY for MICREL PHY since i.MX6ul boards install
micrel ksz8081 phy.
Signed-off-by: Fugang Duan <B38611@freescale.com>
|
|
We don't need btsdio driver support and enable it will cause
Broadcom WiFi driver suspend/resume unwork due to it does not
implement suspend/resume callback.
Signed-off-by: Dong Aisheng <b29396@freescale.com>
|
|
defconfig
Enable mpl3115,fxas2100x and fxos8700 sensors in defconfig.
Signed-off-by: Fugang Duan <B38611@freescale.com>
|
|
Enable i.MX6UL SOC support by default.
Signed-off-by: Anson Huang <b20788@freescale.com>
|
|
Enable the SIM build in the default config.
Signed-off-by: Luwei Zhou <b45643@freescale.com>
|
|
Add machine driver for sii902x hdmi audio. Restricting by SAI master clock,
the hdmi audio just support 16bit 24bit sample width and 32k 48k sample rate.
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
|