summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx6/bus_freq.c
AgeCommit message (Expand)Author
2014-06-06ENGR00316180: [iMX6x] Support IRAM page table when DDR is in self-refresh.Ranjani Vaidyanathan
2014-06-03ENGR00300417: [MX6SL] Add 100M and 24M MMDC parameters for MX6SL LPDDR2Grace Si
2014-06-03ENGR00262832 MX6SL-Lower Audio playback power.Ranjani Vaidyanathan
2014-06-03ENGR00236837 MX6SL-Fix random crash caused by incorrect setting of IPG clk rate.Ranjani Vaidyanathan
2014-06-03ENGR00229437 [MX6SL] Fix AHB clock not changed to 3MHz in IDLE modeNancy Chen
2014-06-03ENGR00229299 [MX6SL] Kernel cannot boot if enable LOCKDEPNancy Chen
2014-06-03ENGR00227245 mx6q: Remove 400M setpoint for bus freqAnson Huang
2014-06-03ENGR00222157 MX6x-Fix bug in transitioning from low_bus to audio_bus mode.Ranjani Vaidyanathan
2014-06-03ENGR00222134 MX6x - Fix race-conditions in low power code.Ranjani Vaidyanathan
2014-06-03ENGR00222133 MX6SL - Fix crashes caused by Low power IDLE supportRanjani Vaidyanathan
2014-06-03ENGR00221161 [MX6SL]- Add audio bus freq mode support.Ranjani Vaidyanathan
2014-06-03ENGR00221440 MX6x-Fix race-condition in checking bus_freq variablesRanjani Vaidyanathan
2014-06-03ENGR00221277 MX6DL/S - Set AXI clock to 270MHzRanjani Vaidyanathan
2014-06-03ENGR00221102-2 MX6Q: increase VPU frequence to 352MhzRobin Gong
2014-06-03ENGR00220696 [MX6SL]-Reduce IDLE mode power consumption.Ranjani Vaidyanathan
2014-06-03ENGR00220370 [MX6]Fix BUS freq suspend/resume fail in low bus modeAnson Huang
2014-06-03ENGR00220496 MX6SL:Add low power IDLE mode optimizations.Ranjani Vaidyanathan
2014-06-03ENGR00220497 [MX6Q, MX6DL]: Fix not able to set high bus freqNancy Chen
2014-06-03ENGR00220297 [MX6SL]: Fix AHB clock not correct after kernel bootNancy Chen
2014-06-03ENGR00220022 [MX6]Add necessary protection to bus freq variables and functionAnson Huang
2014-06-03ENGR00218747 - MX6Q/MX6DL: WAIT mode support for MX6QTO1.2/MX6DLTO1.1Ranjani Vaidyanathan
2014-06-03ENGR00217242 [MX6SL]: VDDSOC_CAP voltage to 1.1V in idle modeNancy Chen
2014-06-03ENGR00217018 [Mx6 ]Need to set 1.1V as PU default voltageAnson Huang
2014-06-03ENGR00216031 [MX6]Need to force bus freq to highest point when suspendAnson Huang
2014-06-03ENGR00215970 [MX6]Enable BUS freq driver by defaultAnson Huang
2014-06-03ENGR00215968[MX6]Enable bus freq for i.MX6DLAnson Huang
2014-06-03ENGR00215668 [MX6]Only restore PU field value instead of whole reg valueAnson Huang
2014-06-03ENGR00215491 [MX6]Need to increase BUS freq when CPU freq is increasedAnson Huang
2014-06-03ENGR00214810 [MX6]Fix bus freq 50M->528M change issueAnson Huang
2014-06-03ENGR00214736 [MX6SL]: Enable BUSFREQ at bootNancy Chen
2014-06-03ENGR00212633 [MX6SL]: Add support for SoC power optimization in Idle modeNancy Chen
2014-06-03ENGR00213903 [MX6]Improve periph parent change flowAnson Huang
2014-06-03ENGR00180919 [MX6]Update clock tree if BUS freq is changedAnson Huang
2014-06-03ENGR00180930 [MX6]Fix low bus mode bug when there is no CPUFreq changeAnson Huang
2014-06-03ENGR000212647 MX6 - Fix IPU and AXI default clock frequencyRanjani Vaidyanathan
2014-06-03ENGR00209620 MX6-Disable PU Brown out detection in low power mode.Ranjani Vaidyanathan
2014-06-03ENGR00181068: MX6 Source IPU_HSP and AXI clocks from 540M PFD.Ranjani Vaidyanathan
2014-06-03ENGR00180882- MX6DL Add bus frequency scaling support.Ranjani Vaidyanathan
2014-06-03ENGR00180185: MX6-Add support for low power audio playbackRanjani Vaidyanathan
2014-06-03ENGR00179574: MX6- Add bus frequency scaling supportRanjani Vaidyanathan
2014-06-03ENGR00139280: MX6: Add CPUFREQ supportRanjani Vaidyanathan
2014-06-03ENGR00139229-1 MX6: Bring up i.MX6 sabreauto with Single coreZeng Zhaoming
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-18 01:47:29 +0000