summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx6
AgeCommit message (Expand)Author
2012-03-08ENGR00176160 [MX6]Correct PLL1 freq change flowAnson Huang
2012-03-07ENGR00176147-2: usb: pass the wakeup event to pdataPeter Chen
2012-03-07ENGR00176068-1 mx6q: add smp_twd clock for localtimerXinyu Chen
2012-03-06ENGR00176136- MX6: Added support for 1.2GHz ARM FrequencyRanjani Vaidyanathan
2012-03-06ENGR00176175 MX6Q: fix typo in cpu op voltage setting.Zhang Jiejing
2012-03-06ENGR00170526-1 MX6Q_Sabreauto: remove audio platform data rst_gpio.Lionel Xu
2012-03-02ENGR00175551:Update sabreauto board file for handling spi and paralle norFrancisco Munoz
2012-03-02ENGR00175947 camera: sensor mclk change name to clko_clkYuxi Sun
2012-03-02ENGR00175219-6 MX6Q_SABRESD: add clko_clk supportGary Zhang
2012-03-02ENGR00175219-5 MX6: remove cko1_clk in clock.cGary Zhang
2012-02-28ENGR00175219-2 MX6Q_SABRESD: add wm8958 supportGary Zhang
2012-02-23ENGR00174905 [MX6] gc355 can't work after specific suspend/resume caseLarry Li
2012-02-22ENGR00174886-1 - EPDC fb: Don't register EPDC unless "epdc" kernel option setDanny Nold
2012-02-22ENGR00174569: MX6 - Disable WAIT mode by defaultRanjani Vaidyanathan
2012-02-22ENGR00174734-1 usb: need to discharge both dp and dmPeter Chen
2012-02-22ENGR00174615:Enable AH-1613 GPS moduleB38613
2012-02-21ENGR00171079-10: mx6q-arm2 cs42888 board sample rate settingsAdrian Alonso
2012-02-21ENGR00171079-8 imx6q sabreauto cs42888 audio supportAdrian Alonso
2012-02-21ENGR00171079-7 mx6q clock anaclk input source clockAdrian Alonso
2012-02-21ENGR00171079-5 imx6q-sabreauto set supportted sample ratesAdrian Alonso
2012-02-21ENGR00171079-2 mx6 add anaclk_2 io buffers enable macrosAdrian Alonso
2012-02-21ENGR00171079-1 mx6q-ard: esai remove record early paramAdrian Alonso
2012-02-21ENGR00175049 - Remove section mismatch warning for Max17135Danny Nold
2012-02-21ENGR00174897 i.mx6: clock: fix axi clock mux settingJason Liu
2012-02-21ENGR00174896 i.mx6: i.mx6l: clock: gpu/vpu clock adjustmentJason Liu
2012-02-20ENGR00174829-1 MX6Q_SABRESD: fix warnning messageZhang Jiejing
2012-02-20ENGR00174824 [MX6]Add workaround for i.MX6DL suspend/resumeAnson Huang
2012-02-17ENGR00174630 [MX6]Disable GPT serial clockAnson Huang
2012-02-16ENGR00174652 i.mx6: explicitly set the LPM mode to run mode during early bootupJason Liu
2012-02-16ENGR00174394 MX6Q_arm2/MX6Q_sabreauto: change ipu_id/disp_id for LDB config.Wayne Zou
2012-02-16ENGR00174649 i.mx6dl: clock: set ipu1 clock to 270M, change ldb_di_clk parentWayne Zou
2012-02-16ENGR00174540: i.mx6: anatop_regulator: LDO voltage print not correctlyJason Liu
2012-02-16ENGR00174532 [mx6Q]Change 2D clock to 480MLarry Li
2012-02-15ENGR00174106-1 - EPDC fb: Support EPDC on MX 6DL/SDanny Nold
2012-02-15ENGR00172274-02 - [MX6]: rework IEEE-1588 in MX6Q Sabre-lite/sd board.Fugang Duan
2012-02-15ENGR00174425: i.mx6: i.mx6dl: clock: set gpu2d_axi clock parent to mmdc0Jason Liu
2012-02-15ENGR00174423-2: i.mx6: clock: code clean up in pfd_set_rateJason Liu
2012-02-15ENGR00174423-1 i.mx6: cpu_op: code clean upJason Liu
2012-02-14ENGR00174381 imx6q-sabreauto: spdif remove tx clock settingsAdrian Alonso
2012-02-14ENGR00174299-2: MSL part: add ePxP V2 driverRobby Cai
2012-02-14ENGR00174121-2 MX6Q_SABRESD: add battery chip support.Zhang Jiejing
2012-02-13ENGR00174309:mx6/dl: gpu:enable 2d and 3dWu Guoxing
2012-02-13ENGR00174316 MX6Q ARM2: Fix ov5640_mipi IOMUX incorrect configureEven Xu
2012-02-13ENGR00174315 MX6Q max7310 set the default value of PCIE PWR ctrl2 to lowRichard Zhu
2012-02-13ENGR00174302 [MX6]Clean build warningAnson Huang
2012-02-10ENGR00170126 mx6q sabresd: add GPIO key deviceXinyu Chen
2012-02-10ENGR00174229-1 mx6q sabresd: add sensors devicesXinyu Chen
2012-02-10ENGR00173857 MX6Q: add 600M work pointZhang Jiejing
2012-02-10ENGR00174033-1 MX6 PCIE: add pcie RC driverRichard Zhu
2012-02-10ENGR00174128-2 Revert "Remove the discharge for VBUS and DP-2"Peter Chen
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 09:50:29 +0000