summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx6
AgeCommit message (Expand)Author
2013-05-04ENGR00261276 mx6sl: Fix build warningRobby Cai
2013-05-04ENGR00261060 mx6sl evk: make two BT modules configurable dynamicallyRobby Cai
2013-04-24ENGR00260082 mx6sl_evk: Change wm8962's MCLK to 24MHzNicolin Chen
2013-04-24ENGR00258491-4 msl-mx6: usb: fix clock unmatch problem after unload modulePeter Chen
2013-04-24ENGR00258491-2 msl-mx6: usb: put PHY to be out of low power explicitlyPeter Chen
2013-04-11ENGR00255733 MX6SL: Enable DISPLAY power gating only on TO1.2Robby Cai
2013-04-11ENGR00257130-6 mx6-msl: usb: Add 500us delay for phy stable timePeter Chen
2013-04-11ENGR00257130-5 mx6sl: Add config for USB ID as system wakeup sourcePeter Chen
2013-04-11ENGR00257130-4 mx6sl: different layout for stop_mode_configPeter Chen
2013-04-11ENGR00257130-2 msl: usb: Disable auto power PHY if usb wakeup disabledPeter Chen
2013-04-11ENGR00257130-1 mx6sl_evk: Add Host 1 vbus callbackPeter Chen
2013-03-21ENGR00237365: board-mx6q_sabreauto fix mipi-csi2 settingsAdrian Alonso
2013-03-20ENGR00254896 mx6: hdmidongle: Fix compile error.Zhang Xiaodong
2013-03-15ENGR00254457 mx6dl: fix mx6dl TO1.1 can't enter 'mem'Robin Gong
2013-03-14ENGR00254267 MX6DL/MX6SL max freq: Fix max cpu freq at 1G on MX6DL ARDRobin Gong
2013-03-12ENGR00253418 IMX6 SabreSD Display: Support LVDS1 and HDMI dual displayWayne Zou
2013-03-12ENGR00169384 imx6q: uart: config and enble uart5Jianzheng Zhou
2013-03-06ENGR00251209-6 msl-mx6: usb: keep the phy lower flag as true defaultlyPeter Chen
2013-03-06ENGR00251209-4 msl-mx6: usb: Fix system hang when unload gadget modulePeter Chen
2013-03-06ENGR00251209-3 usb: fix below build warningPeter Chen
2013-03-06ENGR00251209-1 usb: add host 1 vbus callbackPeter Chen
2013-03-04ENGR00237452 i.MX6:IEEE1588: disable phy Ar8031 SmartEEEFugang Duan
2013-03-01ENGR00252071-4: mxc_v4l2_capture: enable auto detect of ov5642/5640 in sabreliteSheng Nan
2013-03-01ENGR00252071-3: mxc_v4l2_capture: enable auto detect of ov5642/5640 in sabresdSheng Nan
2013-02-26ENGR00251849-2 ldo_bypass:print the ldo_bypass mode directly, not obscure numberRobin Gong
2013-02-26ENGR00251849-1 cpufreq:print the max freq directly, not obscure numberRobin Gong
2013-02-26ENGR00251630 MX6DQ: do not power off ARM in suspend on TO1.1Robin Gong
2013-02-14ENGR00244769-2 [NOR FLASH]-Improve WEIM NOR speedOliver Brown
2013-02-06ENGR00243348 imx: pcie: disable pcie phy in kernel initializationRichard Zhu
2013-02-05ENGR00243339 imx: sata: disable sata phy when sata is not enabledRichard Zhu
2013-02-05ENGR00243106 imx: pcie: enable pcie msi on imx6 platformsRichard Zhu
2013-01-31ENGR00242672 MX6 local timer:Remove enable_wait_mode global variableLiu Ying
2013-01-30ENGR00242269 MX6 PCIE:Print out link up failure logLiu Ying
2013-01-28ENGR00241003-1 mx6: need to add delay in LDO voltage settingAnson Huang
2013-01-21ENGR00240990 MX6 HDMI dongle:Configure HDMI PHY registersLiu Ying
2013-01-18ENGR00240650 pcie: imx: fix ep device no int when pcie switch is usedRichard Zhu
2013-01-14ENGR00239905 PCIe Enable PCIe switch supportRichard Zhu
2013-01-08ENGR00237364: board-mx6q_sabreauto fix adv7180 tvin powerdownAdrian Alonso
2013-01-08ENGR00232879 mx6sl: EPDC VDDH and VPOS power on/off sequence is wrongPeter Chan
2013-01-05ENGR00238307 MX6SL_EVK bluetooth: Add support to Silex SXSDMAN moduleLionel Xu
2013-01-05ENGR00238281 MX6SL_EVK: Add rfkill interface to bluetoothLionel Xu
2013-01-04ENGR00238809-1 mx6sl: clock: add dependency of IRAM clkGary Zhang
2012-12-21ENGR00237742 busfreq:fix IPG_PERCLK will be decreased to 6M once exit low busRobin Gong
2012-12-12ENGR00236837 MX6SL-Fix random crash caused by incorrect setting of IPG clk rate.Ranjani Vaidyanathan
2012-12-11ENGR00235817 mx6: use SNVS LPGPR register to store boot mode value.Zhang Jiejing
2012-12-06ENGR00236031 MX6 USB :Change default USB H1 and OTG driver load ordermake shi
2012-12-05ENGR00235624 Quad/DualLite ARD: MTD partition non alignedAlejandro Sierra
2012-12-05ENGR00235630 MX6 USB :fix USB does not work when plug in device during suspendmake shi
2012-11-29ENGR00235268: change caam_ipg_clk's CG to CG6Terry Lv
2012-11-29ENGR00223037 fsl: Add new board HDMI dongle for imx6 Q/DL.Zhang Xiaodong
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-29 18:25:54 +0000