summaryrefslogtreecommitdiff
path: root/arch/arm/plat-nomadik/include/plat
AgeCommit message (Collapse)Author
2012-04-05dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> cherry-picked from mainline commit 16052827d98fbc13c31ebad560af4bd53e2b4dd5 Change-Id: I929a49556539621a0546829e88b3caa498c94be2 Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-on: http://git-master/r/94463
2011-06-21net: remove mm.h inclusion from netdevice.hAlexey Dobriyan
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually). To prevent mm.h inclusion via other channels also extract "enum dma_data_direction" definition into separate header. This tiny piece is what gluing netdevice.h with mm.h via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h". Removal of mm.h from scatterlist.h was tried and was found not feasible on most archs, so the link was cutoff earlier. Hope people are OK with tiny include file. Note, that mm_types.h is still dragged in, but it is a separate story. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-09gpio/nomadik: fix sleepmode for elder NomadikLinus Walleij
The mach-nomadik machine did not compile properly due to bad ux500-specific functions being called. Introduce new state variables to fix this up. Reported-by: Axel Lin <axel.lin@gmail.com> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Prafulla Wadaskar <prafulla.wadaskar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-26gpio/nomadik: add function to read GPIO pull down statusRickard Andersson
Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Martin Persson <martin.persson@stericsson.com> [Split off from larger patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-25i2c-nomadik: fix speed enumeratorLinus Walleij
The I2C speed enumerators in the i2c-nomadik header file were in the wrong order. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-25i2c-nomadik: make i2c timeout specific per i2c busVirupax Sadashivpetimath
Add option to have different i2c timeout delay for different i2c buses specified in platform data. Default to the old value unless specified. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-22Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (66 commits) avr32: at32ap700x: fix typo in DMA master configuration dmaengine/dmatest: Pass timeout via module params dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCs fsldma: make halt behave nicely on all supported controllers fsldma: reduce locking during descriptor cleanup fsldma: support async_tx dependencies and automatic unmapping fsldma: fix controller lockups fsldma: minor codingstyle and consistency fixes fsldma: improve link descriptor debugging fsldma: use channel name in printk output fsldma: move related helper functions near each other dmatest: fix automatic buffer unmap type drivers, pch_dma: Fix warning when CONFIG_PM=n. dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize dw_dmac: Setting Default Burst length for transfers as 16. dw_dmac: Allow src/dst msize & flow controller to be configured at runtime dw_dmac: Changing type of src_master and dest_master to u8. dw_dmac: Pass Channel Priority from platform_data dw_dmac: Pass Channel Allocation Order from platform_data ...
2011-03-14plat-nomadik: make GPIO interrupts work with cpuidle ApSleepRabin Vincent
Enable wakeups by default for any GPIO interrupts and in the suspend/resume path narrow this down to only the the real wakeup interrupts. This approach is based on the assumption that cpuidle ApSleep will be entered more often than system suspend. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> [Fixup for genirq changes to struct irq_data on 2.6.38] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: implement safe switch sequence for Alt-CRabin Vincent
Setting pinmux alternative C for a GPIO pin is actually not so easy since it ivolves setting value "1" in two registers, and since the combined result will take effect for intermediate values (01 or 10) this will cause glitches while you wrote one register but have not yet written the other. This patch implements a series of kludges including an optional machine-specific callback to avoid glitches when changing pin mux mode to alternative C. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: support secondary GPIO interruptsRabin Vincent
When GPIOs wake up the system from sleep mode, the normal GPIO interrupt handler does not hit and the normal interrupt status register does not contain the status. Instead the secondary GPIO handler does, and the interrupt status needs to be retrieved from the wakeup status saved by the suspend/resume code. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: support varying number of GPIOs per blockRabin Vincent
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Added constant 32-pin assignment in platform data] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-01-30dma40: remove export of stedma40_memcpy_sgRabin Vincent
The dmaengine framework has the API for this now. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: allow realtime and priority for event linesRabin Vincent
DB8500v2's DMA40 (revision 3) allows setting event lines as high priority and real time. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-17Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (63 commits) ARM: PL08x: cleanup comments Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c ARM: PL08x: fix a warning Fix dmaengine_submit() return type dmaengine: at_hdmac: fix race while monitoring channel status dmaengine: at_hdmac: flags located in first descriptor dmaengine: at_hdmac: use subsys_initcall instead of module_init dmaengine: at_hdmac: no need set ACK in new descriptor dmaengine: at_hdmac: trivial add precision to unmapping comment dmaengine: at_hdmac: use dma_address to program DMA hardware pch_dma: support new device ML7213 IOH ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels ARM: PL08x: allow dma_set_runtime_config() to return errors ARM: PL08x: fix locking between prepare function and submit function ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels ARM: PL08x: put txd's on the pending list in pl08x_tx_submit() ARM: PL08x: rename 'desc_list' as 'pend_list' ARM: PL08x: implement unmapping of memcpy buffers ARM: PL08x: store prep_* flags in async_tx structure ARM: PL08x: shrink srcbus/dstbus in txd structure ...
2011-01-04dmaengine: dma40: Add support to split up large elementsPer Forlin
The maximum transfer size of the stedma40 is (64k-1) x data-width. If the transfer size of one element exceeds this limit the job is split up and sent as linked transfer. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-12-08nomadik-gpio: allow sleep mode dir/pull to differ from normal modeRabin Vincent
In the nomadik GPIO pin configuration, allow the sleep mode direction and pull configurations to differ from the ones for the normal state. PIN_SLPM_PULL_*, PIN_SLPM_INPUT, PIN_SLPM_OUTPUT* macros are provided for this. Since the hardware does not allow seperate configurations for sleep mode and normal mode, this is implemented by having software remux the configurations as necessary. Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-27Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits) DMAENGINE: move COH901318 to arch_initcall dma: imx-dma: fix signedness bug dma/timberdale: simplify conditional ste_dma40: remove channel_type ste_dma40: remove enum for endianess ste_dma40: remove TIM_FOR_LINK option ste_dma40: move mode_opt to separate config ste_dma40: move channel mode to a separate field ste_dma40: move priority to separate field ste_dma40: add variable to indicate valid dma_cfg async_tx: make async_tx channel switching opt-in move async raid6 test to lib/Kconfig.debug dmaengine: Add Freescale i.MX1/21/27 DMA driver intel_mid_dma: change the slave interface intel_mid_dma: fix the WARN_ONs intel_mid_dma: Add sg list support to DMA driver intel_mid_dma: Allow DMAC2 to share interrupt intel_mid_dma: Allow IRQ sharing intel_mid_dma: Add runtime PM support DMAENGINE: define a dummy filter function for ste_dma40 ...
2010-10-27Remove duplicate includes from many filesZimny Lech
Signed-off-by: Zimny Lech <napohybelskurwysynom2010@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-19ste_dma40: remove channel_typeRabin Vincent
It has been replaced with separate fields. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: remove enum for endianessRabin Vincent
A bool will suffice. The default is little endian. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: remove TIM_FOR_LINK optionRabin Vincent
This does not seem to be implemented. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move mode_opt to separate configRabin Vincent
Defaults are "basic mode" for physical channels, and "logical source logical destination" for logical channels. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move channel mode to a separate fieldRabin Vincent
And keep it logical by default. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move priority to separate fieldRabin Vincent
And keep it low priority by default. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-13Input: add support for Nomadik SKE keypad controllerSundar Iyer
Add support for the keypad controller in the Scroll Key Encoder (SKE) module on the Nomadik family and the DB8500 SoC. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-07DMAENGINE: define a dummy filter function for ste_dma40Linus Walleij
All platform data has to be made conditional on CONFIG_STEDMA40 or we can provide a simple dummy filter functions as to avoid cluttering the code with other #ifdef:s. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07DMAENGINE: Remove stedma40_set_psize and pre_transfer hook in ste_dma40Per Forlin
Remove obsolete pre_transfer hook in stedma40_chan_cfg. The intent of this hook is merely to handle burst size compensation for ux500 variant MMCI. Remove obsolete stedma40_set_psize since it is only called from pre_transfer. DMAEngine device_control replaces the functionality of stedma40_set_psize. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: added kernel doc for structJonas Aaberg
The half-channel struct was undocumented. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: removed non-used variable from structJonas Aaberg
The reqrite of the LCLA code rendered this variable unused. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: code clean-upJonas Aaberg
This patch includes non functional code clean up changes, file header updates and a few magic numbers got defined. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: config checksLinus Walleij
Added various configuration checks. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-02ARM: 6354/1: nomadik-gpio: allow control of sleep mode direction and pull upRabin Vincent
DB8500v2 allows control of direction and pull up/down configuration in sleep mode, instead of switching the pin to input with pull up/down enabled. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6353/1: nomadik-gpio: add SLPM register handing for DB8500v2Rabin Vincent
The SLPM register enables/disables wakeup detection on DB8500v2. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-09Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (30 commits) DMAENGINE: at_hdmac: locking fixlet DMAENGINE: pch_dma: kill another usage of __raw_{read|write}l dma: dmatest: fix potential sign bug ioat2: catch and recover from broken vtd configurations v6 DMAENGINE: add runtime slave control to COH 901 318 v3 DMAENGINE: add runtime slave config to DMA40 v3 DMAENGINE: generic slave channel control v3 dmaengine: Driver for Topcliff PCH DMA controller intel_mid: Add Mrst & Mfld DMA Drivers drivers/dma: Eliminate a NULL pointer dereference dma/timb_dma: compile warning on 32 bit DMAENGINE: ste_dma40: support older silicon DMAENGINE: ste_dma40: support disabling physical channels DMAENGINE: ste_dma40: no disabled phy channels on ux500 DMAENGINE: ste_dma40: fix suspend bug DMAENGINE: ste_dma40: add DB8500 memcpy channels DMAENGINE: ste_dma40: no flow control on memcpy DMAENGINE: ste_dma40: arch updates for LCLA and LCPA DMAENGINE: ste_dma40: allocate LCLA dynamically DMAENGINE: ste_dma40: no premature stop ... Fix up trivial conflicts in arch/arm/mach-ux500/devices-db8500.c
2010-06-22DMAENGINE: ste_dma40: no disabled phy channels on ux500Jonas Aaberg
Make sure we have no disabled physical channels when we start on the ux500 machines. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-16ARM: 6153/1: nomadik MTU to use dynamic shift and mult assignmentLinus Walleij
This removes the hard-coded shift values for the MTU timer, since the different platforms using this has very different running frequencies doing this dynamically is a better idea. Also take this opportunity to make a more through shutdown of the MTU clockevent when requested. Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-16ARM: 6155/1: nomadik-gpio: add pin configuration APIRabin Vincent
Add a pin configuration API to all pin-related configuration to be specified with a single macro and groups of pins to be configured at one go. Based on the PXA MFP implementation. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-16ARM: 6149/1: nomadik-gpio: add function to configure sleep mode behaviourRabin Vincent
Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-16ARM: 6148/1: nomadik-gpio: add function to configure pullup/pulldownRabin Vincent
Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: extend the control command to include an arg async_tx: trim dma_async_tx_descriptor in 'no channel switch' case DMAENGINE: DMA40 fix for allocation of logical channel 0 DMAENGINE: DMA40 support paused channel status dmaengine: mpc512x: Use resource_size DMA ENGINE: Do not reset 'private' of channel ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device ioat3: disable cacheline-unaligned transfers for raid operations ioat2,3: convert to producer/consumer locking ioat: convert to circ_buf DMAENGINE: Support for ST-Ericssons DMA40 block v3 async_tx: use of kzalloc/kfree requires the include of slab.h dmaengine: provide helper for setting txstate DMAENGINE: generic channel status v2 DMAENGINE: generic slave control v2 dma: timb-dma: Update comment and fix compiler warning dma: Add timb-dma DMAENGINE: COH 901 318 fix bytesleft DMAENGINE: COH 901 318 rename confusing vars
2010-04-14DMAENGINE: Support for ST-Ericssons DMA40 block v3Linus Walleij
This is a straightforward driver for the ST-Ericsson DMA40 DMA controller found in U8500, implemented akin to the existing COH 901 318 driver. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com> Cc: STEricsson_nomadik_linux@list.st.com Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-19ARM: 5972/1: nomadik-gpio: convert to platform driverRabin Vincent
On the U8500 platform there are four GPIO blocks, each with a 4K address space, including the peripheral identification. However, each of these blocks have a varying number of banks, each of which have 32 GPIOs and an interrupt line. The current nomadik-gpio driver implementation can handle each of these sub-banks easily with one instance each, but cannot as-is be hooked up to them because it is an AMBA driver and it expects to see a peripheral with the appropriate peripheral ids but having only one bank and only one interrupt. Solve this by converting the driver to a platform driver. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19ARM: 5969/1: nomadik: move gpio to plat-nomadikRabin Vincent
Move the Nomadik GPIO driver to plat-nomadik so that it can also be used on the Ux500 platform. The mach-nomadik include/mach/gpio.h is replaced by one that includes the one now in plat-nomadik, so that code doesn't need to include the one in plat specifically, and can instead use <linux/gpio.h> as usual. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-04ARM: 5908/1: nomadik: add platform specific i2c configurationSrinidhi Kasagar
This adds the platform specific i2c configuration data structures to setup the nomadik/ux500 i2c block. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-28ARM: 5786/1: Introduce plat-nomadik, MTU code re-organizationSrinidhi Kasagar
Introduce the plat-nomadik folder for ST-Ericsson machines including the existing nomadik 8815 architecture. This also moves the existing MTU (MultiTimerUnit) of nomadik 8815 to the proposed plat-nomadik and adds HAS_MTU. The patch has been re-based to 2.6.32-rc6 Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-30 03:19:55 +0000