summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf548/boards/cm_bf548.c
AgeCommit message (Collapse)Author
2014-04-12blackfin: cleanup board filesSteven Miao
using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE) Signed-off-by: Steven Miao <realmz6@gmail.com>
2012-05-21blackfin: twi: Move TWI peripheral pin request array to platform dataSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09blackfin: config: update macro SPI_BFIN in board fileSonic Zhang
Macro name for spi controller driver has been modified, so update default board file accordingly. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14Blackfin: add serial TX IRQ in individual platform resourceSonic Zhang
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips, so move the values to the platform resources. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-07-23Blackfin: boards: clean up redundant/dead spi resourcesMike Frysinger
The default for the Blackfin SPI driver is 8 bits and dma disabled, so many of the bfin5xx_spi_chip resources are redundant. So punt those parts. Further, drivers should themselves be declaring 16 bit transfers, so for those that do, and for the ones which no longer do 16 bit transfers, drop the bfin5xx_spi_chip resources. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: boards: add missing "static" to peripheral listsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: sport_uart resources: remove unused secondary RX/TX pinsSonic Zhang
The SPORT/UART driver doesn't use the secondary channel pins, so don't try and request them thus keeping other drivers from using them. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: musb-boards: push clkin value to platform resourcesBob Liu
In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-12-10usb: musb: split blackfin to its own platform_driverFelipe Balbi
Just adding its own platform_driver, not really using it yet. Later patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: trivial search and replace patchFelipe Balbi
change all ocurrences of musb_hdrc to musb-hdrc. We will call glue layer drivers musb-<glue layer>, so in order to keep things somewhat standard, let's change the underscore into a dash. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01usb: musb: add names for IRQs in structure resourceHema Kalliguddi
Soon resource data will get automatically populated from a set of autogenerated data from TI's hardware database for the OMAP platform. Such database, might not have resources at the expected order by the current drivers. While we could hack in some exceptions to that tool to generate resources in a specific order, it seems less fragile to use the resource name instead. That way, no matter what order the resources are generated, the driver still work. Modified the OMAP, Blackfin and Davinci architecture files to add the name of the IRQs in the resource structures and musb driver to use the platform_get_irq_byname() api to get the device and dma irq numbers instead of using the index. Cc: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-10-22Blackfin: boards: fix num_chipselect values for on-chip SPI busesMike Frysinger
The num_chipselect field for on-chip Blackfin SPI buses is supposed to be 1 larger than the number of actual CSs available. This is because the hardware starts counting at 1 and not 0. There is a field for "CS0", but it is marked as "reserved" everywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: cm-bf548: add support for Socket CANMichael Hennerich
Add platform resources for the on-chip CAN peripheral so we can use it. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-27Blackfin: bf52x/bf54x boards: drop unused nand page sizeBarry Song
Now that the driver for the Blackfin on-chip NFC no longer uses/respects the page_size from the platform resources (figures out the needs on the fly), drop it from the platform resources. This fixes some build errors since the defines no longer exists. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21Blackfin: mark MUSB VRSEL as active high for appropriate boardsCliff Cai
These boards all have the GPIO VRSEL hooked up as an active high. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add UART/SPORT early platform resourcesSonic Zhang
This lets people easily select the UART/SPORT consoles for early printk while leveraging the pins declared in the boards file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move SPORT UART resources to boards filesSonic Zhang
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal emulated UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move on-chip UART resources to boards filesSonic Zhang
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08Blackfin: drop all simple-gpio board resourcesMike Frysinger
The simple-gpio has been replaced by the gpio sysfs interface, so drop the unused simple-gpio resources from all Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08Blackfin: drop cs_change_per_word settingMike Frysinger
Structs get initialized to 0 already, and we want to punt this field, so scrub it from all of our boards. Reported-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: update cm board resourcesHarald Krapfenbauer
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: fix BF54x SPI CS resourcesYi Li
The BF54x has three slave select signals for SPI0/SPI1, not eight. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: define SPI IRQ in board resourcesYi Li
The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-07Blackfin arch: fix bug: kernel crash when enable SDIO host driverMike Frysinger
update bfin-sdh platform data to fix this issue. Pointed-out-by: Dominik Herwald <d.herwald@dsh-elektronik.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Fix bug - wrong endpoint number and dma channels of USBBryan Wu
Blackfin MUSB has 8 endpoints including ep0 and 8 dma channels not 7 Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: add simple-gpio resources to all adi/tinyboardsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: use physmap in board resources rather than legacy config methodMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: enable i2c_bfin_twi0_device in cm_bf548 boardMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: flags of UART3 mem resource is missingSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-13Blackfin arch: only include asm/cplb.h when it is truly usedMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: use new platform data interface of musb to replace old oneBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-27Blackfin arch: move include/asm-blackfin header files to arch/blackfinBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-05Blackfin arch: be consistant with parition names, and ensure the bus is ↵Robin Getz
identified Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-20Blackfin arch: Cleanup no functional changesMichael Hennerich
Singed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-10[Blackfin] arch: protect linux/usb/musb.h include until the driver gets ↵Mike Frysinger
mainlined Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: Functional power management support: Add CPU and platform ↵Michael Hennerich
voltage scaling support Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: add Blackfin on-chip SIR IrDA driver supportGraf Yang
- add platform device resources in board files - add new bfin_sir.h to each machines Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Apply Bluetechnix vendor patchMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-27 00:53:29 +0000