summaryrefslogtreecommitdiff
path: root/arch/openrisc
AgeCommit message (Collapse)Author
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel Pull Hexagon fixes from Richard Kuo: "Changes for the Hexagon architecture (and one touching OpenRISC). They include various fixes to make use of additional arch features and cleanups. The largest functional change is a cleanup of the signal and event return paths" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: (32 commits) Hexagon: add v4 CS regs to core copyout macro Hexagon: use correct translation for VMALLOC_START Hexagon: use correct translations for DMA mappings Hexagon: fix return value for notify_resume case in do_work_pending Hexagon: fix signal number for user mem faults Hexagon: remove two Kconfig entries arch: remove CONFIG_GENERIC_FIND_NEXT_BIT again Hexagon: update copyright dates Hexagon: add translation types for __vmnewmap Hexagon: fix signal.c compile error Hexagon: break up user fn/arg register setting Hexagon: use generic sys_fork, sys_vfork, and sys_clone Hexagon: fix psp/sp macro Hexagon: fix up int enable/disable at ret_from_fork Hexagon: add IOMEM and _relaxed IO macros Hexagon: switch to using the device type for IO mappings Hexagon: don't print info for offline CPU's Hexagon: add support for single-stepping (v4+) Hexagon: use correct work mask when checking for more work Hexagon: add support for additional exceptions ...
2013-04-30arch: remove CONFIG_GENERIC_FIND_NEXT_BIT againPaul Bolle
CONFIG_GENERIC_FIND_NEXT_BIT was removed in v3.0, but reappeared in two architectures. Remove it again. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
2013-04-30dump_stack: unify debug information printed by show_regs()Tejun Heo
show_regs() is inherently arch-dependent but it does make sense to print generic debug information and some archs already do albeit in slightly different forms. This patch introduces a generic function to print debug information from show_regs() so that different archs print out the same information and it's much easier to modify what's printed. show_regs_print_info() prints out the same debug info as dump_stack() does plus task and thread_info pointers. * Archs which didn't print debug info now do. alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r, metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc, um, xtensa * Already prints debug info. Replaced with show_regs_print_info(). The printed information is superset of what used to be there. arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86 * s390 is special in that it used to print arch-specific information along with generic debug info. Heiko and Martin think that the arch-specific extra isn't worth keeping s390 specfic implementation. Converted to use the generic version. Note that now all archs print the debug info before actual register dumps. An example BUG() dump follows. kernel BUG at /work/os/work/kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... v2: Typo fix in x86-32. v3: CPU number dropped from show_regs_print_info() as dump_stack_print_info() has been updated to print it. s390 specific implementation dropped as requested by s390 maintainers. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30dump_stack: consolidate dump_stack() implementations and unify their behaviorsTejun Heo
Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP/hotplug changes from Ingo Molnar: "This is a pretty large, multi-arch series unifying and generalizing the various disjunct pieces of idle routines that architectures have historically copied from each other and have grown in random, wildly inconsistent and sometimes buggy directions: 101 files changed, 455 insertions(+), 1328 deletions(-) this went through a number of review and test iterations before it was committed, it was tested on various architectures, was exposed to linux-next for quite some time - nevertheless it might cause problems on architectures that don't read the mailing lists and don't regularly test linux-next. This cat herding excercise was motivated by the -rt kernel, and was brought to you by Thomas "the Whip" Gleixner." * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) idle: Remove GENERIC_IDLE_LOOP config switch um: Use generic idle loop ia64: Make sure interrupts enabled when we "safe_halt()" sparc: Use generic idle loop idle: Remove unused ARCH_HAS_DEFAULT_IDLE bfin: Fix typo in arch_cpu_idle() xtensa: Use generic idle loop x86: Use generic idle loop unicore: Use generic idle loop tile: Use generic idle loop tile: Enter idle with preemption disabled sh: Use generic idle loop score: Use generic idle loop s390: Use generic idle loop powerpc: Use generic idle loop parisc: Use generic idle loop openrisc: Use generic idle loop mn10300: Use generic idle loop mips: Use generic idle loop microblaze: Use generic idle loop ...
2013-04-29mm/openrisc: use common help functions to free reserved pagesJiang Liu
Use common help functions to free reserved pages. Also include <asm/sections.h> to avoid local declarations. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jonas Bonn <jonas@southpole.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17idle: Remove GENERIC_IDLE_LOOP config switchThomas Gleixner
All archs are converted over. Remove the config switch and the fallback code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-16Remove GENERIC_GPIO config optionAlexandre Courbot
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-08openrisc: Use generic idle loopThomas Gleixner
Idle poller with an extra check_pgt_cache() invocation. Use the core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130321215234.886530981@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08arch: Consolidate tsk_is_polling()Thomas Gleixner
Move it to a common place. Preparatory patch for implementing set/clear for the idle need_resched poll implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130321215233.446034505@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-20openrisc: default GENERIC_GPIO to falseAlexandre Courbot
This is one step towards the removal of the GENERIC_GPIO option. OpenRISC mandates the use of GPIOLIB, which enables GENERIC_GPIO anyway, so this patch should be a no-op. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonas Bonn <jonas@southpole.se>
2013-03-13openrisc: remove HAVE_VIRT_TO_BUSJonas Bonn
The OpenRISC arch doesn't actually have the virt_to_bus methods Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-03-13openrisc: require gpiolibJonas Bonn
The recent move to GPIO descriptors breaks the OpenRISC build. Requiring gpiolib resolves this; using gpiolib exclusively is also the recommended way forward for all arches by the developers working on these GPIO changes. The non-gpiolib implementation for OpenRISC never worked anyway... Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-03-12Select VIRT_TO_BUS directly where neededStephen Rothwell
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUSStephen Rothwell
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26Merge branch 'for-upstream' of git://openrisc.net/jonas/linuxLinus Torvalds
Pull OpenRISC updates from Jonas Bonn: "An equal number of bug fixes and trivial cleanups; no new features. - Two patches to fix errors thrown by the updated toolchain. - Three other bug fixes. - Four trivial cleanups." * 'for-upstream' of git://openrisc.net/jonas/linux: openrisc: add missing header inclusion openrisc: really pass correct arg to schedule_tail Add bitops include needed for ext2 filesystem openrisc: update DTLB-miss handler last openrisc: fix up vmalloc page table loading openrisc idle: delete pm_idle openrisc: remove CONFIG_SYMBOL_PREFIX openrisc: avoid using function parameter regs in reset vector openrisc: remove unused current_regs
2013-02-26default SET_PERSONALITY() in linux/elf.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-26openrisc: add missing header inclusionStefan Kristiansson
Prevents build issue with updated toolchain Reported-by: Jack Thomasson <jkt@moonlitsw.com> Tested-by: Christian Svensson <blue@cmd.nu> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "This is the first pile; another one will come a bit later and will contain SYSCALL_DEFINE-related patches. - a bunch of signal-related syscalls (both native and compat) unified. - a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE (fixing several potential problems with missing argument validation, while we are at it) - a lot of now-pointless wrappers killed - a couple of architectures (cris and hexagon) forgot to save altstack settings into sigframe, even though they used the (uninitialized) values in sigreturn; fixed. - microblaze fixes for delivery of multiple signals arriving at once - saner set of helpers for signal delivery introduced, several architectures switched to using those." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits) x86: convert to ksignal sparc: convert to ksignal arm: switch to struct ksignal * passing alpha: pass k_sigaction and siginfo_t using ksignal pointer burying unused conditionals make do_sigaltstack() static arm64: switch to generic old sigaction() (compat-only) arm64: switch to generic compat rt_sigaction() arm64: switch compat to generic old sigsuspend arm64: switch to generic compat rt_sigqueueinfo() arm64: switch to generic compat rt_sigpending() arm64: switch to generic compat rt_sigprocmask() arm64: switch to generic sigaltstack sparc: switch to generic old sigsuspend sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE sparc: kill sign-extending wrappers for native syscalls kill sparc32_open() sparc: switch to use of generic old sigaction sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE mips: switch to generic sys_fork() and sys_clone() ...
2013-02-17openrisc idle: delete pm_idleLen Brown
pm_idle() on openrisc was dead code. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux@lists.openrisc.net
2013-02-17openrisc: really pass correct arg to schedule_tailJonas Bonn
Commit 287ad220cd8b5a9d29f71c78f6e4051093f051fc tried to set up the argument to schedule_tail, but ended up using TI_STACK which isn't a defined symbol. Sadly, the old openrisc compiler silently ignores this fact and it was first discovered now when building with an updated toolchain. Reported-by: Christian Svensson <blue@cmd.nu> Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-17Add bitops include needed for ext2 filesystemSebastian Macke
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-17openrisc: update DTLB-miss handler lastJonas Bonn
The self-modifying code that updates the TLB handler at start-up has a subtle ordering requirement: the DTLB handler must be the last thing changed. What I was seeing was the following: i) The DTLB handler was updated ii) The following printk caused a TLB miss and the look-up resulted in the page containing itlb_vector (0xc0000a00) being bounced from the TLB. iii) The subsequent access to itlb_vector caused a TLB miss and reload of the page containing itlb_vector from the page tables. iv) But this reload of the page in iii) was being done by the "new" DTLB-miss handler which resulted (correctly) in the page flags being set to read-only; the subsequent write-access to itlb_vector thus resulted in a page (access) fault. This is easily remedied if we ensure that the boot-time DTLB-miss handler continues running until the very last bit of self-modifying code has been executed. This patch should ensure that the very last thing updated is the DTLB-handler itself. Signed-off-by: Jonas Bonn <jonas@southpole.se> Acked-by: Julius Baxter <juliusbaxter@gmail.com> Tested-by: Sebastian Macke <sebastian@macke.de>
2013-02-14openrisc: fix up vmalloc page table loadingJonas Bonn
vmalloc'ed pages are faulted into a process' page tables on demand. In order to facilitate this, do_page_fault needs to know whether it was called via a page fault exception or a TLB-miss exception. This patch adds a wrapper around the _x_page_fault_handler entry points that the TLB-miss exceptions can call into in order to have the relevant parameter set to satisfy do_page_fault. This fixes a bug and is "good enough" for now. That said, this whole handling of vmalloc needs to be audited for correctness at some point. Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-14burying unused conditionalsAl Viro
__ARCH_WANT_SYS_RT_SIGACTION, __ARCH_WANT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} - can be assumed always set.
2013-02-10openrisc idle: delete pm_idleLen Brown
pm_idle() on openrisc was dead code. Signed-off-by: Len Brown <len.brown@intel.com> Cc: linux@lists.openrisc.net Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-10openrisc: remove CONFIG_SYMBOL_PREFIXJames Hogan
Remove the SYMBOL_PREFIX Kconfig symbol as it's empty anyway. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: linux@lists.openrisc.net Cc: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-10openrisc: avoid using function parameter regs in reset vectorStefan Kristiansson
The kernel might be invoked through the reset vector, so to preserve parameters passed to it, temp regs that are not in the function parameter range needs to be used. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-10openrisc: remove unused current_regsJonas Bonn
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-03openrisc: switch to generic sigaltstackAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-03ARCH: drivers remove __dev* attributes.Greg Kroah-Hartman
This fixes up all of the smaller arches that had __dev* markings for their platform-specific drivers. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Bob Liu <lliubbo@gmail.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Myron Stowe <myron.stowe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Jan Glauber <jang@linux.vnet.ibm.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-21Merge tag 'asm-generic' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanup from Arnd Bergmann: "These are a few cleanups for asm-generic: - a set of patches from Lars-Peter Clausen to generalize asm/mmu.h and use it in the architectures that don't need any special handling. - A patch from Will Deacon to remove the {read,write}s{b,w,l} as discussed during the arm64 review - A patch from James Hogan that helps with the meta architecture series." * tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: xtensa: Use generic asm/mmu.h for nommu h8300: Use generic asm/mmu.h c6x: Use generic asm/mmu.h asm-generic/mmu.h: Add support for FDPIC asm-generic/mmu.h: Remove unused vmlist field from mm_context_t asm-generic: io: remove {read,write} string functions asm-generic/io.h: remove asm/cacheflush.h include
2012-12-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull signal handling cleanups from Al Viro: "sigaltstack infrastructure + conversion for x86, alpha and um, COMPAT_SYSCALL_DEFINE infrastructure. Note that there are several conflicts between "unify SS_ONSTACK/SS_DISABLE definitions" and UAPI patches in mainline; resolution is trivial - just remove definitions of SS_ONSTACK and SS_DISABLED from arch/*/uapi/asm/signal.h; they are all identical and include/uapi/linux/signal.h contains the unified variant." Fixed up conflicts as per Al. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: alpha: switch to generic sigaltstack new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those generic compat_sys_sigaltstack() introduce generic sys_sigaltstack(), switch x86 and um to it new helper: compat_user_stack_pointer() new helper: restore_altstack() unify SS_ONSTACK/SS_DISABLE definitions new helper: current_user_stack_pointer() missing user_stack_pointer() instances Bury the conditionals from kernel_thread/kernel_execve series COMPAT_SYSCALL_DEFINE: infrastructure
2012-12-19Bury the conditionals from kernel_thread/kernel_execve seriesAl Viro
All architectures have CONFIG_GENERIC_KERNEL_THREAD CONFIG_GENERIC_KERNEL_EXECVE __ARCH_WANT_SYS_EXECVE None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers of kernel_execve() (which is a trivial wrapper for do_execve() now) left. Kill the conditionals and make both callers use do_execve(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-18Merge tag 'for-3.8' of git://openrisc.net/~jonas/linuxLinus Torvalds
Pull OpenRISC update from Jonas Bonn: "Trivial cleanups for OpenRISC." * tag 'for-3.8' of git://openrisc.net/~jonas/linux: openrisc: use kbuild.h instead of defining macros in asm-offset.c openrisc: Use Kbuild infrastructure for kvm_para.h
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
2012-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull big execve/kernel_thread/fork unification series from Al Viro: "All architectures are converted to new model. Quite a bit of that stuff is actually shared with architecture trees; in such cases it's literally shared branch pulled by both, not a cherry-pick. A lot of ugliness and black magic is gone (-3KLoC total in this one): - kernel_thread()/kernel_execve()/sys_execve() redesign. We don't do syscalls from kernel anymore for either kernel_thread() or kernel_execve(): kernel_thread() is essentially clone(2) with callback run before we return to userland, the callbacks either never return or do successful do_execve() before returning. kernel_execve() is a wrapper for do_execve() - it doesn't need to do transition to user mode anymore. As a result kernel_thread() and kernel_execve() are arch-independent now - they live in kernel/fork.c and fs/exec.c resp. sys_execve() is also in fs/exec.c and it's completely architecture-independent. - daemonize() is gone, along with its parts in fs/*.c - struct pt_regs * is no longer passed to do_fork/copy_process/ copy_thread/do_execve/search_binary_handler/->load_binary/do_coredump. - sys_fork()/sys_vfork()/sys_clone() unified; some architectures still need wrappers (ones with callee-saved registers not saved in pt_regs on syscall entry), but the main part of those suckers is in kernel/fork.c now." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (113 commits) do_coredump(): get rid of pt_regs argument print_fatal_signal(): get rid of pt_regs argument ptrace_signal(): get rid of unused arguments get rid of ptrace_signal_deliver() arguments new helper: signal_pt_regs() unify default ptrace_signal_deliver flagday: kill pt_regs argument of do_fork() death to idle_regs() don't pass regs to copy_process() flagday: don't pass regs to copy_thread() bfin: switch to generic vfork, get rid of pointless wrappers xtensa: switch to generic clone() openrisc: switch to use of generic fork and clone unicore32: switch to generic clone(2) score: switch to generic fork/vfork/clone c6x: sanitize copy_thread(), get rid of clone(2) wrapper, switch to generic clone() take sys_fork/sys_vfork/sys_clone prototypes to linux/syscalls.h mn10300: switch to generic fork/vfork/clone h8300: switch to generic fork/vfork/clone tile: switch to generic clone() ... Conflicts: arch/microblaze/include/asm/Kbuild
2012-12-11Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Lots of activity: 211 files changed, 8328 insertions(+), 4116 deletions(-) most of it on the tooling side. Main changes: * ftrace enhancements and fixes from Steve Rostedt. * uprobes fixes, cleanups and preparation for the ARM port from Oleg Nesterov. * UAPI fixes, from David Howels - prepares the arch/x86 UAPI transition * Separate perf tests into multiple objects, one per test, from Jiri Olsa. * Make hardware event translations available in sysfs, from Jiri Olsa. * Fixes to /proc/pid/maps parsing, preparatory to supporting data maps, from Namhyung Kim * Implement ui_progress for GTK, from Namhyung Kim * Add framework for automated perf_event_attr tests, where tools with different command line options will be run from a 'perf test', via python glue, and the perf syscall will be intercepted to verify that the perf_event_attr fields set by the tool are those expected, from Jiri Olsa * Add a 'link' method for hists, so that we can have the leader with buckets for all the entries in all the hists. This new method is now used in the default 'diff' output, making the sum of the 'baseline' column be 100%, eliminating blind spots. * libtraceevent fixes for compiler warnings trying to make perf it build on some distros, like fedora 14, 32-bit, some of the warnings really pointed to real bugs. * Add a browser for 'perf script' and make it available from the report and annotate browsers. It does filtering to find the scripts that handle events found in the perf.data file used. From Feng Tang * perf inject changes to allow showing where a task sleeps, from Andrew Vagin. * Makefile improvements from Namhyung Kim. * Add --pre and --post command hooks in 'stat', from Peter Zijlstra. * Don't stop synthesizing threads when one vanishes, this is for the existing threads when we start a tool like trace. * Use sched:sched_stat_runtime to provide a thread summary, this produces the same output as the 'trace summary' subcommand of tglx's original "trace" tool. * Support interrupted syscalls in 'trace' * Add an event duration column and filter in 'trace'. * There are references to the man pages in some tools, so try to build Documentation when installing, warning the user if that is not possible, from Borislav Petkov. * Give user better message if precise is not supported, from David Ahern. * Try to find cross-built objdump path by using the session environment information in the perf.data file header, from Irina Tirdea, original patch and idea by Namhyung Kim. * Diplays more output on features check for make V=1, so that one can figure out what is happening by looking at gcc output, etc. From Jiri Olsa. * Add on_exit implementation for systems without one, e.g. Android, from Bernhard Rosenkraenzer. * Only process events for vcpus of interest, helps handling large number of events, from David Ahern. * Cross compilation fixes for Android, from Irina Tirdea. * Add documentation on compiling for Android, from Irina Tirdea. * perf diff improvements from Jiri Olsa. * Target (task/user/cpu/syswide) handling improvements, from Namhyung Kim. * Add support in 'trace' for tracing workload given by command line, from Namhyung Kim. * ... and much more." * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (194 commits) uprobes: Use percpu_rw_semaphore to fix register/unregister vs dup_mmap() race perf evsel: Introduce is_group_member method perf powerpc: Use uapi/unistd.h to fix build error tools: Pass the target in descend tools: Honour the O= flag when tool build called from a higher Makefile tools: Define a Makefile function to do subdir processing perf ui: Always compile browser setup code perf ui: Add ui_progress__finish() perf ui gtk: Implement ui_progress functions perf ui: Introduce generic ui_progress helper perf ui tui: Move progress.c under ui/tui directory perf tools: Add basic event modifier sanity check perf tools: Omit group members from perf_evlist__disable/enable perf tools: Ensure single disable call per event in record comand perf tools: Fix 'disabled' attribute config for record command perf tools: Fix attributes for '{}' defined event groups perf tools: Use sscanf for parsing /proc/pid/maps perf tools: Add gtk.<command> config option for launching GTK browser perf tools: Fix compile error on NO_NEWT=1 build perf hists: Initialize all of he->stat with zeroes ...
2012-12-11Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Pull device tree changes from Grant Likely: "Here are the DT changes I've got queued up for v3.8. As described below, there are a lot of bug fixes here and documentation updates but nothing major: Bug fixes, little cleanups, and documentation changes. The most invasive thing here touches a bunch of the arch directories to use a common build rule for .dtb files. There are no major changes to functionality here other than a few new helper functions." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits) arm64: Fix the dtbs target building mtd: nand: davinci: fix the binding documentation rtc: rtc-mv: Add the device tree binding documentation devicetree/bindings: Move gpio-leds binding into leds directory of/vendor-prefixes: add Imagination Technologies microblaze: use new common dtc rule c6x: use new common dtc rule openrisc: use new common dtc rule arm64: Add dtbs target for building all the enabled dtb files arm64: use new common dtc rule ARM: dt: change .dtb build rules to build in dts directory kbuild: centralize .dts->.dtb rule Fix build when CONFIG_W1_MASTER_GPIO=m b exporting "allnodes" of/spi: Honour "status=disabled" property of device of_mdio: Honour "status=disabled" property of device of_i2c: Honour "status=disabled" property of device powerpc: Fix fallout from device_node->name constification of: add 'const' for of_parse_phandle parameter *np Documentation: correct of_platform_populate() argument list script: dtc: clean generated files ...
2012-12-08Merge branch 'tip/perf/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core Pull ftrace updates from Steve Rostedt. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-03openrisc: use new common dtc ruleStephen Warren
The current rules have the .dtb files build in a different directory from the .dts files. This patch changes openrisc to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. This requires renaming arch/openrisc/boot/Makefile to arch/openrisc/boot/dts/Makefile, and updating arch/openrisc/Makefile to call the new Makefile. Cc: Jonas Bonn <jonas@southpole.se> Cc: linux@lists.openrisc.net Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-12-03treewide: Fix typos in various KconfigMasanari Iida
Correct spelling typo within various Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-28flagday: don't pass regs to copy_thread()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28openrisc: switch to use of generic fork and cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28kill stray kernel_thread() garbageAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28Merge branches 'no-rebases', 'arch-avr32', 'arch-blackfin', 'arch-cris', ↵Al Viro
'arch-h8300', 'arch-m32r', 'arch-mn10300', 'arch-score', 'arch-sh' and 'arch-powerpc' into for-next
2012-11-28openrisk: fix altstack switching on sigreturnAl Viro
do_sigaltstack() expects _userland_ address, TYVM... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-13tracing,x86: Add a TSC trace_clockDavid Sharp
In order to promote interoperability between userspace tracers and ftrace, add a trace_clock that reports raw TSC values which will then be recorded in the ring buffer. Userspace tracers that also record TSCs are then on exactly the same time base as the kernel and events can be unambiguously interlaced. Tested: Enabled a tracepoint and the "tsc" trace_clock and saw very large timestamp values. v2: Move arch-specific bits out of generic code. v3: Rename "x86-tsc", cleanups v7: Generic arch bits in Kbuild. Google-Bug-Id: 6980623 Link: http://lkml.kernel.org/r/1352837903-32191-1-git-send-email-dhsharp@google.com Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Signed-off-by: David Sharp <dhsharp@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>