summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs
AgeCommit message (Collapse)Author
2011-08-30powerpc/85xx: enable caam crypto driver by defaultKim Phillips
corenet based SoCs have SEC4 h/w, so enable the SEC4 driver, caam, and the algorithms it supports, and disable the SEC2/3 driver, talitos. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30powerpc/85xx: enable the audio drivers in the defconfigsTimur Tabi
Enable the audio drivers in the non-corenet 85xx defconfigs so that audio is enabled on the Freescale P1022DS reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-22Merge remote-tracking branch 'jwb/next' into nextBenjamin Herrenschmidt
2011-07-19powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigsAnton Blanchard
As a result of changes to Kconfig files, we no longer enable the lockup and hung task detectors. Both are very light weight and provide useful information in the event of a hang, so reenable them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Add mpt2sas driver to pseries and ppc64 defconfigAnton Blanchard
Add mpt2sas driver to pseries and ppc64 defconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Disable IRQs off tracer in ppc64 defconfigAnton Blanchard
The IRQs off tracer enables mcount which has a big impact on performance. Disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19powerpc: Sync pseries and ppc64 defconfigsAnton Blanchard
The pseries defconfig had a number of drivers enabled and we may as well add them to the ppc64 defconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-12powerpc/47x: allow kernel to be loaded in higher physical memoryDave Kleikamp
The 44x code (which is shared by 47x) assumes the available physical memory begins at 0x00000000. This is not necessarily the case in an AMP environment. Support CONFIG_RELOCATABLE for 476 in order to allow the kernel to be loaded into a higher memory range. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2011-07-08powerpc/85xx: Add p2040 RDB board supportMingkai Hu
P2040RDB Specification: ----------------------- 2Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus) 128 Mbyte NOR flash single-chip memory 256 Kbit M24256 I2C EEPROM 16 Mbyte SPI memory SD connector to interface with the SD memory card dTSEC1: connected to the Vitesse SGMII PHY (VSC8221) dTSEC2: connected to the Vitesse SGMII PHY (VSC8221) dTSEC3: connected to the Vitesse SGMII PHY (VSC8221) dTSEC4: connected to the Vitesse RGMII PHY (VSC8641) dTSEC5: connected to the Vitesse RGMII PHY (VSC8641) I2C1: Real time clock, Temperature sensor I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors UART: supports two UARTs up to 115200 bps for console USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces PCIe: - Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1 - Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-08powerpc/85xx: add hypervisor config entries to corenet_smp_defconfigTimur Tabi
CONFIG_PPC_EPAPR_HV_BYTECHAN adds support for the Freescale hypervisor byte channel tty driver. CONFIG_VIRT_DRIVERS and CONFIG_FSL_HV_MANAGER add support for the Freescale hypervisor management driver. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-30Merge remote branch 'origin/master' into nextBenjamin Herrenschmidt
2011-06-29powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfigMichael Neuling
Remove duplicate assignment of SCSI_BNX2_ISCSI in pseries_defconfig introduced by: 37e0c21e powerpc/pseries: Enable iSCSI support for a number of cards causes warning: arch/powerpc/configs/pseries_defconfig:151:warning: override: reassigning to symbol SCSI_BNX2_ISCSI Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-27powerpc/85xx: Add P1010RDB board supportPrabhakar Kushwaha
P1010RDB Overview ----------------- 1Gbyte DDR3 (on board DDR) 32Mbyte 16bit NOR flash 32Mbyte SLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory I2C Board 128x8 bit memory SD/MMC connector to interface with the SD memory card 2 SATA interface 1 internal SATA connect to 2.5. 160G SATA2 HDD 1 eSATA connector to rear panel USB 2.0 x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface. x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet eTSEC1: Connected to RGMII PHY VSC8641XKO eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY VSC8221 eCAN Two DB-9 female connectors for Field bus interface UART DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/86xx: enable the framebuffer console on the MPC8610 HPCDTimur Tabi
Enable framebuffer console support by default in the defconfig on the Freescale MPC8610 HPCD reference board. This allows the boot messages to be shown on the video display. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/85xx: enable the framebuffer console for the defconfigsTimur Tabi
Enable framebuffer console support by default in the defconfigs for the Freescale 85xx-based reference board. This allows the boot messages to be shown on the video display on the P1022DS. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc/85xx: Add basic P1023RDS board supportRoy Zang
The P1023 processor is an e500v2 based SoC that utilizes the DPAA networking architecture. This adds basic board support for non-DPAA functionality (device tree, board file, etc). Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc: Add a defconfig for 'corenet' 32-bit platformsKumar Gala
The e500mc and e5500 based cores are only available on corenet based SoCs. We use this name for the P204x, P3040, P4040, P4080, P50x0 SoCs and any future processors in these families. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc: Rename e55xx_smp_defconfig to corenet64_smp_defconfigKumar Gala
Rather than trying to use the core name we use corenet to distinquish the platform/core combo. corenet64 will be a 64-bit kernel build and we'll add a new defconfig for corenet32 for a 32-bit platforms. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-15rtc: fix build warnings in defconfigsWanlong Gao
RTC_CLASS is changed to bool, so 'm' is invalid. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26cgroup: remove the ns_cgroupDaniel Lezcano
The ns_cgroup is an annoying cgroup at the namespace / cgroup frontier and leads to some problems: * cgroup creation is out-of-control * cgroup name can conflict when pids are looping * it is not possible to have a single process handling a lot of namespaces without falling in a exponential creation time * we may want to create a namespace without creating a cgroup The ns_cgroup was replaced by a compatibility flag 'clone_children', where a newly created cgroup will copy the parent cgroup values. The userspace has to manually create a cgroup and add a task to the 'tasks' file. This patch removes the ns_cgroup as suggested in the following thread: https://lists.linux-foundation.org/pipermail/containers/2009-June/018616.html The 'cgroup_clone' function is removed because it is no longer used. This is a userspace-visible change. Commit 45531757b45c ("cgroup: notify ns_cgroup deprecated") (merged into 2.6.27) caused the kernel to emit a printk warning users that the feature is planned for removal. Since that time we have heard from XXX users who were affected by this. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jamal Hadi Salim <hadi@cyberus.ca> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Acked-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-20Merge remote branch 'kumar/next' into nextBenjamin Herrenschmidt
2011-05-19powerpc/fsl: enable verbose bug outputScott Wood
This debug option has no overhead other than a slight increase in kernel size, and makes bug reports more useful. While some end users may prefer to save the space, as a default on a kernel config aimed primarily at development on reference boards, it should be enabled. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19powerpc/e5500: add networking to defconfigScott Wood
Even though support for the p5020's on-chip ethernet is not yet upstream, it is not appropriate to disable all networking support (including loopback, unix domain sockets, external ethernet devices, etc) in the defconfig. The networking settings are taken from mpc85xx_smp_defconfig, minus the drivers for ethernet devices not found on any current e5500 chip. The other changes are the result of running "make savedefconfig". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19powerpc/pseries: Enable iSCSI support for a number of cardsAnton Blanchard
Enable iSCSI support for a number of cards. We had the base networking devices enabled but forgot to enable iSCSI. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19powerpc/pseries: Enable Emulex and Qlogic 10Gbit cardsAnton Blanchard
Enable the Qlogic and Emulex 10Gbit adapters. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-27powerpc: Fix build warning of the defconfigsWanlong Gao
BT_L2CAP and BT_SCO have changed to bool . Value 'm' has invalid . Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-30powerpc/pseries: Enable Chelsio network and iWARP driversAnton Blanchard
Ensure the Chelsio T3/T4 network drivers and iWARP drivers are enabled in the pseries config. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-30powerpc: Restore some misc devices to our configsStephen Rothwell
Uwe Kleine-König reported: while working on an defconfig (arm/mx27) I noticed that just updating it[1] results in removing CONFIG_EEPROM_AT24=y. The reason is that since commit v2.6.36-5965-g5f2365d (misc devices: do not enable by default) MISC_DEVICES isn't enabled anymore by default. So all defconfigs that have CONFIG_SOME_SYMBOL=y (or =m) (with SOME_SYMBOL depending on MISC_DEVICES) but not CONFIG_MISC_DEVICES=y suffer from the same problem. This restores those misc devices to the powerpc defconfigs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Uwe Kleine-König Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-15powerpc/8xx: remove obsolete mgsuvd boardHolger Brunck
The MPC852 based mgsuvd board from Keymile was initially ported, but later on not developed further. This patch removes the respective files to decrease merging conflicts and unneeded maintenance. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher<hs@denx.de> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Marcelo Tosatti <marcelo@kvack.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-15powerpc/82xx: rename and update mgcoge board supportHolger Brunck
The mgcoge board from keymile is now base for some other similar boards. Therefore the board specific name mgcoge was renamed to a generic name km82xx. Additionally some enhancements were made: - rework partition table in dts file - add cpm2_pio_c gpio controller in dts file - update defconfig - add pin description for SCC1 - add pin description and configuration for USB Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-15powerpc/83xx: rename and update kmeter1Holger Brunck
Beside the MPC 8360 based board kmeter1 other km83xx boards from keymile will follow. Therefore the board specific naming kmeter1 for functions and files were replaced with km83xx. Additionally some updates were made: - update defconfig for 2.6.38 - rework flash partitioning in dts file - add gpio controller for qe_pio_c in dts Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-21Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/mpic: Fix mask/unmask timeout message powerpc/pseries: Add BNX2=m to defconfig powerpc: Enable 64kB pages and 1024 threads in pseries config powerpc: Disable mcount tracers in pseries defconfig powerpc/boot/dts: Install dts from the right directory powerpc: machine_check_generic is wrong on 64bit powerpc: Check RTAS extended log flag before checking length powerpc: Fix corruption when grabbing FWNMI data powerpc: Rework pseries machine check handler powerpc: Don't silently handle machine checks from userspace powerpc: Remove duplicate debugger hook in machine_check_exception powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check powerpc: Don't force MSR_RI in machine_check_exception powerpc: Print 32 bits of DSISR in show_regs powerpc/kdump: Disable ftrace during kexec powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare powerpc/kexec: Don't initialise kexec hooks to default handlers powerpc/kdump: Remove ppc_md.machine_crash_shutdown powerpc/kexec: Remove ppc_md.machine_kexec ...
2011-01-21powerpc/pseries: Add BNX2=m to defconfigNishanth Aravamudan
Upcoming servers will include a Broadcom NIC, add to the defconfig to increase testing coverage and make sure mainline builds come up with networking. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc: Enable 64kB pages and 1024 threads in pseries configAnton Blanchard
- Enable 64kB pages so it gets some regular testing. - The largest POWER7 has 1024 threads so bump NR_CPUS it to match. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21powerpc: Disable mcount tracers in pseries defconfigAnton Blanchard
IRQSOFF_TRACER and STACK_TRACER force the kernel to be built with -pg which is a substantial overhead. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-29powerpc/4xx: Add Canyonlands suspend and idle supportVictor Gallardo
- Add Clock Power Management (CPM) node to dts tree - Add idle-doze entry in CPM node - Add standby entry in CPM node - Add PM and SUSPEND support by default in defconfig - Remove UART2 and UART3 as they are unused, this will allow CPM to put unused-units (UART2 and UART3) to sleep. Signed-off-by: Victor Gallardo <vgallardo@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-11-29powerpc/4xx: Add Kilauea suspend and idle supportVictor Gallardo
- Add Clock Power Management (CPM) node to dts tree - Add idle-doze entry in CPM node - Add standby entry in CPM node - Add PM and SUSPEND support by default in defconfig - Add NO_HZ and CONFIG_HIGH_RES_TIMERS support by default in defconfig Signed-off-by: Victor Gallardo <vgallardo@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-15Merge remote branch 'jwb/next' into nextBenjamin Herrenschmidt
2010-10-14powerpc/85xx: add DIU support to the Freecale P1022DS reference boardTimur Tabi
The Freescale P1022DS has an on-chip video controller called the DIU, and a driver for this device already exists. Update the platform file for the P1022DS reference board to enable the driver, and update the defconfig for Freescale MPC85xx boards to add the driver. [Edited to resolve header add/add conflict and drop #define DEBUG. -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-14powerpc/44x: Update ppc44x_defconfigJosh Boyer
Make sure the new bluestone board is selected for the multiplatform defconfig. Also build logfs and squashfs as modules. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-10-14powerpc/fsl-booke: Add e55xx (64-bit) smp defconfigKumar Gala
The p5020 SoC from Freescale is the first 64-bit Book-E processor and utilizes the two e5500 cores. Adding a defconfig that enables basic kernel for e5500 based processors. Also added the p5020 / e5500 support to the ppc64e defconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-13powerpc/44x: Add support for the AMCC APM821xx SoCTirumala Marri
This patch adds CPU, device tree, defconfig and bluestone board support for APM821xx SoC. Signed-off-by: Tirumala R Marri <tmarri@apm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-04powerpc/8xx: Add support for the MPC8xx based boards from TQCHeiko Schocher
Supported SMC1 (serial console), SCC1 Ethernet (10Mbps HD). FEC Ethernet, 8MB NOR CFI Flash. Tested on STK8xx with TQM860L (with FEC) and with TQM855M (without FEC). Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-04powerpc/85xx: Introduce support for the Freescale P1022DS reference boardTimur Tabi
Introduce basic support for the Freescale P1022DS reference board, based on the Freescale BSP for this board. This patch excludes the DIU, SSI, and MMC/SD drivers. Only a 36-bit DTS is provided. Update mpc86xx_smp_defconfig and mpc85xx_defconfig to support the P1022DS. This means enabling 64-bit physical address support, increasing the maximum zone order to 12 (to allow the DIU driver to allocate large chunks), and clean up the audio options to disable the deprecated OSS support. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-06-15powerpc: Disable CONFIG_SYSFS_DEPRECATEDGrant Likely
Acked-by: Grant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-31Merge commit 'jwb/next' into nextBenjamin Herrenschmidt
2010-05-26powerpc/44x: icon: select SM502 and frame buffer console supportAnatolij Gustschin
Enables SM502 frame buffer and framebuffer console in the default config file Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-24 07:58:02 +0000