summaryrefslogtreecommitdiff
path: root/arch/powerpc/include/asm/mpc52xx.h
AgeCommit message (Collapse)Author
2012-09-14powerpc/mpc52xx_lpbfifo: optionally defer fifo transfer startAnatolij Gustschin
Currently fifo transfer is started when submitting a transfer request. Add posibility to defer the fifo transfer and start it later by calling additional function. This change is backward compatible, the behaviour of mpc52xx_lpbfifo_submit() is the same for previous driver users, so there is no need to adapt them. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-08-06powerpc/5200: add mpc5200_psc_ac97_gpio_resetEric Millbrandt
Work around a silicon bug in the ac97 reset functionality of the mpc5200(b). The implementation of the ac97 "cold" reset is flawed. If the sync and output lines are high when reset is asserted the attached ac97 device may go into test mode. Avoid this by reconfiguring the psc to gpio mode and generating the reset manually. From MPC5200B User's Manual: "Some AC97 devices goes to a test mode, if the Sync line is high during the Res line is low (reset phase). To avoid this behavior the Sync line must be also forced to zero during the reset phase. To do that, the pin muxing should switch to GPIO mode and the GPIO control register should be used to control the output lines." Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-13mpc52xx/wdt: merge WDT code into the GPT driverAlbrecht Dreß
Merge the WDT code into the GPT interface. Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-12mpc5200/gpt: tiny fix for gpt period limitationAlbrecht Dreß
This patch changes the period parameter of mpc52xx_gpt_start_timer to a u64 to support larger timeout periods. Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-04powerpc/5200: add LocalPlus bus FIFO device driverJohn Bonesio
This is a driver for the FIFO device on the LocalPlus bus on an mpc5200 system. The driver supports programmed I/O through the FIFO as well as setting up DMA via the BestComm engine through the FIFO. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-04powerpc/5200: add general purpose timer API for the MPC5200Grant Likely
This patch adds an interface for controlling the timer function of the MPC5200 GPT devices. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-17powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() functionWolfgang Denk
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency, while MPC52xx used mpc52xx_find_ipb_freq(). Despite the different clock names (IPS vs. IPB) the code was identical. Use common code for both processor families. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-11powerpc/5200: add function to return external clock frequencyWolfgang Grandegger
This patch adds the utility function mpc52xx_get_xtal_freq() to get the frequency of the external oscillator clock connected to the pin SYS_XTAL_IN. The MSCAN may us it as clock source. Unfortunately, this value is not available from the FDT blob, but it can be determined from the IPB frequency. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21powerpc/mpc5200: Document and tidy irq driverGrant Likely
This patch adds documentation to the mpc5200 interrupt controller driver and cleans up some minor coding conventions. It also moves the contents of mpc52xx_pic.h into the driver proper (except for a small common bit that is moved to the common mpc52xx.h) because the information encoded there is not required by any other part of kernel code. Finally for code readability sake, the L2_OFFSET shift value is removed because the code using it resolves to a noop. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-08-04powerpc: Move include files to arch/powerpc/include/asmStephen Rothwell
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>