summaryrefslogtreecommitdiff
path: root/arch/s390/kvm/interrupt.c
AgeCommit message (Collapse)Author
2019-05-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "ARM: - support for SVE and Pointer Authentication in guests - PMU improvements POWER: - support for direct access to the POWER9 XIVE interrupt controller - memory and performance optimizations x86: - support for accessing memory not backed by struct page - fixes and refactoring Generic: - dirty page tracking improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits) kvm: fix compilation on aarch64 Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU" kvm: x86: Fix L1TF mitigation for shadow MMU KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing" KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete tests: kvm: Add tests for KVM_SET_NESTED_STATE KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID tests: kvm: Add tests to .gitignore KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one KVM: Fix the bitmap range to copy during clear dirty KVM: arm64: Fix ptrauth ID register masking logic KVM: x86: use direct accessors for RIP and RSP KVM: VMX: Use accessors for GPRs outside of dedicated caching logic KVM: x86: Omit caching logic for always-available GPRs kvm, x86: Properly check whether a pfn is an MMIO or not ...
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-29s390/airq: recognize directed interruptsSebastian Ott
Add an extra parameter for airq handlers to recognize floating vs. directed interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-18KVM: s390: Fix potential spectre warningsEric Farman
Fix some warnings from smatch: arch/s390/kvm/interrupt.c:2310 get_io_adapter() warn: potential spectre issue 'kvm->arch.adapters' [r] (local cap) arch/s390/kvm/interrupt.c:2341 register_io_adapter() warn: potential spectre issue 'dev->kvm->arch.adapters' [w] Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190417005414.47801-1-farman@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: fix possible null pointer dereference in pending_irqs()Michael Mueller
Assure a GISA is in use before accessing the IPM to avoid a null pointer dereference issue. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reported-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190131085247.13826-16-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: add gib_alert_irq_handler()Michael Mueller
The patch implements a handler for GIB alert interruptions on the host. Its task is to alert guests that interrupts are pending for them. A GIB alert interrupt statistic counter is added as well: $ cat /proc/interrupts CPU0 CPU1 ... GAL: 23 37 [I/O] GIB Alert ... Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20190131085247.13826-14-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: kvm_s390_gisa_clear() now clears the IPM onlyMichael Mueller
Function kvm_s390_gisa_clear() now clears the Interruption Pending Mask of the GISA asap. If the GISA is in the alert list at this time it stays in the list but is removed by process_gib_alert_list(). Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20190131085247.13826-13-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: add functions to (un)register GISC with GISAMichael Mueller
Add the Interruption Alert Mask (IAM) to the architecture specific kvm struct. This mask in the GISA is used to define for which ISC a GIB alert will be issued. The functions kvm_s390_gisc_register() and kvm_s390_gisc_unregister() are used to (un)register a GISC (guest ISC) with a virtual machine and its GISA. Upon successful completion, kvm_s390_gisc_register() returns the ISC to be used for GIB alert interruptions. A negative return code indicates an error during registration. Theses functions will be used by other adapter types like AP and PCI to request pass-through interruption support. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190131085247.13826-12-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: add the GIB and its related life-cyle functionsMichael Mueller
The Guest Information Block (GIB) links the GISA of all guests that have adapter interrupts pending. These interrupts cannot be delivered because all vcpus of these guests are currently in WAIT state or have masked the respective Interruption Sub Class (ISC). If enabled, a GIB alert is issued on the host to schedule these guests to run suitable vcpus to consume the pending interruptions. This mechanism allows to process adapter interrupts for currently not running guests. The GIB is created during host initialization and associated with the Adapter Interruption Facility in case an Adapter Interruption Virtualization Facility is available. The GIB initialization and thus the activation of the related code will be done in an upcoming patch of this series. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20190131085247.13826-10-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: introduce struct kvm_s390_gisa_interruptMichael Mueller
Use this struct analog to the kvm interruption structs for kvm emulated floating and local interruptions. GIB handling will add further fields to this structure as required. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20190131085247.13826-8-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: remove kvm_s390_ from gisa static inline functionsMichael Mueller
This will shorten the length of code lines. All GISA related static inline functions are local to interrupt.c. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20190131085247.13826-7-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: use pending_irqs_no_gisa() where appropriateMichael Mueller
Interruption types that are not represented in GISA shall use pending_irqs_no_gisa() to test pending interruptions. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20190131085247.13826-6-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: coding style kvm_s390_gisa_init/clear()Michael Mueller
The change helps to reduce line length and increases code readability. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20190131085247.13826-5-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: move bitmap idle_mask into arch struct top levelMichael Mueller
The vcpu idle_mask state is used by but not specific to the emulated floating interruptions. The state is relevant to gisa related interruptions as well. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20190131085247.13826-4-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: make bitmap declaration consistentMichael Mueller
Use a consistent bitmap declaration throughout the code. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20190131085247.13826-3-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-05KVM: s390: drop obsolete else pathMichael Mueller
The explicit else path specified in set_intercept_indicators_io is not required as the function returns in case the first branch is taken anyway. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20190131085247.13826-2-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-06-20sched/swait: Rename to exclusivePeter Zijlstra
Since swait basically implemented exclusive waits only, make sure the API reflects that. $ git grep -l -e "\<swake_up\>" -e "\<swait_event[^ (]*" -e "\<prepare_to_swait\>" | while read file; do sed -i -e 's/\<swake_up\>/&_one/g' -e 's/\<swait_event[^ (]*/&_exclusive/g' -e 's/\<prepare_to_swait\>/&_exclusive/g' $file; done With a few manual touch-ups. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: bigeasy@linutronix.de Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180612083909.261946548@infradead.org
2018-05-17KVM: s390: introduce defines for control registersDavid Hildenbrand
In KVM code we use masks to test/set control registers. Let's define the ones we use in arch/s390/include/asm/ctl_reg.h and replace all occurrences in KVM code. As we will be needing the define for Clock-comparator sign control soon, let's also add it. Suggested-by: Collin L. Walling <walling@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-14KVM: s390: provide counters for all interrupt injects/deliveryChristian Borntraeger
For testing the exitless interrupt support it turned out useful to have separate counters for inject and delivery of I/O interrupt. While at it do the same for all interrupt types. For timer related interrupts (clock comparator and cpu timer) we even had no delivery counters. Fix this as well. On this way some counters are being renamed to have a similar name. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2018-03-14KVM: add machine check counter to kvm_statQingFeng Hao
This counter can be used for administration, debug or test purposes. Suggested-by: Vladislav Mironov <mironov@de.ibm.com> Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-20KVM: s390: take care of clock-comparator sign controlDavid Hildenbrand
Missed when enabling the Multiple-epoch facility. If the facility is installed and the control is set, a sign based comaprison has to be performed. Right now we would inject wrong interrupts and ignore interrupt conditions. Also the sleep time is calculated in a wrong way. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180207114647.6220-2-david@redhat.com> Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support") Cc: stable@vger.kernel.org Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-14KVM: s390: use switch vs jump table in interrupt.cDavid Hildenbrand
Just like for the interception handlers, let's also use a switch-case in our interrupt delivery code. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180206141743.24497-1-david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-14KVM: s390: do not set intervention requests for GISA interruptsChristian Borntraeger
If GISA is available, we do not have to kick CPUs out of SIE to deliver interrupts. The hardware can deliver such interrupts while running. Cc: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-02-14KVM: s390: optimize wakeup for exitless interruptsChristian Borntraeger
For interrupt injection of floating interrupts we queue the interrupt either in the GISA or in the floating interrupt list. The first CPU that looks at these data structures - either in KVM code or hardware will then deliver that interrupt. To minimize latency we also: -a: choose a VCPU to deliver that interrupt. We prefer idle CPUs -b: we wake up the host thread that runs the VCPU -c: set an I/O intervention bit for that CPU so that it exits guest context as soon as the PSW I/O mask is enabled This will make sure that this CPU will execute the interrupt delivery code of KVM very soon. We can now optimize the injection case if we have exitless interrupts. The wakeup is still necessary in case the target CPU sleeps. We can avoid the I/O intervention request bit though. Whenever this intervention request would be handled, the hardware could also directly inject the interrupt on that CPU, no need to go through the interrupt injection loop of KVM. Cc: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26KVM: s390: introduce the format-1 GISAMichael Mueller
The patch modifies the previously defined GISA data structure to be able to store two GISA formats, format-0 and format-1. Additionally, it verifies the availability of the GISA format facility and enables the use of a format-1 GISA in the SIE control block accordingly. A format-1 can do everything that format-0 can and we will need it for real HW passthrough. As there are systems with only format-0 we keep both variants. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26KVM: s390: activate GISA for emulated interruptsMichael Mueller
If the AIV facility is available, a GISA will be used to manage emulated adapter interrupts. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26KVM: s390: make kvm_s390_get_io_int() aware of GISAMichael Mueller
The function returns a pending I/O interrupt with the highest priority defined by its ISC. Together with AIV activation, pending adapter interrupts are managed by the GISA IPM. Thus kvm_s390_get_io_int() needs to inspect the IPM as well when the interrupt with the highest priority has to be identified. In case classic and adapter interrupts with the same ISC are pending, the classic interrupt will be returned first. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26KVM: s390: add GISA interrupts to FLIC ioctl interfaceMichael Mueller
Pending interrupts marked in the GISA IPM are required to become part of the answer of ioctl KVM_DEV_FLIC_GET_ALL_IRQS. The ioctl KVM_DEV_FLIC_ENQUEUE is already capable to enqueue adapter interrupts when a GISA is present. With ioctl KVM_DEV_FLIC_CLEAR_IRQS the GISA IPM wil be cleared now as well. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26KVM: s390: abstract adapter interruption word generation from ISCMichael Mueller
The function isc_to_int_word() allows the generation of interruption words for adapter interrupts. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26KVM: s390: exploit GISA and AIV for emulated interruptsMichael Mueller
The adapter interruption virtualization (AIV) facility is an optional facility that comes with functionality expected to increase the performance of adapter interrupt handling for both emulated and passed-through adapter interrupts. With AIV, adapter interrupts can be delivered to the guest without exiting SIE. This patch provides some preparations for using AIV for emulated adapter interrupts (including virtio) if it's available. When using AIV, the interrupts are delivered at the so called GISA by setting the bit corresponding to its Interruption Subclass (ISC) in the Interruption Pending Mask (IPM) instead of inserting a node into the floating interrupt list. To keep the change reasonably small, the handling of this new state is deferred in get_all_floating_irqs and handle_tpi. This patch concentrates on the code handling enqueuement of emulated adapter interrupts, and their delivery to the guest. Note that care is still required for adapter interrupts using AIV, because there is no guarantee that AIV is going to deliver the adapter interrupts pending at the GISA (consider all vcpus idle). When delivering GISA adapter interrupts by the host (usual mechanism) special attention is required to honor interrupt priorities. Empirical results show that the time window between making an interrupt pending at the GISA and doing kvm_s390_deliver_pending_interrupts is sufficient for a guest with at least moderate cpu activity to get adapter interrupts delivered within the SIE, and potentially save some SIE exits (if not other deliverable interrupts). The code will be activated with a follow-up patch. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26KVM: s390: implement GISA IPM related primitivesMichael Mueller
The patch implements routines to access the GISA to test and modify its Interruption Pending Mask (IPM) from the host side. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-26KVM: s390: reverse bit ordering of irqs in pending maskMichael Mueller
This patch prepares a simplification of bit operations between the irq pending mask for emulated interrupts and the Interruption Pending Mask (IPM) which is part of the Guest Interruption State Area (GISA), a feature that allows interrupt delivery to guests by means of the SIE instruction. Without that change, a bit-wise *or* operation on parts of these two masks would either require a look-up table of size 256 bytes to map the IPM to the emulated irq pending mask bit orientation (all bits mirrored at half byte) or a sequence of up to 8 condidional branches to perform tests of single bit positions. Both options are to be rejected either by performance or space utilization reasons. Beyond that this change will be transparent. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24KVM: s390: introduce and use kvm_s390_test_cpuflags()David Hildenbrand
Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags(). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180123170531.13687-5-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24KVM: s390: introduce and use kvm_s390_clear_cpuflags()David Hildenbrand
Use it just like kvm_s390_set_cpuflags(). Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180123170531.13687-4-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24KVM: s390: reuse kvm_s390_set_cpuflags()David Hildenbrand
Use it in all places where we set cpuflags. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180123170531.13687-3-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24KVM: s390: rename __set_cpuflag() to kvm_s390_set_cpuflags()David Hildenbrand
No need to make this function special. Move it to a header right away. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180123170531.13687-2-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-16KVM: s390: cleanup struct kvm_s390_float_interruptDavid Hildenbrand
"wq" is not used at all. "cpuflags" can be access directly via the vcpu, just as "float_int" via vcpu->kvm. While at it, reuse _set_cpuflag() to make the code look nicer. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180108193747.10818-1-david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-16KVM: s390: drop use of spin lock in __floating_irq_kickMichael Mueller
It is not required to take to a lock to protect access to the cpuflags of the local interrupt structure of a vcpu as the performed operation is an atomic_or. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-12-06KVM: s390: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all arch/s390/kvm/ files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Message-Id: <20171124140043.10062-9-gregkh@linuxfoundation.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-12-06KVM: s390: add SPDX identifiers to the remaining filesGreg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the arch/s390/kvm/ files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Message-Id: <20171124140043.10062-3-gregkh@linuxfoundation.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-11-16Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.15 Common: - Python 3 support in kvm_stat - Accounting of slabs to kmemcg ARM: - Optimized arch timer handling for KVM/ARM - Improvements to the VGIC ITS code and introduction of an ITS reset ioctl - Unification of the 32-bit fault injection logic - More exact external abort matching logic PPC: - Support for running hashed page table (HPT) MMU mode on a host that is using the radix MMU mode; single threaded mode on POWER 9 is added as a pre-requisite - Resolution of merge conflicts with the last second 4.14 HPT fixes - Fixes and cleanups s390: - Some initial preparation patches for exitless interrupts and crypto - New capability for AIS migration - Fixes x86: - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and after-reset state - Refined dependencies for VMX features - Fixes for nested SMI injection - A lot of cleanups" * tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits) KVM: s390: provide a capability for AIS state migration KVM: s390: clear_io_irq() requests are not expected for adapter interrupts KVM: s390: abstract conversion between isc and enum irq_types KVM: s390: vsie: use common code functions for pinning KVM: s390: SIE considerations for AP Queue virtualization KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup KVM: PPC: Book3S HV: Cosmetic post-merge cleanups KVM: arm/arm64: fix the incompatible matching for external abort KVM: arm/arm64: Unify 32bit fault injection KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared KVM: arm/arm64: vgic-its: New helper functions to free the caches KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device arm/arm64: KVM: Load the timer state when enabling the timer KVM: arm/arm64: Rework kvm_timer_should_fire KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit KVM: arm/arm64: Move phys_timer_emulate function KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps ...
2017-11-09KVM: s390: clear_io_irq() requests are not expected for adapter interruptsMichael Mueller
There is a chance to delete not yet delivered I/O interrupts if an exploiter uses the subsystem identification word 0x0000 while processing a KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl. -EINVAL will be returned now instead in that case. Classic interrupts will always have bit 0x10000 set in the schid while adapter interrupts have a zero schid. The clear_io_irq interface is only useful for classic interrupts (as adapter interrupts belong to many devices). Let's make this interface more strict and forbid a schid of 0. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-11-09KVM: s390: abstract conversion between isc and enum irq_typesMichael Mueller
The abstraction of the conversion between an isc value and an irq_type by means of functions isc_to_irq_type() and irq_type_to_isc() allows to clarify the respective operations where used. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-11-09KVM: s390: document memory ordering for kvm_s390_vcpu_wakeupChristian Borntraeger
swait_active does not enforce any ordering and it can therefore trigger some subtle races when the CPU moves the read for the check before a previous store and that store is then used on another CPU that is preparing the swait. On s390 there is a call to swait_active in kvm_s390_vcpu_wakeup. The good thing is, on s390 all potential races cannot happen because all callers of kvm_s390_vcpu_wakeup do not store (no race) or use an atomic operation, which handles memory ordering. Since this is not guaranteed by the Linux semantics (but by the implementation on s390) let's add smp_mb_after_atomic to make this obvious and document the ordering. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-10-19s390/ctl_reg: move control register definitions to ctl_reg.hMartin Schwidefsky
The nmi.h header has some constant defines for control register bits. These definitions should really be located in ctl_reg.h. Move and rename the defines. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-08-31KVM: s390: use WARN_ON_ONCE only for checkingDavid Hildenbrand
Move the real logic that always has to be executed out of the WARN_ON_ONCE. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170830160603.5452-3-david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "PPC: - Better machine check handling for HV KVM - Ability to support guests with threads=2, 4 or 8 on POWER9 - Fix for a race that could cause delayed recognition of signals - Fix for a bug where POWER9 guests could sleep with interrupts pending. ARM: - VCPU request overhaul - allow timer and PMU to have their interrupt number selected from userspace - workaround for Cavium erratum 30115 - handling of memory poisonning - the usual crop of fixes and cleanups s390: - initial machine check forwarding - migration support for the CMMA page hinting information - cleanups and fixes x86: - nested VMX bugfixes and improvements - more reliable NMI window detection on AMD - APIC timer optimizations Generic: - VCPU request overhaul + documentation of common code patterns - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits) Update my email address kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12 kvm: x86: mmu: allow A/D bits to be disabled in an mmu x86: kvm: mmu: make spte mmio mask more explicit x86: kvm: mmu: dead code thanks to access tracking KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code KVM: PPC: Book3S HV: Close race with testing for signals on guest entry KVM: PPC: Book3S HV: Simplify dynamic micro-threading code KVM: x86: remove ignored type attribute KVM: LAPIC: Fix lapic timer injection delay KVM: lapic: reorganize restart_apic_timer KVM: lapic: reorganize start_hv_timer kvm: nVMX: Check memory operand to INVVPID KVM: s390: Inject machine check into the nested guest KVM: s390: Inject machine check into the guest tools/kvm_stat: add new interactive command 'b' tools/kvm_stat: add new command line switch '-i' tools/kvm_stat: fix error on interactive command 'g' KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit ...
2017-06-28KVM: s390: Inject machine check into the guestQingFeng Hao
If the exit flag of SIE indicates that a machine check has happened during guest's running and needs to be injected, inject it to the guest accordingly. But some machine checks, e.g. Channel Report Pending (CRW), refer to host conditions only (the guest's channel devices are not managed by the kernel directly) and are therefore not injected into the guest. External Damage (ED) is also not reinjected into the guest because ETR conditions are gone in Linux and STP conditions are not enabled in the guest, and ED contains only these 8 ETR and STP conditions. In general, instruction-processing damage, system recovery, storage error, service-processor damage and channel subsystem damage will be reinjected into the guest, and the remain (System damage, timing-facility damage, warning, ED and CRW) will be handled on the host. Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-06-22KVM: S390: add new group for flicYi Min Zhao
In some cases, userspace needs to get or set all ais states for example migration. So we introduce a new group KVM_DEV_FLIC_AISM_ALL to provide interfaces to get or set the adapter-interruption-suppression mode for all ISCs. The corresponding documentation is updated. Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-05-31KVM: s390: fix ais handling vs cpu modelChristian Borntraeger
If ais is disabled via cpumodel, we must act accordingly, even if KVM_CAP_S390_AIS was enabled. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-25 18:15:36 +0000