summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/acpi/boot.c
AgeCommit message (Collapse)Author
2011-03-02x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systemsAndreas Herrmann
commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 upstream. On some SB800 systems polarity for IOAPIC pin2 is wrongly specified as low active by BIOS. This caused system hangs after resume from S3 when HPET was used in one-shot mode on such systems because a timer interrupt was missed (HPET signal is high active). For more details see: http://marc.info/?l=linux-kernel&m=129623757413868 Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Tested-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20110224145346.GD3658@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-01x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUsSuresh Siddha
commit 681ee44d40d7c93b42118320e4620d07d8704fd6 upstream We need to fall back from logical-flat APIC mode to physical-flat mode when we have more than 8 CPUs. However, in the presence of CPU hotplug(with bios listing not enabled but possible cpus as disabled cpus in MADT), we have to consider the number of possible CPUs rather than the number of current CPUs; otherwise we may cross the 8-CPU boundary when CPUs are added later. 32bit apic code can use more cleanups (like the removal of vendor checks in 32bit default_setup_apic_routing()) and more unifications with 64bit code. Yinghai has some patches in works already. This patch addresses the boot issue that is reported in the virtualization guest context. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Shaohui Zheng <shaohui.zheng@intel.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15x86: Fix SCI on IOAPIC != 0Yinghai Lu
commit 18dce6ba5c8c6bd0f3ab4efa4cbdd698dab5c40a upstream. Thomas Renninger <trenn@suse.de> reported on IBM x3330 booting a latest kernel on this machine results in: PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: SCI (IRQ30) allocation failed ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20090903/evevent-161) ACPI: Unable to start the ACPI Interpreter Later all kind of devices fail... and bisect it down to this commit: commit b9c61b70075c87a8612624736faf4a2de5b1ed30 x86/pci: update pirq_enable_irq() to setup io apic routing it turns out we need to set irq routing for the sci on ioapic1 early. -v2: make it work without sparseirq too. -v3: fix checkpatch.pl warning, and cc to stable Reported-by: Thomas Renninger <trenn@suse.de> Bisected-by: Thomas Renninger <trenn@suse.de> Tested-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-2-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-15ACPI: remove Asus P2B-DS from acpi=ht blacklistLen Brown
commit 97c169d39b6846a564dc8d883832e7fef9bdb77d upstream. We realized when we broke acpi=ht http://bugzilla.kernel.org/show_bug.cgi?id=14886 that acpi=ht is not needed on this box and folks have been using acpi=force on it anyway. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-29Merge branch 'for-ingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6 into x86/apic Merge reason: the SFI (Simple Firmware Interface) feature in the ACPI tree needs this cleanup, pull it into the APIC branch as well so that there's no interactions. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=nFeng Tang
Some IO-APIC routines are ACPI specific now, but need to be exposed when CONFIG_ACPI=n for the benefit of SFI. Remove #ifdef ACPI around these routines: io_apic_get_unique_id(int ioapic, int apic_id); io_apic_get_version(int ioapic); io_apic_get_redir_entries(int ioapic); Move these routines from ACPI-specific boot.c to io_apic.c: uniq_ioapic_id(u8 id) mp_find_ioapic() mp_find_ioapic_pin() mp_register_ioapic() Also, since uniq_ioapic_id() is now no longer static, re-name it to io_apic_unique_id() for consistency with the other public io_apic routines. For simplicity, do not #ifdef the resulting code ACPI || SFI, thought that could be done in the future if it is important to optimize the !ACPI !SFI IO-APIC x86 kernel for size. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: x86@kernel.org
2009-07-14x86/acpi: acpi_parse_madt_ioapic_entries: remove redundant bracesJeremy Fitzhardinge
We don't put braces around a single statement. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-06-24Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', ↵Len Brown
'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release
2009-06-12ACPI, PCI, x86: move MCFG parsing routine from ACPI to PCI fileLen Brown
Move arch/x86/kernel/acpi/boot.c: acpi_parse_mcfg() to arch/x86/pci/mmconfig-shared.c: pci_parse_mcfg() where it is used, and make it static. Move associated globals and helper routine with it. No functional change. This code move is in preparation for SFI support, which will allow the PCI code to find the MCFG table on systems which do not support ACPI. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-12ACPI: Remove Asus P4B266 from blacklistOlivier Berger
See http://marc.info/?l=linux-acpi&m=124068823904429&w=2 for discussion Signed-off-by: Olivier Berger <oberger@ouvaton.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-12ACPI: delete dead acpi_disabled setting codeLen Brown
Testing CONFIG_ACPI inside boot.c is a waste of text, since boot.c is built only when CONFIG_ACPI=y Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-02x86: Print real IOAPIC version for x86-64Naga Chumbalkar
Fix the fact that the IOAPIC version number in the x86_64 code path always gets assigned to 0, instead of the correct value. Before the patch: (from "dmesg" output): ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 <--- After the patch: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 <--- History: io_apic_get_version() was compiled out of the x86_64 code path in the commit f2c2cca3acef8b253a36381d9b469ad4fb08563a: Author: Andi Kleen <ak@suse.de> Date: Tue Sep 26 10:52:37 2006 +0200 [PATCH] Remove APIC version/cpu capability mpparse checking/printing ACPI went to great trouble to get the APIC version and CPU capabilities of different CPUs before passing them to the mpparser. But all that data was used was to print it out. Actually it even faked some data based on the boot cpu, not on the actual CPU being booted. Remove all this code because it's not needed. Cc: len.brown@intel.com At the time, the IOAPIC version number was deliberately not printed in the x86_64 code path. However, after the x86 and x86_64 files were merged, the net result is that the IOAPIC version is printed incorrectly in the x86_64 code path. The patch below provides a fix. I have tested it with acpi, and with acpi=off, and did not see any problems. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Acked-by: Yinghai Lu <yhlu.kernel@gmail.com> LKML-Reference: <20090416014230.4885.94926.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu> *************************
2009-05-18x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabledYinghai Lu
Len expressed concern that the update_mptable feature has side-effects on the ACPI code. Make it sure explicitly that the code only ever gets called if the (default disabled) update_mptable boot quirk option is disabled. [ Impact: isolate the update_mptable feature from ACPI code more ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A0DC832.5090200@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18x86, apic: introduce io_apic_irq_attrYinghai Lu
according to Ingo, io_apic irq-setup related functions have too many parameters with a repetitive signature. So reduce related funcs to get less params by passing a pointer to a newly defined io_apic_irq_attr structure. v2: io_apic_irq ==> irq_attr triggering ==> trigger v3: add set_io_apic_irq_attr [ Impact: cleanup ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A08ACD3.2070401@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: move pin_programmed bit map to io_apic.cYinghai Lu
Prepare to call setup_io_apic_routing() in pcibios_irq_enable() also remove not needed member apic_id. [ Impact: clean up, prepare for future change ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C3DD.3050104@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi()Yinghai Lu
The patch to call mp_config_acpi_gsi() from the ACPI IRQ registration code never got mainline because there were open discussions about it. This call is needed to properly update the kernel's copy of the mptable, when the update_mptable boot parameter is needed. Now that the dust has settled with the APIC unification, and since there were no objections when the patch was re-submitted, try this again. [ Impact: fix the update_mptable boot parameter ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C387.7090103@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11x86/acpi: remove irq-compression trick on 32-bitYinghai Lu
We already have a per cpu vector on 32-bit via recent changes, and don't need this trick any more (which trick obfuscates the real GSI mappings and which only triggers on larger systems to begin with): On 3 ioapic system (24 per ioapic) before patch I got: ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71 IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 64 Mode:1 Active:1) pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 64 ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67 IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 65 Mode:1 Active:1) pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66 IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1) pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65 IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 67 Mode:1 Active:1) pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64 IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 68 Mode:1 Active:1) pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 67 pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 68 pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 65 after the patch we get: ACPI: PCI Interrupt Link [ILSB] enabled at IRQ 71 IOAPIC[2]: Set routing entry (10-23 -> 0xa9 -> IRQ 71 Mode:1 Active:1) pci 0000:80:01.1: PCI INT A -> Link[ILSB] -> GSI 71 (level, low) -> IRQ 71 ACPI: PCI Interrupt Link [LE5B] enabled at IRQ 67 IOAPIC[2]: Set routing entry (10-19 -> 0xb1 -> IRQ 67 Mode:1 Active:1) pci 0000:83:00.0: PCI INT B -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 ACPI: PCI Interrupt Link [LE5A] enabled at IRQ 66 IOAPIC[2]: Set routing entry (10-18 -> 0xb9 -> IRQ 66 Mode:1 Active:1) pci 0000:83:00.1: PCI INT A -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 ACPI: PCI Interrupt Link [LE5D] enabled at IRQ 65 IOAPIC[2]: Set routing entry (10-17 -> 0xc1 -> IRQ 65 Mode:1 Active:1) pci 0000:84:00.0: PCI INT B -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 ACPI: PCI Interrupt Link [LE5C] enabled at IRQ 64 IOAPIC[2]: Set routing entry (10-16 -> 0xc9 -> IRQ 64 Mode:1 Active:1) pci 0000:84:00.1: PCI INT A -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:87:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:87:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 pci 0000:88:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:88:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 pci 0000:8b:00.0: PCI INT B -> Link[LE5A] -> GSI 66 (level, low) -> IRQ 66 pci 0000:8b:00.1: PCI INT A -> Link[LE5D] -> GSI 65 (level, low) -> IRQ 65 pci 0000:8c:00.0: PCI INT B -> Link[LE5C] -> GSI 64 (level, low) -> IRQ 64 pci 0000:8c:00.1: PCI INT A -> Link[LE5B] -> GSI 67 (level, low) -> IRQ 67 As it can be seen that GSIs now get mapped lineary. [ Impact: simplify irq number mapping on bigger 32-bit systems ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4A01C35C.7060207@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28irq: change ACPI GSI APIs to also take a device argumentYinghai Lu
We want to use dev_to_node() later on, to be aware of the 'home node' of the GSI in question. [ Impact: cleanup, prepare the IRQ code to be more NUMA aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-acpi@vger.kernel.org Cc: linux-ia64@vger.kernel.org LKML-Reference: <49F65560.20904@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-05Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05Merge branch 'misc' into releaseLen Brown
2009-04-03x86, ACPI: add support for x2apic ACPI extensionsSuresh Siddha
All logical processors with APIC ID values of 255 and greater will have their APIC reported through Processor X2APIC structure (type-9 entry type) and all logical processors with APIC ID less than 255 will have their APIC reported through legacy Processor Local APIC (type-0 entry type) only. This is the same case even for NMI structure reporting. The Processor X2APIC Affinity structure provides the association between the X2APIC ID of a logical processor and the proximity domain to which the logical processor belongs. For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device() objects in the ACPI namespace. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03ACPI: update commentZhang Rui
update ACPI Development Discussion List Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-17x86, apic: remove duplicate asm/apic.h inclusionsIngo Molnar
Impact: cleanup Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17x86, apic: remove genapic.hIngo Molnar
Impact: cleanup Remove genapic.h and remove all references to it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13Merge branches 'x86/acpi', 'x86/asm', 'x86/cpudetect', 'x86/crashdump', ↵Ingo Molnar
'x86/debug', 'x86/defconfig', 'x86/doc', 'x86/header-fixes', 'x86/headers' and 'x86/minor-fixes' into x86/core
2009-02-09x86: add mp_find_ioapic_pinJeremy Fitzhardinge
Add mp_find_ioapic_pin() to find an IO APIC's specific pin from a GSI, and use this function within acpi/boot. Make it non-static so other code can use it too. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-09x86: unstatic mp_find_ioapic so it can be used elsewhereJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-02-09acpi/x86: introduce __apci_map_table, v4Yinghai Lu
to prevent wrongly overwriting fixmap that still want to use. ACPI used to rely on low mappings being all linearly mapped and grew a habit: it never really unmapped certain kinds of tables after use. This can cause problems - for example the hypothetical case when some spurious access still references it. v2: remove prev_map and prev_size in __apci_map_table v3: let acpi_os_unmap_memory() call early_iounmap too, so remove extral calling to early_acpi_os_unmap_memory v4: fix typo in one acpi_get_table_with_size calling Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09acpi: remove final __acpi_map_table mapping before setting ↵Jeremy Fitzhardinge
acpi_gbl_permanent_mmap On x86, __acpi_map_table uses early_ioremap() to create the mapping, replacing the previous mapping with a new one. Once enough of the kernel is up an running it switches to using normal ioremap(). At that point, we need to clean up the final mapping to avoid a warning from the early_ioremap subsystem. This can be removed after all the instances in the ACPI code are fixed that rely on early-ioremap's implicit overmapping of previously mapped tables. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: always explicitly map acpi memoryJeremy Fitzhardinge
Always map acpi tables, rather than assuming we can use the normal linear mapping to access the acpi tables. This is necessary in a virtual environment where the linear mappings are to pseudo-physical memory, but the acpi tables exist at a real physical address. It doesn't hurt to map in the normal non-virtual case, so just do it unconditionally. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: use early_ioremap in __acpi_map_tableJeremy Fitzhardinge
__acpi_map_table() effectively reimplements early_ioremap(). Rather than have that duplication, just implement it in terms of early_ioremap(). However, unlike early_ioremap(), __acpi_map_table() just maintains a single mapping which gets replaced each call, and has no corresponding unmap function. Implement this by just removing the previous mapping each time its called. Unfortunately, this will leave a stray mapping at the end. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: find nr_irqs_gsi with mp_ioapic_routingYinghai Lu
Impact: find right nr_irqs_gsi on some systems. One test-system has gap between gsi's: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56]) [ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62 ... [ 0.000000] nr_irqs_gsi: 38 So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic. need to get that with acpi_probe_gsi when acpi io_apic is used Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09x86: find nr_irqs_gsi with mp_ioapic_routingYinghai Lu
Impact: find right nr_irqs_gsi on some systems. One test-system has gap between gsi's: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfeafd000] gsi_base[48]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfeafd000, GSI 48-54 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfeafc000] gsi_base[56]) [ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfeafc000, GSI 56-62 ... [ 0.000000] nr_irqs_gsi: 38 So nr_irqs_gsi is not right. some irq for MSI will overwrite with io_apic. need to get that with acpi_probe_gsi when acpi io_apic is used Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-30x86: don't treat bigsmp as non-standardYinghai Lu
just like 64 bit switch from flat logical APIC messages to flat physical mode automatically. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: rename X86_GENERICARCH to X86_32_NON_STANDARDIngo Molnar
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures that are not included in the default build. Rename it to X86_32_NON_STANDARD. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29x86: remove mach_apic.hIngo Molnar
Spread mach_apic.h definitions into genapic.h. (with some knock-on effects on smp.h and apic.h.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86: eliminate asm/mach-*/mach_mpparse.hIngo Molnar
Move the definition to mpparse.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86, apic: clean up ->setup_apic_routing()Ingo Molnar
- separate the namespace - remove macros - remove namespace clash on 64-bit Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28x86: clean up apic->acpi_madt_oem_check methodsIngo Molnar
Impact: refactor code x86 subarchitectures each defined a "acpi_madt_oem_check()" method, which could be an inline function, or an extern, or a static function, and which was also the name of a genapic field. Untangle this namespace spaghetti by setting ->acpi_madt_oem_check() to NULL on those subarchitectures that have no detection quirks, and rename the other ones (summit, es7000) that do. Also change default_acpi_madt_oem_check() to handle NULL entries, and clean its control flow up as well. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14x86: replacing mp_config_intsrc with mpc_intsrcJaswinder Singh Rajput
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14x86: replacing mp_config_ioapic with mpc_ioapicJaswinder Singh Rajput
Impact: cleanup, solve 80 columns wrap problems Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09Merge branch 'linus' into releaseLen Brown
2009-01-09Merge branch 'misc' into releaseLen Brown
Conflicts: include/acpi/acpixf.h Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-09ACPI : Use RSDT instead of XSDT by adding boot option of "acpi=rsdt"Zhao Yakui
On some boxes there exist both RSDT and XSDT table. But unfortunately sometimes there exists the following error when XSDT table is used: a. 32/64X address mismatch b. The 32/64X FACS address mismatch In such case the boot option of "acpi=rsdt" is provided so that RSDT is tried instead of XSDT table when the system can't work well. http://bugzilla.kernel.org/show_bug.cgi?id=8246 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> cc:Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-03x86: use cpumask_var_t in acpi/boot.cRusty Russell
Impact: reduce stack size, use new API. Replace cpumask_t with cpumask_var_t. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_idsMike Travis
Impact: Reduce future system panics due to cpumask operations using NR_CPUS Insure that code does not look at bits >= nr_cpu_ids as when cpumasks are allocated based on nr_cpu_ids, these extra bits will not be defined. Also some other minor updates: * change in to use cpu accessor function set_cpu_present() instead of directly accessing cpu_present_map w/cpu_clear() [arch/x86/kernel/reboot.c] * use cpumask_of() instead of &cpumask_of_cpu() [arch/x86/kernel/reboot.c] * optimize some cpu_mask_to_apicid_and functions. Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-23ACPI: disable MPS when NO APIC-table foundLen Brown
When ACPI is asked to find an MADT (APIC table) and fails, then ACPI expects to run in PIC mode. However, if an MP Table is was found, IRQs will be registered as if an IOAPIC is being used, even though ACPI is configuring interrupt links links for PIC mode. In this scenario, disable MPS so that IRQs are registered in PIC mode, consistent with ACPI. http://bugzilla.kernel.org/show_bug.cgi?id=12257 Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-08x86: clean up get_smp_config()Yinghai Lu
Impact: cleanup reorder exit path in __get_smp_config(). also move two print outs to acpi_process_madt Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11ACPI: pci_link: remove acpi_irq_balance_set() interfaceBjorn Helgaas
This removes the acpi_irq_balance_set() interface from the PCI interrupt link driver. x86 used acpi_irq_balance_set() to tell the PCI interrupt link driver to configure links to minimize IRQ sharing. But the link driver can easily figure out whether to turn on IRQ balancing based on the IRQ model (PIC/IOAPIC/etc), so we can get rid of that external interface. It's better for the driver to figure this out at init-time. If we set it externally via the x86 code, the interface reduces modularity, and we depend on the fact that acpi_process_madt() happens before we process the kernel command line. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix section mismatch warning - apic_x2apic_phys x86: fix section mismatch warning - apic_x2apic_cluster x86: fix section mismatch warning - apic_x2apic_uv_x x86: fix section mismatch warning - apic_physflat x86: fix section mismatch warning - apic_flat x86: memtest fix use of reserve_early() x86 syscall.h: fix argument order x86/tlb_uv: remove strange mc146818rtc include x86: remove redundant KERN_DEBUG on pr_debug x86: do_boot_cpu - check if we have ESR register x86: MAINTAINERS change for AMD microcode patch loader x86/proc: fix /proc/cpuinfo cpu offline bug x86: call dmi-quirks for HP Laptops after early-quirks are executed x86, kexec: fix hang on i386 when panic occurs while console_sem is held MCE: Don't run 32bit machine checks with interrupts on x86: SB600: skip IRQ0 override if it is not routed to INT2 of IOAPIC x86: make variables static
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-01 09:15:24 +0000